Occupational exposure to diisononyl phthalate (DiNP) in polyvinyl chloride processing operations

PURPOSE: Diisononyl phthalate (DiNP) is primarily used as a plasticizer in polyvinyl chloride (PVC) materials. While information is available on general population exposure to DiNP, occupational exposure data are lacking. We present DiNP metabolite urinary concentrations in PVC processing workers, estimate DiNP daily intake for these workers, and compare worker estimates to other populations. METHODS: We assessed DiNP exposure in participants from two companies that manufactured PVC materials, a PVC film manufacturer (n = 25) and a PVC custom compounder (n = 12). A mid-shift and end-shift urine sample was collected from each participant and analyzed for the DiNP metabolite mono(carboxy-isooctyl) phthalate (MCiOP). Mixed models were used to assess the effect on MCiOP concentrations of a worker being assigned to (1) a task using DiNP and (2) a shift where DiNP was used. A simple pharmacokinetic model was used to estimate DiNP daily intake from the MCiOP concentrations. RESULTS: Creatinine-adjusted MCiOP urinary concentrations ranged from 0.42-80 μg/g in PVC film and from 1.11-13.4 μg/g in PVC compounding. PVC film participants who worked on a task using DiNP (n = 7) had the highest MCiOP geometric mean (GM) end-shift concentration (25.2 μg/g), followed by participants who worked on a shift where DiNP was used (n = 11) (17.7 μg/g) as compared to participants with no task (2.92 μg/g) or shift (2.08 μg/g) exposure to DiNP. The GM end-shift MCiOP concentration in PVC compounding participants (4.80 μg/g) was comparable to PVC film participants with no task or shift exposure to DiNP. Because no PVC compounding participants were assigned to tasks using DINP on the day sampled, DiNP exposure in this company may be underestimated. The highest DiNP intake estimate was 26 μg/kg/day. CONCLUSION: Occupational exposure to DiNP associated with PVC film manufacturing tasks were substantially higher (sixfold to tenfold) than adult general population exposures; however, all daily intake estimates were less than 25% of current United States or European acceptable or tolerable daily intake estimates. Further characterization of DiNP occupational exposures in other industries is recommended.

Which factors influence glycemic control in the intensive care unit?

PURPOSE OF REVIEW: Intensive insulin therapy titrated to restore and maintain blood glucose between 80 and 110 mg/dl (4.4-6.1 mmol/l) was found to improve survival of critically ill patients in one pioneering proof-of-concept study performed in a surgical intensive care unit. The external validity of these findings was investigated. RECENT FINDINGS: Six independent prospective randomized controlled trials, involving 9877 patients in total, were unable to confirm the survival benefit reported in the pioneering trial. Several hypotheses were proposed to explain this discrepancy, including the case-mix, the features of the usual care, the quality of glucose control and the risks associated with hypoglycemia. SUMMARY: Before a better understanding and delineation of the conditions associated with and improved outcome by tight glycemic control, the choice of an intermediate glycemic target appears as a safe and effective solution.

Spatial processing for frequency diversity schemes

A novel technique to obtain optimum blind spatialprocessing for frequency diversity spread spectrum (FDSS) communicationsystems is introduced. The sufficient statistics for alinear combiner, which prove ineffective due to the interferers frequencycharacteristics, are modified to yield improved detectionunder partial jamming in the spectral domain. Robustness to partialtime jamming is achieved by extending the notion of replicasover the frequency axis to a repetition over the time variable. Analysisand simulations are provided, showing the advantages of usingFDSS with spatial diversity to combat the interference when it isconfined to a narrow frequency band or short time interval relativeto the desired signal extent in either domain.

Statistical reference criteria for adaptive signal processing in digital communications

A general criterion for the design of adaptive systemsin digital communications called the statistical reference criterionis proposed. The criterion is based on imposition of the probabilitydensity function of the signal of interest at the outputof the adaptive system, with its application to the scenario ofhighly powerful interferers being the main focus of this paper.The knowledge of the pdf of the wanted signal is used as adiscriminator between signals so that interferers with differingdistributions are rejected by the algorithm. Its performance isstudied over a range of scenarios. Equations for gradient-basedcoefficient updates are derived, and the relationship with otherexisting algorithms like the minimum variance and the Wienercriterion are examined.

Temporal dynamics of auditory what and where processing in humans

Recent evidence suggests the human auditory system is organized,like the visual system, into a ventral 'what' pathway, devoted toidentifying objects and a dorsal 'where' pathway devoted to thelocalization of objects in space w1x. Several brain regions have beenidentified in these two different pathways, but until now little isknown about the temporal dynamics of these regions. We investigatedthis issue using 128-channel auditory evoked potentials(AEPs).Stimuli were stationary sounds created by varying interaural timedifferences and environmental real recorded sounds. Stimuli ofeach condition (localization, recognition) were presented throughearphones in a blocked design, while subjects determined theirposition or meaning, respectively.AEPs were analyzed in terms of their topographical scalp potentialdistributions (segmentation maps) and underlying neuronalgenerators (source estimation) w2x.Fourteen scalp potential distributions (maps) best explained theentire data set.Ten maps were nonspecific (associated with auditory stimulationin general), two were specific for sound localization and two werespecific for sound recognition (P-values ranging from 0.02 to0.045).Condition-specific maps appeared at two distinct time periods:;200 ms and ;375-550 ms post-stimulus.The brain sources associated with the maps specific for soundlocalization were mainly situated in the inferior frontal cortices,confirming previous findings w3x. The sources associated withsound recognition were predominantly located in the temporal cortices,with a weaker activation in the frontal cortex.The data show that sound localization and sound recognitionengage different brain networks that are apparent at two distincttime periods.References1. Maeder et al. Neuroimage 2001.2. Michel et al. Brain Research Review 2001.3. Ducommun et al. Neuroimage 2002.

Étude des mécanismes de transfert des fibres en sciences forensiques

RESUME Les fibres textiles sont des produits de masse utilisés dans la fabrication de nombreux objets de notre quotidien. Le transfert de fibres lors d'une action délictueuse est dès lors extrêmement courant. Du fait de leur omniprésence dans notre environnement, il est capital que l'expert forensique évalue la valeur de l'indice fibres. L'interprétation de l'indice fibres passe par la connaissance d'un certain nombre de paramètres, comme la rareté des fibres, la probabilité de leur présence par hasard sur un certain support, ainsi que les mécanismes de transfert et de persistance des fibres. Les lacunes les plus importantes concernent les mécanismes de transfert des fibres. A ce jour, les nombreux auteurs qui se sont penchés sur le transfert de fibres ne sont pas parvenus à créer un modèle permettant de prédire le nombre de fibres que l'on s'attend à retrouver dans des circonstances de contact données, en fonction des différents paramètres caractérisant ce contact et les textiles mis en jeu. Le but principal de cette recherche est de démontrer que la création d'un modèle prédictif du nombre de fibres transférées lors d'un contact donné est possible. Dans le cadre de ce travail, le cas particulier du transfert de fibres d'un tricot en laine ou en acrylique d'un conducteur vers le dossier du siège de son véhicule a été étudié. Plusieurs caractéristiques des textiles mis en jeu lors de ces expériences ont été mesurées. Des outils statistiques (régression linéaire multiple) ont ensuite été utilisés sur ces données afin d'évaluer l'influence des caractéristiques des textiles donneurs sur le nombre de fibres transférées et d'élaborer un modèle permettant de prédire le nombre de fibres qui vont être transférées à l'aide des caractéristiques influençant significativement le transfert. Afin de faciliter la recherche et le comptage des fibres transférées lors des expériences de transfert, un appareil de recherche automatique des fibres (liber finder) a été utilisé dans le cadre de cette recherche. Les tests d'évaluation de l'efficacité de cet appareil pour la recherche de fibres montrent que la recherche automatique est globalement aussi efficace qu'une recherche visuelle pour les fibres fortement colorées. Par contre la recherche automatique perd de son efficacité pour les fibres très pâles ou très foncées. Une des caractéristiques des textiles donneurs à étudier est la longueur des fibres. Afin de pouvoir évaluer ce paramètre, une séquence d'algorithmes de traitement d'image a été implémentée. Cet outil permet la mesure de la longueur d'une fibre à partir de son image numérique à haute résolution (2'540 dpi). Les tests effectués montrent que les mesures ainsi obtenues présentent une erreur de l'ordre du dixième de millimètre, ce qui est largement suffisant pour son utilisation dans le cadre de cette recherche. Les résultats obtenus suite au traitement statistique des résultats des expériences de transfert ont permis d'aboutir à une modélisation du phénomène du transfert. Deux paramètres sont retenus dans le modèle: l'état de la surface du tissu donneur et la longueur des fibres composant le tissu donneur. L'état de la surface du tissu est un paramètre tenant compte de la quantité de fibres qui se sont détachées de la structure du tissu ou qui sont encore faiblement rattachées à celle-ci. En effet, ces fibres sont les premières à se transférer lors d'un contact, et plus la quantité de ces fibres par unité de surface est importante, plus le nombre de fibres transférées sera élevé. La longueur des fibres du tissu donneur est également un paramètre important : plus les fibres sont longues, mieux elles sont retenues dans la structure du tissu et moins elles se transféreront. SUMMARY Fibres are mass products used to produce numerous objects encountered everyday. The transfer of fibres during a criminal action is then very common. Because fibres are omnipresent in our environment, the forensic expert has to evaluate the value of the fibre evidence. To interpret fibre evidence, the expert has to know some parameters as frequency of fibres,' probability of finding extraneous fibres by chance on a given support, and transfer and persistence mechanisms. Fibre transfer is one of the most complex parameter. Many authors studied fibre transfer mechanisms but no model has been created to predict the number of fibres transferred expected in a given type of contact according to parameters as characteristics of the contact and characteristics of textiles. The main purpose of this research is to demonstrate that it is possible to create a model to predict the number of fibres transferred during a contact. In this work, the particular case of the transfer of fibres from a knitted textile in wool or in acrylic of a driver to the back of a carseat has been studied. Several characteristics of the textiles used for the experiments were measured. The data obtained were then treated with statistical tools (multiple linear regression) to evaluate the influence of the donor textile characteristics on the number of úbers transferred, and to create a model to predict this number of fibres transferred by an equation containing the characteristics having a significant influence on the transfer. To make easier the searching and the counting of fibres, an apparatus of automatic search. of fibers (fiber finder) was used. The tests realised to evaluate the efficiency of the fiber finder shows that the results obtained are generally as efficient as for visual search for well-coloured fibres. However, the efficiency of automatic search decreases for pales and dark fibres. One characteristic of the donor textile studied was the length of the fibres. To measure this parameter, a sequence of image processing algorithms was implemented. This tool allows to measure the length of a fibre from it high-resolution (2'540 dpi) numerical image. The tests done shows that the error of the measures obtained are about some tenths of millimetres. This precision is sufficient for this research. The statistical methods applied on the transfer experiment data allow to create a model of the transfer phenomenon. Two parameters are included in the model: the shedding capacity of the donor textile surface and the length of donor textile fibres. The shedding capacity of the donor textile surface is a parameter estimating the quantity of fibres that are not or slightly attached to the structure of the textile. These fibres are easily transferred during a contact, and the more this quantity of fibres is high, the more the number of fibres transferred during the contact is important. The length of fibres is also an important parameter: the more the fibres are long, the more they are attached in the structure of the textile and the less they are transferred during the contact.

Pohjaöljyn käsittely

Diplomityön tarkoituksena oli tutkia Naantalin jalostamolle soveltuvaa pohjaöljyn käsittely-yksikköä syntyvän raskaan polttoöljyn määrän vähentämiseksi. Kirjallisuusosassa tutkittiin eri prosessivaihtoehtoja pohjaöljyn käsittelylle. Prosesseista selvitettiin käytettävät syötöt, prosessiolosuhteet, saatavat tuotteet ja niiden saannot sekä prosessin investointi- ja käyttökustannukset. Lisäksi tutkittiin tuotteiden käyttökohteita ja niiden vaatimia jatkokäsittelyjä. Työn tutkimusosassa valittiin tarkasteltavaksi prosessiksi ylikriittinen uutto, deasfaltointi. Työssä tarkasteltiin uuttoyksikön eri kytkentävaihtoehtoja Naantalin jalostamolle ja valittiin käytettävät uuttoprosentit ja liuottimet. Yksiköstä saataville tuotteille laskettiin aineominaisuudet. Deasfaltoidun öljyn käsittelyyn suunnitelluille katalyyttisille krakkausyksiköille tehtiin saantoarviot ja laskettiin massataseet. Deasfaltointiyksikön pohjatuotteena saatavan asfalteenirikasteen jatkokäsittelyssä tutkittiin bitumin, raskaan ja erikoisraskaan polttoöljyn sekä bitumikomponentin valmistusta. Vaihtoehdoista laskettiin massataseet ja tuotteiden aineominaisuudet. Prosessivaihtoehdoista tehtiin kannattavuustarkastelu vuotuisten käyttökatteiden perusteella, joita verrattiin nykyiseen jalostamorakenteeseen perustuvaan perus-tapaukseen. Lopuksi tehtiin yhteenveto ja annettiin ehdotuksia jatkotutkimuksille.

Altered processing of contextual information during fear extinction in PTSD: an fMRI study.

Medial prefrontal cortical areas have been hypothesized to underlie altered contextual processing in posttraumatic stress disorder (PTSD). We investigated brain signaling of contextual information in this disorder. Eighteen PTSD subjects and 16 healthy trauma-exposed subjects underwent a two-day fear conditioning and extinction paradigm. On day 1, within visual context A, a conditioned stimulus (CS) was followed 60% of the time by an electric shock (conditioning). The conditioned response was then extinguished (extinction learning) in context B. On day 2, recall of the extinction memory was tested in context B. Skin conductance response (SCR) and functional magnetic resonance imaging (fMRI) data were collected during context presentations. There were no SCR group differences in any context presentation. Concerning fMRI data, during late conditioning, when context A signaled danger, PTSD subjects showed dorsal anterior cingulate cortical (dACC) hyperactivation. During early extinction, when context B had not yet fully acquired signal value for safety, PTSD subjects still showed dACC hyperactivation. During late extinction, when context B had come to signal safety, they showed ventromedial prefrontal cortex (vmPFC) hypoactivation. During early extinction recall, when context B signaled safety, they showed both vmPFC hypoactivation and dACC hyperactivation. These findings suggest that PTSD subjects show alterations in the processing of contextual information related to danger and safety. This impairment is manifest even prior to a physiologically-measured, cue-elicited fear response, and characterized by hypoactivation in vmPFC and hyperactivation in dACC.

Kuparituotetehtaan tuoterakenteen ja logistisen tehokkuuden kehittäminen

Tässä tutkimuksessa on keskitytty tutkimaan kuparituotetehtaan tuoterakennetta ja tilausten kohdistumispisteitä sekä esittämäänparannusehdotuksia näiden suhteen. Valssaamon prosessivarasto on kokenut huomattavan pienennyksen ja tavoitteena on, että tästä huolimatta tuotantoa pystyttäisiin ohjaamaan vähemmin resurssein, materiaalipulasta kärsimättä ja nopeammin läpimenoajoin. Lisäksi työssä esitetään muita tuotantoprosessiin liittyviä kehitysehdotuksia, jotka tukevat tuotannon virtaviivaistamista ja varastosaldojen vähentämistä. Teoriaosuudessa selitetään Lean-tuotannon toimivuuttavalssaamon kaltaisessa toimintaympäristössä. Teoriaosuudessa on käsitelty Lean-tuotannon lisäksi myös Agile- ja Leagile-teorioita, koska myös näiden teorioidenyhteensopivuus valssaamon tuotantoon on merkittävä. Empiirisessä osassa on kuvattu tuotantoprosessin ja tuoterakenteen nykytila sekä esitetty kehitysehdotuksianäiden kehittämiseen esiteltyjen teorioiden pohjalta. Tutkimuksen perusteella esitetään muutoksia tämänhetkiseen tuoterakenteeseen, koska nykyisen kaltainen tuoterakenne on jäänyt osittain turhaksi varastojen siirryttyä tuotannon alkupäähän. Lisäksi ehdotetaan kuumavalssaussuunnitelmasta luopumista ja kuumavalssaimen ohjaussyklin lyhentämistä vuorokauden mittaiseksi, sekä esitetään, miten tuotantoon tulisi välittää nykyistä tarkempaa tietoa tilauksien valmistumisajankohdista.

International comparison of Russian food processing industry -Finnish perspective

Työn päätavoitteena on kartoittaa Venäjän elintarviketeollisuutta ulkomaisen investoijan näkökulmasta. Tutkimus arvioi liiketoimintamahdollisuuksia ja kilpailutilannetta Venäjän elintarviketeollisuudessa ja auttaa ulkomaisia yrityksiä toteuttamaan liiketoimintastrategioitaan Venäjällä. Venäjän ja muiden siirtymätalousmaiden markkinatilannevertailujen lisäksi Venäjän alueita verrataan keskenään. Myös mahdollisen WTO jäsenyyden vaikutuksia arvioidaan. Kommunismin perintö vaikuttaa edelleen Venäjän elintarviketeollisuuteen ja maatalouteen. Maatalouden tuottavuus on kaukana länsimaisesta tasosta ja maatiloilta puuttuu rahoitusta. Etenkin maidon- ja lihanjalostajat kärsivät raaka-ainepulasta. Venäjän kriisi vuonna 1998 vahvisti paikallista teollisuustuotantoa mutta aiheutti ongelmia ulkomaisille investoijille ja yrityksille, jotka vievät tuotteitaan Venäjälle. Edut, joita mahdollinen maailmankauppajärjestö WTO:n jäsenyys tuo, ovat merkittävämpiä Venäjälle kuin sen kauppakumppaneille. Venäjän alueet eivät ole yhtäläisesti kehittyneitä ja kuluttajien ostovoima vaihtelee paljon. Itsestään selvin ja houkuttelevin vaihtoehto menestyvien elintarvikeyritysten laajentumiselle löytyy alueilta, joilla ostovoima on suurin. Tähän asti kansainväliset elintarvikeyritykset ovat olleet enemmän kiinnostuneita Itä- ja Keski-Euroopan maista. Käytettävissä olevat tulot ovat Itä- ja Keski-Euroopan maissa suurempia kuin Venäjällä, joten tuottajat pystyvät myymään myös kalliimpia tuotteita. Työvoimakustannukset Venäjällä tulevat olemaan suotuisia vielä muutaman vuosikymmenen ja markkinoiden koko on merkittävä. Siksi kansainvälisillä elintarvikeyrityksillä riittää kiinnostusta tulevaisuudessa investoida myös Venäjälle.

Forensic processing of false identity and travel documents to produce intelligence: a novel approach to assist in fighting organized crime

The production and use of false identity and travel documents in organized crime represent a serious and evolving threat. However, a case-by-case perspective, thus suffering from linkage blindness and a limited analysis capacity, essentially drives the present-day fight against this criminal problem. To assist in overcoming these limitations, a process model was developed using a forensic perspective. It guides the systematic analysis and management of seized false documents to generate forensic intelligence that supports strategic and tactical decision-making in an intelligence-led policing approach. The model is articulated on a three-level architecture that aims to assist in detecting and following-up on general trends, production methods and links between cases or series. Using analyses of a large dataset of counterfeit and forged identity and travel documents, it is possible to illustrate the model, its three levels and their contribution. Examples will point out how the proposed approach assists in detecting emerging trends, in evaluating the black market's degree of structure, in uncovering criminal networks, in monitoring the quality of false documents, and in identifying their weaknesses to orient the conception of more secured travel and identity documents. The process model proposed is thought to have a general application in forensic science and can readily be transposed to other fields of study.

Multi-slice three-dimensional myocardial strain tensor quantification using zHARP.

In this article we propose a novel method for calculating cardiac 3-D strain. The method requires the acquisition of myocardial short-axis (SA) slices only and produces the 3-D strain tensor at every point within every pair of slices. Three-dimensional displacement is calculated from SA slices using zHARP which is then used for calculating the local displacement gradient and thus the local strain tensor. There are three main advantages of this method. First, the 3-D strain tensor is calculated for every pixel without interpolation; this is unprecedented in cardiac MR imaging. Second, this method is fast, in part because there is no need to acquire long-axis (LA) slices. Third, the method is accurate because the 3-D displacement components are acquired simultaneously and therefore reduces motion artifacts without the need for registration. This article presents the theory of computing 3-D strain from two slices using zHARP, the imaging protocol, and both phantom and in-vivo validation.

Targeting the proteolytic processing of the viral glycoprotein precursor is a promising novel antiviral strategy against arenaviruses.

A crucial step in the arenavirus life cycle is the biosynthesis of the viral envelope glycoprotein (GP) responsible for virus attachment and entry. Processing of the GP precursor (GPC) by the cellular proprotein convertase site 1 protease (S1P), also known as subtilisin-kexin-isozyme 1 (SKI-1), is crucial for cell-to-cell propagation of infection and production of infectious virus. Here, we sought to evaluate arenavirus GPC processing by S1P as a target for antiviral therapy using a recently developed peptide-based S1P inhibitor, decanoyl (dec)-RRLL-chloromethylketone (CMK), and the prototypic arenavirus lymphocytic choriomeningitis virus (LCMV). To control for off-target effects of dec-RRLL-CMK, we employed arenavirus reverse genetics to introduce a furin recognition site into the GPC of LCMV. The rescued mutant virus grew to normal titers, and the processing of its GPC critically depended on cellular furin, but not S1P. Treatment with the S1P inhibitor dec-RRLL-CMK resulted in specific blocking of viral spread and virus production of LCMV. Combination of the protease inhibitor with ribavirin, currently used clinically for treatment of human arenavirus infections, resulted in additive drug effects. In cells deficient in S1P, the furin-dependent LCMV variant established persistent infection, whereas wild-type LCMV underwent extinction without the emergence of S1P-independent escape variants. Together, the potent antiviral activity of an inhibitor of S1P-dependent GPC cleavage, the additive antiviral effect with ribavirin, and the low probability of emergence of S1P-independent viral escape variants make S1P-mediated GPC processing by peptide-derived inhibitors a promising strategy for the development of novel antiarenaviral drugs.

A Feasibility Study of a Pelleting Plant as an Option for By Product Upgrading in Wood-Processing Industry

Tämän kannattavuustutkimuksen lähtökohtana oli se, että Yhtyneet Sahat Oy:n Kaukaan sahalla ja Luumäen jatkojalostuslaitoksella haluttiin selvittää pellettitehtaan kannattavuus nykyisessä markkinatilanteessa. Tämä työon luonteeltaan teknis-taloudellinen selvitys eli ns. feasibility study. Pelletöintiprosessi on tekniikaltaan yksinkertainen eikä edellytä korkea teknologian laitteita. Toimiala on maailmanlaajuisesti varsin uusi. Suomessa pellettimarkkinat ovat vielä pienet ja kehittymättömät, mutta kasvua on viime vuosina tapahtunut. Valtaosa kotimaan tuotannosta menee vientiin. Investoinnin laskentaprosessissa saadut tuotannon alkuarvot sekä kustannusrakenteen määrittelyt ovat perustana varsinaisille kannattavuuslaskelmille. Laskelmista on selvitetty investointeihin liittyvät yleisimmät taloudelliset tunnusluvut ja herkimpiä muuttujia on tutkittu ja pohdittu herkkyysanalyysiä apuna käyttäen.