De-escalation of commitment management strategy in IT project management methodology: case of ERP implementation project by IT consulting company

According to several surveys and observations, the percentage of successfully conducted IT projects without over-budgeting and delays in time schedule are extremely low. Many projects also are evaluated as failures in terms of delivered functionality. Nuldén (1996) compares IT projects with bad movies; after watching for 2 hours, one still tries to finish it even though one understands that it is a complete waste of time. The argument for that is 'I've already invested too much time to terminate it now'. The same happens with IT projects: sometimes the company continues wasting money on these projects for a long time, even though there are no expected benefits from these projects. Eventually these projects are terminated anyway, but until this moment, the company spends a lot. The situation described above is a consequence of “escalation of commitment” - project continuation even after a manager receives negative feedback of the project’s success probability. According to Keil and Mähring (2010), even though escalation can occur in any type of project, it is more common among complex technological projects, such as IT projects. Escalation of commitment very often results in runaway projects. In order to avoid it, managers use de-escalation strategies, which allow the resources to be used in more effective. These strategies lead to project termination or turning around, which stops the flow of wasted investments. Numbers of researches explore escalation of commitment phenomena based on experiments and business cases. Moreover, during the last decade several frameworks were proposed for de-escalation strategy. However, there is no evidence of successful implementation of the de-escalation of commitment strategy in the literature. In addition, despite that fact that IT project management methodologies are widely used in the companies, none of them cover the topic of escalation of commitment risks. At the same time, there are no researches proposing the way to implement de-escalation of commitment strategy into the existing project management methodology The research is focused on a single case of large ERP implementation project by the consulting company. Hence, the main deliverables of the study include suggestions of improvement in de-escalation methods and techniques in the project and in the company. Moreover, the way to implement these methods into existing project management methodology and into the company general policies is found.

Application of the scrum framework in non-software project management

Scrum is an agile project management approach that has been widely practiced in the software development projects. It has proven to increase quality, productivity, customer satisfaction, transparency and team morale among other benefits from its implementation. The concept of scrum is based on the concepts of incremental innovation strategies, lean manufacturing, kaizen, iterative development and so on and is usually contrasted with the linear development models such as the waterfall method in the software industry. The traditional approaches to project management such as the waterfall method imply intensive upfront planning and approval of the entire project. These sort of approaches work well in the well-defined stable environments where all the specifications of the project are known in the beginning. However, in the uncertain environments when a project requires continuous development and incorporation of new requirements, they do not tend to work well. The scrum framework was inspiraed by Nonaka’s article about new product developement and was later adopted by software development practitioners. This research explores conditions for and benefits of the application of scrum framework beyond software development projects. There are currently a few case studies on the scrum implementation in non-software projects, but there is a noticeable trend of it in the scrum practitioners’ community. The research is based on the real-life context multiple case study analysis of three different non-software projects. The results of the research showed that in order to succeed within scrum projects need to satisfy certain conditions – necessary and sufficient. Among them the key factors are uncertainty of the project environment, not well defined outcomes, commitment of the scrum teams and management support. The top advantages of scrum implementation identified in the present research include improved transparency, accountability, team morale, communications, cooperation and collaboration. Further researches are advised to be carried out in order to validate these findings on a larger sample and to focus on more specific areas of scrum project management implementation.

Profitability planning of the ski resort project

Objective of this master’s thesis is to create an investment calculation model, which makes it possible to determine if the ski resort business can be profitable. The ultimate goal is to create a description with the help of theoretical knowledge, interviews and investment calculation model, how the operation of ski resort is possible to be profitable and what are the critical success factors for achieving this goal. Thesis is carried out as qualitative research, which is supported by the necessary constructive information utilizing calculations. The client company has provided valuable insights and material for this thesis. Theoretical report examines the steps of developing a business plan, investment components and methods as well as sensitivity analysis. The theoretical part is based on the articles, textbooks, interviews and researches. The empirical part of the thesis is assembled by benchmarking other same size Finnish ski resorts, conducting interviews and using investment calculation model. The empirical part provides comprehensive information about ski resort industry, the future of the project, the business plan and the profitability calculations. As the result of this thesis the investment calculation model, which makes it possible to simulate different scenarios for ski resort project, was formed. The model was used to create a picture in which kind of scenario the ski resort business would be profitable and what are the critical success factors in achieving this aim.

The Rebirth of Dinamo Riga: From the Glorious Soviet Past to the Kontinental Hockey League

Since the end of Cold War rivalries, the world of international hockey was deemed to becoming increasingly homogenized along western sportization patterns. The introduction of the Russian-sponsored Kontinental Hockey League (KHL) signified a new era in the global diffusion of modern sports. Its recent expansion in the post-Soviet space and European countries significantly reshuffled the landscape of international hockey, offering new prospects for the studies of the intersection of sports, history, geopolitics and nationalism in the age of globalization. The aim of this study is to conceptualize the KHL and illuminate the role of ice hockey in post-Soviet Latvia. I treat the creation of the KHL and the integration of a Latvian-based team, “Dinamo Riga,” into the KHL within the broader discussion on the globalization of sports and its effects on national communities. The research is based on a case study of the modern rebirth of “Dinamo Riga” and its participation in the KHL and is confined to the scholarly themes in sports research, such as the history of modern sports and globalization, sports and nationalism. The study pays special attention to unveiling the geopolitical links between the restart of Latvian-Russian relations after the EU’s eastern enlargement and the re-emerging Latvian-Russian contacts in ice hockey. The research concludes that with the creation of the KHL, European hockey received a new charismatic “zone of prestige” for sports interaction. The project of “Dinamo Riga” became the new global phenomenon in Latvian sports in terms of its capabilities to transcend the post-Soviet geopolitical stereotypes in relation to Russia and serve as a new national symbol in the promotion and celebration of Latvian sporting nationalism. Further sociological research would require the clarification of the impact of Latvian-Russian cooperation in hockey on the bilateral relations of both countries and the formation of a national community in Latvia.

Validation and Selection of Transportation Cost Drivers with Advanced Methods

In today's logistics environment, there is a tremendous need for accurate cost information and cost allocation. Companies searching for the proper solution often come across with activity-based costing (ABC) or one of its variations which utilizes cost drivers to allocate the costs of activities to cost objects. In order to allocate the costs accurately and reliably, the selection of appropriate cost drivers is essential in order to get the benefits of the costing system. The purpose of this study is to validate the transportation cost drivers of a Finnish wholesaler company and ultimately select the best possible driver alternatives for the company. The use of cost driver combinations as an alternative is also studied. The study is conducted as a part of case company's applied ABC-project using the statistical research as the main research method supported by a theoretical, literature based method. The main research tools featured in the study include simple and multiple regression analyses, which together with the literature and observations based practicality analysis forms the basis for the advanced methods. The results suggest that the most appropriate cost driver alternatives are the delivery drops and internal delivery weight. The possibility of using cost driver combinations is not suggested as their use doesn't provide substantially better results while increasing the measurement costs, complexity and load of use at the same time. The use of internal freight cost drivers is also questionable as the results indicate weakening trend in the cost allocation capabilities towards the end of the period. Therefore more research towards internal freight cost drivers should be conducted before taking them in use.

The contributions of netnography in new product development

Netnography has been studying in various aspects (e.g. definitions of netnography, application of netngoraphy, conducting procedure…) within different industrial contexts. Besides, there are many studies and researches about new product development in various perspectives, such as new product development models, management of new product development project, or interaction between customers and new product design, and so on. However, the connection and the interaction between netnography and new product development have not been studied recently. This opens opportunities for the writer to study and explore unrevealed issues regarding to applying netnography in new product development. In term of the relation between netnography and new product development, there are numerous of matters need to be explored; for instance, the process of applying netnography in order to benefit to new product development, the involvement degree of netnography in new product development process, or eliminating useless information from netnography so that only crucial data is utilized, and so on. In this thesis, writer focuses on exploring how netnography is applied in new product development process, and what benefits netnography can contribute to the succeed of the project. The aims of this study are to understand how netnography is conducted for new product development purpose, and to analyse the contributions of netnography in the new product development process. To do so, a case-study strategy will be conducted with triple case studies. The case studies are chosen bases on many different criteria in order to select the most relevant cases. Eventually, the writer selected three case studies, which are Sunless tanning product project (HYVE), Listerine (NetBase), and Nivea co-creation and netnography in black and white deodorant. The case study strategy applied in this thesis includes four steps e.g. case selection, data collection, case study analysis, and generating the research outcomes from the analysis. This study of the contributions of netnography in the new product development process may be useful for the readers in many ways. It offers the fundamental knowledge of netnography market research method and basic understanding of new product development process. Additionally, it emphasizes the differences between netnography and other market research methods in order to explain the reasons why many companies and market research agents recently utilized netnography in their market research projects. Furthermore, it highlights the contributions of netnography in the new product development process in order to indicate the importance of netnography in developing new product. Thus, the potential readers of the study can be students, marketers, researchers, product developers, or business managers.

Efficacy of herbicides applied to Digitaria horizontalis plants under different water conditions

This project aimed to relate the control efficiency of ACCase inhibiting herbicides applied post-emergence to Digitaria horizontalis plants under different soil water contents. The experiments were conducted in a greenhouse, with the application of three different herbicides (fluazifop-p-butyl, haloxyfop-methyl, and sethoxydim + mineral oil Assist). The experimental design used for each herbicide was completely randomized, with four replications, consisting of a 3 x 4 factorial, with the combination of water management strategies (-0.03, -0.07 and -1.5 MPa) and four doses of these products (100%, 50%, 25%, and 0% of the recommended dose). Herbicide application was made at two vegetative stages, 4-6 leaves and 2-3 tillers. The visual phytotoxicity evaluations were performed at 14 days after application and the plant dry weight at the end of the study was evaluated. The control efficiency was not affected by water management strategies when applied to the recommended dose of the herbicides in early stages of plant development (4-6 leaf stage). In late applications (2-3 tiller stage) the plants held under drought stress showed less phytotoxicity.

Evolver: The Evolution of The Extended EPrints Ecosystem

Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

Targeted measures bring the greatest benefits for environmental protection in agriculture final report of the TEHO Plus project (2011–2014)

Targeted measures bring the greatest benefits for environmental protection in agriculture final report of the TEHO Plus project (2011–2014). Particular priority areas of the project activities included creating a training package for agri-environment advisers and testing it, farm-specific advisory services and exploitation of experiences of advice provision, putting together an information package of agri-environment issues, farm-level experiments, and development of water quality monitoring. The recommendations issued by advisers on targeting environmental measures were based on utilising geographical information material and nutrient balances. The project was implemented in cooperation by Southwest Finland Centre for Economic Development, Transport and the Environment, MTK-Satakunta and MTK-Varsinais-Suomi. The project received funding from the Ministry of Agriculture and Forestry and the Ministry of the Environment. Participating farmers, with whom environmental advice was developed and experiments were carried out, were important partners for the project. The operating area of the project was Satakunta and Varsinais-Suomi in Southwest Finland, but its outcomes can be exploited nationally. A national perspective was ensured by close cooperation with actors in different provinces. This final report describes project experiences and outcomes including environmental advisory services, training of agri-environmental advisers, farm visits and the feedback received from farmers on agri-environmental advice, development of water quality monitoring, experiments and project work.

An examination of factors influencing ERP key-user satisfaction: A qualitative case study

Several companies are trying to improve their operation efficiency by implementing an enterprise resource planning (ERP) system that makes it possible to control the resources of the company in real time. However, the success of the implementation project is not a foregone conclusion; a significant part of these projects end in a failure, one way or another. Therefore it is important to investigate ERP system implementation more closely in order to increase understanding about factors influencing ERP system success and to improve the probability of a successful ERP implementation project. Consequently, this study was initiated because a manufacturing case company wanted to review the success of their ERP implementation project. To be exact, the case company hoped to gain both information about the success of the project and insight for future implementation improvement. This study investigated ERP success specifically by examining factors that influence ERP key-user satisfaction. User satisfaction is one of the most commonly applied indicators of information system success. The research data was mainly collected by conducting theme interviews. The subjects of the interviews were six key-users of the newly implemented ERP system. The interviewees were closely involved in the implementation project. Furthermore, they act as representative users that utilize the new system in everyday business processes. The collected data was analyzed by thematizing. Both data collection and analysis were guided by a theoretical frame of reference. This frame was based on previous research on the subject. The results of the study aligned with the theoretical framework to large extent. The four principal factors influencing key-user satisfaction were change management, contractor service, key-user’s system knowledge and characteristics of the ERP product itself. One of the most significant contributions of the research is that it confirmed the existence of a connection between change management and ERP key-user satisfaction. Furthermore, it discovered two new sub-factors influencing contractor service related key-user satisfaction. In addition, the research findings indicated that in order to improve the current level of key-user satisfaction, the case company should pay special attention to system functionality improvement and enhancement of the key-users’ knowledge. During similar implementation projects in the future, it would be important to assure the success of change management and contractor service related processes.

Development of project cash flow forecasting process

Process management refers to improving the key functions of a company. The main functions of the case company - project management, procurement, finance, and human resource - use their own separate systems. The case company is in the process of changing its software. Different functions will use the same system in the future. This software change causes changes in some of the company’s processes. Project cash flow forecasting process is one of the changing processes. Cash flow forecasting ensures the sufficiency of money and prepares for possible changes in the future. This will help to ensure the company’s viability. The purpose of the research is to describe a new project cash flow forecasting process. In addition, the aim is to analyze the impacts of the process change, with regard to the project control department’s workload and resources through the process measurement, and how the impacts take the department’s future operations into account. The research is based on process management. Processes, their descriptions, and the way the process management uses the information, are discussed in the theory part of this research. The theory part is based on literature and articles. Project cash flow and forecasting-related benefits are also discussed. After this, the project cash flow forecasting as-is and to-be processes are described by utilizing information, obtained from the theoretical part, as well as the know-how of the project control department’s personnel. Written descriptions and cross-functional flowcharts are used for descriptions. Process measurement is based on interviews with the personnel – mainly cost controllers and department managers. The process change and the integration of two processes will allow work time for other things, for example, analysis of costs. In addition to the quality of the cash flow information will improve compared to the as-is process. Analyzing the department’s other main processes, department’s roles, and their responsibilities should be checked and redesigned. This way, there will be an opportunity to achieve the best possible efficiency and cost savings.

Effect of skilled and unskilled training on nerve regeneration and functional recovery

The most disabling aspect of human peripheral nerve injuries, the majority of which affect the upper limbs, is the loss of skilled hand movements. Activity-induced morphological and electrophysiological remodeling of the neuromuscular junction has been shown to influence nerve repair and functional recovery. In the current study, we determined the effects of two different treatments on the functional and morphological recovery after median and ulnar nerve injury. Adult Wistar male rats weighing 280 to 330 g at the time of surgery (N = 8-10 animals/group) were submitted to nerve crush and 1 week later began a 3-week course of motor rehabilitation involving either "skilled" (reaching for small food pellets) or "unskilled" (walking on a motorized treadmill) training. During this period, functional recovery was monitored weekly using staircase and cylinder tests. Histological and morphometric nerve analyses were used to assess nerve regeneration at the end of treatment. The functional evaluation demonstrated benefits of both tasks, but found no difference between them (P > 0.05). The unskilled training, however, induced a greater degree of nerve regeneration as evidenced by histological measurement (P < 0.05). These data provide evidence that both of the forelimb training tasks used in this study can accelerate functional recovery following brachial plexus injury.

Grassroots Charity in China: Case Analysis of a Charity Project Organised by Jane Zhang Fan Club

As unregistered grassroots charities do not appear in official statistics in China, they tend to remain unnoticed by scholars. Also as they operate unofficially and avoid publicity, their work is usually not reported by the media. In this research I explore the grassroots charity activity of one pop music fan club from the viewpoint of trust as a sociological concept. I will also establish the general situation on charity in China. By using textual analysis on internet blogs and discussion forums I map the charity project from the discussion of the original idea to the execution and follow up phase. I study the roles the fan club members assume during the project as anonymous participants of internet conversations, as well as concrete active charity volunteers outside of the virtual world. I establish parties, other than the fan club, which are involved in the charity project. Interviews with one of the participant of the project in 2010, 2014 and 2015 bring valuable additional information and help in distributing the questionnaire survey. A quantitative questionnaire survey was distributed among the fan club members to get more detailed information on the motives and attitudes towards official and unofficial charity in China. Because of the inequality in China, the rural minority areas do not have similar educational opportunities as the mostly majority inhabited urban areas, even though the country officially has a nine year compulsory education. Grassroots charities can operate in relative freedom taking some of the government’s burden of social responsibilities if they are not criticizing the authorities. The problem with grassroots charity seems to be lack of sustainability. The lack of trust for authorities and official charities was the reason why the Jane Zhang fan club decided to conduct a charity case unofficially. As a group of people previously unknown to each other, they managed to build mutual trust to carry out the project transparently and successfully, though not sustainably. The internet has provided a new and effective platform for unofficial grassroots charities, who choose not to co-operate with official organisations. On grassroots level charities can have the transparency and trust that lack from official charities. I suggest, that interviewing the real persons behind the internet aliases and finding out what happened outside the discussion forums, would bring a more detailed and outspoken description of the project concerning of the contacts with the local authorities. Also travelling to the site and communicating with the local people in the village would establish how they have experienced the project.

GIS-based approach for optimization of onshore wind park infrastructure alignment in Finland

Wind power is a rapidly developing, low-emission form of energy production. In Fin-land, the official objective is to increase wind power capacity from the current 1 005 MW up to 3 500–4 000 MW by 2025. By the end of April 2015, the total capacity of all wind power project being planned in Finland had surpassed 11 000 MW. As the amount of projects in Finland is record high, an increasing amount of infrastructure is also being planned and constructed. Traditionally, these planning operations are conducted using manual and labor-intensive work methods that are prone to subjectivity. This study introduces a GIS-based methodology for determining optimal paths to sup-port the planning of onshore wind park infrastructure alignment in Nordanå-Lövböle wind park located on the island of Kemiönsaari in Southwest Finland. The presented methodology utilizes a least-cost path (LCP) algorithm for searching of optimal paths within a high resolution real-world terrain dataset derived from airborne lidar scannings. In addition, planning data is used to provide a realistic planning framework for the anal-ysis. In order to produce realistic results, the physiographic and planning datasets are standardized and weighted according to qualitative suitability assessments by utilizing methods and practices offered by multi-criteria evaluation (MCE). The results are pre-sented as scenarios to correspond various different planning objectives. Finally, the methodology is documented by using tools of Business Process Management (BPM). The results show that the presented methodology can be effectively used to search and identify extensive, 20 to 35 kilometers long networks of paths that correspond to certain optimization objectives in the study area. The utilization of high-resolution terrain data produces a more objective and more detailed path alignment plan. This study demon-strates that the presented methodology can be practically applied to support a wind power infrastructure alignment planning process. The six-phase structure of the method-ology allows straightforward incorporation of different optimization objectives. The methodology responds well to combining quantitative and qualitative data. Additional-ly, the careful documentation presents an example of how the methodology can be eval-uated and developed as a business process. This thesis also shows that more emphasis on the research of algorithm-based, more objective methods for the planning of infrastruc-ture alignment is desirable, as technological development has only recently started to realize the potential of these computational methods.

Research in the clinical setting : a qualitative study of the value of play research in the continuing education of occupational therapists.

Occupational therapists have always recognized playas an important part of a child's life. However, until recently play has been viewed as a medium for reaching treatment goals, rather than as an activity that is valuable in and of itself. If occupational therapists think of playas the primary activity or occupation of childhood, then play should be a very important area of focus for paediatric clinicians. In order to assist children to become as independent as possible with play and to have fulfilling play experiences the occupational therapist needs to have a clear understanding of how to assess, set goals which lead towards competence in play, and promote play. Recent play literature has placed importance on play behaviours and looking at the relationship between the child and both the human and nonhuman environment. Believing that play and playfulness can and should be promoted, for children with physical disabilities, requires that therapists learn new assessment and intervention strategies. A new assessment tool, The Test of Playfulness, was developed by Bundy in 1994. It addressed play behaviours and environmental influences. The author, a co-investigator and eight occupational therapists were involved in a playfulness study using this test to compare the playfulness of children with physical disabilities with their able-bodied peers. After the study was completed the author questioned whether or not involvement in the playfulness study was enough of a change agent to bring about transformative learning in order to further the eight occupational therapists' education about play.This study investigated changes in either the therapists' thinking about play or their behaviour in their clinical practice. The study also examined the participants' retention of knowledge about the Test of Playfulness. The eight therapists who had been involved in the playfulness study (participants) were matched with eight therapists who had not been involved (nonparticipants). The therapists were interviewed 9 to 12 months after completion of the playfulness study. They were asked to describe various scenarios of play and open ended prompts were used to elicit the therapists' perceptions of play, good play, the role or value of play, environmental and gender influences on play, play assessment and intervention, and play research, for children with and without disabilities. The participants were also prompted to discuss their experience with the playfulness study. A self-report questionnaire was also completed at the end of the interview. The results of the study demonstrated that: (a) the play research project was a good format for continuing the participants' education about play; (b) their thinking had changed about play; (c) according to self report, they had used this new knowledge in their clinical practice; and (d) the participants remembered the items on the Test of Playfulness and could use them in describing various aspects of play. This study found that participating in a play research project had been an effective method of professional development. It also highlighted the need for increased awareness of the recent literature on play and the developing role of the occupational therapist in the assessment and intervention of play.