Nanocomposites as probes for biodetection by SERS

The present work aimed to explore the potential of new nanocomposites based on carbon nanostructures and metal nanoparticles for the detection of biomolecules through surface enhanced Raman scattering (SERS). In a first step, polyvinyl alcohol composites were prepared incorporating silver nanoparticles by two different reduction procedures. At first without introduction of carbon nanostructures. These composites showed good results for the SERS identification of nucleic acids. Next, the synthesis and characterization of graphene oxide was studied to be used in the preparation of silver and gold nanocomposites. The reduction of this nanomaterial with different chemical agents was explored, since its reduction degree may be a determinant factor for the application envisaged (biomolecules interaction). The preparation of the nanocomposites with silver and gold was performed with different reducing agents. The SERS activity of these new nanocomposites was then explored in the presence of different analytes, varying the experimental conditions for Raman spectra acquisition. It was interesting to verify that the silver containing nanocomposites presented the particularity to intensify the graphene D and G bands. It is also important to highlight that a new eco-friendly reducing agent was tested for the synthesis of the graphene oxide composites, an Eucalyptus Globulus extract. Other variable introduced was the preparation of gold nanostars synthesized with hydroxylamine in the presence of graphene oxide, which allowed the preparation of a new nanocomposite with SERS potential. Fibrous membranes were also prepared by electrospinning with the aim to prepare SERS supports with adequate topography and porosity for the formation of nanoparticles agglomerates for the creation of the so-called hot-spots and also to allow the penetration of the analyte molecules. The polymers polyvinyl alcohol and polyacrylonitrile were selected for electrospinning. Using this technique, electrospun mantles with silver and gold nanoparticles and nanocomposites were prepared. Several variables were studied, such as the introduction of the nano-fillers during the electrospinning process, later deposition of the nano-fillers on the simple electrospun polymeric fibres and surface functionalization of the simple polymeric membranes to link the nano-fillers. At last, the potentialities of using carbon nanotubes forests, produced by chemical vapor deposition and coated with gold film by sputtering, as new SERS substrates were explored. It was found that the SERS detection of DNA bases and ADN itself is possible using these substrates.

Design normal: memória e invisibilidade dos objectos

As últimas décadas têm sido caracterizadas por uma crescente indefinição do design, que refletindo um dia-a-dia cada vez mais complexo, não pode mais ser encarado como actividade fechada no projecto e acabada no produto. O seu universo aumentou e dispersou-se em mercados menores, alargando o seu alcance e sua importância, transformando-o em termo quantitativo e inflacionário. A crescente atenção de que é alvo dramatizou a sua relação com o consumo, o ruído nas prateleiras e a superficialidade da generalização de uma perspectiva do projecto focada nos new media, validando uma abordagem narcisista e de dispensa do diálogo com a indústria, tornaram-no sinónimo de especial. Este trabalho procura confirmar e refletir sobre a existência de um universo de produtos concretos e abordagens que de forma consciente partilham esta noção do contexto actual, em primeiro lugar, sugerindo caminhos alternativos e reacções resultantes da prática e discurso. Em segundo lugar procura analisar se tal reacção pode ser considerada como um movimento. Partindo de uma revisão bibliográfica, e de uma reflexão sobre um universo de produtos do dia-a-dia, procura-se, em terceiro lugar, interpretar e organizar as diversas formas e estratégias de rejeição da noção de design especial. Da procura de abordagens opostas a especial resulta uma ideia base de normal, normal sem ser banal, expressa na exposição Super Normal. Da extensão a um universo maior de produtos, reacções e autores, resulta a ideia de normal como um conceito mais abrangente, mas composto por conceitos menores, mais específicos, mais concretos e fáceis de identificar nos objectos. A organização e interpretação dessas abordagens resulta num triângulo de conceitos que constroem a noção de normal pela procura da evolução por recurso à memória e ao conhecimento, da invisibilidade pela integração e diluição do produto e projecto, e da liberdade como meio de adequação ao contexto actual. O livro resultante reflete uma abordagem definida de uma época, e não todo o panorama. A sistematização do conceito de normal a partir da segmentação em ideias menores, mais concretas e identificáveis nos produtos, procura proporcionar a consulta organizada de reacções ao contexto dominante actual, à ideia de especial, mas mais do que regras, procura fornecer um documento de reflexão a visitar no acto de projectar, seja como um todo, ou em partes.

Understanding and modelling hydrological and soil erosion processes in burnt forest catchments

Forest fires implications in overland flow and soil erosion have been researched for several years. Therefore, is widely known that fires enhance hydrological and geomorphological activity worldwide as also in Mediterranean areas. Soil burn severity has been widely used to describe the impacts of fire on soils, and has being recognized as a decisive factor controlling post-fire erosion rates. However, there is no unique definition of the term and the relationship between soil burn severity and post-fire hydrological and erosion response has not yet been fully established. Few studies have assessed post-fire erosion over multiple years, and the authors are aware of none which assess runoff. Small amount of studies concerning pre-fire management practices were also found. In the case of soil erosion models, the Revised Universal Soil Loss Equation (RUSLE) and the revised Morgan–Morgan–Finney (MMF) are well-known models, but not much information is available as regards their suitability in predicting post-fire soil erosion in forest soils. The lack of information is even more pronounced as regards post-fire rehabilitation treatments. The aim of the thesis was to perform an extensive research under the post fire hydrologic and erosive response subject. By understanding the effect of burn severity in ecosystems and its implications regarding post fire hydrological and erosive responses worldwide. Test the effect of different pre-fire land management practices (unplowed, downslope plowed and contour plowed) and time-since-fire, in the post fire hydrological and erosive response, between the two most common land uses in Portugal (pine and eucalypt). Assess the performance of two widely-known erosion models (RUSLE and Revised MMF), to predict soil erosion rates during first year following two wildfires of distinctive burn severity. Furthermore, to apply these two models considering different post-fire rehabilitation treatments in an area severely affected by fire. Improve model estimations of post-fire runoff and erosion rates in two different land uses (pine and eucalypt) using the revised MMF. To assess these improvements by comparing estimations and measurements of runoff and erosion, in two recently burned sites, as also with their post fire rehabilitation treatments. Model modifications involved: (1) focusing on intra-annual changes in parameters to incorporate seasonal differences in runoff and erosion; and (2) inclusion of soil water repellency in runoff predictions. Additionally, validate these improvements with the application of the model to other pine and eucalypt sites in Central Portugal. The review and meta-analysis showed that fire occurrence had a significant effect on the hydrological and erosive response. However, this effect was only significantly higher with increasing soil burn severity for inter-rill erosion, and not for runoff. This study furthermore highlighted the incoherencies between existing burn severity classifications, and proposed an unambiguous classification. In the case of the erosion plots with natural rainfall, land use factor affected annual runoff while land management affected both annual runoff and erosion amounts significantly. Time-since-fire had an important effect in erosion amounts among unplowed sites, while for eucalypt sites time affected both annual runoff and erosion amounts. At all studied sites runoff coefficients increase over the four years of monitoring. In the other hand, sediment concentration in the runoff, recorded a decrease during the same period. Reasons for divergence from the classic post-fire recovery model were also explored. Short fire recurrence intervals and forest management practices are viewed as the main reasons for the observed severe and continuing soil degradation. The revised MMF model presented reasonable accuracy in the predictions while the RUSLE clearly overestimated the observed erosion rates. After improvements: the revised model was able to predict first-year post-fire plot-scale runoff and erosion rates for both forest types, these predictions were improved both by the seasonal changes in the model parameters; and by considering the effect of soil water repellency on the runoff, individual seasonal predictions were considered accurate, and the inclusion of the soil water repellency in the model also improved the model at this base. The revised MMF model proved capable of providing a simple set of criteria for management decisions about runoff and erosion mitigation measures in burned areas. The erosion predictions at the validation sites attested both to the robustness of the model and of the calibration parameters, suggesting a potential wider application.

Surface reactivity enhancement of silica-based glass-ceramic scaffolds

A paradigm shift is taking place from using transplanting tissue and synthetic implants to a tissue engineering approach that aims to regenerate damaged tissues by combining cells from the body with highly porous scaffold biomaterials, which act as templates, guiding the growth of new tissue. The central focus of this thesis was to produce porous glass and glass-ceramic scaffolds that exhibits a bioactive and biocompatible behaviour with specific surface reactivity in synthetic physiological fluids and cell-scaffold interactions, enhanced by composition and thermal treatments applied. Understanding the sintering behaviour and the interaction between the densification and crystallization processes of glass powders was essential for assessing the ideal sintering conditions for obtaining a glass scaffolds for tissue engineering applications. Our main goal was to carry out a comprehensive study of the bioactive glass sintering, identifying the powder size and sintering variables effect, for future design of sintered glass scaffolds with competent microstructures. The developed scaffolds prepared by the salt sintering method using a 3CaO.P2O5 - SiO2 - MgO glass system, with additions of Na2O with a salt, NaCl, exhibit high porosity, interconnectivity, pore size distribution and mechanical strength suitable for bone repair applications. The replacement of 6 % MgO by Na2O in the glass network allowed to tailor the dissolution rate and bioactivity of the glass scaffolds. Regarding the biological assessment, the incorporation of sodium to the composition resulted in an inibition cell response for small periods. Nevertheless it was demonstrated that for 21 days the cells response recovered and are similar for both glass compositions. The in vitro behaviour of the glass scaffolds was tested by introducing scaffolds to simulated body fluid for 21 days. Energy-dispersive Xray spectroscopy and SEM analyses proved the existence of CaP crystals for both compositions. Crystallization forming whitlockite was observed to affect the dissolution behaviour in simulated body fluid. By performing different heat treatments, it was possible to control the bioactivity and biocompatability of the glass scaffolds by means of a controlled crystallization. To recover and tune the bioactivity of the glass-ceramic with 82 % crystalline phase, different methods have been applied including functionalization using 3- aminopropyl-triethoxysilane (APTES). The glass ceramic modified surface exhibited an accelerated crystalline hydroxyapatite layer formation upon immersion in SBF after 21 days while the as prepared glass-ceramic had no detected formation of calcium phosphate up to 5 months. A sufficient mechanical support for bone tissue regeneration that biodegrade later at a tailorable rate was achievable with the glass–ceramic scaffold. Considering the biological assessment, scaffolds demonstrated an inductive effect on the proliferation of cells. The cells showed a normal morphology and high growth rate when compared to standard culture plates. This study opens up new possibilities for using 3CaO.P2O5–SiO2–MgO glass to manufacture various structures, while tailoring their bioactivity by controlling the content of the crystalline phase. Additionally, the in vitro behaviour of these structures suggests the high potential of these materials to be used in the field of tissue regeneration.

Diamond microelectrodes for corrosion studies

Este trabalho teve como objetivos a produção, caracterização e aplicação de microelétrodos (MEs) de diamante como sensores amperométricos e potenciométricos em sistemas de corrosão nos quais a agressividade do meio e a presença de produtos de corrosão, constituem obstáculos que podem diminuir o desempenho, ou inviabilizar a utilização, de outros tipos de sensores. Os microeléctrodos são baseados em filmes finos de diamante dopado com boro (BDD – Boron Doped Diamond) depositados sobre fios de tungsténio afiados, através do método de deposição química a partir da fase vapor, assistida por filamento quente (HFCVD – Hot Filament Chemical Vapor Deposition). A otimização das diversas etapas de fabricação dos MEs deu origem ao desenvolvimento de um novo sistema de afiamento eletroquímico para obtenção destes fios e a várias opções para a obtenção dos filmes de diamante condutor e seu isolamento com resinas para exposição apenas da ponta cilíndrica. A qualidade cristalina dos filmes de diamante foi avaliada por espectroscopia de Raman. Esta informação foi complementada com uma caracterização microestrutural dos filmes de diamante por microscopia eletrónica de varrimento (SEM), em que se fez a identificação da tipologia dos cristais como pertencendo às gamas de diamante nanocristalino ou microcristalino. Os filmes de BDD foram utilizados na sua forma não modificada, com terminações em hidrogénio e também com modificação da superfície através de tratamentos de plasma RF de CF4 e O2 indutores de terminações C-F no primeiro caso e de grupos C=O, C-O-C e C-OH no segundo, tal como determinado por XPS. A caracterização eletroquímica dos MEs não modificados revelou uma resposta voltamétrica com elevada razão sinal/ruído e baixa corrente capacitiva, numa gama de polarização quasi-ideal com extensão de 3 V a 4 V, dependente dos parâmetros de crescimento e pós-tratamentos de superfície. Estudou-se a reversibilidade de algumas reações heterogéneas com os pares redox Fe(CN)6 3-/4- e FcOH0/+ e verificou-se que a constante cinética, k0, é mais elevada em elétrodos com terminações em hidrogénio, nos quais não se procedeu a qualquer modificação da superfície. Estes MEs não modificados foram também testados na deteção de Zn2+ onde se observou, por voltametria cíclica, que a detecção da redução deste ião é linear numa escala log-log na gama de 10-5-10-2 M em 5 mM NaCl. Realizaram-se também estudos em sistemas de corrosão modelares, em que os microeléctrodos foram usados como sensores amperométricos para mapear a distribuição de oxigénio e Zn2+ sobre um par galvânico Zn-Fe, com recurso a um sistema SVET (Scanning Vibrating Electrode Technique). Foi possível detetar, com resolução lateral de 100 μm, um decréscimo da concentração de O2 junto a ambos os metais e produção de catiões de zinco no ânodo. Contudo verificou-se uma significativa deposição de zinco metálico na superfície dos ME utilizados. Os MEs com superfície modificada por plasma de CF4 foram testados como sensores de oxigénio dissolvido. A calibração dos microeléctrodos foi efetuada simultaneamente por voltametria cíclica e medição óptica através de um sensor de oxigénio comercial. Determinou-se uma sensibilidade de ~0.1422 nA/μM, com um limite de deteção de 0.63 μM. Os MEs modificados com CF4 foram também testados como sensores amperométricos com os quais se observou sensibilidade ao oxigénio dissolvido em solução, tendo sido igualmente utilizados durante a corrosão galvânica de pares Zn-Fe. Em alguns casos foi conseguida sensibilidade ao ião Zn2+ sem que o efeito da contaminação superficial com zinco metálico se fizesse sentir. Os microeléctrodos tratados em plasma de CF4 permitem uma boa deteção da distribuição de oxigénio, exibindo uma resposta mais rápida que os não tratados além de maior estabilidade de medição e durabilidade. Nos MEs em que a superfície foi modificada com plasma de O2 foi possível detetar, por cronopotenciometria a corrente nula, uma sensibilidade ao pH de ~51 mV/pH numa gama de pH 2 a pH 12. Este comportamento foi associado à contribuição determinante de grupos C-O e C=O, observados por XPS com uma razão O/C de 0,16. Estes MEs foram igualmente testados durante a corrosão galvânica do par Zn-Fe onde foi possível mapear a distribuição de pH associada ao desenvolvimento de regiões alcalinas causadas pela redução do oxigénio, acima da região catódica, e de regiões ácidas decorrentes da dissolução anódica do ânodo de zinco. Com o par galvânico imerso em 50 mM NaCl registou-se uma variação de pH aproximadamente entre 4,8 acima do ânodo de zinco a 9,3 sobre o cátodo de ferro. A utilização pioneira destes MEs como sensores de pH é uma alternativa promissora aos elétrodos baseados em membranas seletivas.

Resistance to last-resort antibiotics in natural environments

Last-resort antibiotics are the final line of action for treating serious infections caused by multiresistant strains. Over the years the prevalence of resistant bacteria has been increasing. Natural environments are reservoirs of antibiotic resistance, highly influenced by human-driven activities. The importance of aquatic systems on the evolution of antibiotic resistance is highlighted from the assumption that clinically-relevant resistance genes have originated in strains ubiquitous in these environments. We hypothesize that: a) rivers are reservoirs and disseminators of antibiotic resistance; b) anthropogenic activities potentiate dissemination of resistance to last-resort antibiotics. Hence, the main goal of the work is to compare the last-resort antibiotics resistome, in polluted and unpolluted water. Rivers from the Vouga basin, exposed to different anthropogenic impacts, were sampled. Water quality parameters were determined to classify rivers as unpolluted or polluted. Two bacterial collections were established enclosing bacteria resistant to cefotaxime (3rd generation cephalosporin) and to imipenem (carbapenem). Each collection was characterized regarding: phylogenetic diversity, antibiotic susceptibility, resistance mechanisms and mobile genetic elements. The prevalence of cefotaxime- and imipenem-resistant bacteria was higher in polluted water. Results suggested an important role in the dissemination of antibiotic resistance for Enterobacteriaceae, Pseudomonas and Aeromonas. The occurrence of bacteria resistant to non-beta-lactams was higher among isolates from polluted water as also the number of multiresistant strains. Among strains resistant to cefotaxime, extended-spectrum beta-lactamase (ESBL) genes were detected (predominantly blaCTX-M-like) associated to mobile genetic elements previously described in clinical strains. ESBL-producers were often multiresistant as a result of co-selection mechanisms. Culture-independent methods showed clear differences between blaCTX-M-like sequences found in unpolluted water (similar to ancestral genes) and polluted water (sequences identical to those reported in clinical settings). Carbapenem resistance was mostly related to the presence of intrinsically resistant bacteria. Yet, relevant carbapenemase genes were detected as blaOXA-48-like in Shewanella spp. (the putative origin of these genes), and blaVIM-2 in Pseudomonas spp. isolated from polluted rivers. Culture-independent methods showed an higher than the previously reported diversity of blaOXA-48-like genes in rivers. Overall, clear differences between polluted and unpolluted systems were observed, regarding prevalence, phylogenetic diversity and susceptibility profiles of resistant bacteria and occurrence of clinically relevant antibiotic resistance genes, thus validating our hypotheses. In this way, rivers act as disseminators of resistance genes, and anthropogenic activities potentiate horizontal gene transfer and promote the constitution of genetic platforms that combine several resistance determinants, leading to multiresistance phenotypes that may persist even in the absence of antibiotics.

Ecological and biotechnological potential of sponge microbiome

Marine sponges harbor microbial communities of immense ecological and biotechnological importance. Recently, they have been focus of heightened attention due to the wide range of biologically active compounds with potential application, particularly, in chemical, cosmetic and pharmaceutical industries. However, we still lack fundamental knowledge of their microbial ecology and biotechnological potential. The development of high-throughput sequencing technologies has given rise to a new range of tools that can help us explore the biotechnological potential of sponges with incredible detail. Metagenomics, in particular, has the power to revolutionize the production of bioactive compounds produced by unculturable microorganisms. It can offer the identification of biosynthetic genes or gene clusters that can be heterologously expressed on a cultivable and suitable host. This review focus on the exploration of the biotechnological potential of sponge-associated microorganisms, and integration of molecular approaches, whose increasing efficiency can play an essential role on achieving a sustainable source of natural products.

Post-synthetic modification of metal–organic frameworks

Post-synthetic modification (PSM) of metal-organic frameworks encompassing the chemical transformation of the linker present is a promising new route for engineering optical centres and tuning the light emission properties of materials, both in the visible and in the near infrared (NIR) spectral regions. Here, PSM of isoreticular metal-organic framework-3 (IRMOF-3) with ethyl oxalyl monochloride, ethyl acetoacetate, pentane-2,4-dione, 3-(2- hydroxyphenyl)-3-oxopropanal, 2-chloroacetic acid, glyoxylic acid, methyl vinyl ketone and diethyl (ethoxymethylene)malonate followed by chelation of trivalent lanthanide ions afforded intriguing near infrared (Nd3+) and visible (Eu3+, Tb3+) light emitters. IRMOF-3 was used as a case in point due to both its highly porous crystalline structure and the presence of non-coordinating amino groups on the benzenedicarboxylate (bdc) linker amenable to modification. The materials were characterised by elemental analysis, powder X-ray diffraction, optical, scanning and transmission electron microscopy, Fourier transform infrared spectroscopy, and liquid and solid-state nuclear magnetic resonance. The solid-state luminescence properties of Ln-modified-IRMOF-3 were investigated at room temperature. The presence of the bdc aromatic ring, β– diketonate and oxalate enhanced the Ln3+ sensitization via ligand-to-metal energy transfer (anthena effect). As far as photocalysis is concerned, we have synthesized metal−organic frameworks (Cr-MIL-125-AC, Ag-MIL-125-AC) by a green method (solid–vapors reactions). The resulting functionalized materials show a photocatalytic activity for methylene blue degradation up to 6.52 times larger than that of the commercial photocatalyst hombikat UV-100. These findings open the door for further research for improving the photocatalytic performance of metal-organic frameworks.

Avaliação da resposta sísmica de edifícios sitos em solos brandos estratificados

O Eurocódigo 8 exige um estudo mais aprofundado da resposta dinâmica de solos brandos classificados como tipo S1, tendo em vista o dimensionamento de edifícios. Neste trabalho apresenta-se uma metodologia visando a avaliação da segurança, ou o dimensionamento, de edifícios construídos sobre solos brandos estratificados. A metodologia proposta baseia-se nas velocidades das ondas de corte VS, obtidas de estudos geofísicos/geotécnicos, realizados in situ, tal como é proposto na parte 5 do EC8. A amplificação dinâmica das vibrações, em resultado dos contrastes das impedâncias dos diversos estratos, é obtida admitindo a propagação unidimensional das ondas sísmicas VS, na vertical, a partir do substrato rochoso. A resposta superficial é quantificada com base na análise não linear da coluna de solo sobre o substrato rochoso. A acção sísmica é caracterizada com base em vários acelerogramas “strong motion”, registados noutros países, em afloramentos rochosos, multiplicados por um factor de escala. Os factores de escala são obtidos de modo a que o espectro de resposta médio se ajuste ao espectro objectivo do EC8 (solo tipo A). A análise sísmica da estrutura do edifício é realizada com o espectro de resposta médio, que é obtido tendo em conta as funções de transferência determinadas para o terreno em estudo. Aplica-se a metodologia proposta a um caso de estudo no Algarve.

Modelação hidrodinâmica de escoamentos costeiros

As zonas costeiras, os estuários e os sistemas lagunares são regiões de elevada importância do ponto de vista económico devido à intensa actividade nelas desenvolvida. Encontram-se por esse motivo sujeitas a fortes pressões do tipo ambiental. A correcta gestão dos seus recursos deve ser apoiada em ferramentas que possibilitem uma análise precisa dos fenómenos que nelas ocorrem e permitam a previsão da evolução desses sistemas. A recente evolução na capacidade de cálculo dos computadores de pequeno porte tornou viável a utilização de modelos hidrodinâmicos como ferramentas de apoio à decisão.

Estágios curriculares do bacharelato em Engenharia Mecânica

Os planos curriculares da globalidade dos cursos de Bacharelato ministrados na Escola Superior de Tecnologia (EST) contêm uma disciplina designada por Estágio, de carácter obrigatório, a qual se desenvolve, em geral, no período compreendido entre o final do 2º semestre e o início do 1º semestre do ano lectivo seguinte. O seu objectivo primordial é o de permitir a integração dos alunos em situações de actividade profissional concretas, num ambiente real e externo à Escola, como complemento da sua formação académica.

Novas fontes de antioxidantes e inibidores de enzimas relevantes para o tratamento da diabetes mellitus tipo 2 e doença de Alzheimer

Dissertação de mest., Engenharia Biológica, Faculdade de Ciências e Tecnologia, Universidade do Algarve, 2009

Uma abordagem de matabolómica no estudo comparativo do metabolismo de glucose e galactose no patogénico humano Streptococcus pneumoniae

Dissertação mest., Ciências Biomédicas, Universidade do Algarve, 2010

Estudo da recuperação da deficiência de ferro em plantas de morangueiro (Fragaria x ananassa Duch.) numa perspectiva sustentável

Consulta interdita até nova indicação

Compreensão e interpretação em matemática: dificuldades de alunos do 9º ano na resolução de problemas

Dissertação mest., Matemática, Universidade do Algarve, 2009