Integration of miRNA and mRNA expression with DNA copy number of Ewing sarcoma cell lines

Ewing sarcoma is an aggressive and poorly differentiated malignancy of bone and soft tissue. It primarily affects children, adolescents, and young adults, with a slight male predominance. It is characterized by a translocation between chromosomes 11 and 22 resulting in the EWSR1-FLI1fusion transcription factor. The aim of this study is to identify putative Ewing sarcoma target genes through an integrative analysis of three microarray data sets. Array comparative genomic hybridization is used to measure changes in DNA copy number, and analyzed to detect common chromosomal aberrations. mRNA and miRNA microarrays are used to measure expression of protein-coding and miRNA genes, and these results integrated with the copy number data. Chromosomal aberrations typically contain also bystanders in addition to the driving tumor suppressor and oncogenes, and integration with expression helps to identify the true targets. Correlation between expression of miRNAs and their predicted target mRNAs is also evaluated to assess the results of post-transcriptional miRNA regulation on mRNA levels. The highest frequencies of copy number gains were identified in chromosome 8, 1q, and X. Losses were most frequent in 9p21.3, which also showed an enrichment of copy number breakpoints relative to the rest of the genome. Copy number losses in 9p21.3 were found have a statistically significant effect on the expression of MTAP, but not on CDKN2A, which is a known tumor-suppressor in the same locus. MTAP was also down-regulated in the Ewing sarcoma cell lines compared to mesenchymal stem cells. Genes exhibiting elevated expression in association with copy number gains and up-regulation compared to the reference samples included DCAF7, ENO2, MTCP1, andSTK40. Differentially expressed miRNAs were detected by comparing Ewing sarcoma cell lines against mesenchymal stem cells. 21 up-regulated and 32 down-regulated miRNAs were identified, includingmiR-145, which has been previously linked to Ewing sarcoma. The EWSR1-FLI1 fusion gene represses miR-145, which in turn targets FLI1 forming a mutually repressive feedback loop. In addition higher expression linked to copy number gains and compared to mesenchymal stem cells, STK40 was also found to be a target of four different miRNAs that were all down-regulated in Ewing sarcoma cell lines compared to the reference samples. SLCO5A1 was identified as the only up-regulated gene within a frequently gained region in chromosome 8. This region was gained in over 90 % of the cell lines, and also with a higher frequency than the neighboring regions. In addition, SLCO5A1 was found to be a target of three miRNAs that were down-regulated compared to the mesenchymal stem cells.

High-resolution methyl edited GFT NMR experiments for protein resonance assignments and structure determination

Three-dimensional (3D) structure determination of proteins is benefitted by long-range distance constraints comprising the methyl groups, which constitute the hydrophobic core of proteins. However, in methyl groups (of Ala, Ile, Leu, Met, Thr and Val) there is a significant overlap of C-13 and H-1 chemical shifts. Such overlap can be resolved using the recently proposed (3,2)D HCCH-COSY, a G-matrix Fourier transform (GFT) NMR based experiment, which facilitates editing of methyl groups into distinct spectral regions by combining their C-13 chemical shifts with that of the neighboring, directly attached, C-13 nucleus. Using this principle, we present three GFT experiments: (a) (4,3)D NOESY-HCCH, (b) (4,3)D H-1-TOCSY-HCCH and (c) (4,3)D C-13-TOCSY-HCCH. These experiments provide unique 4D spectral information rapidly with high sensitivity and resolution for side-chain resonance assignments and NOE analysis of methyl groups. This is exemplified by (4,3)D NOESY-HCCH data acquired for 17.9 kDa non-deuterated cytosolic human J-protein co-chaperone, which provided crucial long-range distance constraints for its 3D structure determination.

Treatment of illicit opioid and γ-hydroxybutyrate overdose by Helsinki emergency medical services

Aims: To examine the characteristics, incidence, treatment and outcome of presumed opioid, γ-hydroxybutyrate (GHB) and γ-butyrolactone (GBL) overdoses involving users of illicit drugs in Helsinki. GHB/GBL were included in this study, despite not being opioids, due to the relative ease with which they can cause potentially fatal respiratory depression. The incidence and time interval of recurrent opioid toxicity after prehospital administration of naloxone, an opioid antagonist, was studied in presumed heroin overdose patients. Naloxone has been reported to have many adverse effects and the effects of naloxone administered during an opioid overdose on the cardiovascular system and catecholamine levels in piglets were studied. Materials and methods: Patients included in these published retrospective studies were from the following time periods: Study I: 1995-2002, II: 1997-2000, III: 1995-2000, V: 2006-2007. Presumed opioid overdose patients were examined in studies I, II and III. GHB/GBL overdoses among injecting drug users was examined in study V. Recurrent opioid toxicity after prehospital naloxone administration in heroin overdose patients was examined in study III. The effects of naloxone (80 μg/kg i.v.) on the cardiovascular system and catecholamine levels administered during morphine overdose (8mg/kg i.v.) and under propofol anesthesia with spontaneous breathing were studied in eight piglets (IV). In this thesis, previously unpublished data on the incidence of opioid overdose between 2001-2007 and comparison of the characteristics of buprenorphine and heroin overdose patients encountered in 1995-2005 are also included. Results: Helsinki Emergency Medical Service (EMS) ambulances were dispatched annually to 34,153- 45,118 calls from 1995 to 2007. Of them, 7-8% were coded as intoxications or overdoses. During this time, 436 patients were treated by the EMS for presumed opioid overdose. The peak incidence of opioid overdoses was in the year 2000 (113 cases), after which they declined to 6-26 cases annually. The annual incidence of buprenorphine related overdoses increased from 4 (4% of opioid overdoses) in the year 2000 to 8 (30% of opioid overdoses) in 2007. The annual number of GHB related overdose patients treated by Helsinki EMS increased from 21 to 73 between 2004-2007. There appeared to be a peak in the incidence of both GHB/GBL and opioid related overdoses on Saturdays. Characteristics of opioid overdose patients The median age of opioid overdose patients was 28 years (22;33, 25- and 75-percentiles), and 84% were male. Buprenorphine overdose patients had more polydrug, such as alcohol and/or benzodiazepines, use in comparison with heroin overdose patients, 70% versus 33%, respectively. Severe respiratory depression was reported less often with buprenorphine overdoses compared to heroin overdoses, in 67.0% versus 85.4%, respectively. Outcome of heroin overdose patients with cardiac arrest Ninety four patients suffered cardiac arrest due to acute drug poisoning/overdose and were thus considered for resuscitation. Resuscitation was attempted in 72 cases. Cardiac arrest was caused by heroin overdose for 19 patients of which three (16%) were discharged alive. Other agents also induced cardiac arrest in 53 patients, of which six (11%) were discharged alive. The arrest was either EMS witnessed or occurring after the emergency call for all survivors of heroin induced cardiac arrest. Characteristics of GHB/GBL overdose patients The records of 100 GHB/GBL related overdose patients from 2006-2007 were retrieved. The median age of GHB/GBL overdose patients encountered on weekend nights was 24 years (22;27, 25- and 75-percentiles) and 49% were male. Polydrug use was reported in 62-80% of the cases. Thirty nine patients were encountered on Friday-Saturday or Saturday-Sunday night between 11 pm-6 am. The remaining sixty one patients were outside this time frame. There was a statistically significant difference between these two groups in history of chronic injecting drug use (33% vs. 59%, respectively, p=0.012). Recurrent heroin toxicity after prehospital naloxone administration Study III included 145 presumed heroin overdose patients. After prehospital care, 84 patients refused further care and were not transported to an Emergency Department (ED). Seventy one (85%) of them were administered naloxone by the EMS. During a 12-h follow up period, none of these patients developed severe recurrent opioid toxicity. The remaining 61 patients were transported to an ED. Prior to transportation, 52 (85%) patients were administered naloxone by the EMS. Fifteen of them were administered naloxone also in the ED and recurrent opioid toxicity was evident either on arrival at the ED or shortly thereafter. Prehospital naloxone was administered either intravenously, intramuscularly (i.m.) or subcutaneously (s.c.). There was a tendency for more frequent recurrent heroin toxicity among the patients with only intravenous administration of prehospital naloxone (13/36) compared with the patients with intramuscular or subcutaneous prehospital naloxone (2/16), p=0.106. The effects of naloxone on the cardiovascular system and catecholamine levels in piglets The administration of morphine to piglets resulted in an obvious respiratory depression, which was reversed by naloxone. Two severely hypoxemic piglets developed cardiac arrest after naloxone administration. In the other six animals, the administration of naloxone did not provoke arrhythmias, cardiac ischemia or visible evidence of pulmonary edema. There was a statistically significant (p=0.012) increase in norepinephrine levels after morphine administration and before naloxone administration: from 1.9 (1.3-2.3) ng/ml at baseline, to 31.7 (8.3-83.0) ng/ml (median, 25 and 75 percentiles parentheses) after morphine administration. After the administration of naloxone, the catecholamine levels continued to increase in only one of the animals. Conclusions: The incidence of buprenorphine related overdoses increased during the study period, but was still lower in comparison to those involving heroin. Injecting drug users have also started to use GHB/GBL. While recreational drug users use GHB/GBL during weekend nights, a GHB/GBL overdose patient encounter during weekdays has a more probable history of injecting drug use. Patients with cardiac arrest after heroin overdose have a poor prognosis. It appears to be safe to leave heroin overdose patients on scene after prehospital treatment with naloxone. Although no statistically significant difference was observed, it seems prudent to administer part of the total naloxone dose s.c. or i.m. to reduce the risk of recurrent respiratory depression. If transported to an ED, an observation period of one to two hours after the last naloxone dose seems adequate. The treating physician must be vigilant, however, due to the high prevalence of polydrug use and high morbidity after non fatal heroin overdose. Furthermore, care should be taken regarding possible chronic disorders and drug rehabilitation should be addressed. In the experimental animal study, two animals developed cardiac arrest after receiving naloxone while in hypoxemia and bradycardia. Further studies are required to assess the effect of naloxone during opioid-induced hypercapnia and hypoxemia in animals addicted to opioids.

Acid-Catalyzed Thermal Rearrangement of Gamm,Delta-Unsaturated Ketones

Thermal activation of gamma,delta-unsaturated ketones (1, 9 and 12) in the presence of a catalytic amount of propionic acid causes a rearrangement to give new gamma,delta-unsaturated ketones (2, 10 and 14) via an intramolecular ene reaction followed by a retro-ene reaction.

Molecular structure of Lantadene-B&C, triterpenoids ofantana camara, red variety: Lantadene-B, 22β-angeloyloxy-3-oxoolean-12-en-28-oic acid; Lantadene-C, 22 β-(S)-2′-methyl butanoyloxy-3-oxoolean-12-en-28-oic acid

(I)Lantadene-B: C35H52O5,M r =552.80, MonoclinicC2,a=25.65(1),b=6.819(9),c=18.75(1) Å,beta=100.61(9),V=3223(5) Å3,Z=4,D x =1.14 g cm–3 CuKagr (lambda=1.5418A),mgr=5.5 cm–1,F(000)=1208,R=0.118,wR=0.132 for 1527 observed reflections withF o ge2sgr(F o ). (II)Lantadene-C: C35H54O5·CH3OH,Mr=586.85, Monoclinic,P21,a=9.822(3),b=10.909(3),c=16.120(8)Å,beta=99.82(4),V=1702(1)Å3,Z=2,D x =1.145 g cm–3, MoKagr (lambda=0.7107Å), mgr=0.708 cm–1 F(000)=644,R=0.098, wR=0.094 for 1073 observed reflections. The rings A, B, C, D, and E aretrans, trans, trans, cis fused and are in chair, chair, sofa, half-chair, chair conformations, respectively, in both the structures. In the unit cell the molecules are stabilized by O-HctdotO hydrogen bonds in both the structures, however an additional C-HctdotO interaction is observed in the case of Lantadene-C.

Dense granular flow down an inclined plane A comparison between the hard particle model and soft particle simulations

The granular flow down an inclined plane is simulated using the discrete element (DE) technique to examine the extent to which the dynamics of an unconfined dense granular flow can be well described by a hard particle model First, we examine the average coordination number for the particles in the flow down an inclined plane using the DE technique using the linear contact model with and without friction, and the Hertzian contact model with friction The simulations show that the average coordination number decreases below 1 for values of the spring stiffness corresponding to real materials, such as sand and glass, even when the angle of inclination is only 10 larger than the angle of repose Additional measures of correlations in the system, such as the fraction of particles with multibody contact, the force ratio (average ratio of the magnitudes of the largest and the second largest force on a particle), and the angle between the two largest forces on the particle, show no evidence of force chains or other correlated motions in the system An analysis of the bond-orientational order parameter indicates that the flow is in the random state, as in event-driven (ED) simulations V Kumaran, J Fluid Mech 632, 107 (2009), J Fluid Mech 632, 145 (2009)] The results of the two simulation techniques for the Bagnold coefficients (ratio of stress and square of the strain rate) and the granular temperature (mean square of the fluctuating velocity) are compared with the theory V Kumaran, J Fluid Mech 632, 107 (2009), J Fluid Mech 632, 145 (2009)] and are found to be in quantitative agreement In addition, we also conduct a comparison of the collision frequency and the distribution of the precollisional relative velocities of particles in contact The strong correlation effects exhibited by these two quantities in event-driven simulations V Kumaran, J Fluid Mech 632, 145 (2009)] are also found in the DE simulations (C) 2010 American Institute of Physics doi 10 1063/1 3504660]

Influence of Substrate Temperature and Deposition Rate on Structural and Mechanical Properties of Shape Memory NiTi Films

NiTi thin films deposited by DC magnetron sputtering of an alloy (Ni/Ti:45/55) target at different deposition rates and substrate temperatures were analyzed for their structure and mechanical properties. The crystalline structure, phase-transformation and mechanical response were characterized by X-ray diffraction (XRD), Differential Scanning Calorimetry (DSC) and Nano-indentation techniques, respectively. The films were deposited on silicon substrates maintained at temperatures in the range 300 to 500 degrees C and post-annealed at 600 degrees C for four hours to ensure film crystallinity. Films deposited at 300 degrees C and annealed for 600 degrees C have exhibited crystalline behavior with Austenite phase as the prominent phase. Deposition onto substrates held at higher deposition temperatures (400 and 500 degrees C) resulted in the co-existence of Austenite phase along with Martensite phase. The increase in deposition rates corresponding to increase in cathode current from 250 to 350 mA has also resulted in the appearance of Martensite phase as well as improvement in crystallinity. XRD analysis revealed that the crystalline film structure is strongly influenced by process parameters such as substrate temperature and deposition rate. DSC results indicate that the film deposited at 300 degrees C had its crystallization temperature at 445 degrees C in the first thermal cycle, which is further confirmed by stress temperature response. In the second thermal cycle the Austenite and Martensite transitions were observed at 75 and 60 degrees C respectively. However, the films deposited at 500 degrees C had the Austenite and Martensite transitions at 73 and 58 degrees C, respectively. Elastic modulus and hardness values increased from 93 to 145 GPa and 7.2 to 12.6 GPa, respectively, with increase in deposition rates. These results are explained on the basis of change in film composition and crystallization. (C) 2010 Published by Elsevier Ltd

Expression of microinjected foreign DNA in silkworm,bombyx mori

As a prelude to achieving transgenesis in Bombyx mori, conditions have been established for successful microinjection of cloned foreign genes into the silk worm eggs. A sharpened metallic needle is used to pierce the thick chorion layer of the eggsheil, approaching through a droplet of DNA solution deposited on its surface. The microinjection is carried out within 2-2.5 h after oviposition and the injected eggs show 3-5% hatchability and 80-90% survival. Such larvae continuously expressed the microinjected cloned reporter gene, beta-galactosidase, placed under the control of a constitutively expressed cytoplasmic actin A3 gene promoter from B. mori. The expression is seen in different tissues, viz. the fat body, tracheae and the silk glands, till the late larval instars. The microinjected DNA sequences are retained in the adult G(o) moths.

Modified Crack Closure Integral (MCCI) For 3-D Problems Using 20-Noded Brick Elements

The Modified Crack Closure Integral (MCCI) technique based on Irwin's crack closure integral concept is very effective for estimation of strain energy release rates G in individual as well as mixed-mode configurations in linear elastic fracture mechanics problems. In a finite element approach, MCCI can be evaluated in the post-processing stage in terms of nodal forces and displacements near the crack tip. The MCCI expressions are however, element dependent and require a systematic derivation using stress and displacement distributions in the crack tip elements. Earlier a general procedure was proposed by the present authors for the derivation of MCCI expressions for 3-dimensional (3-d) crack problems modelled with 8-noded brick elements. A concept of sub-area integration was proposed to estimate strain energy release rates at a large number of points along the crack front. In the present paper a similar procedure is adopted for the derivation of MCCI expressions for 3-d cracks modelled with 20-noded brick elements. Numerical results are presented for centre crack tension and edge crack shear specimens in thick slabs, showing a comparison between present results and those available in the literature.

Chance constrained uncertain classification via robust optimization

This paper studies the problem of constructing robust classifiers when the training is plagued with uncertainty. The problem is posed as a Chance-Constrained Program (CCP) which ensures that the uncertain data points are classified correctly with high probability. Unfortunately such a CCP turns out to be intractable. The key novelty is in employing Bernstein bounding schemes to relax the CCP as a convex second order cone program whose solution is guaranteed to satisfy the probabilistic constraint. Prior to this work, only the Chebyshev based relaxations were exploited in learning algorithms. Bernstein bounds employ richer partial information and hence can be far less conservative than Chebyshev bounds. Due to this efficient modeling of uncertainty, the resulting classifiers achieve higher classification margins and hence better generalization. Methodologies for classifying uncertain test data points and error measures for evaluating classifiers robust to uncertain data are discussed. Experimental results on synthetic and real-world datasets show that the proposed classifiers are better equipped to handle data uncertainty and outperform state-of-the-art in many cases.