979 resultados para performance indices
Resumo:
This paper reports on a new façade system that uses passive solutions in the search for energy efficiency. The differentials are the versatility and flexibility of the modules, which are important advantages of the system. The thermal performance of Trombe walls and glazings and the daylighting performance of glazing were the key aspects analyzed in the results. Computational simulations were accomplished for the thermal performance of different arrangements of the modules with DesignBuilder software. The glazing daylighting performance was studied by means of Ecotect and Desktop Radiance programs and compared with the transmittance curves of glazings. Occupancy profile and internal gains were fixed according to the Portuguese reality for both studies. The main characteristics considered in this research were the use of two double glazings, four different climates in Portugal and one and two Trombe walls in the façade. The results show an important reduction in the energy consumption with the use of Trombe walls and double self-cleaning glazing in the façade, which also presented better daylighting performance.
Resumo:
Dissertação de mestrado em Optometria Avançada
Resumo:
Aims: To evaluate the differences in linear and complex heart rate dynamics in twin pairs according to fetal sex combination [male-female (MF), male-male (MM), and female-female (FF)]. Methods: Fourteen twin pairs (6 MF, 3 MM, and 5 FF) were monitored between 31 and 36.4 weeks of gestation. Twenty-six fetal heart rate (FHR) recordings of both twins were simultaneously acquired and analyzed with a system for computerized analysis of cardiotocograms. Linear and nonlinear FHR indices were calculated. Results: Overall, MM twins presented higher intrapair average in linear indices than the other pairs, whereas FF twins showed higher sympathetic-vagal balance. MF twins exhibited higher intrapair average in entropy indices and MM twins presented lower entropy values than FF twins considering the (automatically selected) threshold rLu. MM twin pairs showed higher intrapair differences in linear heart rate indices than MF and FF twins, whereas FF twins exhibited lower intrapair differences in entropy indices. Conclusions: The results of this exploratory study suggest that twins have sex-specific differences in linear and nonlinear indices of FHR. MM twins expressed signs of a more active autonomic nervous system and MF twins showed the most active complexity control system. These results suggest that fetal sex combination should be taken into consideration when performing detailed evaluation of the FHR in twins.
Resumo:
Tese de Doutoramento em Ciências Empresariais.
Resumo:
OBJECTIVE: To compare the accuracy of 4 different indices of cardiac risk currently used for predicting perioperative cardiac complications. METHODS: We studied 119 patients at a university-affiliated hospital whose cardiac assessment had been required for noncardiac surgery. Predictive factors of high risk for perioperative cardiac complications were assessed through clinical history and physical examination, and the patients were followed up after surgery until the 4th postoperative day to assess the occurrence of cardiac events. All patients were classified according to 4 indices of cardiac risk: the Goldman risk-factor index, Detsky modified risk index, Larsen index, and the American Society of Anesthesiologists' physical status classification and their compared accuracies, examining the areas under their respective receiver operating characteristic (ROC) curves. RESULTS: Cardiac complications occurred in 16% of the patients. The areas under the ROC curves were equal for the Goldman risk-factor index, the Larsen index, and the American Society of Anesthesiologists' physical status classification: 0.48 (SEM ± 0.03). For the Detsky index, the value found was 0.38 (SEM ± 0.03). This difference in the values was not statistically significant. CONCLUSION: The cardiac risk indices currently used did not show a better accuracy than that obtained randomly. None of the indices proved to be significantly better than the others. Studies to improve our ability to predict such complications are still required.
Resumo:
Mestrado em Contabilidade, Fiscalidade e Finanças Empresariais
Resumo:
The relationship between estimated and real motor competences was analyzed for several tasks. Participants were 303 children (160 boys and 143 girls), which had between 6 and 10 years of age (M=8.63, SD=1.16). None of the children presented developmental difficulties or learning disabilities, and all attended age-appropriate classes. Children were divided into three groups according to their age: group 1 (N= 102; age range: 6.48-8.01 years); group 2 (N= 101; age range: 8.02-9.22 years); and group 3 (N=100; age range: 9.24-10.93 years). Children were asked to predict their maximum distance for a locomotor, a manipulative, and a balance task, prior to performing those tasks. Children’s estimations were compared with their real performance to determine their accuracy. Children had, in general, a tendency to overestimate their performance (standing long jump: 56.11%, kicking: 63.37%, throwing: 73.60%, and Walking Backwards (WB) on a balance beam: 45.21%), and older children tended to be more accurate, except for the manipulative tasks. Furthermore, the relationship between estimation and real performance in children with different levels of motor coordination (Köperkoordinationstest für Kinder, KTK) was analyzed. The 75 children with the highest score comprised the Highest Motor Coordination (HMC) group, and the 78 children with the lowest score were placed in the Lowest Motor Coordination (LMC) group. There was a tendency for LMC and HMC children to overestimate their skills at all tasks, except for the HMC group at the WB task. Children with the HMC level tended to be more accurate when predicting their motor performance; however, differences in absolute percent error were only significant for the throwing and WB tasks. In conclusion, children display a tendency to overestimate their performance independently of their motor coordination level and task. This fact may be determinant to the development of their motor competences, since they are more likely to engage and persist in motor tasks, but it might also increase the occurrence of unintended injuries.
Resumo:
OBJETIVO: Avaliar o valor preditivo do índice de performance miocárdica (IPM) para complicações cardiovasculares em pacientes de baixo risco no pós-operatório (PO) de cirurgia de revascularização miocárdica (CRM) no período de internação hospitalar. MÉTODOS: Foram estudados 80 pacientes submetidos a CRM com função ventricular esquerda adequada no pré-operatório, nos quais o IPM foi medido nas primeiras horas de pós-operatório. Os pacientes foram acompanhados até a alta hospitalar. A análise estatística incluiu teste qui-quadrado de Pearson, teste t de Student e teste de Mann-Whitney, além do cálculo do risco relativo, com intervalos de confiança de 95%, e das propriedades de sensibilidade e especificidade do índice, com elaboração de curva ROC. RESULTADOS: Os dados foram avaliados por dois observadores independentes, cegos aos dados clínicos, com variabilidade intra e interobservador não significativa. Encontrou-se IPM=0,43 como ponto de corte, considerando-se acima de 0,43 os pacientes com maior probabilidade de eventos no pós-operatório. Os eventos relevantes para análise foram IAM (RR 0,87; IC 0,21 - 3,65); fibrilação atrial (RR 0,65; IC 0,24 - 1,76); outras arritmias (RR 1,51; IC 0,36 - 6,33) e disfunção VE (RR 1,74; IC 0,31 - 9,88), não havendo associação entre pacientes com IPM>0,43 e a ocorrência destes eventos. O tempo de internação hospitalar foi similar, entre os grupos (p=0,999). CONCLUSÃO: Não houve associação do IPM com complicações cardiovasculares e maior tempo de internação neste grupo de pacientes, podendo-se considerar esse índice inadequado como método preditivo isolado.
Resumo:
El objeto de estudio de este proyecto son los sistemas de calentamiento de agua mediante energía solar que funcionan termosifónicamente. En particular se tratará con dos diseños particulares generados por fabricantes de la Provincia de Córdoba y que han solicitado el asesoramiento del Grupo de Energía Solar (GES) para el mejoramiento de la performance térmica de dichos equipos. Se trata de dos sistemas que tienen materiales no tradicionales y se diferencian además por tener una distinta disposición del tanque de almacenamiento: uno es en forma vertical y el otro en forma horizontal. Basados en los resultados de un ensayo bajo norma internacional, donde se detectaron algunas puntos factibles de mejora, se propone en este proyecto el análisis en detalle de los equipos, para lo cual se les debe desarmar completos, para realizar un estudio analítico y experimental de los mismos con el objeto de hacer un planteo teórico-analítico del comportamiento de los mismos, con la implementación de propuestas de mejora y chequeo de los resultados. Se propone entonces como objetivo lograr un mejoramiento de la performance térmica de los citados equipos a partir de un estudio experimental y analítico. Asumiendo esta posibilidad de mejora, se plantea la hipótesis de que es posible representar el funcionamiento de estos equipos mediante modelos físico-matemáticos desarrollados a partir de ecuaciones y correlaciones conocidas y procesos a interpretar mediante resoluciones numéricas y softwares específicos de simulación. De esta manera, se plantea el despieze completo de los equipos para estudiar en detalle su estructura y conexiones internas y a partir de la geometría, dimensiones y propiedades termofísicas de materiales constructivos y fluidos de trabajo, realizar modelos físico-matemáticos que permitan realizar variaciones de propiedades y geometría y así buscar las mejores combinaciones que produzcan equipos más eficientes térmicamente. Los modelos físico-matemáticos serán codificados en lenguajes de alto nivel para poder luego de una validación de los modelos, correr simulaciones en un software de reconocimiento internacional que permite sumar dichos modelos mediante un protocolo de comunicación, haciendo que las poderosas prestaciones del software se puedan aplicar a nuestros modelos. Se complementará el estudio con un análisis exergético para identificar los puntos críticos en que se producen las pérdidas de oportunidad de aprovechar la energía disponible, para así analizar cómo solucionar los problemas en dichos puntos. Los materiales a utilizar serán los propios equipos provistos por los fabricantes, que serán modificados convenientemente para operarlos como prototipos Se espera obtener un conocimiento acabado de los procesos y principios de funcionamiento de los equipos, que permita plantear las mejoras, las cuales se implementarán en los prototipos, realizándose una medición mediante norma igual a la inicial para ver en que magnitud se logran las mejoras esperadas. Se pretende además que las mejoras a implementar, en la etapa de transferencia a las empresas involucradas, redunden no sólo en un beneficio técnico, sino que también los sea desde el punto de vista económico. Para ello se trabajará también sobre los procesos y métodos de fabricación para que los equipos mejorados no sean mas caros que los originales y de ser posible sean aún más económicos, todo esto apuntando a la difusión de la energía solar térmica y poner al alcance de todos estos equipos tan convenientes para la propagación de las energías limpias. El proyecto redundará también en un importante beneficio para el conocimiento de la comunidad científica en general, con el aporte de nuevos resultados en diseños novedosos y con nuevos materiales. Además, la institución se beneficiará con la formación que obtendrán los integrantes del proyecto, muchos de ellos en etapa de realización de sus estudios de posgrado y en una etapa importante de su vida como investigadores. The main goal of this project is the improvement of two thermosyphonic solar water heating systems, made of non conventional materials and with different arrangement of their storage tanks: one is vertical and the other one horizontal. The thermosyphonic systems are provided by manufacturers of the Córdoba Province, who came to the Solar Energy Group (GES) of the National University of Río Cuarto looking for help for the design of their products. In an agreement with these manufacturers, it was proposed this project in order to work analytically and experimentally in order to obtain physical-mathematical models of these two systems, which allow for changes to look by means of simulations the best changes to implement on the equipments for the improvement of their thermal performance. Then, the materials to be used are the proper systems provided by the manufacturers, which will be disarmed to be studied in detail. After the analytical study the proposals of improvement will be implemented in a high level language of programming to perform simulations in the environment of a well-known software for energy simulations (TRNSYS). After the simulations, the best modifications will be physically implemented in the prototypes to perform finally the same normalized test of the beginning and check the magnitude of the implemented improvements. The importance of this project is based on the offer of better systems the companies would make, which would benefit the deployment of the thermal solar energy. Another relevant point is to make the new equipments at the same cost of the previous ones or cheaper, in order to achieve a good deployment of the solar water heating systems; then, the manufacture processes and methods must be studied to obtain not only good technical solutions, but also economical equipments. In addition, this project will contribute to the increasing of the knowledge in the area of thermosyphonic solar systems and the training of postgraduate students.
Resumo:
Las actividades agropecuarias ejercen diferentes presiones sobre los recursos naturales. Esto ha llevado, en algunas áreas, a un deterioro del suelo que provoca un impacto sobre la sustentabilidad en los sistemas agropecuarios. Para evaluar la degradación del suelo se han propuesto listas de indicadores, sin embargo, se carece de una herramienta metodológica robusta, adaptada a las condiciones edafoclimáticas regionales. Además, existe una demanda de productores e instituciones interesados en orientar acciones para preservar el suelo. El objetivo de este proyecto es evaluar la degradación física, química y biológica de los suelos en agroecosistemas del centro-sur de Córdoba. Por ello se propone desarrollar una herramienta metodológica que consiste en un set de indicadores físicos, químicos y biológicos, con valores umbrales, integrados en índices de degradación, que asistan a los agentes tomadores de decisiones y productores, en la toma de decisiones respecto de la degradación del suelo. El área de trabajo será una región agrícola del centro-sur de Córdoba con más de 100 años de agricultura. La metodología comienza con la caracterización del uso del territorio y sistemas de manejo, su clasificación y la obtención de mapas base de usos y manejos, mediante sensores remotos y encuestas. Se seleccionarán sitios de muestreo mediante una metodología semi-dirigida usando un SIG, asegurando un mínimo de un punto de muestreo por unidad de mapeo. Se elegirán sitios de referencia lo más cercano a una condición natural. Los indicadores a evaluar surgen de listas propuestas en trabajos previos del grupo, seleccionados en base a criterios internacionales y a adecuados a suelos de la región. Se usarán indicadores núcleo y complementarios. Para la obtención de umbrales, se usarán por un lado valores provenientes de la bibliografía y por otro, umbrales generados a partir de la distribución estadística del indicador en suelos de referencia. Para estandarizar cada indicador se definirá una función de transformación. Luego serán ponderarán mediante análisis estadísticos mulivariados e integrados en índices de degradación física, química y biológica, y un índice general de degradación. El abordaje concluirá con el desarrollo de dos instrumentos para la toma de decisiones: uno a escala regional, que consistirá en mapas de degradación en base a unidades cartográficas ambientales, de uso del territorio y de sistemas de manejo y otro a escala predial que informará sobre la degradación del suelo de un lote en particular, en comparación con suelos de referencia. Los actores interesados contarán con herramientas robustas para la toma de decisiones respecto de la degradación del suelo tanto a escala regional como local. Agricultural activities exert different pressures on natural resources. In some areas this has led to soil degradation and has an impact on agricultural sustainability. To assess soil degradation a robust methodological tool, adapted to regional soil and climatic conditions, is lacking. In addition, there is a demand from farmers and institutions interested in direct actions to preserve the soil. The objective of this project is to assess physical, chemical and biological soil degradation in agroecosystems of Córdoba. We propose to develop a tool that consists of a set of physical, chemical and biological indicators, with threshold values, integrated in soil degradation indices. The study area is a region with more than 100 years of agriculture. The methodology begins with the characterization of land use and management systems and the obtaining of base maps by means of remote sensing and survey. Sampling sites will be selected through a semi-directed methodology using GIS, ensuring at least one sampling point by mapping unit. Reference sites will be chosen as close to a natural condition. The proposed indicators emerge from previous works of the group, selected based on international standards and appropriate for the local soils. To obtain the thresholds, we will use, by one side, values from the literature, and by the other, values generated from the statistical distribution of the indicator in the reference soils. To standardize indicators transformation functions will be defined. Indicators will be weighted by mans of multivariate analysis and integrated in soil degradation indices. The approach concluded with the development of two instruments for decision making: a regional scale one, consisting in degradation maps based on environmental, land use and management systems mapping units; and an instrument at a plot level which will report on soil degradation of a particular plot compared to reference soils.
Resumo:
The objectives of this thesis are three. Firstly, finding and analyzing the differences of performance management system in SMEs in Ireland and China. Secondly, finding the cultural differences between China and Ireland and thirdly, integrating the research outcomes of the above research objectives, and then analyzing the effect of these cultural differences on performance management system in SMEs in China and Ireland.
Resumo:
Spread spectrum, Automotive Radar, Indoor Positioning Systems, Ultrasonic and Microwave Imaging, super resolution technique and wavelet transform
Resumo:
Performance monitoring, ERN, CRN, Pe, Memory, Llist learning, Emotion, IAPS, N2, Reinforcement Learning Hypothesis, Conflict Monitoring Hypothesis
Resumo:
Category, frequency contour, monkey, auditory cortex, neuron, spike
Resumo:
Social intelligence