A Legislator under Surveillance: The Creation and Implementation of Swiss Banking Legislation 1910-1934

This paper analyses how banking regulation was introduced in Switzerland - one of the world's most prominent financial centres - which remained in place until the beginning of the twenty-first century. It shows that the law adopted on 8 November 1934 is a perfect example of capture of the regulator by the regulated. Essentially a political response in the context of the economic crisis of the 1930s, it largely reflected the interests of banking circles by limiting the intervention of the State as much as possible. The introduction of the new legislation was facilitated by the temporary weakness of Swiss banking circles, as they depended on the State to delay or prevent the collapse of many major credit institutions. They did not manage to derail the law as they had two decades earlier when they scuppered the federal bill on banks drawn up between 1914 and 1916. But this time they were better organized and more united, and intervened all the more effectively in the legislative process itself. The 1934 law is thus distinctive in that it made no structural changes to the architecture of the financial centre but merely codified its practices through flexible legislation meant to reassure the public. The law was aimed less at controlling banking activity than at keeping - thanks to skilfully calibrated political concessions - the State from having to intervene more directly in the internal management of banks or in the fixing of interest rates and the export of capital.

Eligibility to treatment and economic effect of the implementation of the new U.S. or European Society of Hypertension/European Society of Cardiology hypertension guidelines.

OBJECTIVE: To evaluate the population and economic impact of implementing the new Joint National Committee (JNC) or European Society of Hypertension (ESH)/European Society of Cardiology (ESC) hypertension guidelines in the Swiss population. METHODS: Cross-sectional, population-based sample (6708 participants) collected between 2003 and 2006 in the city of Lausanne, Switzerland. Blood pressure categories were defined according to both the JNC (JNC-7 and JNC-8) and the ESH/ESC (2007 and 2013) guidelines. RESULTS: The proportion of participants aged 35-60 years eligible for drug treatment was 25.6% [95% confidence interval (CI) 24.4-26.9%] and 24.8% (95% CI 23.6-26.0%) for the JNC-7 and the JNC-8 guidelines, respectively; for participants aged 60-75 years, the values were 62.3% (95% CI 60.1-64.5%) and 46.8% (95% CI 44.5-49.0%), respectively. Shifting from the JNC-7 to the JNC-8 guidelines would lead to an annual saving of 163.6 million Swiss francs (187.7 million US dollars or 134.5 million European euro). The proportion of participants aged 35-75 years without chronic kidney disease, diabetes mellitus or reported history of cardiovascular disease and eligible for treatment was 30.2% (95% CI 29.0-31.4%) for the ESH/ESC 2007 and 2013 guidelines. For participants with chronic kidney disease, diabetes mellitus or reported history of cardiovascular disease, the values were 73.6% (95% CI 70.8-76.3%) and 55.6% (95% CI 52.5-58.8%), respectively. Shifting from the ESH/ESC 2007 to the ESH/ESC 2013 guidelines would lead to an annual saving of 86.9 million Swiss francs (99.5 million US dollars or 71.4 million European euro). CONCLUSION: In Switzerland, shifting from the JNC-7 to the JNC-8 guidelines or from the ESH/ESC 2007 to the ESH/ESC 2013 guidelines would decrease the prevalence of patients eligible for treatment and increase the percentage of treated patients within blood pressure goals. Both strategies lead to potential savings in antihypertensive drug treatment.

Experimental implementation of tightly focused beams with unpolarized transversal component at any plane

The aim of this paper is to provide a formal framework for designing highly focused fields with specific transversal features when the incoming beam is partially polarized. More specifically, we develop a field with a transversal component that remains unpolarized in the focal area. Moreover, its longitudinal component exhibits non-zero values on axis. Special attention is paid to the design of the input beam and the development of the experiment. The implementation of such fields is possible by using an interferometric setup combined with the use of digital holography techniques. Experimental results are compared with those obtained numerically.

Evaluation of Implementation of BSc IT Curriculum at Tumaini University

In Tanzania computer knowledge is vital to supplement the pace fast growing economic and development activities, which demands high and reliable level of expertise in com- puting field. In 2006, a research carried out at Tumaini University with purpose to design and implement a contextualized curriculum that can supplement for such needs hence facilitate development in Tanzanian context. A contextualized curriculum took advantage of six principles namely curriculum contex- tualization, projects, practical, interdisciplinary orientation, international recognition and continuous research for the program’s formative and development. Implementation of the curriculum followed the CATI (Contextualize, Apply, Transfer, and Import) model with emphasis on students to identify societal expectations at the early stage in learning process, in which case the graduates will potentially cater for societal expertise needs on ICT. This study adopts an emergent exploratory cross-section research design, while employ- ing a qualitative approach. This study was conducted at Tumaini University in Iringa where by purposeful sampling was used to obtain participants such as students, teach- ers, administrators and employers who participated in several focus group discussions, in-depth interviews and participant observation. The study reveals that six principles are satisfactorily met,despite of bottlenecks such as incompatibility in pedagogical thinking and technology availability for e-learning, learning attitudes, insufficient experts with actual skills and experience,in academic field among the others. The study recommends that iterative longitudinal study should be car- ried out to design for proper intervention in response to these problems which will help in improving and stabilize the curriculum.

Present and future methodology for the implementation of decision support systems for traffic management

Real-time predictions are an indispensable requirement for traffic management in order to be able to evaluate the effects of different available strategies or policies. The combination of predicting the state of the network and the evaluation of different traffic management strategies in the short term future allows system managers to anticipate the effects of traffic control strategies ahead of time in order to mitigate the effect of congestion. This paper presents the current framework of decision support systems for traffic management based on short and medium-term predictions and includes some reflections on their likely evolution, based on current scientific research and the evolution of the availability of new types of data and their associated methodologies.

Productivity of Business Services - Towards A New Taxonomy

Statistics show that the expanding service sector accounts already for three quarters of GDP in the developed economies. Moreover, there is abundant evidence on high variation in productive performance across the service industries. This suggests divergent technological and institutional trajectories within the tertiary sector. While conceptual knowledge on services and their performance has accumulated substantially, the overall landscape on productivity and competitiveness is still inconclusive. As noted by number of authors the research on service productivity is still in its infancy. The purpose of this paper is to develop further the analytical framework of service productivity. The approach is based on the notion that service definitions, classifications and performance measurement are strongly interdependent. Given the ongoing restructuring of businesses activities with higher information content, it is argued that the dichotomy between manufacturing and services should not be taken too far. Industrial evolution also suggests that the official industry classifications are increasingly outdated and new taxonomies for empirical research are therefore needed. Based on the previous analyses and new insights the paper clarifies the debated concept of service productivity and identifies the critical dimensions by which the service industries cluster. It is also demonstrated that the dimensions enable to construct new service taxonomies which bear essentially on productivity opportunities at the business level. Needles to say the key determinant explaining the development and potential of productivity growth is innovation activity. As an extensive topic of research, however, service innovation is tackled here only in a cursory way. The paper is constructed as follows: the first section focuses on the conceptual issues and evolving nature of service activities. A workable definition of service should capture the diversity of service activities, as well as the aspects of service processes, comprehensively. The distinctions and similarities between services and manufacturing are discussed, too. Section 2 deals with the service productivity, a persistent and controversial issue in academic literature and policy. With the assessments of strengths and weaknesses of the main schools new insights based on value creation will be brought in. Industry classifications and taxonomies are discussed in Section 3. It begins with a short analysis of the official classifications and their evaluation from the perspective of empirical research. Using well-known examples it is shown that the taxonomies on the manufacturing industries have a clear analogy with the business services. As there is a growing interest to regroup services too, the work to date, has been less systematic and inherently qualitative. Based on the earlier contributions threedimensional service taxonomy is constructed which highlight the key dimensions of productive performance. The main findings and implications are summed up in Section 4.

Design and implementation of a leisure program to improve function and wellbeing in people with depressive disorder

Depression is a major cause of disability and disease with significant costs to the health system and for the whole society. Regarding the treatment, in recent years has questioned the effectiveness of antidepressant drugs, with a recognition that although depressive disorders tend to improve with these treatments, residual symptoms seems to be still the norm, which is associated with the risk of new episodes or relapses, and faster its appearance. Otherwise many of the specialized clinical guidelines, propose a based on stepped-care model intervention, prioritizing less intrusive actions, including low-intensity psychosocial-interventions.

Optimization and practical implementation of ultrafast 2D NMR experiments

Ultrafast 2D NMR is a powerful methodology that allows recording of a 2D NMR spectrum in a fraction of second. However, due to the numerous non-conventional parameters involved in this methodology its implementation is no trivial task. Here, an optimized experimental protocol is carefully described to ensure efficient implementation of ultrafast NMR. The ultrafast spectra resulting from this implementation are presented based on the example of two widely used 2D NMR experiments, COSY and HSQC, obtained in 0.2 s and 41 s, respectively.

Design and implementation of a multipurpose reactor for scale-up studies

In the theoretical part, the different polymerisation catalysts are introduced and the phenomena related to mixing in the stirred tank reactor are presented. Also the advantages and challenges related to scale-up are discussed. The aim of the applied part was to design and implement an intermediate-sized reactor useful for scale-up studies. The reactor setting was tested making one batch of Ziegler–Natta polypropylene catalyst. The catalyst preparation with a designed equipment setting succeeded and the catalyst was analysed. The analyses of the catalyst were done, because the properties of the catalyst were compared to the normal properties of Ziegler–Natta polypropylene catalyst. The total titanium content of the catalyst was slightly higher than in normal Ziegler–Natta polypropylene catalyst, but the magnesium and aluminium content of the catalyst were in the normal level. By adjusting the siphonation tube and adding one washing step the titanium content of the catalyst could be decreased. The particle size of the catalyst was small, but the activity was in a normal range. The size of the catalyst particles could be increased by decreasing the stirring speed. During the test run, it was noticed that some improvements for the designed equipment setting could be done. For example more valves for the chemical feed line need to be added to ensure inert conditions during the catalyst preparation. Also nitrogen for the reactor needs to separate from other nitrogen line. With this change the pressure in the reactor can be kept as desired during the catalyst preparation. The proposals for improvements are presented in the applied part. After these improvements are done, the equipment setting is ready for start-up. The computational fluid dynamics model for the designed reactor was provided by cooperation with Lappeenranta University of Technology. The experiments showed that for adequate mixing with one impeller, stirring speed of 600 rpm is needed. The computational fluid dynamics model with two impellers showed that there was no difference in the mixing efficiency if the upper impeller were pumping downwards or upwards.

Usability Centered Implementation of a Web Based Value Added Module

Customer specific functionalities are a challenging part of procurement and invoice automation environments. In Basware Enterprise Purchase to Payment product family the customer specific reports are supported only in a basic level without any seamless interface between all EPP products. Also other customer specific functionalities are not supported as there is no customizable interface between the applications and only the most common features are implemented to the products themselves. In this thesis foundations are created for a new web based value added module where it is possible to create seamless customer specific functionalities throughout the whole EPP product family. The work is implemented in a Proof of Concept type of piloting. The system is created in user centered way where the users are able to explain their requests and determine their needs. The result is an excellent foundation for a module that can be developed further.

Regional potential for collaborative implementation of small CHP plants in bioenergy technology

This thesis is a preliminary study targeting South-Eastern Finland. The objective was to find out the financial and functional readiness and willingness of the small and medium-sized enterprises of the region to manufacture and sell distributed bioenergy solutions collaboratively as a business network. In this case these solutions mean small-scale (0.5 - 3 MW) woodchips-operated combined heat and power (CHP) plants. South-Eastern Finland has suffered from a decline in the recent years, mostly due to the problems of the traditionally strong industrial know-how area of the region, the paper industry. Local small and medium-sized companies will have to find new ways to survive the toughening competition. A group of 40 companies from suitable industries were selected and financial and comparative analysis was performed on them. Additionally 19 managing directors of the companies were selected for an interview to find out their views on networking, its requirements, advantages and the general interest in it. The studied companies were found to be generally in fairly good financial condition and in that sense, fit for networking activities. The interviews revealed that the companies were capable of producing all the needed elements for the plants in question, and the managers appeared to be very interested in and have a positive attitude towards such business networks. Thus it can be said that the small and medium-sized companies of the region are capable of and interested in manufacturing small bio-CHP plants as a production network.

Design and Implementation of MUPE Server Context Tool for Eclipse IDE

The development of software tools begun as the first computers were built. The current generation of development environments offers a common interface to access multiple software tools and often also provide a possibility to build custom tools as extensions to the existing development environment. Eclipse is an open source development environment that offers good starting point for developing custom extensions. This thesis presents a software tool to aid the development of context-aware applications on Multi-User Publishing Environment (MUPE) platform. The tool is implemented as an Eclipse plug-in. The tool allows developer to include external server side contexts to their MUPE applications. The tool allows additional context sources to be added through the Eclipse's extension point mechanism. The thesis describes how the tool was designed and implemented. The implementation consists of tool core component part and an additional context source extension part. Tool core component is responsible for the actual context addition and also provides the needed user interface elements to the Eclipse workbench. Context source component provides the needed context source related information to the core component. As part of the work an update site feature was also implemented for distributing the tool through Eclipse update mechanism.

Consistency and change in Finnish broadcasting policy : the implementation of digital television and lessons from the Canadian experience

Konsistens och förändring i finländsk etermediapolitik. Implementering av digital television och en jämförelse med Kanada Avhandlingen handlar om hur det finländska televisionssystemet förändrades i slutet av 1990-talet från en nationell institution till ett dualistiskt system som präglas av stark marknadsorientering. Syftet med avhandlingen är att förstå på vilket sätt en så snabb förändring kunde ske och analysera de institutionella faktorerna bakom utvecklingen. På teoretisk nivå diskuteras tesen om det nära sambandet mellan statliga politiska institutioner och rundradioverksamhetens institutioner. Avhandlingen består av två fallstudier. Den första sätter fokus på de första åren av den finländska televisionens digitaliseringsprocess som startade med starka industriell-nationalistiska motiveringar. Analysen, som baserar på offentliga dokument, sträcker sig framtill hösten 2001 då de digitala televisionssändningarna startade och regeringspropositionen om den nya kommunikationsmarknadslagen lämnades till riksdagen. Dessa policy-processer analyseras som en ”marknadisering” av de traditionella styrningsprinciper och idéer gällande finländsk rundradioverksamheten. En jämförelse mellan Finlands och Kanadas nationella rundradiopolitik gör att man kan koppla slutsatserna till den internationella utvecklingen. Jämförelsen visar hur kommunikationspolitiska linjen i de två länderna har kommit att likna varandra trots att ländernas tv-system och deras styrordningar är mycket olika. Exemplet med Kanada visar att den särskilda teknologin inte är viktig utan snarare de kommersiella intressen som står bakom och som beslutsfattare gärna döljer i en nationalistisk retorik. Studien visar att det är viktigt att beakta vilken tyngd man i politiken ger de två sidor som rundradioverksamheten består av: sändningsteknologin och verksamheten som en speciell kulturform. Nationalstatens handlingsutrymme minskar inom fältet om målet är att vara framgångsrik i konkurrensen i den nya internationella ekonomin. Enligt de nyliberalistiska principer som det politiska systemet överlag har tillägnat sig det är önskvärd men också helt inhemska institutionella traditioner och praxis som följdes i den finländska digitaliseringsprocessen främjade utvecklingen som ledde till att nästan alla ursprungliga nationella syften föll sönder.

The effects of national legislation on the implementation of IFRS in Finland and Russia

This study examines the possible differences in IFRS implementation between Finnish and Russian companies as well as reasons behind them by theoretical means as well as by incorporating a case study of two companies.