BMP-2 induces the expression of chondrocyte-specific genes in bovine synovium-derived progenitor cells cultured in three-dimensional alginate hydrogel

OBJECTIVE: According to recent reports, the synovial membrane may contain mesenchymal stem cells with the potential to differentiate into chondrocytes under appropriate conditions. In order to assess the usefulness of synovium-derived progenitor cells for the purposes of cartilage tissue engineering, we explored their requirements for the expression of chondrocyte-specific genes after expansion in vitro. DESIGN: Mesenchymal progenitor cells were isolated from the synovial membranes of bovine shoulder joints and expanded in two-dimensions on plastic surfaces. They were then seeded either as micromass cultures or as single cells within alginate gels, which were cultured in serum-free medium. Under these three-dimensional conditions, chondrogenesis is known to be supported and maintained. Cell cultures were exposed either to bone morphogenetic protein-2 (BMP-2) or to isoforms of transforming growth factor-beta (TGF-beta). The levels of mRNA for Sox9, collagen types I and II and aggrecan were determined by RT-PCR. RESULTS: When transferred to alginate gel cultures, the fibroblast-like synovial cells assumed a rounded form. BMP-2, but not isoforms of TGF-beta, stimulated, in a dose-dependent manner, the production of messenger RNAs (mRNAs) for Sox9, type II collagen and aggrecan. Under optimal conditions, the expression levels of cartilage-specific genes were comparable to those within cultured articular cartilage chondrocytes. However, in contrast to cultured articular cartilage chondrocytes, synovial cells exposed to BMP-2 continued to express the mRNA for alpha1(I) collagen. CONCLUSIONS: This study demonstrates that bovine synovium-derived mesenchymal progenitor cells can be induced to express chondrocyte-specific genes. However, the differentiation process is not complete under the chosen conditions. The stimulation conditions required for full transformation must now be delineated.

Three-dimensional imaging core laboratory of the endovascular aneurysm repair trials: validation of methodology

OBJECTIVE: The aim of this study was to establish and validate a three-dimensional imaging protocol for the assessment of Computed Tomography (CT) scans of abdominal aortic aneurysms in UK EVAR trials patients. Quality control and repeatability of anatomical measurements is important for the validity of any core laboratory. METHODS: Three different observers performed anatomical measurements on 50 preoperative CT scans of aortic aneurysms using the Vitrea 2 three-dimensional post-imaging software in a core laboratory setting. We assessed the accuracy of intra and inter observer repeatability of measurements, the time required for collection of measurements, 3 different levels of automation and 3 different automated criteria for measurement of neck length. RESULTS: None of the automated neck length measurements demonstrated sufficient accuracy and it was necessary to perform checking of the important automated landmarks. Good intra and limited inter observer agreement were achieved with three-dimensional assessment. Complete assessment of the aneurysm and iliacs took an average (SD) of 17.2 (4.1) minutes. CONCLUSIONS: Aortic aneurysm anatomy can be assessed reliably and quickly using three-dimensional assessment but for scans of limited quality, manual checking of important landmarks remains necessary. Using a set protocol, agreement between observers is satisfactory but not as good as within observers.

Disentangling the effects of low self-esteem and stressful events on depression: Findings from three longitudinal studies

Diathesis-stress models of depression suggest that low self-esteem and stressful events jointly influence the development of depressive affect. More specifically, the self-esteem buffering hypothesis states that, in the face of challenging life circumstances, individuals with low self-esteem are prone to depression because they lack sufficient coping resources, whereas those with high self-esteem are able to cope effectively and consequently avoid spiraling downward into depression. The authors used data from 3 longitudinal studies of adolescents and young adults, who were assessed 4 times over a 3-year period (Study 1; N = 359), 3 times over a 6-week period (Study 2; N = 249), and 4 times over a 6-year period (Study 3; N = 2,403). In all 3 studies, low self-esteem and stressful events independently predicted subsequent depression but did not interact in the prediction. Thus, the results did not support the self-esteem buffering hypothesis but suggest that low self-esteem and stressful events operate as independent risk factors for depression. In addition, the authors found evidence in all 3 studies that depression, but not low self-esteem, is reciprocally related to stressful events, suggesting that individuals high in depression are more inclined to subsequently experience stressful events.

Three-dimensional primary stability of cementless femoral stems

OBJECTIVE: This study investigates by means of a new bone-prosthesis interface motion detector whether conceptual design differences of femoral stems are reflected in their primary stability pattern. DESIGN: An in vitro experiment using a biaxial materials testing machine in combination with three-dimensional motion measurement devices was performed. BACKGROUND: Primary stability of uncemented total hip replacements is considered to be a prerequisite for the quality of bony ongrowth to the femoral stem. Dynamic motion as a response to loading as well as total motion of the prosthesis have to be considered under quasi-physiological cyclic loading conditions. METHODS: Seven paired fresh cadaveric femora were used for the testing of two types of uncemented femoral stems with different anchoring concepts: CLS stem (Spotorno) and Cone Prosthesis (Wagner). Under sinusoidal cyclic loading mimicking in vivo hip joint forces a new measurement technique was applied allowing for the analysis of the three-dimensional interface motion. RESULTS: Considerable differences between the two prostheses could be detected both in their dynamic motion and total motion behaviour. Whereas the CLS stem, due to the wedge-shaped concept, provides smaller total motions, the longitudinal ribs of the Cone prostheses result in a substantially smaller dynamic motion. CONCLUSIONS: The measuring technique provided reliable and accurate data illustrating the three-dimensional interface motion of uncemented femoral stems.

Presence in a Three-Dimensional Test Environment: Benefit or Threat to Market Research?

In market research, the adoption of interactive virtual reality-techniques could be expected to contain many advantages: artificial lab environments could be designed in a more realistic manner and the consideration of “time to the market”-factors could be improved. On the other hand, with an increasing degree of presence and the notional attendance in a simulated test environment, the market research task could fall prey to the tensing virtual reality adventure. In the following study a 3D-technique is empirically tested for its usability in market research. It will be shown that the interactive 3D-simulation is not biased by the immersion it generates and provides considerably better test results than 2D-stimuli do.

Accuracy and reproducibility of aortic annulus sizing using a dedicated three-dimensional computed tomography reconstruction tool in patients evaluated for transcatheter aortic valve replacement

Aims: To evaluate the accuracy and reproducibility of aortic annulus sizing using a multislice computed tomography (MSCT) based aortic root reconstruction tool compared with conventional imaging among patients evaluated for transcatheter aortic valve replacement (TAVR). Methods and results: Patients referred for TAVR underwent standard preprocedural assessment of aortic annulus parameters using MSCT, angiography and transoesophageal echocardiography (TEE). Three-dimensional (3-D) reconstruction of MSCT images of the aortic root was performed using 3mensio (3mensio Medical Imaging BV, Bilthoven, The Netherlands), allowing for semi-automated delineation of the annular plane and assessment of annulus perimeter, area, maximum, minimum and virtual diameters derived from area and perimeter (aVD and pVD). A total of 177 patients were enrolled. We observed a good inter-observer variability of 3-D reconstruction assessments with concordance coefficients for agreement of 0.91 (95% CI: 0.87-0.93) and 0.91 (0.88-0.94) for annulus perimeter and area assessments, respectively. 3-D derived pVD and aVD correlated very closely with a concordance coefficient of 0.97 (0.96-0.98) with a mean difference of 0.5±0.3 mm (pVD-aVD). 3-D derived pVD showed the best, but moderate concordance with diameters obtained from coronal MSCT (0.67, 0.56-0.75; 0.3±1.8 mm), and the lowest concordance with diameters obtained from TEE (0.42, 0.31-0.52; 1.9±1.9 mm). Conclusions: MSCT-based 3-D reconstruction of the aortic annulus using the 3mensio software enables accurate and reproducible assessment of aortic annulus dimensions.

Pathology working group review of histopathologic specimens from three laboratory studies of diclofenac in trout.

While the pathology peer review/pathology working group (PWG) model has long been used in mammalian toxicologic pathology to ensure the accuracy, consistency, and objectivity of histopathology data, application of this paradigm to ecotoxicological studies has thus far been limited. In the current project, the PWG approach was used to evaluate histopathologic sections of gills, liver, kidney, and/or intestines from three previously published studies of diclofenac in trout, among which there was substantial variation in the reported histopathologic findings. The main objectives of this review process were to investigate and potentially reconcile these interstudy differences, and based on the results, to establish an appropriate no observed effect concentration (NOEC). Following a complete examination of all histologic sections and original diagnoses by a single experienced fish pathologist (pathology peer review), a two-day PWG session was conducted to allow members of a four-person expert panel to determine the extent of treatment-related findings in each of the three trout studies. The PWG was performed according to the United States Environmental Protection Agency (US EPA) Pesticide Regulation (PR) 94-5 (EPA Pesticide Regulation, 1994). In accordance with standard procedures, the PWG review was conducted by the non-voting chairperson in a manner intended to minimize bias, and thus during the evaluation, the four voting panelists were unaware of the treatment group status of individual fish and the original diagnoses associated with the histologic sections. Based on the results of this review, findings related to diclofenac exposure included minimal to slightly increased thickening of the gill filament tips in fish exposed to the highest concentration tested (1,000 μg/L), plus a previously undiagnosed finding, decreased hepatic glycogen, which also occurred at the 1,000 μg/L dose level. The panel found little evidence to support other reported effects of diclofenac in trout, and thus the overall NOEC was determined to be >320 μg/L. By consensus, the PWG panel was able to identify diagnostic inconsistencies among and within the three prior studies; therefore this exercise demonstrated the value of the pathology peer review/PWG approach for assessing the reliability of histopathology results that may be used by regulatory agencies for risk assessment.

Three-dimensional, task-specific robot therapy of the arm after stroke: a multicentre, parallel-group randomised trial

BACKGROUND: Arm hemiparesis secondary to stroke is common and disabling. We aimed to assess whether robotic training of an affected arm with ARMin--an exoskeleton robot that allows task-specific training in three dimensions-reduces motor impairment more effectively than does conventional therapy. METHODS: In a prospective, multicentre, parallel-group randomised trial, we enrolled patients who had had motor impairment for more than 6 months and moderate-to-severe arm paresis after a cerebrovascular accident who met our eligibility criteria from four centres in Switzerland. Eligible patients were randomly assigned (1:1) to receive robotic or conventional therapy using a centre-stratified randomisation procedure. For both groups, therapy was given for at least 45 min three times a week for 8 weeks (total 24 sessions). The primary outcome was change in score on the arm (upper extremity) section of the Fugl-Meyer assessment (FMA-UE). Assessors tested patients immediately before therapy, after 4 weeks of therapy, at the end of therapy, and 16 weeks and 34 weeks after start of therapy. Assessors were masked to treatment allocation, but patients, therapists, and data analysts were unmasked. Analyses were by modified intention to treat. This study is registered with ClinicalTrials.gov, number NCT00719433. FINDINGS: Between May 4, 2009, and Sept 3, 2012, 143 individuals were tested for eligibility, of whom 77 were eligible and agreed to participate. 38 patients assigned to robotic therapy and 35 assigned to conventional therapy were included in analyses. Patients assigned to robotic therapy had significantly greater improvements in motor function in the affected arm over the course of the study as measured by FMA-UE than did those assigned to conventional therapy (F=4.1, p=0.041; mean difference in score 0.78 points, 95% CI 0.03-1.53). No serious adverse events related to the study occurred. INTERPRETATION: Neurorehabilitation therapy including task-oriented training with an exoskeleton robot can enhance improvement of motor function in a chronically impaired paretic arm after stroke more effectively than conventional therapy. However, the absolute difference between effects of robotic and conventional therapy in our study was small and of weak significance, which leaves the clinical relevance in question.

Three-dimensional structure of tropism-switching Bordetella bacteriophage.

Bacteriophage BPP-1, which infects Bordetella species, can switch its specificity by mutations to the ligand-binding surface of its major tropism-determinant protein, Mtd. This targeted mutagenesis results from the activity of a phage-encoded diversity-generating retroelement. Purified Mtd binds its receptor with low affinity, yet BPP-1 binding and infection of Bordettella cells are efficient because of high-avidity binding between phage-associated Mtd and its receptor. Here, using an integrative approach of three-dimensional (3D) structural analyses of the entire phage by cryo-electron tomography and single-prticle cryo-electron microscopy, we provide direct localization of Mtd in the phage and the structural basis of the high-avidity binding of the BPP-1 phage. Our structure shows that each BPP-1 particle has a T = 7 icosahedral head and an unusual tail apparatus consisting of a short central tail "hub," six short tail spikes, and six extended tail fibers. Subtomographic averaging of the tail fiber maps revealed a two-lobed globular structure at the distal end of each long tail fiber. Tomographic reconstructions of immuno-gold-labeled BPP-1 directly localized Mtd to these globular structures. Finally, our icosahedral reconstruction of the BPP-1 head at 7A resolution reveals an HK97-like major capsid protein stabilized by a smaller cementing protein. Our structure represents a unique bacteriophage reconstruction with its tail fibers and ligand-binding domains shown in relation to its tail apparatus. The localization of Mtd at the distal ends of the six tail fibers explains the high avidity binding of Mtd molecules to cell surfaces for initiation of infection.

Toxic Stress and Child Hunger Over the Life Course: Three Case Studies

The causes and contexts of food insecurity among children in the U.S. are poorly understood because the prevalence of food insecurity at the child level is low compared to the prevalence of household food insecurity. In addition, caregivers may be reluctant to admit their children may not be getting enough food due to shame or fear they might lose custody of their children. Based on our ongoing qualitative research with mothers of young children, we suggest that food security among children is related to adverse childhood experiences of caregivers. This translates into poor mental and physical health in adolescence and adulthood, which can lead to inability to secure and maintain meaningful employment that pays a living wage. In this paper we propose that researchers shift the framework for understanding food insecurity in the United States to adopt a life course approach. This demands we pay greater attention to the lifelong consequences of exposure to trauma or toxic stress—exposure to violence, rape, abuse and neglect, and housing, food, and other forms of deprivation—during childhood. We then describe three case studies of women from our ongoing study to describe a variety of toxic stress exposures and how they have an impact on a woman’s earning potential, her mental health, and attitudes toward raising children. Each woman describes her exposure to violence and deprivation as a child and adolescent, describes experiences with child hunger, and explains how her experiences have shaped her ability to nourish her children. We describe ways in which we can shift the nature of research investigations on food insecurity, and provide recommendations for policy-oriented solutions regarding income support programs, early intervention programs, child and adult mental health services, and violence prevention programs.