A novel postharvest rot of okra pods caused by Rhizoctonia solani in Brazil

Okra pods with unusual brown lesions and rot were collected in a local supermarket in Brasília DF. The objective of this paper was to characterize the causal agent, to fulfill Koch's postulates and to determine some conditions conducive to disease. The pathogen was identified as Rhizoctonia solani based on morphological characteristics which fitted the fungus description, such as pale to brown hyphae, with nearly right-angled side branches constricted at the base, hyphal cells 6-10 µm wide with a septum near the base. Five isolates were obtained from infected pods and identified as AG 1-IB anastomosis group. Wounded or unwounded okra pods cv. Santa Cruz 47 were inoculated with mycelium disks of R. solani and kept in humid chambers at 12 ºC or 25 ºC. After seven days at 25 ºC, both wounded and unwounded pods were completely rotted and brown, while those kept at 12 ºC showed small lesions ranging from 0.6 to 1.0 mm only in wounded pods. The pathogen was able to grow in different materials used for assembling crates and packs of horticultural products, such as pinewood, corrugated carton, plastic, Styrofoam and newspaper sheets when kept in humid chambers (24 ºC, 96 % RH). The disease occurrence can be related to careless handling practices and to the transmission of R. solani propagules by infected plant debris or soil particles. This is the first report of Rhizoctonia solani causing postharvest rot in okra pods in Brazil.

Natural and synthetic fibres improving tensile strength and elongation of paper products

The theory part of the Master’s thesis introduces fibres with high tensile strength and elongation used in the production of paper or board. Strong speciality papers are made of bleached softwood long fibre pulp. The aim of the thesis is to find new fibres suitable for paper making to increase either tensile strength, elongation or both properties. The study introduces how fibres bond and what kind of fibres give the strongest bonds into fibre matrix. The fibres that are used the in manufacturing of non-wovens are long and elastic. They are longer than softwood cellulose fibres. The end applications of non-wovens and speciality papers are often the same, for instance, wet napkins or filter media. The study finds out which fibres are used in non-wovens and whether the same fibres could be added to cellulose pulp as armature fibres, what it would require for these fibres to be blended in cellulose, how they would bind with cellulose and whether some binding agents or thermal bonding, such as hot calendaring would be necessary. The following fibres are presented: viscose, polyester, nylon, polyethylene, polypropylene and bicomponent fibres. In the empiric part of the study the most suitable new fibres are selected for making hand sheets in laboratory. Test fibres are blended with long fibre cellulose. The test fibres are viscose (Tencel), polypropylene and polyethylene. Based on the technical values measured in the sheets, the study proposes how to continue trials on paper machine with viscose, polyester, bicomponent and polypropylene fibres.

Pankki- ja vakuutustoiminnan asiakaskannattavuus ja asiakkuuksien johtaminen

The main objective of this master’s thesis was to determine, what are the insights, challenges and problems related to differing business logics and principles of income generation and how can they be integrated in a financial group with insurance and banking operations from the perspective of customer profitability. Review of the industrial specific features had a high priority in the study. The study is a qualitative case study with empirical data collected from semi-structured interviews. Qualitative research method was chosen since it produces kind of data required to answer the research questions. Interviewees were chosen from different organizational levels to achieve a comprehensive big picture of the subject. The key result of the study is that the most important factor for the customer profitability on the financial sector is to find and fulfill the customer needs with a comprehensive service package. Also long-term customer relationships were considered significant and customer life cycle assessment essential. In the case-organization the most significant factors in this process were a strong local presence and the tacit knowledge of the customers’ business and activities, although there are major challenges in systematic exploitation of this information. The management of the customer profitability in case-organization faces great challenges because of the history of growth via acquisitions, which has led to so-called “problem of the two balance sheets”, conflict in corporate culture and establishment of the mutual goals and performance measurement.

Osavalmistuksen tuotannonohjauksen kehittäminen liikkuvia työkoneita valmistavassa yrityksessä

Tämän diplomityön tavoitteena oli kehittää erään liikkuvia työkoneita valmistavan yrityksen osavalmistuksen tuotannonohjausta. Ohjauksen kehittämisessä otettiin huomioon myös tehtaan liityntäpinnat, eli koko tilaus- toimitusketju. Tuotannonohjauksesta oli tavoitteena kehittää visuaalinen ja mahdollisimman itseohjautuva. Työssä on selvitetty osavalmistuksen nykytilanne ja ohjauksen ongelmakohdat. Kappaleiden valmistamiseen käytettävät vaiheajat tarkastettiin ja tutkittiin tehtaalla valmistettavien merkittävien osien kohdalta. Osasta tuotteista selvitettiin myös tuotteiden valmistuksen läpäisyajat konkreettisten seurantalomakkeiden avulla. Yritykselle soveltuvin ohjausmallin runko etsittiin työn tavoitteen ja toimintaympäristön kautta. Lopulta parhaaksi valitun ohjausmallin toimivuus varmistettiin tietokoneavusteisen simuloinnin avulla. Toiminnan tehostamiseksi työssä on annettu idea myös kuinka tehtaan layoutia olisi hyvä muuttaa. Ohjausmallin käytännön toteutuksesta on työssä annettu esimerkki. Esimerkissä on huomioitu millaista visuaalista ratkaisua olisi parasta käyttää ohjauksen itseohjautuvuuden lisäämiseksi. Työssä annettu myös ideoita kuinka osien varastointia ja kotiinkutsujen tekemistä olisi hyvä parantaa sekä miten saldotietoja saisi mahdollisesti helpommin ylläpidettäväksi.

Accelerated ageing like a vigour test to diasporas of Myracrodruon urundeuva Fr. Allem

This work established the adequate temperature and the period of exposition for the accelerated ageing test with diasporas of Myracrodruon urundeuva from an area of the Cerrado in the state of Mato Grosso, Brazil. Before and after the ageing, at the temperatures of 40ºC, 41ºC, 42ºC and 45ºC combined with periods of 12, 18, 24, 30 and 36 hours, the water content and germination were evaluated. For each treatment, 12g of diasporas in mini chambers with 40 mL of distilled water were submitted to the accelerated ageing test. A total of 100 diasporas, divided into four replications, in plastic boxes, on two sheets of blotting paper, in germinator at 25ºC and 8 hours of photoperiod were germinated. In all treatments the content of water of the aged diasporas was superior to 20% and this value stabilized itself between 25% and 28%, from the 18 hours of exposition. Independently of the tested periods, the ageing at the temperatures of 40ºC, 41ºC and 42ºC did not affect the germination. After the ageing at 45ºC, the germination did not differ among the periods of 12, 18 and 24 hours of exposition, but in all these periods it was inferior to the control and superior to the periods of 30 and 36 hours. In these last two periods, fungi were observed. The accelerated ageing of diasporas of Myracrodruon urundeuva should be conducted at the temperature of 45ºC, during the exposition periods of 12 to 24 hours.

Sähköalan PK-yrityksen taloudellinen terveys

Työn kohteena on kaksi kotkalaista sähköasennusalan yritystä, Kotkan Käämityö Oy ja Kotkan Sähkötyö Oy. Kohdeyritysten taloudellinen tilanne on heikentynyt merkittävästi vuosien 2009 ja 2010 aikana. Työssä tarkastellaan kohdeyritysten talouden kehitystä sekä tähän kehitykseen johtaneita syitä vuosina 2005-2010. Työn pääasiallinen tutkimusmenetelmä on tunnuslukuja hyväksi käyttäen toteutettu tilinpäätösanalyysi. Tilinpäätösanalyysiä tuettiin vertailemalla kohdeyritysten talouden kehitystä kuvaavia tunnuslukuja sähköasennusalan ja alueellisten kilpailijoiden lukuihin. Lisäksi kohdeyrityksille laadittiin kannattavuusrajalaskelmat sekä skenaariomenetelmää hyväksi käyttäen tulos- ja tase-ennusteet vuosille 2011-2013. Kohdeyritykset ovat reagoineet taseidensa huononevaan tilaan myymällä omaisuutta ja järjestelemällä uudelleen liiketoimintaansa. Molempien kohdeyritysten kannattavuuden ennustettiin paranevan huomattavasti vuonna 2011. Epävarma toimintaympäristö muodostaa kuitenkin jatkuvan haasteen yritysten toiminnan kannattavuudelle ja jatkuvuudelle. Yritysten tulisi tulevaisuudessa keskittyä parantamaan varsinaisen liiketoimintansa kannattavuutta.

EVALUATION OF SUBSTRATES AND AMF SPORULATION IN THE PRODUCTION OF SEEDLINGS OF NATIVE FOREST SPECIES

ABSTRACT The objective of this study was to evaluate organic substrates in the production of canafistula (Peltophorum dubium) (Spreng.) Taub, cutieira (Joannesiaprinceps Vell.), jatoba (Hymenaea courbaril L.) and rubber tree (Hevea brasiliensis M. Arg.) seedlings, native trees with potential use in forest restoration programs. The design was completely randomized with 10 substrate formulations with 4 repetitions of 3 plants for the four species. The evaluated substrates consisted of soil, bovine manure (BM), poultry manure (PM), chemical fertilizer (CF) and sand, in different proportions. The experiment was concluded at the end of 180 days for canafistula, cutieira and rubber and 210 days for jatoba. At the end of these periods, the root (RDM), shoot (SDM) and total (TDM) the dry matters of the seedlings were determined. Quantification of AMF spores and normalization between samples through SPORES/RDM correction were also performed. The Scott-Knott test at 5% probability was applied. Regarding biomass production, only canafistula had significant difference among the tested substrates. In relation to sporulation, the highest values were observed in cutieira and rubber tree in substrate containing PM. The substrates composed of 40 or 50% soil + 20% sand + 30% or 40 PM for canafistula; 50% soil + 20% sand + 30% PM for cutieira; and for jatoba and rubber tree 60% soil + 20% sand + 20% PM, enabled the best results in terms of biomass production in seedlings and AMF sporulation.

Laserkeilainperustainen puulajiluokitus - puu- ja metsikkötekijöiden, opetusaineiston koon, laserintesiteetin normalisoinnin sekä keilainmallin vaikutus

Seloste artikkelista: Korpela, I., Ørka, H. O., Maltamo, M., Tokola, T. & Hyyppä, J. / Tree species classification using airborne LiDAR - effects of stand and tree parameters, downsizing of training set, intensity normalization, and sensor type. Silva Fennica 44 (2010) : 2, 319-339.

Modern Metallic Materials for Arctic Environment

This thesis is part of the Arctic Materials Technologies Development –project, which aims to research and develop manufacturing techniques, especially welding, for Arctic areas. The main target of this paper is to clarify what kind of European metallic materials are used, or can be used, in Arctic. These materials include mainly carbon steels but also stainless steels and aluminium and its alloys. Standardized materials, their properties and also some recent developments are being introduced. Based on this thesis it can be said that carbon steels (shipbuilding and pipeline steels) have been developed based on needs of industry and steels exist, which can be used in Arctic areas. Still, these steels cannot be fully benefited, because rules and standards are under development. Also understanding of fracture behavior of new ultra high strength steels is not yet good enough, which means that research methods (destructive and non-destructive methods) need to be developed too. The most of new nickel-free austenitic and austenitic-ferritic stainless steels can be used in cold environment. Ferritic and martensitic stainless steels are being developed for better weldability and these steels are mainly developed in nuclear industry. Aluminium alloys are well suitable for subzero environment and these days high strength aluminium alloys are available also as thick sheets. Nanotechnology makes it possible to manufacture steels, stainless steels and aluminium alloys with even higher strength. Joining techniques needs to be developed and examined properly to achieve economical and safe way to join these modern alloys.

Membraanin modifiointi happo- ja alkoholikäsittelyillä

Tässä diplomityössä tutkittiin alkoholilla ja orgaanisella hapolla tehtävien esikäsittelyiden vaikutusta nanosuodatuskalvon ominaisuuksiin. Työn tarkoituksena oli parantaa nanosuodatuskalvon fraktiointiominaisuuksia sekä kasvattaa monosakkaridien suotautuvuutta. Tarkasteluissa käytetty membraani oli GE Osmonicsin valmistamaa Desal-5 DL nanosuodatuskalvoa, jota modifioitiin erilaisilla maitohappo- ja isopropanoliesikäsittelyillä. Suodatukset tehtiin kahdella erilaisella laboratoriomittakaavan levysuotimella käyttäen malliaineina väkevää sokeriliuosta sekä laimeampaa sokeri-suola-liuosta. Happo- ja alkoholiesikäsiteltyjen kalvojen vuo- ja retentioarvoja verrattiin referensseinä käytettyjen vesiliotettujen kalvojen vastaaviin arvoihin. Puhtaat esikäsitellyt kalvot analysoitiin myös tarkemmin kalvoissa tapahtuneiden muutosten ymmärtämiseksi. Suodatusten ja analyysitulosten perusteella sekä alkoholi- että happoesikäsittelyt paransivat nanosuodatuskalvon ominaisuuksia parantaen sokerivuota, heikentämättä kuitenkaan kalvon fraktiointikykyä eri moolimassan omaavien sokereiden suhteen. Hapolla saavutettiin hieman alkoholikäsittelyä suotuisammat muutokset, mutta molemmilla käsittelyillä haluttujen komponenttien retentio monesti jopa parani referenssikalvoon verrattuna. Havaitut muutokset kalvoissa olivat pääosin fysikaalisia, mutta erityisesti happokäsittely muutti kalvon rakennetta myös kemiallisesti. Molemmat käsittelyt lisäsivät myös tarkasteltavan membraanin hydrofiilisuutta.

Hypothalamic-pituitary-gonadal function in men with liver cirrhosis before and after liver transplantation

Objective: To evaluate the influence of end-stage liver disease and orthotopic liver transplantation in the pituitary function and hormone metabolism before and after liver transplantation.Methods: In a prospective study, serum levels of follicle stimulating hormone (FSH), luteinizing hormone (LH), estradiol (E2) and prolactin (PRL) of 30 male patients with cirrhosis were determined two to four hours before and six months after liver transplantation. The results were compared according to the Model for End-stage Liver Disease (MELD).Results: male patients with liver cirrhosis have hypogonadism. FSH was normal, but inappropriately low due to androgen failure; E2 and PRL, on their turn, were high. After liver transplantation, FSH and LH levels increased (p < 0.05), whereas E2 and PRL normalized (p < 0.05). The MELD score did not influence changes in FSH, PRL and LH, however, the more severe the cirrhosis was, the more significant was the normalization of E2 (p = 0.01).Conclusion: Patients with cirrhosis and male hypogonadism have inappropriately normal levels of FSH and LH, associated with an increase in E2 and LRP. After liver transplantation, FSH and LH increased, while E2 and PRL returned to normal. Changes in E2 levels were most pronounced in patients with MELD > 18. The severity of cirrhosis had no influence on FSH, PRL and LH.

IFRS-standardien noudattaminen liikearvon raportoinnissa suomalaisissa listayhtiöissä

Tutkimuksen tavoitteena oli tutkia liikearvoon liittyvien IFRS 3- ja IAS 36 –standardien säännösten noudattamista suomalaisten korkean liikearvon määrän omaavien listayhtiöiden tilinpäätöksissä. Teoria muodostettiin tarkastelemalla aihepiirin tieteellisiä julkaisuja, sekä yritysten kirjanpitoa ohjailevia liikearvoon liittyviä säännöksiä. Tutkimusmenetelmä oli kvalitatiivinen, ja empiirisenä aineistona käytettiin viiden yrityksen tilinpäätöksiä vuodelta 2011. Yritykset valittiin tarkastelemalla liikearvon suhteellista osuutta omasta pääomasta. Analysointimenetelmänä käytettiin sisällönanalyysia, ja tutkimuksen runko muodostettiin tilintarkastukseen tarkoitetun tarkastuslistan avulla. Tutkimuksessa tuotettiin tarkkaa ja kuvailevaa tietoa säännösten noudattamisesta kohdeyrityksissä. IFRS 3- ja IAS 36 –standardeissa on määritelty tarkat esitysvaatimukset tilinpäätöksissä esitettävälle liikearvoon liittyvälle tiedolle. Esitettäviä tietoja ovat esimerkiksi kuvaus yritysostojen yhteydessä syntyneestä liikearvosta, sekä selvitys liikearvon arvonalentumistestauksessa käytetyistä avainoletuksista. Kohdeyritysten havaittiin noudattavan tutkimuksessa tarkasteltuja esitysvaatimuksia noin 94 % tarkkuudella. Virheet eivät keskittyneet tiettyihin esitysvaatimuksiin, vaan eri yritykset tekivät erilaisia virheitä liikearvon raportoinnissa.

Canine distemper virus detection in asymptomatic and non vaccinated dogs

A quantitative real time polymerase chain reaction (PCR) revealed canine distemper virus presence in peripheral blood samples from asymptomatic and non vaccinated dogs. Samples from eleven domestic dogs with no signs of canine distemper and not vaccinated at the month of collection were used. Canine distemper virus vaccine samples in VERO cells were used as positive controls. RNA was isolated with Trizol®, and treated with a TURBO DNA-free kit. Primers were designed for canine distemper virus nucleocapsid protein coding region fragment amplification (84 bp). Canine b-actin (93 bp) was utilized as the endogenous control for normalization. Quantitative results of real time PCR generated by ABI Prism 7000 SDS Software showed that 54.5% of dogs with asymptomatic canine distemper were positive for canine distemper virus. Dissociation curves confirmed the specificity of the real time PCR fragments. This technique could detect even a few copies of viral RNA and identificate subclinically infected dogs providing accurate diagnosis of this disease at an early stage.

Machine vision methods for process measurements in pulping

The papermaking industry has been continuously developing intelligent solutions to characterize the raw materials it uses, to control the manufacturing process in a robust way, and to guarantee the desired quality of the end product. Based on the much improved imaging techniques and image-based analysis methods, it has become possible to look inside the manufacturing pipeline and propose more effective alternatives to human expertise. This study is focused on the development of image analyses methods for the pulping process of papermaking. Pulping starts with wood disintegration and forming the fiber suspension that is subsequently bleached, mixed with additives and chemicals, and finally dried and shipped to the papermaking mills. At each stage of the process it is important to analyze the properties of the raw material to guarantee the product quality. In order to evaluate properties of fibers, the main component of the pulp suspension, a framework for fiber characterization based on microscopic images is proposed in this thesis as the first contribution. The framework allows computation of fiber length and curl index correlating well with the ground truth values. The bubble detection method, the second contribution, was developed in order to estimate the gas volume at the delignification stage of the pulping process based on high-resolution in-line imaging. The gas volume was estimated accurately and the solution enabled just-in-time process termination whereas the accurate estimation of bubble size categories still remained challenging. As the third contribution of the study, optical flow computation was studied and the methods were successfully applied to pulp flow velocity estimation based on double-exposed images. Finally, a framework for classifying dirt particles in dried pulp sheets, including the semisynthetic ground truth generation, feature selection, and performance comparison of the state-of-the-art classification techniques, was proposed as the fourth contribution. The framework was successfully tested on the semisynthetic and real-world pulp sheet images. These four contributions assist in developing an integrated factory-level vision-based process control.