Y-Ba-Cu-O mixed oxides for production of diphenols in liquid-solid phase

Superconductor mixed oxides were often used as catalysts at higher temperature in gas phase oxidations, and considered not suitable for lower temperature reactions in the liquid-solid phase; here the catalysis of YBa2Cu3O7+/-x and Y2BaCuO5+/-x in the phenol hydroxylation at lower temperature with H2O2 as oxygen donor was studied, and found that the superconductor YBa2Cu3O7+/-x, has no catalytic activity for phenol hydroxylation, but Y2BaCuO5+/-x does, even has better catalytic activity and stability than most previously reported ones. With the studies of catalysis of other simple metal oxides and perovskite-like mixed oxides, a radical substitution mechanism is proposed and the experimental facts are explained clearly, and draw a conclusion that the perovskite-like mixed oxides with (AO)(ABO(3)) and (AO)2(ABO(3)) structure have better catalytic activity than the simple perovskite oxides with (ABO(3))(3) structure alone, and (AO) structure unit is the key for the mixed oxides to have the phenol hydroxylation activity. No pollution of this process is very important for its further industrial application.

Amperometric biosensor for tyrosinase inhibitors in a pure organic phase

The determination of benzoic acid, thiourea and 2-mercaptoethanol in three pure organic solvents, viz., chloroform, chlorobenzene and 1,2-dichlorobenzene, by using an amperometric cryohydrogel tyrosinase biosensor is described. Measurements were carried out with phenol as the enzyme substrate. Kinetic parameters (K-i and I-50) were determined in the three solvents for various inhibitors. The sensor showed the most sensitive measurements to these inhibitors in pure chloroform. The solvent-induced deviation of the biosensor to thiourea was evaluated by means of Hill coefficients. The smallest deviation as observed in 1,2-dichlorobenzene, owing to the high hydrophobicity of this solvent. The nature of the inhibition process and its reversibility mere also examined.

Studies on morphology and crystallization of polypropylene/polyamide 12 blends

Scanning electron microscopy (SEM) and an image analyser are used to study morphologies of the fractured surface, etched by hot phenol, of polypropylene/maleated polypropylene/polyamide 12 PP/PP-MA/PA12) = 65/10/25 blend and PP-MA/PA12 = 75/25 blend. The particle dimension and its distribution of PA12 dispersed phase in these blends are much lower and narrower than that of the PP/PA12. blends. Especially, most of the particles in the PP-MA/PA12 = 75/25 blend are smaller than 0.1 mu m. The effect of the morphology of PP/PA12 blends on their crystallization behaviour is studied using differential scanning calorimetry and SEM. PA12 dispersed phase coarsens during annealing in the PP/PP-MA/PA12 = 65/10/25 blend. The mechanism of coarsening of the PA12 dispersed phase is a coalescence process. The intense mixing between the PP component and the PA12 component through reaction of PP-MA and PA12 leads to a change of dynamic mechanical behaviour of the components. A separation method is used to separate the polyolefin parts (precipitated from hot phenol), from PA12 parts (hot phenol filtrate). Of PP/PP-MA/PA12 = 65/10/25 blend, infra-red measurements and elementary analysis show that the precipitate has a lower PA12 content than the feed, whereas the filtrate has a higher PA12 content. From PP-MA/PA12 = 75/25 blend, PA12 contents in the precipitate and the filtrate are the same as in the feed. This implies that all PA12 has reacted with all PP-MA in the latter case while not in the former case. Using the method of interface exposure, interfacial reaction of PP-MA with PA12 is studied by X-ray photoelectron spectrometry (X.p.s.). Copyright (C) 1996 Elsevier Science Ltd.

Cyro-hydrogel for the construction of a tyrosinase-based biosensor

A new immobilization method for construction of a tyrosinase based biosensor is described. A simple physical freezing technique was adopted for preparation. The immobilized enzyme yields specific activities that are more than 22% of the soluble enzyme. The enzyme electrode can be stored in dry state for more than three months without any loss of activity. The biosensor was applied to the determination of several phenols and o-diphenols. The lowest detect limit is 0.02 mu mol/1 and the linear range was 1.0 X 10(-7)-1.0 X 10(-4) mol/1 for catechol. The kinetic parameters have also been calculated.

TEMPERATURE AND STRAIN-RATE DEPENDENCE OF FRACTURE-TOUGHNESS OF PHENOLPHTHALEIN POLYETHER KETONE

A strong strain-rate and temperature dependence was observed for the fracture toughness of phenolphthalein polyether ketone (PEK-C). Two separate crack-blunting mechanisms have been proposed to account for the fracture-toughness data. The first mechanism involves thermal blunting due to adiabatic heating at the crack tip for the high temperatures studied. In the high-temperature range, thermal blunting increases the fracture toughness corresponding to an effectively higher test temperature. However, in the low-temperature range, the adiabatic temperature rise is insufficient to cause softening and Jic increases with increasing temperature owing to viscoelastic losses associated with the p-relaxation there. The second mechanism involves plastic blunting due to shear yield/flow processes at the crack tip and this takes place at slow strain testing of the single-edge notched bending (SENB) samples. The temperature and strain-rate dependence of the plastic zone size may also be responsible for the temperature and strain-rate dependence of fracture toughness.

SYNTHESIS AND CHARACTERIZATION OF CROSS-LINKED 2ND-ORDER NONLINEAR-OPTICAL POLYMER

The present paper reports the synthesis of glycidyl monoether of 4-[(p-nitrophenyl) azo] phenol (GMNA) and crosslinking reaction of GMNA with hexamethylene diisocyanate biuret (HDIB). The Tg of crosslinked polymer was investigated by DSC. The orientation and stability of the poled and crosslinked polymer film were studied by UV-Vis spectra and Maker fringe method.

CONSTRUCTION OF A TYROSINASE-BASED BIOSENSOR IN PURE ORGANIC-PHASE

A novel immobilization method for construction of a tyrosinase-based biosensor applied in pure organic phase is described. This method gives the enzyme a hydrated shell which allows the enzyme to maintain its biocatalytic activity in a pure organic solvent The enzyme electrode was used to determine several phenols and o-diphenols in pure chloroform and chlorobenzene. The biosensor can be stored in dry state for more than 3 months without any loss of the activity. The kinetic parameters have also been calculated and are presented herein.

THE RADIATION STABILITY OF PERFLUOROALKOXY RESIN

By examining the changes in melting temperature, heat of fusion, tensile strength and ultimate elongation at 150-degrees-C, and weight loss, radiation effects on perfluoroalkoxy resins (PFA) were investigated. The results show that at the temperatures used here the predominant effect caused by radiation on PFA is degradation of the molecular weight. The radiation stability is much better than that of polytetrafluoroethylene, however.

PHASE-BEHAVIOR IN EPOXY-RESIN CONTAINING PHENOLPHTHALEIN POLY(ETHER ETHER SULFONE)

Phenolphthalein poly(ether ether sulphone) (PES-C) was found to be miscible with uncured bisphenol-A-type epoxy resin, i.e. diglycidyl ether of bisphenol A (DGEBA), as shown by the existence of a single glass transition temperature within the whole composition range. Miscibility between PES-C and DGEBA is considered to be due mainly to the entropy contribution. However, dynamic mechanical analysis (d.m.a.) and scanning electron microscopy (SEM) studies revealed that PES-C exhibits different miscibility with four cured epoxy resins (ER). The overall compatibility and the resulting morphology of the cured blends are dependent on the choice of cure agent. For the blends cured with amines (4,4'-diaminodiphenylmethane (DDM) and 4,4'-diaminodiphenylsulphone (DDS)), no phase separation occurs as indicated by either d.m.a. or SEM. However, for the blends cured with anhydrides (maleic anhydride (MA) and phthalic anhydride (PA)), both d.m.a. and SEM clearly show evidence of phase separation. SEM study shows that the two phases interact well in the MA-cured blend while the interface between the phases in the PA-cured blend is poorly bonded. The differences in the overall compatibility and the resulting morphology between the amine-cured and anhydride-cured systems have been discussed from the points of view of both thermodynamics and kinetics.

Expression, purification of recombinant flounder MRF4 protein in Escherichia coli and analysis of its polyclonal antibodies

MRF4 is one of muscle regulatory factors and plays critical roles during skeletal muscle development. The muscle development is important for the fish growth which is an important economic factor for the fish culture. To analyze the function of MRF4 in fish, the founder MRF4 antibody was prepared. The flounder MRF4 was cloned, ligated into prokaryotic expression vector pET-30b and expressed in strain E. coli BL21 (130). The recombinant flounder MRF4 fusion protein was soluble and purified with cobalt IMAC resins. To prepare MRF4 polyclonal antibodies, rabbits were immunized with the soluble protein and the increasing level of antibodies was determined by Western blot. Also, the endogenous flounder MRF4 was recognized by the anti-serum. The result further proved the existence of the anti-MRF4 antibody in the anti-serum, which will be useful for studies on the function of flounder MRF4.

牙鲆rag基因的克隆及表达研究

牙鲆在中国北方沿海地区形成了大规模的工厂化养殖，成为我国海水养殖的一大重要产业。然而疾病的频繁发生严重阻碍了这一产业的发展，为了保证牙鲆产业稳定、健康、持续地发展，开展鱼类免疫系统的基础研究，提高鱼类抵抗病原菌侵害的能力，本研究从牙鲆免疫系统的个体发育过程入手，克隆了其rag（recombination activating gene）基因，在此基础上对其组织特异性表达进行了分析。 研究结果表明牙鲆rag1基因由4个外显子和3个内含子组成，第一个外显子位于5’非翻译区，这一外显子存在两种不同的剪切方式。牙鲆rag1基因编码1068个氨基酸。牙鲆rag2基因的编码区序列长为1602 bp，编码533个氨基酸，没有在牙鲆rag2基因编码区内发现内含子的存在。rag基因间序列长为3128 bp，两个基因共用一段3’非编码区。 本试验通过RT-PCR检测发现，牙鲆的rag1和rag2基因在头肾和体肾中均有表达。整装原位杂交结果表明，牙鲆在受精后第8天开始起有rag1和rag2基因的表达，主要在胸鳍前面，腮背部的部位表达，这个区域与后来胸腺出现的位置相一致。冰冻切片结果显示，rag是在靠近咽部的区域有表达。石蜡切片原位杂交结果显示，rag基因在胸腺中的表达显示出不均一性，着色较深的为皮层区，而着色比较浅的为髓部。 将牙鲆rag1基因的一部分（编码559个氨基酸）和rag2全基因序列（编码533个氨基酸）插入到表达质粒pProEXTM HTa上，在大肠杆菌E. coli BL-21中进行体外表达与分析，结合BD TALONTM Metal Affinity Resins亲和柱纯化了RAG2蛋白。

A new brominated phenylpropylaldehyde and its dimethyl acetal from red alga Rhodomela confervoides

A new brominated phenylpropylaldehyde and its dimethyl acetal together with a new natural brominated phenol were isolated from Rhodomela confervoides. Their structrues were elucidated as 2-methyl-3-(2,3-dibromo-4,5-dihydroxyphenyl)propylaldehyde, 2-methyl-3-(2,3-dibromo-4,5-dihydroxyphenyl) propylaldehyde dimethyl acetal and 3-bromo-4,5-dihydroxybenzoic acid methyl ester by spectroscopic techniques including IR, HRFABMS, ID and 2DNMR experiments.

香叶蒿挥发油化学成分研究

为了分析香叶蒿挥发油的化学成分和进一步开发利用香叶蒿提供科学依据，本文采用水蒸气蒸馏法提取，运用气相色谱-质谱联用法对香叶蒿挥发油化学成分进行了分析，用气相色谱面积归一化法测定了各成分的相对百分含量。经毛细管色谱分离出56个峰，并鉴定出各峰所对应的化合物，其主要化学成分为桉树醇（Eucalyptol），樟脑（Camphor），孟烯醇4（Menthen-4-ol），异丁酮-2-基-苯（2-Butanone，3-phenyl），对异丁基苯酚（Phenol，4-（2-methylpropyl）等。香叶蒿挥发油中化合物含量丰富，且药用，及香料工业用的化合物含量较高，因此香叶蒿有很好的开发利用价值。

Mass spectrometric identification of multihydroxy phenolic compounds in Tibetan herbal medicines

A highly selective and accurate method based on derivatization with dansyl chloride coupled with liquid chromatography-mass spectrometry has been developed for identification of natural pharmacologically active phenolic compounds in extracts of Lomatogonium rotatum plants (Tibetan herbal medicine) obtained by solid-phase extraction. The number of hydroxyl groups on the dansylated phenols was estimated by LC-MS-MS analysis in positive-ion mode. Dansyl derivatization of the compounds introduced basic secondary nitrogen into the phenolic core structures and this was readily ionized when acidic HPLC mobile phases were used. MS fragmentation of the derivatives generated intense protonated molecular ions of m/z [MH](+) (phenol aglycones were transformed into the corresponding free phenols by cleavage of an aglycone bond). Collision-induced dissociation of the protonated molecule generated characteristic product ions of m/z 234 and 171 corresponding to the protonated 5-(dimethylamino)naphthalene sulfoxide and 5 -(dimethylamino) naphthalene moieties, respectively. Selected reaction monitoring based on the m/z [MH](+) to 234 and 171 transitions was highly specific for these phenolic compounds. Characteristic ions with m/z values of [MH - 234](+), [MH 2 x 234](+), and [MH - 3 x 234](+) were of great importance for estimation of the presence of multihydroxyl groups on the phenolic backbone.

Analysis of phenols by high-performance liquid chromatography with pre-column derivatization by 2-(9-carbazole)-ethyl-chloroformate

2-(9-Carbazole)-ethyl-chloroformate (CEOC), a novel pre-column fluorescence labeling reagent, has been synthesized and applied for the derivatization of phenols. Taken phenol, p-chlorophenol, 2,5-dimethylphenol, 2,4-dichlorophenol and 1,4-dihydroxybenzene as testing standards, the effects of derivatization conditions, such as pH of borate buffer, reaction time and fluorescent tagging reagent concentration, have been systematically studied. Under the optimized conditions, CEOC reacts readily with the phenols to form stable derivatives with excitation and emission wavelengths, respectively, at 293 and 360 nm. The single step derivatization reaction could be finished within 20 min even at room temperature. Such a method has been successfully applied to the analysis of phenols in printing ink by high-performance liquid chromatography. (c) 2005 Elsevier B.V. All rights reserved.