Total synthesis of lamellarin D and analogs library

Larnellarins are a group of marine natural products isolated from the prosobranch mollusc Lamellaria sp., the ascidian Didemnum sp., and the sponge Dendrilla Cactos. Several of them exhibit interesting biological activities. Natural as well as synthetic lamellarins should be excellent candidates for the development of new drugs due to their unique skeletal structure and their important biological activities especially as antitumor agents. Lamelarin O has been recently characterized as a topoisomerase 1-targeted anti tumor agent. A variety of synthetic approaches have been developed for this family of alkaloids. Herein we describe a new route to the synthesis of Lamellarin D, from a methyl 2-pyrrolecarboxylate. Transformation of the starting material into the scaffold, a substituted 5,6-dihydropyrrolo (2,l ­a)isoquinoline (5,6-DHPl), was afforded by N-alkylation followed by intramolecular Heck cyclization. From this scaffold the synthetic strategy is based on two sequential regioselective bromination!Suzuki cross-coupling reactions which permitted the introduction of differently substituted aryl groups on positions 1 and 2 followed by oxidation, deprotection, and lactonization.

Competence Development and Capacity Building of Sawmill Enterprises in Kenya – A Human Resources Development Approach

The Kenyan forestry and sawmilling industry have been subject to a changing environment since 1999 when the industrial forest plantations were closed down. This has lowered raw material supply and it has affected and reduced the sawmill operations and the viability of the sawmill enterprises. The capacity of the 276 registered sawmills is not sufficient to fulfill sawn timber demand in Kenya. This is because of the technological degradation and lack of a qualified labor force, which were caused because of non-existent sawmilling education and further training in Kenya. Lack of competent sawmill workers has led to low raw material recovery, under utilization of resources and loss of employment. The objective of the work was to suggest models, methods and approaches for the competence and capacity development of the Kenyan sawmilling industry, sawmills and their workers. A nationwide field survey, interviews, questionnaire and literature review was used for data collection to find out the sawmills’ competence development areas and to suggest models and methods for their capacity building. The sampling frame included 22 sawmills that represented 72,5% of all the registered sawmills in Kenya. The results confirmed that the sawmills’ technological level was backwards, productivity low, raw material recovery unacceptable and workers’ professional education low. The future challenges will be how to establish the sawmills’ capacity building and workers’ competence development. Sawmilling industry development requires various actions through new development models and approaches. Activities should be started for technological development and workers’ competence development. This requires re-starting of vocational training in sawmilling and the establishment of more effective co-operation between the sawmills and their stakeholder groups. In competence development the Enterprise Competence Management Model of Nurminen (2007) can be used, whereas the best training model and approach would be a practically oriented learning at work model in which the short courses, technical assistance and extension services would be the key functions.

The Influence of spanish vihuela and lute music on the development of early seventeenth century english keyboard music as exemplified in the Fitzwilliam virginal book

Digitoitu 29.10 2008.

Development of an instrument to measure the degree of critical patient's satisfaction with nursing care: research protocol

Aim: To investigate and understand patient's satisfaction with nursing care in the intensive care unit to identify the dimensions of the concept of"satisfaction" from the patient's point of view. To design and validate a questionnaire that measures satisfaction levels in critical patients. Background: There are many instruments capable of measuring satisfaction with nursing care; however, they do not address the reality for critical patients nor are they applicable in our context. Design: A dual approach study comprising: a qualitative phase employing Grounded Theory and a quantitative and descriptive phase to prepare and validate the questionnaire. Methods: Data collection in the qualitative phase will consist of: in-depth interview after theoretical sampling, on-site diary and expert discussion group. The sample size will depend on the expected theoretical saturation n = 27-36. Analysis will be based on Grounded Theory. For the quantitative phase, the sampling will be based on convenience (n = 200). A questionnaire will be designed on the basis of qualitative data. Descriptive and inferential statistics will be used. The validation will be developed on the basis of the validity of the content, the criteria of the construct and reliability of the instrument by the Cronbach's alpha and test-retest approach. Approval date for this protocol was November 2010. Discussion: Self-perceptions, beliefs, experiences, demographic, socio-cultural epistemological and political factors are determinants for satisfaction, and these should be taken into account when compiling a questionnaire on satisfaction with nursing care among critical patients.

Evaluating the success of software development projects in Russia, Ukraine, and Belarus

The size and complexity of projects in the software development are growing very fast. At the same time, the proportion of successful projects is still quite low according to the previous research. Although almost every project's team knows main areas of responsibility which would help to finish project on time and on budget, this knowledge is rarely used in practice. So it is important to evaluate the success of existing software development projects and to suggest a method for evaluating success chances which can be used in the software development projects. The main aim of this study is to evaluate the success of projects in the selected geographical region (Russia-Ukraine-Belarus). The second aim is to compare existing models of success prediction and to determine their strengths and weaknesses. Research was done as an empirical study. A survey with structured forms and theme-based interviews were used as the data collection methods. The information gathering was done in two stages. At the first stage, project manager or someone with similar responsibilities answered the questions over Internet. At the second stage, the participant was interviewed; his or her answers were discussed and refined. It made possible to get accurate information about each project and to avoid errors. It was found out that there are many problems in the software development projects. These problems are widely known and were discussed in literature many times. The research showed that most of the projects have problems with schedule, requirements, architecture, quality, and budget. Comparison of two models of success prediction presented that The Standish Group overestimates problems in project. At the same time, McConnell's model can help to identify problems in time and avoid troubles in future. A framework for evaluating success chances in distributed projects was suggested. The framework is similar to The Standish Group model but it was customized for distributed projects.

Suomen Pankin julkaisut

Kokoelmaan kuuluu Suomen Pankin julkaisemaa aineistoa 1870-luvulta lähtien. Kokoelma sisältää vuosikertomuksia, vuosikirjoja, tieteellisiä julkaisuja kuten keskustelualoitteita, työpapereita ja muita tutkimusjulkaisuja, Suomen Pankin ennusteita, selvityksiä, raportteja ja lehtiä. Kokoelmaan kuuluu lisäksi taloudellista kehitystä kuvaavia pitkiä tilastosarjoja, joista osa on erillisiä julkaisuja ja osa on ilmestynyt Suomen Pankin muissa julkaisuissa, kuten vuosikirjoissa tai lehdissä. Tilastoihin kuuluvat mm. maksutase-, valuuttakurssi-, rahoitusmarkkina-, arvopaperi- ja korkotilastot sekä hintatasoa kuvaavat ja rahan määrän kehitystä seuraavat tilastot. Kokoelmaan kuuluu myös Suomen Pankista tehdyt historiikit, joista vanhin on vuodelta 1914. Suomen Pankin julkaisuja löytyy sekä painettuna että elektronisena. Lähes kaikki 1990-luvun puolivälin jälkeen ilmestyneet julkaisut on saatavilla elektronisena Suomen Pankin verkkosivujen kautta. Vanhemmat julkaisut on osittain digitoitu, ja tällä hetkellä elektronisena on saatavilla uudempien julkaisujen lisäksi mm. Suomen Pankin keskustelualoitteet, Bank of Finland (Montly) Bulletin ja Suomen Pankin vuosikirjat. Kokoelmassa on yhteensä n. 4000 nimekettä, ja kokoelma karttuu jatkuvasti. Kokoelman muodostavista julkaisuista n. 13 % on ilmestynyt ennen 1950 lukua ja n. 36 % vuosina 1950–1989. Yli 50 % julkaisuista on 1990- ja 2000-luvuilta. Aineisto on valtaosin suomen- ja englanninkielistä, mutta kokoelmaan kuuluu myös ruotsinkielisiä julkaisuja. Kokoelman painettua osaa säilytetään Suomen Pankin kirjaston tiloissa avokokoelmassa. Kirjasto on avoinna ulkoisille asiakkaille, ja Suomen Pankin julkaisut ovat lainattavissa joitakin poikkeuksia, kuten käsikirjoja, lukuun ottamatta. Julkaisuista voi ottaa kopioita maksutta.

Voyage au Cap-Nord, par la Suède, la Finlande et la Laponie : par Joseph Acerbi. Traduction dʼaprès lʼoriginal anglais, revue sous les yeux de lʼauteur, par Joseph Lavallée. Collection de planches.

Music p. 1-12.

Kansainvälisen valuuttarahaston (IMF) julkaisut

International Monetary Fund (IMF) eli Kansainvälinen valuuttarahasto perustettiin v. 1945 valvomaan 187 jäsenmaansa rahoitusjärjestelmiä ja edistämään rahoitusmarkkinoiden vakautta ja kansainvälistä kauppaa. IMF julkaisee kansainvälisiä maksutasetilastoja n. 200 maasta, ulkomaankaupan tilastotietoa, aikasarjoja v. 1948 lähtien ja valtiontalouden rahoitustilastoja sekä maakohtaisia raportteja. Painettuun kokoelmaan kuuluu vuosikertomuksia, kausijulkaisuja, tilastoja ja monografioita. Ne käsittelevät makrotaloutta, taloudellista kehitystä, rahoitusmarkkinoita, kansainvälistä taloutta ja valuuttamarkkinoita. Kokoelmassa on yhteensä n. 4342 nimekettä ja se karttuu jatkuvasti. Kokoelman vanhin julkaisu on vuodelta 1944. Suurin osa kokoelman julkaisuista on ilmestynyt v. 1995 - 2011. Sitä uudempia ei ole enää hankittu painettuina. Kokoelmaan kuuluu erilaisia vuosikirjoja pitkältä ajanjaksolta, kuten Annual report (1948 -), Annual Report on Exchange Arrangements (1990 -), Balance of payments statistics yearbook (1938 - ), Direction of trade statistics yearbook (1958 - ), Government finance statistics yearbook (1952 - ) ja International financial statistics yearbook (1991 - ). Kokoelma sisältää myös kausijulkaisuja kuten Economic review (1951 - ), IMF staff papers (1951 -) ja International financial statistics (1948 -). Kokoelmaan kuuluvat myös elektronisia julkaisuja sisältävät IMF E-Library ja AREAER -tietokannat. AREAR-tietokannassa on Annual Report on Exchange Arrangements -julkaisut sähköisessä muodossa. Tietokannassa on dataa mm. IMF:n jäsenmaiden valuutta- ja kauppajärjestelyistä. IMF E-Library, sisältää elektronisia julkaisuja sekä tilastotietokannat: International financial statistics (IFS), Balance of payments statistics (BOP), Direction of trade statistics (DOT) ja Government finance statistics (GFS). Julkaisuja on yhteensä n. 11 806. Kokoelman uudempaa osaa säilytetään Suomen Pankin kirjaston avokokoelmassa ja vanhempaa varastokokoelmassa. Painetut julkaisut ovat käytettävissä kirjastossa ja lainattavissa lukuun ottamatta tilastojulkaisuja, kausijulkaisuja ja vuosikirjoja. Elektronisia tietokantoja voi käyttää vain organisaation henkilökunta.

Development of an automated bench top electronic penetrometer

The aim of this study was to develop a an automated bench top electronic penetrometer (ABEP) that allows performing tests with high rate of data acquisition (up to 19,600 Hz) and with variation of the displacement velocity and of the base area of cone penetration. The mechanical components of the ABEP are: a supporting structure, stepper motor, velocity reducer, double nut ball screw and six penetration probes. The electronic components of ABEP are: a "driver" to control rotation and displacement, power supply, three load cells, two software programs for running and storing data, and a data acquisition module. This penetrometer presented in compact size, portable and in 32 validation tests it proved easy to operate, and showed high resolution, high velocity in reliability in data collection. During the validation tests the equipment met the objectives, because the test results showed that the ABEP could use different sizes of cones, allowed work at different velocities, showed for velocity and displacement, were only 1.3% and 0.7%, respectively, at the highest velocity (30 mm s-1) and 1% and 0.9%, respectively for the lowest velocity (0.1 mm s-1).

Development of Cost Estimation with Feedback Information in EPCM Business

Target company of this study is a large machinery company, which is, inter alia, engaged in energy and pulp engineering, procurement and construction management (EPCM) supply business. The main objective of this study was to develop cost estimation of the target company by providing more accurate, reliable and up-to-date information through enterprise resource planning (ERP) system. Another objective was to find cost-effective methods to collect total cost of ownership information to support more informed supplier selection decision making. This study is primarily action-oriented, but also constructive, and it can be divided in two sections: theoretical literature review and empirical study on the abovementioned part of the target company’s business. Development of information collection is, in addition to literature review, based on nearly 30 qualitative interviews of employees at various organizational units, functions and levels at the target company. At the core of development was to make initial data more accurate, reliable and available, a necessary prerequisite for informed use of the information. Certain development suggestions and paths were presented in order to regain confidence in ERP system as information source by reorganizing work breakdown structure and by complementing mere cost information with quantitative, technical and scope information. Several methods to use the information ever more effectively were also discussed. While implementation of the development suggestions outreached the scope of this study, it was forwarded in test environment and interest groups.

Data management as a part of performance management: Case study about production reporting development project

Because of the increased availability of different kind of business intelligence technologies and tools it can be easy to fall in illusion that new technologies will automatically solve the problems of data management and reporting of the company. The management is not only about management of technology but also the management of processes and people. This thesis is focusing more into traditional data management and performance management of production processes which both can be seen as a requirement for long lasting development. Also some of the operative BI solutions are considered in the ideal state of reporting system. The objectives of this study are to examine what requirements effective performance management of production processes have for data management and reporting of the company and to see how they are effecting on the efficiency of it. The research is executed as a theoretical literary research about the subjects and as a qualitative case study about reporting development project of Finnsugar Ltd. The case study is examined through theoretical frameworks and by the active participant observation. To get a better picture about the ideal state of reporting system simple investment calculations are performed. According to the results of the research, requirements for effective performance management of production processes are automation in the collection of data, integration of operative databases, usage of efficient data management technologies like ETL (Extract, Transform, Load) processes, data warehouse (DW) and Online Analytical Processing (OLAP) and efficient management of processes, data and roles.

Social media and public libraries : exploring information activities of library professionals and users

Social media has become a part of many people’s everyday lives. In the library field the adoption of social media has been widespread and discussions of the development of “Library 2.0” began at an early stage. The aim with this thesis is to study the interface between public libraries, social media, and users, focusing on information activities. The main research question is: How is the interface between public libraries and social media perceived and acted upon by its main stakeholders (library professionals and users)? The background of Library 2.0 is strongly associated with the development of the Web and social media, as well as with the public libraries and their user-centered and information technological development. The theoretical framework builds on the research within the area of Library and Information Science concerning information behavior, information practice, and information activities. Earlier research on social media and public libraries is also highlighted in this thesis. The methods survey and content analysis were applied to map the interface between social media and public libraries. A questionnaire was handed out to the users and another questionnaire was sent out to the library professionals. The results were statistically analyzed. In the content analysis public library Facebook pages were studied. All the empirical investigations were conducted in the area of Finland Proper. An integrated analysis of the results deepens the understanding of the key elements of the social media and public library context. These elements are interactivity, information activities, perceptions, and stakeholders. In this context seven information activities were distinguished: reading, seeking, creating, communicating, informing, mediating, and contributing. This thesis contributes to develop the research concerning information activities and draws a realistic picture of the challenges and opportunities in the social media and public library context. It also contributes with knowledge on library professionals and library users, and the existing differences in their perceptions of the interface between libraries and social media.

The contributions of netnography in new product development

Netnography has been studying in various aspects (e.g. definitions of netnography, application of netngoraphy, conducting procedure…) within different industrial contexts. Besides, there are many studies and researches about new product development in various perspectives, such as new product development models, management of new product development project, or interaction between customers and new product design, and so on. However, the connection and the interaction between netnography and new product development have not been studied recently. This opens opportunities for the writer to study and explore unrevealed issues regarding to applying netnography in new product development. In term of the relation between netnography and new product development, there are numerous of matters need to be explored; for instance, the process of applying netnography in order to benefit to new product development, the involvement degree of netnography in new product development process, or eliminating useless information from netnography so that only crucial data is utilized, and so on. In this thesis, writer focuses on exploring how netnography is applied in new product development process, and what benefits netnography can contribute to the succeed of the project. The aims of this study are to understand how netnography is conducted for new product development purpose, and to analyse the contributions of netnography in the new product development process. To do so, a case-study strategy will be conducted with triple case studies. The case studies are chosen bases on many different criteria in order to select the most relevant cases. Eventually, the writer selected three case studies, which are Sunless tanning product project (HYVE), Listerine (NetBase), and Nivea co-creation and netnography in black and white deodorant. The case study strategy applied in this thesis includes four steps e.g. case selection, data collection, case study analysis, and generating the research outcomes from the analysis. This study of the contributions of netnography in the new product development process may be useful for the readers in many ways. It offers the fundamental knowledge of netnography market research method and basic understanding of new product development process. Additionally, it emphasizes the differences between netnography and other market research methods in order to explain the reasons why many companies and market research agents recently utilized netnography in their market research projects. Furthermore, it highlights the contributions of netnography in the new product development process in order to indicate the importance of netnography in developing new product. Thus, the potential readers of the study can be students, marketers, researchers, product developers, or business managers.

Challenges in managing large-scale agile software development transformation

Adapting and scaling up agile concepts, which are characterized by iterative, self-directed, customer value focused methods, may not be a simple endeavor. This thesis concentrates on studying challenges in a large-scale agile software development transformation in order to enhance understanding and bring insight into the underlying factors for such emerging challenges. This topic is approached through understanding the concepts of agility and different methods compared to traditional plan-driven processes, complex adaptive theory and the impact of organizational culture on agile transformational efforts. The empirical part was conducted by a qualitative case study approach. The internationally operating software development case organization had a year of experience of an agile transformation effort during it had also undergone organizational realignment efforts. The primary data collection was conducted through semi-structured interviews supported by participatory observation. As a result the identified challenges were categorized under four broad themes: organizational, management, team dynamics and process related. The identified challenges indicate that agility is a multifaceted concept. Agile practices may bring visibility in issues of which many are embedded in the organizational culture or in the management style. Viewing software development as a complex adaptive system could facilitate understanding of the underpinning philosophy and eventually solving the issues: interactions are more important than processes and solving a complex problem, such a novel software development, requires constant feedback and adaptation to changing requirements. Furthermore, an agile implementation seems to be unique in nature, and agents engaged in the interaction are the pivotal part of the success of achieving agility. In case agility is not a strategic choice for whole organization, it seems additional issues may arise due to different ways of working in different parts of an organization. Lastly, detailed suggestions to mitigate the challenges of the case organization are provided.

Integrating Student Learning into the Repository Ecosystem

Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014