Assessing the application of polypropylene multifilament yarns in brain phantoms

The currently available clinical imaging methods do not provide highly detailed information about location and severity of axonal injury or the expected recovery time of patients with traumatic brain injury [1]. High-Definition Fiber Tractography (HDFT) is a novel imaging modality that allows visualizing and quantifying, directly, the degree of axons damage, predicting functional deficits due to traumatic axonal injury and loss of cortical projections. This imaging modality is based on diffusion technology [2]. The inexistence of a phantom able to mimic properly the human brain hinders the possibility of testing, calibrating and validating these medical imaging techniques. Most research done in this area fails in key points, such as the size limit reproduced of the brain fibers and the quick and easy reproducibility of phantoms [3]. For that reason, it is necessary to develop similar structures matching the micron scale of axon tubes. Flexible textiles can play an important role since they allow producing controlled packing densities and crossing structures that match closely the human crossing patterns of the brain. To build a brain phantom, several parameters must be taken into account in what concerns to the materials selection, like hydrophobicity, density and fiber diameter, since these factors influence directly the values of fractional anisotropy. Fiber cross-section shape is other important parameter. Earlier studies showed that synthetic fibrous materials are a good choice for building a brain phantom [4]. The present work is integrated in a broader project that aims to develop a brain phantom made by fibrous materials to validate and calibrate HDFT. Due to the similarity between thousands of hollow multifilaments in a fibrous arrangement, like a yarn, and the axons, low twist polypropylene multifilament yarns were selected for this development. In this sense, extruded hollow filaments were analysed in scanning electron microscope to characterize their main dimensions and shape. In order to approximate the dimensional scale to human axons, five types of polypropylene yarns with different linear density (denier) were used, aiming to understand the effect of linear density on the filament inner and outer areas. Moreover, in order to achieve the required dimensions, the polypropylene filaments cross-section was diminished in a drawing stage of a filament extrusion line. Subsequently, tensile tests were performed to characterize the mechanical behaviour of hollow filaments and to evaluate the differences between stretched and non-stretched filaments. In general, an increase of the linear density causes the increase in the size of the filament cross section. With the increase of structure orientation of filaments, induced by stretching, breaking tenacity increases and elongation at break decreases. The production of hollow fibers, with the required characteristics, is one of the key steps to create a brain phantom that properly mimics the human brain that may be used for the validation and calibration of HDFT, an imaging approach that is expected to contribute significantly to the areas of brain related research.

Structural analysis of the masonry envelope of Ica Cathedral, Peru

Dissertação de mestrado em Structural Analysis of Monuments and Historical Constructions

Evolving hallmarks in urothelial bladder cancer: unveiling potential biomarkers

Urothelial bladder carcinoma (UBC), the most frequent type (90%) of bladder cancer and the second most common malignancy of the urogenital region, is a relatively well understood type of cancer, with numerous studies concerning pathogenetic pathways, natural history and bladder tumor biology being reported. Despite this, it continues to remain a challenge in the oncology field, mostly due to its relapsing and progressive nature, and to the heterogeneity in the response to cisplatin-containing regimens. Although the formulae based on clinical staging and histopathological parameters are classically used as diagnostic and prognostic tools, they have proven insufficient to characterize the individual biological features and clinical behaviour of the tumours. Understanding the pathobiology of the disease can add important information to these classical criteria, and contribute to accurately predict outcome and individualize therapy for UBC patients. In this line of investigation, we found that tumour angiogenesis and lymphangiogenesis, the process of invasion and metastasis and the energy metabolism reprogramming/tumour microenvironment encompass several potential biomarkers that seem to infl bladder cancer aggressiveness and chemoresistance. We particularly highlight the roles of lymphovascular invasion, and of RKIP, CD147 and MCT1 immunoexpressions, as relevant prognostic and/or predictive biomarkers, and as promising areas of therapeutic intervention, eliciting for the development of additional studies that can validate and further explore these biomarkers.

Biological behaviour of thin films consisting of Au nanoparticles dispersed in a TiO2 dielectric matrix

In this work it was studied the possible use of thin films, composed of Au nanoparticles (NPs) embedded in a TiO2 matrix, in biological applications, by evaluating their interaction with a well-known protein, Bovine Serum Albumin (BSA), as well as with microbial cells (Candida albicans). The films were produced by one-step reactive DC magnetron sputtering followed by heat-treatment. The samples revealed a composition of 8.3 at.% of Au and a stoichiometric TiO2 matrix. The annealing promoted grain size increase of the Au NPs from 3 nm (at 300 °C) to 7 nm (at 500 °C) and a progressive crystallization of the TiO2 matrix to anatase. A broad localized surface plasmon resonance (LSPR) absorption band (λ = 580–720 nm) was clearly observed in the sample annealed at 500 °C, being less intense at 300 °C. The biological tests indicated that the BSA adhesion is dependent on surface nanostructure morphology, which in turn depends on the annealing temperature that changed the roughness and wettability of the films. The Au:TiO2 thin films also induced a significant change of the microbial cell membrane integrity, and ultimately the cell viability, which in turn affected the adhesion on its surface. The microstructural changes (structure, grain size and surface morphology) of the Au:TiO2 films promoted by heat-treatment shaped the amount of BSA adhered and affected cell viability.

Experimental and numerical studies of hybrid PCM embedded in plastering mortar for enhanced thermal behaviour of buildings

This paper proposes a methodology for improvement of energy efficiency in buildings through the innovative simultaneous incorporation of three distinct phase change materials (here termed as hybrid PCM) in plastering mortars for façade walls. The thermal performance of a hybrid PCM mortar was experimentally evaluated by comparing the behaviour of a prototype test cell (including hybrid PCM plastering mortar) subjected to realistic daily temperature profiles, with the behaviour of a similar prototype test cell, in which no PCM was added. A numerical simulation model was employed (using ANSYS-FLUENT) to validate the capacity of simulating temperature evolution within the prototype containing hybrid PCM, as well as to understand the contribution of hybrid PCM to energy efficiency. Incorporation of hybrid PCM into plastering mortars was found to have the potential to significantly reduce heating/cooling temperature demands for maintaining the interior temperature within comfort levels when compared to normal mortars (without PCM), or even mortars comprising a single type of PCM.

Implementação de um sistema de customer relationship management na broaden information solutions

Dissertação de mestrado em Sistemas de Informação

Tradição em continuidade: monitorização das estratégias bioclimáticas das Quintas no Nordeste Transmontano

In recent decades the vernacular architecture has been recognized as an important source of knowledge in the adaptation of construction to the climate and other specific local characteristics. However, the systematized information is still scarce to quantitatively understand the hydrothermal behaviour of bioclimatic strategies identified in previous surveys to this type of architecture. Using the farmsteads in the northeast region of Portugal as a case study, this article presents the results of hygrothermal monitoring carried out during the heating and cooling seasons. The data obtained enabled to verify and quantify the effective performance of the identified bioclimatic strategies, which are presented as opportunities for contemporary architecture.

A integração de técnicas BIM (Building Information Modeling) no projeto e na construção de estruturas de madeira

Dissertação de mestrado integrado em Engenharia Civil

“PhenoWorld”: a new multidimensional strategy for studying behaviour in rodents

Tese de Doutoramento em Ciências da Saúde

Cardio-respiratory symptoms in panic disorder: a contribution from cognitive-behaviour therapy

Objective: To compare patients with panic disorder with agoraphobia treated with cognitive-behavioural therapy (CBT) associated with the medication with patients treated only with medication and verify the behaviour of the cardio-respiratory symptoms of both groups. Methods: Randomized sample in the Psychiatry Institute of the Federal University of Rio de Janeiro, divided in two groups of 25 participants each. Group 1 undertook 10 weekly sessions of CBT with one hour of duration each together with medication. Group 2, Control, were administered medication that only consisted of tricyclic anti-depressants and selective inhibitors of the re-uptake of serotonin. Evaluation instruments were applied at the beginning and to the end of the interventions. Results: According to the applied scales, group 1 showed statistically more significant results than group 2, with: reduction of panic attacks, cardio-respiratory symptoms, anticipatory anxiety, agoraphobia avoidance and fear of bodily sensations. Conclusion: Exposures (in vivo and interoceptive), especially for induction symptom exercises and relaxation, were considered essential to prepare patients with panic disorder to handle future cardio-respiratory symptoms and panic attacks with agoraphobia.

Adaptação transcultural da escala Locus of Control of Behaviour para o português: versão para idosos

Objetivo Apresentar a adaptação transcultural da escala Locus of Control of Behavior (LCB) para a língua portuguesa falada no Brasil. Métodos O processo de adaptação foi realizado em cinco etapas: tradução, retradução, avaliação da equivalência entre a retradução e a escala original, elaboração de uma versão pré-teste e aplicação na população-alvo composta por 16 idosos (56 a 80 anos), com quatro anos mínimos de escolaridade. Resultados A versão adaptada não gerou problemas de compreensão, aceitabilidade ou impacto emocional negativo. Conclusão Este trabalho torna disponível a primeira versão em Português da LCB, uma escala que tem sido particularmente utilizada para avaliar o tipo de locus de controle (LoC) no que concerne ao prognóstico de tratamentos em saúde mental.

A integração do Building Information Modeling (BIM) num projeto de reabilitação

Dissertação de mestrado integrado em Engenharia Civil

Vidas congeladas: socializados para o trabalho, formados para o não emprego?

Dissertação de mestrado em Sociologia (área de especialização em Organizações e Trabalho)

O livro na revista: como revistas semanais brasileiras e portuguesas abordam livros e literatura

Dissertação de mestrado em Comunicação, Arte e Cultura

Effective stiffness behaviour of sandwich beams under uncoupled bending and torsion loadings

Sandwich geometries, mainly in the form of panels and beams, are commonly applied in various transportation industries, such as aerospace, aeronautic and automotive. Sandwich geometries represent important advantages in structural applications, namely high specific stiffness, low weight, and possibility of design optimization prior to manufacturing. The aim of this paper is to uncover the influence of the number of reinforcements (ribs), and of the thickness on the mechanical behavior of all-metal sandwich panels subjected to uncoupled bending and torsion loadings. In this study, four geometries are compared. The orientation of the reinforcements and the effect of transversal ribs are also considered in this study. It is shown that the all the relations are non-linear, despite the elastic nature of the analysis in the Finite Element software ANSYS MECHANICAL APDL.