Comparing professional identities, attitudes, and views in public communication : a study of Chilean journalists and public relations practitioners

Public relations (PR) practitioners’ and journalists’ professional views and attitudes toward each other have been a subject of academic inquiry during the past decades; however, much of this research has focused on Europe and North America. In other regions of the world, for example in Latin America, historical developments and social understandings have led to slightly different conceptualizations of PR and journalism. Using Chile as a case study, this paper reports the results of an examination of Chilean journalists’ and PR practitioners’ professional conceptions. While both groups tend to have somewhat similar views of media relations and see themselves as part of the same profession, there are also important differences which are most likely based on professional socialization processes rather than educational backgrounds or sociodemographic and work related variables. Implications for contextually grounded approaches to the study of PR and journalism are highlighted.

Travel journalists’ attitudes toward public relations : findings from a representative survey

The impact of public relations on emerging fields such as travel journalism has not gained much attention, despite the broader growth of lifestyle journalism, and its particular dependence on PR. This study reports the findings of a representative survey of Australian travel journalists, focusing on their views of PR. Results show that travel journalists are wary of PR, although they believe they can be relatively immune from its influence and see some PR activities as quite useful. Cluster analysis identifies three distinct groups based on their views of PR, which range from a positive attitude to strong criticism. Their backgrounds and differences are explored, pointing to gender, job status, and background in mainstream journalism as main determinants for differences.

New security notions and relations for public-key encryption

Since their introduction, the notions of indistinguishability and non-malleability have been changed and extended by different authors to support different goals. In this paper, we propose new flavors of these notions, investigate their relative strengths with respect to previous notions, and provide the full picture of relationships (i.e., implications and separations) among the security notions for public-key encryption schemes. We take into account the two general security goals of indistinguishability and non-malleability, each in the message space, key space, and hybrid message-key space to find six specific goals, a couple of them, namely complete indistinguishability and key non-malleability, are new. Then for each pair of goals, coming from the indistinguishability or non-malleability classes, we prove either an implication or a separation, completing the full picture of relationships among all these security notions. The implications and separations are respectively supported by formal proofs (i.e., reductions) in the concrete-security framework and by counterexamples.

Friends or followers? The relations between German soccer clubs and their fans on Twitter

This paper shows how soccer clubs from Germany’s first division have started to use Twitter. Analysis is based on tweets from and to club accounts as well as on follower numbers, and specific clubs are selected for case studies. This approach reveals that Twitter mirrors the conflicts between professional sports and traditional fandom.

Modelling NPO-government relations : Australian case studies

Non-profit organizations (NPOs) are major providers of services in many fields of endeavour, and often receive financial support from government. This article investigates different forms of government/nonprofit funding relationships, with the viewpoint being mainly, though not exclusively, from the perspective of the non-profit agencies. While there are a number of existing typologies of government/NPO relations, these are dated and in need of further empirical analysis and testing. The article advances an empirically derived extension to current models of government/NPO relations. A future research agenda is outlined based on the constructs that underpin typologies, rather than discrete categorization of relationships.

Provotypes: Teasing out tensions between industrial context and use context

What industrial organisations think people do and what they actually do are often two very different things. But exactly this tension can be a source of innovation: how can we give form to insights about what people do, to deliberately challenge industries' conceptions, and inspire new product and service development

Ethnography of software maintenance activities in an industrial engineering setup

New technical and procedural interventions are less likely to be adopted in industry, unless they are smoothly integrated into the existing practices of professionals. In this paper, we provide a case study of the use of ethnographic methods for studying software bug-fixing activities at an industrial engineering conglomerate. We aimed at getting an in-depth understanding of software developers' everyday practices in bug-fixing related projects and in turn inform the design of novel productivity tools. The use of ethnography has allowed us to look at the social side of software maintenance practices. In this paper, we highlight: 1) organizational issues that influence bug-fixing activities; 2) social role of bug tracking systems, and; 3) social issues specific to different phases of bug-fixing activities.

On the relations and differences between Popper dimension, exclusion dimension and VC-Dimension

A high-level relationPopper dimension—( Exclusion dimension—( VC dimension—( between Karl Popper’s ideas on “falsifiability of scientific theories” and the notion of “overfitting”Overfitting in statistical learning theory can be easily traced. However, it was pointed out that at the level of technical details the two concepts are significantly different. One possible explanation that we suggest is that the process of falsification is an active process, whereas statistical learning theory is mainly concerned with supervised learningSupervised learning, which is a passive process of learning from examples arriving from a stationary distribution. We show that concepts that are closer (although still distant) to Karl Popper’s definitions of falsifiability can be found in the domain of learning using membership queries, and derive relations between Popper’s dimension, exclusion dimension, and the VC-dimensionVC dimension.

Numerical investigation of mechanical and thermal dynamic properties of the industrial transformer

Industrial transformer is one of the most critical assets in the power and heavy industry. Failures of transformers can cause enormous losses. The poor joints of the electrical circuit on transformers can cause overheating and results in stress concentration on the structure which is the major cause of catastrophic failure. Few researches have been focused on the mechanical properties of industrial transformers under overheating thermal conditions. In this paper, both mechanical and thermal properties of industrial transformers are jointly investigated using Finite Element Analysis (FEA). Dynamic response analysis is conducted on a modified transformer FEA model, and the computational results are compared with experimental results from literature to validate this simulation model. Based on the FEA model, thermal stress is calculated under different temperature conditions. These analysis results can provide insights to the understanding of the failure of transformers due to overheating, therefore are significant to assess winding fault, especially to the manufacturing and maintenance of large transformers.

Leader-follower interactions : relations with OCB and sales productivity

Purpose Based on substitutes for leadership theory, the aim of this study is to examine followers' learning goal orientation as a moderator of relationships among transformational leadership, organizational citizenship behavior (OCB) and sales productivity. Design/methodology/approach Data came from 61 food and beverage attendants of a casino, and were analyzed using regression analyses. Findings Transformational leadership was positively related to both OCB and sales productivity. Learning goal orientation moderated the relationship between transformational leadership and OCB, such that transformational leadership was more strongly related to OCB among followers with a low learning goal orientation than among followers with a high learning goal orientation. Research limitations/implications Limitations of the study include the small sample size and cross-sectional research design. Practical implications Organizations could train supervisors to practice a transformational leadership style and to take followers' learning goal orientation into account. Originality/value The findings of this study suggest that, with regard to OCB, a high learning goal orientation of followers may act as a “substitute” for low levels of leaders' transformational leadership.

Invisible connections : investigating older people's emotions and social relations around objects

The advent of the Internet of Things creates an interest in how people might interrelate through and with networks of internet enabled objects. With an emphasis on fostering social connection and physical activity among older people, this preliminary study investigated objects that people over the age of 65 years viewed as significant to them. We conducted contextual interviews in people's homes about their significant objects in order to understand the role of the objects in their lives, the extent to which they fostered emotional and social connections and physical activity, and how they might be augmented through internet connection. Discussion of significant objects generated considerable emotion in the participants. We identified objects of comfort and routine, objects that exhibited status, those that fostered independence and connection, and those that symbolized relationships with loved ones. These findings lead us to consider implications for the design of interconnected objects.

Preventing industrial scale using bauxite refinery residues

An Australian green power (AGP) company produces energy from burning biomass from the sugar industry and recycled wood waste, however alkali in biomass is released into a recirculating stream that forms a scale as it becomes more concentrated. This investigation has shown that the addition of Bayer liquor (alumina waste residue) successfully removes scale-forming species from the recirculating stream and thus has the potential to reduce the rate of scaling. Characterisation of the scale and Bayer precipitates has been performed using X-ray diffraction (XRD), infrared spectroscopy (IR) and inductively coupled plasma optical emission spectroscopy (ICP-OES).

Pragmatic two-way communication : a practitioner perspective on dialogue in public relations

Public relations has traditionally claimed a close association with dialogue, but this research demonstrates that formal notions of dialogue have little relevance to the real world of public relations practice. Instead, practitioners undertake pragmatic forms of two-way communication, because the constraints within which they work mean dialogue is difficult if not impossible to carry out. This qualitative research project shows that although the label of 'dialogue' has been co-opted in both the theory and practice of public relations, this claimed connection is not supported by empirical evidence.

Embedded creatives in the Australian manufacturing industry

According to 2011 Australian Census figures, embedded creative employees (creative employees not working in the core Creative Industries) make up 2 per cent (or a total of 17 635) of manufacturing industry employees. The average for all industries is 1.6 per cent. In the 2011–2012 financial year the manufacturing industry formed 7.3 per cent of Australia’s gross domestic product (GDP), contributing approximately AU$106.5 billion to the economy (Department of Industry, Innovation, Science, Research and Tertiary Education 2013). Manufacturing is central to innovation, accounting for over one-quarter of all business expenditure in R&D in 2010–2011, representing around AU$4.8 billion invested in R&D (ibid.). Facing challenges such as sustainability concerns, ever-increasing offshore production and the global financial crisis, the Australian manufacturing industry needs to remain relevant and competitive to succeed. Innovation is one way to do this. Given the contribution of the manufacturing industry to the Australian economy, and the above-average portion of embedded creatives in manufacturing, it is important to consider what exactly embedded creatives add to the industry. This chapter, inspired by the Getting Creative in Healthcare report (Pagan, Higgs and Cunningham 2008), examines the contribution of embedded creatives to innovation in the manufacturing industry via case studies and supplemental data.

Happy talk? Toward understanding the significance of dialogue to the practice of public relations

The significance of dialogue to public relations is a persistent and widespread theme in both industry and the academy (International Communication Association, 2013). Dialogue is integral to a number of theoretical perspectives in public relations, from the instrumentalist/functionalist through to the rise of the influence of the two-way symmetric model (Grunig & Hunt, 1984). The emergence of the relational perspective – with its emphasis on dialogue as a means of achieving mutually-beneficial relationships between organisations and stakeholders – brought attention to dialogue as a discrete concept (see, for example, Ledingham, 2003; and 2006). Dialogue continues to be an implicit element in the development of new perspectives on public relations, such as Holtzhausen and Voto’s (2002) postmodern approach...