Design and implementation of generalized topologies of time-interleaved variable bandpass Σ−Δ modulators

In this thesis, novel analog-to-digital and digital-to-analog generalized time-interleaved variable bandpass sigma-delta modulators are designed, analysed, evaluated and implemented that are suitable for high performance data conversion for a broad-spectrum of applications. These generalized time-interleaved variable bandpass sigma-delta modulators can perform noise-shaping for any centre frequency from DC to Nyquist. The proposed topologies are well-suited for Butterworth, Chebyshev, inverse-Chebyshev and elliptical filters, where designers have the flexibility of specifying the centre frequency, bandwidth as well as the passband and stopband attenuation parameters. The application of the time-interleaving approach, in combination with these bandpass loop-filters, not only overcomes the limitations that are associated with conventional and mid-band resonator-based bandpass sigma-delta modulators, but also offers an elegant means to increase the conversion bandwidth, thereby relaxing the need to use faster or higher-order sigma-delta modulators. A step-by-step design technique has been developed for the design of time-interleaved variable bandpass sigma-delta modulators. Using this technique, an assortment of lower- and higher-order single- and multi-path generalized A/D variable bandpass sigma-delta modulators were designed, evaluated and compared in terms of their signal-to-noise ratios, hardware complexity, stability, tonality and sensitivity for ideal and non-ideal topologies. Extensive behavioural-level simulations verified that one of the proposed topologies not only used fewer coefficients but also exhibited greater robustness to non-idealties. Furthermore, second-, fourth- and sixth-order single- and multi-path digital variable bandpass digital sigma-delta modulators are designed using this technique. The mathematical modelling and evaluation of tones caused by the finite wordlengths of these digital multi-path sigmadelta modulators, when excited by sinusoidal input signals, are also derived from first principles and verified using simulation and experimental results. The fourth-order digital variable-band sigma-delta modulator topologies are implemented in VHDL and synthesized on Xilinx® SpartanTM-3 Development Kit using fixed-point arithmetic. Circuit outputs were taken via RS232 connection provided on the FPGA board and evaluated using MATLAB routines developed by the author. These routines included the decimation process as well. The experiments undertaken by the author further validated the design methodology presented in the work. In addition, a novel tunable and reconfigurable second-order variable bandpass sigma-delta modulator has been designed and evaluated at the behavioural-level. This topology offers a flexible set of choices for designers and can operate either in single- or dual-mode enabling multi-band implementations on a single digital variable bandpass sigma-delta modulator. This work is also supported by a novel user-friendly design and evaluation tool that has been developed in MATLAB/Simulink that can speed-up the design, evaluation and comparison of analog and digital single-stage and time-interleaved variable bandpass sigma-delta modulators. This tool enables the user to specify the conversion type, topology, loop-filter type, path number and oversampling ratio.

Children’s access to beneficial information in Arab states: Implementation of Article 17 of the Convention on the Rights of the Child in Egypt, Morocco and the United Arab Emirates

In theory, the multiple platforms and transnational nature of digital media, along with a related proliferation of diverse forms of content, make it easier for children’s right to access socially and culturally beneficial information and material to be realised, as required by Article 17 of the UN Convention on the Rights of the Child (CRC). Drawing on data collected during research on children’s screen content in the Arab world, combined with scrutiny of documents collated by the Committee on the Rights of the Child, which monitors compliance with the CRC, this paper explores how three Arab countries, Egypt, Morocco and the United Arab Emirates, presented their efforts to implement Article 17 as part of their periodic reporting on their overall performance in putting the CRC into effect. It uncovers tensions over the relationship between provision, participation and protection in relation to media, reveals that Article 17 is liable to get less attention than it deserves in contexts where governments keep a tight grip on media, and that, by appearing to give it a lower priority, all parties neglect the intersection between human rights in relation to media and children’s rights.

An implementation architecture for scenario-based simulations

The past years have witnessed an increased use of applied games for developing and evaluating communication skills. These skills benefit from in-terpersonal interactions. Providing feedback to students practicing communica-tion skills is difficult in a traditional class setting with one teacher and many students. This logistic challenge may be partly overcome by providing training using a simulation in which a student practices with communication scenarios. A scenario is a description of a series of interactions, where at each step the player is faced with a choice. We have developed a scenario editor that enables teachers to develop scenarios for practicing communication skills. A teacher can develop a scenario without knowledge of the implementation. This paper presents the implementation architecture for such a scenario-based simulation.

What's in it for us? A case study research about micro sense making processes through the eyes of front line employees, during culture change implementation

Abstract How employees make sense of change is a very complex process. Recently, academics have neglected to research sense making activities in a micro culture implementation context, through the eyes of front line employees. In contrast to a macro view, a micro perspective limits researchers to only look at an individual, departmental or group level. By doing so, we can zoom in on the details of sense making processes that employees use in their daily work life. A macro (organisational) view is based on the notion that there is a general integrated culture that can be found in all organisational units and departments. It is assumed that culture can be researched by using the entire organisation as one single research entity. This thesis challenges this assumption. In case of planned change it is usually the management community who are in charge of the change intervention. Because of their formal hierarchical position, they have the power to abort or initiate change programs. It is perhaps therefore that researchers tend to be focused on the management community rather than on lower level organisational members, such as front line employees. Apart from the micro view, scholars also neglected to research culture change implementation through the eyes of front line employees. This thesis is an attempt to fill these two gaps that currently exists in academic change management publications. The main research question is therefore: From a micro point of view how do front-line employees make sense of the impact of culture change, during the implementation phase? This thesis starts with a literature review which exposes the two main gaps. The most important outcome of this review is that only 2% of the research articles dealt with culture implementation, through the eyes of front line employees. A conceptual research model is built on the integrated sense making theory of Weber and Manning (2001) and the micro variables of Raelin and Cataldo (2011). These theories emphasize elements of sense making in a daily working context. It is likely that front line employees can identify themselves with research elements such as tasks, skills practices, involvement and behaviour. Front line employees were selected, because as lower level organisational members they are usually the change recipients. They are further away from the change initiating scene (usually the management of an organisation) and form a potential sense making ‘hotspot’ that could provide new academic insights. In order to carry out the primary research, two case organisations were selected in the leisure industry. A participative case study research method was chosen. This meant that the researcher worked in the concerning departments of the case organisations. The goal was to observe and interview front line employees, while they were performing their jobs. The most important advantage of this approach is that the researcher temporarily becomes one with the organisation and is therefore able to acquire both formal and informal narratives that front line employees use during sense making activities. It was found that front line employees make sense of organisational change by using a practical approach. They make sense of the change program by carrying out new tasks, developing new skills and sharing best practices. The most noticeable conclusion was that sense making activities predominantly take place at an individual level in relation to change acceptance. Organisational members tend to create a mental equation in order to weigh the advantages against the disadvantages. They evaluate whether the concerning change program is beneficial to them or not. For future research a sense making scheme model is suggested that is based on two methods: an introspection and an action method.

VLSI design and implementation of 2-D Inverse Discrete Wavelet Transform

This paper proposes a JPEG-2000 compliant architecture capable of computing the 2 -D Inverse Discrete Wavelet Transform. The proposed architecture uses a single processor and a row-based schedule to minimize control and routing complexity and to ensure that processor utilization is kept at 100%. The design incorporates the handling of borders through the use of symmetric extension. The architecture has been implemented on the Xilinx Virtex2 FPGA.

An investigation of routes to cancer diagnosis in 10 international jurisdictions, as part of the International Cancer Benchmarking Partnership: survey development and implementation

Objectives This paper describes the methods used in the International Cancer Benchmarking Partnership Module 4 Survey (ICBPM4) which examines time intervals and routes to cancer diagnosis in 10 jurisdictions. We present the study design with defining and measuring time intervals, identifying patients with cancer, questionnaire development, data management and analyses.
Design and setting Recruitment of participants to the ICBPM4 survey is based on cancer registries in each jurisdiction. Questionnaires draw on previous instruments and have been through a process of cognitive testing and piloting in three jurisdictions followed by standardised translation and adaptation. Data analysis focuses on comparing differences in time intervals and routes to diagnosis in the jurisdictions.
Participants Our target is 200 patients with symptomatic breast, lung, colorectal and ovarian cancer in each jurisdiction. Patients are approached directly or via their primary care physician (PCP). Patients’ PCPs and cancer treatment specialists (CTSs) are surveyed, and ‘data rules’ are applied to combine and reconcile conflicting information. Where CTS information is unavailable, audit information is sought from treatment records and databases.
Main outcomes Reliability testing of the patient questionnaire showed that agreement was complete (κ=1) in four items and substantial (κ=0.8, 95% CI 0.333 to 1) in one item. The identification of eligible patients is sufficient to meet the targets for breast, lung and colorectal cancer. Initial patient and PCP survey response rates from the UK and Sweden are comparable with similar published surveys. Data collection was completed in early 2016 for all cancer types.
Conclusion An international questionnaire-based survey of patients with cancer, PCPs and CTSs has been developed and launched in 10 jurisdictions. ICBPM4 will help to further understand international differences in cancer survival by comparing time intervals and routes to cancer diagnosis.

Implementation of Content Centric Networks Through Domain Name System

Content Centric Network (CCN) is a proposed future internet architecture that is based on the concept of contents name instead of the hosts name followed in the traditional internet architecture. CCN architecture might do changes in the existing internet architecture or might replace it completely. In this paper, we present modifications to the existing Domain Name System (DNS) based on the CCN architecture requirements without changing the existing routing architecture. Hence the proposed solution achieves the benefits of both CCN and existing network infrastructure (i.e. content based routing, independent of host location, caching and content delivery protocols).

Effect of implementation of a preconception counselling resource for women with diabetes: A population based study

Aim To evaluate the effect of regional implementation of a preconception counselling resource into routine diabetes care on pregnancy planning indicators. Methods A preconception counselling DVD was distributed to women by diabetes care teams and general practices. Subsequently, in a prospective population-based study, pregnancy planning indicators were evaluated. The post-DVD cohort (n = 135), including a viewed-DVD subgroup (n = 58), were compared with an historical cohort (pre-DVD, n = 114). Primary outcome was HbA1c at first diabetes-antenatal visit. Secondary outcomes included preconception folic acid consumption, planned pregnancy and HbA1c recorded in the 6 months preconception. Results Mean first visit HbA1c was lower post-DVD vs. pre-DVD: 7.5% vs. 7.8% [58.4 vs. 61.8 mmol/mol]; p = 0.12), although not statistically significant. 53% and 20% of women with type 1 and 2 diabetes, respectively, viewed the DVD. The viewed-DVD subgroup were significantly more likely to have lower first visit HbA1c: 6.9% vs. 7.8% [52.1 vs. 61.8 mmol/mol], P < 0.001; planned pregnancy (88% vs. 59%, P < 0.001); taken folic acid preconception (81% vs. 43%, P = 0.001); and had HbA1c recorded preconception (88% vs. 53%, P < 0.001) than the pre-DVD cohort. Conclusions Implementation of a preconception counselling resource was associated with improved pregnancy planning indicators. Women with type 2 diabetes are difficult to reach. Greater awareness within primary care of the importance of preconception counselling among this population is needed.

Implementation of a drive-by monitoring system for transport infrastructure utilising GNSS

Ageing and deterioration of infrastructure is a challenge facing transport authorities. In particular, there is a need for increased bridge monitoring in order to provide adequate maintenance, prioritise allocation of funds and guarantee acceptable levels of transport safety. Existing bridge structural health monitoring (SHM) techniques typically involve direct instrumentation of the bridge with sensors and equipment for the measurement of properties such as frequencies of vibration. These techniques are important as they can indicate the deterioration of the bridge condition. However, they can be labour intensive and expensive due to the requirement for on-site installations. In recent years, alternative low-cost indirect vibrationbased SHM approaches have been proposed which utilise the dynamic response of a vehicle to carry out “drive-by” pavement and/or bridge monitoring. The vehicle is fitted with sensors on its axles thus reducing the need for on-site installations. This paper investigates the use of low-cost sensors incorporating global navigation satellite systems (GNSS) for implementation of the drive-by system in practice, via field trials with an instrumented vehicle. The potential of smartphone technology to be harnessed for drive by monitoring is established, while smartphone GNSS tracking applications are found to compare favourably in terms of accuracy, cost and ease of use to professional GNSS devices.

Design and Implementation of a Low Cost Virtual Rugby Decision Making Interactive

The paper describes the design and implementation of a novel low cost virtual rugby decision making interactive for use in a visitor centre. Original laboratory-based experimental work in decision making in rugby, using a virtual reality headset [1] is adapted for use in a public visitor centre, with consideration given to usability, costs, practicality and health and safety. Movement of professional rugby players was captured and animated within a virtually recreated stadium. Users then interact with these virtual representations via use of a lowcost sensor (Microsoft Kinect) to attempt to block them. Retaining the principles of perception and action, egocentric viewpoint, immersion, sense of presence, representative design and game design the system delivers an engaging and effective interactive to illustrate the underlying scientific principles of deceptive movement. User testing highlighted the need for usability, system robustness, fair and accurate scoring, appropriate level of difficulty and enjoyment.

Erweiterung des Dokumentenservers DSpace: Internationalisierung und Implementation des URN-Systems zur permanenten Dokumentenadressierung

At first a small overview is given about the disposition of document ser- vers in the scientific publication process. Then, institutional repositories are introduced by their key features and the benefits of establishing them as a central repository in the university context. A specific solution was chosen on behalf of the requirements of the Uni- versity Library of Kassel, Germany. The software Dspace was chosen but needs to be extended by • internationalization • use of the urn:nbn scheme as persisten identifier. DSpace’s features are shortly described, followed by the process of rever- se engeneering to achieve requirements needed for the implementation of the missing functionality. Adjacent tasks implement the needed featu- res using SUN’s Standard Tag Library for internationalization and some modifications in two classes for use of the urn:nbn scheme as persistent identifier. At the end, a short view on the future of institutional repositories is taken, furthermore some local long-term objectives on DSpace are dis- cussed.

The international evidence on the prevention of drug and alcohol use Summary and examples of implementation in England

The United Nations Office of Drug Control (UNODC) published ‘International Standards on Drug Use Prevention’ in 2013. The Standards were developed through a systematic assessment of the international evidence on prevention and they provide a summary of the available scientific evidence. The briefing provides a summary of the UNODC prevention standards and gives corresponding examples of relevant UK guidelines,programmes and interventions currently available in England. Its aim is to help people who commission, develop and implement prevention strategies and interventions to translate the standards into the English operating landscape. It also aims to support local authority commissioners to develop their prevention strategies and implement them in line with evidence.  

Taxonomy of Institutional Issues that Act as Barriers to the Implementation of Pavement Management Systems, 1994

The benefits of pavement management system when fully implemented are well known and the history of successful implementation is rich. Implementation occurs, for purposes of this paper, when the pavement management system is the critical component for making pavement decisions. This paper addresses the issues that act as barriers to full implementation of pavement management systems. Institutional barriers, not technical and financial barriers, are more commonly responsible for a pavement management systems falling short of full implementation. The paper groups these institutional issues into a general taxonomy. In general, more effort needs to be put forth by highway agencies to overcome institutional issues. Most agencies approach pavement management as a technical process, but more commonly, institutional issues become more problematic and thus require more attention paid to institutional issues. The paper concludes by summarizing the implementation process being taken by the Iowa Department of Transportation. The process was designed to overcome institutional barriers and facilitate the complete and full implementation of their pavement management system.

Design and implementation of a non-destructive defect detection technique based on UWB-SAR imaging

In the last twenty years aerospace and automotive industries started working widely with composite materials, which are not easy to test using classic Non-Destructive Inspection (NDI) techniques. Pairwise, the development of safety regulations sets higher and higher standards for the qualification and certification of those materials. In this thesis a new concept of a Non-Destructive defect detection technique is proposed, based on Ultrawide-Band (UWB) Synthetic Aperture Radar (SAR) imaging. Similar SAR methods are yet applied either in minefield [22] and head stroke [14] detection. Moreover feasibility studies have already demonstrated the validity of defect detection by means of UWB radars [12, 13]. The system was designed using a cheap commercial off-the-shelf radar device by Novelda and several tests of the developed system have been performed both on metallic specimen (aluminum plate) and on composite coupon (carbon fiber). The obtained results confirm the feasibility of the method and highlight the good performance of the developed system considered the radar resolution. In particular, the system is capable of discerning healthy coupons from damaged ones, and correctly reconstruct the reflectivity image of the tested defects, namely a 8 x 8 mm square bulge and a 5 mm drilled holes on metal specimen and a 5 mm drilled hole on composite coupon.

Design and implementation of BIRDY satellite data and Radiation Payload simulators

Numerical modelling and simulations are needed to develop and test specific analysis methods by providing test data before BIRDY would be launched. This document describes the "satellite data simulator" which is a multi-sensor, multi-spectral satellite simulator produced especially for the BIRDY mission which could be used as well to analyse data from other satellite missions providing energetic particles data in the Solar system.