An effective on-the-job training model-to facilitate strategy execution

Strategy execution has been a heated topic in the management world in recent years. However, according to a survey done by the Conference Board (2014), the chief executives are so concerned about the execution in their companies and have rated it as the No.1 or No.2 most challenging issue. Many of them choose to invest in training with a purpose to harvest the most for strategy execution. Therefore, this research is trying to find out a model to design training programs that can at most contribute to the success of strategy execution with three real-life training cases done by BTS Consulting Service. It was found that strategy execution could be greatly supported by training programs that take into consideration the four factors, namely Alignment, Mindset to Change, Capability and Organization Support. Main implications of the findings are presented and discussed. Key

Contingent contracts

International businesses bring with them additional negotiation complexities and extra risks, thus calling for negotiation integrative solutions and additional legal protection. The recent economic crisis forced, companies, including SMEs, to look for international markets and face these additional complexities and issues. In the search for a practical and simplified solution, to serve less sophisticated companies, this paper brings insights from the negotiation literature to a specific legal issue. Specifically, I investigate the negotiation and use of contingent agreements as a tool for facilitating the negotiation process and managing risk in international deals. Looking into an international sale of goods from Portugal to Brazil, this paper proposes the structuring of two contingent contracts related to two category of products in order to demonstrate the potential benefits of some of its relevant features, specifically the creation of incentives and identification and allocation of future risks. In general, the structuring of contingent agreements is likely to provide positive results in mitigating the issues of lack of trust and dealing with the additional risks derived from international deals, therefore facilitating and improving the overall quality of the deal.

Efficiency Comparison of DFT/IDFT Algorithms by Evaluating Diverse Hardware Implementations

In this paper we investigate various algorithms for performing Fast Fourier Transformation (FFT)/Inverse Fast Fourier Transformation (IFFT), and proper techniques for maximizing the FFT/IFFT execution speed, such as pipelining or parallel processing, and use of memory structures with pre-computed values (look up tables -LUT) or other dedicated hardware components (usually multipliers). Furthermore, we discuss the optimal hardware architectures that best apply to various FFT/IFFT algorithms, along with their abilities to exploit parallel processing with minimal data dependences of the FFT/IFFT calculations. An interesting approach that is also considered in this paper is the application of the integrated processing-in-memory Intelligent RAM (IRAM) chip to high speed FFT/IFFT computing. The results of the assessment study emphasize that the execution speed of the FFT/IFFT algorithms is tightly connected to the capabilities of the FFT/IFFT hardware to support the provided parallelism of the given algorithm. Therefore, we suggest that the basic Discrete Fourier Transform (DFT)/Inverse Discrete Fourier Transform (IDFT) can also provide high performances, by utilizing a specialized FFT/IFFT hardware architecture that can exploit the provided parallelism of the DFT/IDF operations. The proposed improvements include simplified multiplications over symbols given in polar coordinate system, using sinе and cosine look up tables, and an approach for performing parallel addition of N input symbols.

Efficiency Comparison of DFT/IDFT Algorithms by Evaluating Diverse Hardware : Implementations,Parallelization Prospectsand Possible Improvements

In this paper we investigate various algorithms for performing Fast Fourier Transformation (FFT)/Inverse Fast Fourier Transformation (IFFT), and proper techniquesfor maximizing the FFT/IFFT execution speed, such as pipelining or parallel processing, and use of memory structures with pre-computed values (look up tables -LUT) or other dedicated hardware components (usually multipliers). Furthermore, we discuss the optimal hardware architectures that best apply to various FFT/IFFT algorithms, along with their abilities to exploit parallel processing with minimal data dependences of the FFT/IFFT calculations. An interesting approach that is also considered in this paper is the application of the integrated processing-in-memory Intelligent RAM (IRAM) chip to high speed FFT/IFFT computing. The results of the assessment study emphasize that the execution speed of the FFT/IFFT algorithms is tightly connected to the capabilities of the FFT/IFFT hardware to support the provided parallelism of the given algorithm. Therefore, we suggest that the basic Discrete Fourier Transform (DFT)/Inverse Discrete Fourier Transform (IDFT) can also provide high performances, by utilizing a specialized FFT/IFFT hardware architecture that can exploit the provided parallelism of the DFT/IDF operations. The proposed improvements include simplified multiplications over symbols given in polar coordinate system, using sinе and cosine look up tables,and an approach for performing parallel addition of N input symbols.

Multi-phase post-mortem CT angiography: development of a standardized protocol.

The objective of this work was to develop an easily applicable technique and a standardized protocol for high-quality post-mortem angiography. This protocol should (1) increase the radiological interpretation by decreasing artifacts due to the perfusion and by reaching a complete filling of the vascular system and (2) ease and standardize the execution of the examination. To this aim, 45 human corpses were investigated by post-mortem computed tomography (CT) angiography using different perfusion protocols, a modified heart-lung machine and a new contrast agent mixture, specifically developed for post-mortem investigations. The quality of the CT angiographies was evaluated radiologically by observing the filling of the vascular system and assessing the interpretability of the resulting images and by comparing radiological diagnoses to conventional autopsy conclusions. Post-mortem angiography yielded satisfactory results provided that the volumes of the injected contrast agent mixture were high enough to completely fill the vascular system. In order to avoid artifacts due to the post-mortem perfusion, a minimum of three angiographic phases and one native scan had to be performed. These findings were taken into account to develop a protocol for quality post-mortem CT angiography that minimizes the risk of radiological misinterpretation. The proposed protocol is easy applicable in a standardized way and yields high-quality radiologically interpretable visualization of the vascular system in post-mortem investigations.

Kin structure and queen execution in the Argentine ant Linepithema humile

Every spring, workers of the Argentine Ant Linepithema humile kill a large proportion of queens within their nests, Although this behaviour inflicts a high energetic cost oil the colonies, its biological significance has remained elusive so far. An earlier study showed that the probability of a queen being executed is not related to her weight, fecundity, or age. Here we test the hypothesis that workers collectively eliminate queens to which they are less related, thereby increasing their inclusive fitness. We found no evidence for this hypothesis. Workers of a nest were on average not significantly less related to executed queens than to surviving ones. Moreover, a population genetic analysis revealed that workers were not genetically differentiated between nests. This means that workers of a given nest are equally related to any queen in the population and that there can be no increase in average worker-queen relatedness by selective elimination of queens. Finally, our genetic analyses also showed that, in contrast to workers, queens were significantly genetically differentiated between nests and that there was significant isolation by distance for queens.

Late removal of retrievable caval filters.

The advent of retrievable caval filters was a game changer in the sense, that the previously irreversible act of implanting a medical device into the main venous blood stream of the body requiring careful evaluation of the pros and cons prior to execution suddenly became a "reversible" procedure where potential hazards in the late future of the patient lost most of their weight at the time of decision making. This review was designed to assess the rate of success with late retrieval of so called retrievable caval filters in order to get some indication about reasonable implant duration with respect to relatively "easy" implant removal with conventional means, i.e., catheters, hooks and lassos. A PubMed search (www.pubmed.gov) was performed with the search term "cava filter retrieval after 30 days clinical", and 20 reports between 1994 and 2013 dealing with late retrieval of caval filters were identified, covering approximately 7,000 devices with 600 removed filters. The maximal duration of implant reported is 2,599 days and the maximal implant duration of removed filters is also 2,599 days. The maximal duration reported with standard retrieval techniques, i.e., catheter, hook and/or lasso, is 475 days, whereas for the retrievals after this period more sophisticated techniques including lasers, etc. were required. The maximal implant duration for series with 100% retrieval accounts for 84 days, which is equivalent to 12 weeks or almost 3 months. We conclude that retrievable caval filters often become permanent despite the initial decision of temporary use. However, such "forgotten" retrievable devices can still be removed with a great chance of success up to three months after implantation. Conventional percutaneous removal techniques may be sufficient up to sixteen months after implantation whereas more sophisticated catheter techniques have been shown to be successful up to 83 months or more than seven years of implant duration. Tilting, migrating, or misplaced devices should be removed early on, and replaced if indicated with a device which is both, efficient and retrievable.

Development of sales invoicing process in industrial services

The objective of this Master’s thesis is to find ways to streamline the invoicing process of the case company. In order to streamline the process, the bottlenecks and development areas of the present invoicing process needs to be identified. The bottlenecks are based on interviews made to personnel. The thesis also offers solutions to overcome the identified bottlenecks. The problem is the slowness of the invoicing process which should get rid off. The slow invoicing process causes delays in obtaining payments. There are many reasons for the slowness and inefficiency of the invoicing process. One of the biggest reasons is that the information systems are not deployed entirely. It causes additional work for everyone. Practices with the customers affect also to the smooth flow of invoicing. The contracts determine when the customer can be invoiced but also work approvals, missing work orders and customer’s own invoicing basis slow the process. The fastest and cheapest solution is to deploy the systems better and do things correctly. Thus duplicated work would decrease and resources would be saved. The work allocation should be modified and the practices with customer should be influenced too. In the future the meaning of IT should be highlighted and new devices exploited.

Development of remote monitoring process tools for biomass fired bubbling fluidized bed boilers

Remote monitoring of a power boiler allows the supplying company to make sure that equipment is used as supposed to and gives a good chance for process optimization. This improves co-operation between the supplier and the customer and creates an aura of trust that helps securing future contracts. Remote monitoring is already in use with recovery boilers but the goal is to expand especially to biomass-fired BFB-boilers. To make remote monitoring possible, data has to be measured reliably on site and the link between the power plant and supplying company’s server has to work reliably. Data can be gathered either with the supplier’s sensors or with measurements originally installed in the power plant if the plant in question is not originally built by the supplying company. Main goal in remote monitoring is process optimization and avoiding unnecessary accidents. This can be achieved for instance by following the efficiency curves and fouling in different parts of the process and comparing them to past values. The final amount of calculations depends on the amount of data gathered. Sudden changes in efficiency or fouling require further notice and in such a case it’s important that dialogue toward the power plant in question also works.

Niagara Lodges of the Loyal Orange Association of British America

The Loyal Orange Association of British America is a Protestant fraternal society. The Loyal Orange Association originated in Ulster, Ireland during the late eighteenth century. Its purpose was to promote Protestant rights and privileges. The association was exclusively Protestant, fraternal, democratic, and benevolent. Orange principles were brought to Upper Canada by Protestant Irish settlers after 1815. The first Canadian Orange Lodge was formally established in Brockville, Leeds County, 1830. By the late 19th and early 20th century, the Loyal Orange Association of British North America had gained considerable popularity and political influence. Many prominent politicians, including several prime ministers, were members. Orangemen were particularly concerned with issues such as separate school funding, language rights, immigration, religious freedom and conscription. Further, they demanded the execution of Louis Riel and opposed the Jesuits Estates settlement. Administrative sketch courtesy Archives of Ontario.

The effect of a segmental, localized lower limb cooling protocol on muscular strength and balance

The human neuromuscular system is susceptible to changes within the thermal environment. Cold extrinsic temperatures can significantly reduce muscle and nervous system function and communication, which can have consequences for motor performance. A repeated measures design protocol exposed participants to a 12°C cold water immersion (CWI) up to the ankle, knee, and hip to determine the effect that reduced skin and muscle temperature had on balance and strength task execution. Although a linear reduction in the ability to perform balance tasks was seen from the control condition through to the hip CWI, results from the study indicated a significant reduction in dynamic balance (Star Excursion Balance Test reach distance) performance from only the hip CWI (P<0.05). This reduced performance could have been due to an increase in joint stiffness, increased agonist-antagonist co-contraction, and/or reduced isokinetic muscular strength. Reduced physical performance due to cold temperature could negatively impact outdoor recreational athletics.

Job Demands and Organizational Citizenship Behavior: The Roles of Organizational Commitment and Social Interaction

Drawing from the Job Demands-Resources (JD-R) model and research on social exchange relationships, this study investigates the impact of three job demands (work overload, interpersonal conflict, and dissatisfaction with the organization’s current situation) on employees’ organizational citizenship behavior (OCB), the hitherto unexplored mediating role of organizational commitment in the link between job demands and organizational citizenship behavior (OCB), as well as how this mediating effect might be moderated by social interaction. Using a multi-source, two-wave research design, surveys were administered to 707 employees and their supervisors in a Mexican-based organization. The hypotheses were tested with hierarchical regression analysis. The results indicate a direct negative relationship between interpersonal conflict and OCB, and a mediating effect of organizational commitment for interpersonal conflict and dissatisfaction with the organization’s current situation. Further, social interaction moderates the mediating effect of organizational commitment for each of the three job demands such that the mediating effect is weaker at higher levels of social interaction. The study suggests that organizations aiming to instill OCB among their employees should match the immediate work context surrounding their task execution with an internal environment that promotes informal relationship building.

Synthesis of unnatural analogues of pancratistatin and narciclasine

Described herein is the chemoenzymatic synthesis of several different types of unnatural analogues of Amaryllidaceae constituents. Development and refinement of existing and design and execution of new approaches towards the synthesis of C-1 analogues of pancratistatin and A-ring heterocyclic analogues of narciclasine are discussed. Evaluation of the new analogues as cancer growth inhibitory agents is also described

Letter which contains a report to George Rykert of Friends of the Port Dalhousie Thorold Railway

Letter which contains a report to George Rykert of Friends of the Port Dalhousie Thorold Railway. In this unsigned letter regarding contracts for the railway, it is suggested that the quantity of the excavation could have been done at 25 cents less per yard, July 23, 1855.

The contribution of skate blade properties to skating speed

The purpose of the study was to investigate the relative contribution of skate blade properties to on-ice skating speed. Thirty-two male ice hockey players (mean age = 19±2.65 yrs.) representing the Ontario Minor Hockey Association (OMHA; Midget AAA and Junior), Canadian Inter University Sport (CIS: Varsity), Ontario hockey league (OHL) and East Coast Hockey League (ECHL), and the playing positions of forwards (n=18) and defense (n=14) were recruited to participate. Skate related equipment worn by the players for the purpose of the research was documented and revealed that 80% of the players wore Bauer skates, Tuuk blade holders and LS2 skate blades. Subjects completed a battery of eight on-ice skating drills used to measure and compare two aspects of skating speed; acceleration [T1(s)] and total time to complete each drill [TT(s)] while skating on three skate blade conditions. The drills represented skills used in the game of hockey, both in isolation (e.g., forward skating, backward skating, stops and starts, and cornering) and in sequence to simulate the combination of skills used in a shift of game play. The three blade conditions consisted of (i) baseline, represented by the blades worn by the player throughout their current season of play; (ii) experimental blades (EB), represented by brand name experimental blades with manufacturers radius of contour and a standardized radius of hollow; and (iii) customized experimental blades (CEB), represented by the same brand name experimental blades sharpened to the players’ preference as identified in the baseline condition. No significant differences were found in acceleration time [T1(s)] or total time to complete [TT(s)] the isolated drills across blade conditions; however significant differences were revealed in both T1(s) and TT(s) measured during the execution of the sequenced drill across blade conditions. A iii Bonferroni post hoc test revealed that players skated significantly faster when skating on the CEB condition compared to the baseline condition (p≤.05). A questionnaire assessing subjects perceived comfort, confidence and effort expended while skating on the experimental blades revealed that players were significantly more comfortable when skating on the CEB versus the EB condition (p≤.05). Outcomes of the study provide evidence to suggest that the experimental skate blades customized with the players preferred blade sharpening characteristics results in faster skating speed in a combination drill representing skills performed in gameplay.