Media Education in the Finnish School System : A Conceptual Analysis of the Subject Didactic Dimension of Media Education

The aim of the doctoral dissertation was to further our theoretical and empirical understanding of media education as practised in the context of Finnish basic education. The current era of intensive use of the Internet is recognised too. The doctoral dissertation presents the subject didactic dimension of media education as one of the main results of the conceptual analysis. The theoretical foundation is based on the idea of dividing the concept of media education into media and education (Vesterinen et al., 2006). As two ends of the dimension, these two can be understood didactically as content and pedagogy respectively. In the middle, subject didactics is considered to have one form closer to content matter (Subject Didactics I learning about media) and another closer to general pedagogical questions (Subject Didactics II learning with/through media). The empirical case studies of the dissertation are reported with foci on media literacy in the era of Web 2.0 (Kynäslahti et al., 2008), teacher reasoning in media educational situations (Vesterinen, Kynäslahti - Tella, 2010) and the research methodological implications of the use of information and communication technologies in the school (Vesterinen, Toom - Patrikainen, 2010). As a conclusion, Media-Based Media Education and Cross-Curricular Media Education are presented as two subject didactic modes of media education in the school context. Episodic Media Education is discussed as the third mode of media education where less organised teaching, studying and learning related to media takes place, and situations (i.e. episodes, if you like) without proper planning or thorough reflection are in focus. Based on the theoretical and empirical understanding gained in this dissertation, it is proposed that instead of occupying a corner of its own in the school curriculum, media education should lead the wider change in Finnish schools.

Common past, divided memories: historical memory of the Polish minority members in Lithuania

The Master’s thesis examines historical memory of the Polish minority members in Lithuania with regard to how their interpretation of the common Polish-Lithuanian history reiterates or differs from the official Polish and Lithuanian narratives conveyed by the school textbooks. History teaching in high schools carries a crucial state-supported role of “identity building policies” – it maintains a national narrative of memory, which might be exclusive to minorities and their peculiar understanding of history. Lithuanians Poles, in this regard, represent a national minority, which is exposed to two conflicting national narratives of the common past – Polish and Lithuanian. As members of the Polish nation, their understanding of the common Polish-Lithuanian history is conditioned by the Polish historical narrative, acquired as part of the collective memory of the family and/or different minority organizations. On the other hand, they encounter Lithuanian historical narrative of the Polish-Lithuanian past throughout the secondary school history education, where the curriculum, even if taught in Polish, largely represents the Lithuanian point of view. The concept of collective memory is utilized to refer to collective representations of national memory (i.e. publicly articulated narratives and images of collective past in history textbooks) as well as to socially framed individual memories (i.e. historical memory of minority members, where individual remembering is framed by the social context of their identity). The thesis compares the official national historical narratives in Lithuania and Poland, as conveyed by the Polish and Lithuanian history textbooks. The consequent analysis of qualitative interviews with the Polish minority members in Lithuania offers insights into historical memory of Lithuanian Poles and its relation to the official Polish and Lithuanian national narratives of the common past. Qualitative content analysis is applied in both parts of the analysis. The narratives which emerge from the interview data could be broadly grouped into two segments. First, a more pronounced view on the past combines the following elements: i) emphasis on the value of multicultural and diverse past of Lithuania, ii) contestation of “Lithuanocentricity” of the Lithuanian narrative and iii) rejection of the term “occupation”, based on the cultural presuppositions – the dominant position of Polish culture and language in the Vilnius region, symbolic belonging and “Lithuanianness” of the local Poles. While the opposition to the term of “occupation” is in accord with the official Polish narrative conveyed by the textbooks, the former two elements do not neatly adhere to either Polish or Lithuanian textbook narratives. They should rather be considered as an expression of claims for inclusion of plural pasts into Lithuanian collective memory and hence as claims for symbolic enfranchisement into the Lithuanian “imagined community”. The second strand of views, on the other hand, does not exclude assertions about the historically dominant position of Polish culture in Lithuania, but at the same time places more emphasis on the political and historical continuity of the Lithuanian state and highlights a long-standing symbolic connectedness of Vilnius and Lithuania, thus, striking a middle way between the Polish and Lithuanian interpretations of the past.

Philosophy as a Path to Happiness : Attainment of Happiness in Arabic Peripatetic and Ismaili Philosophy

The aim of the dissertation is to explore the idea of philosophy as a path to happiness in classical Arabic philosophy. The starting point is in comparison of two distinct currents between the 10th and early 11th centuries, Peripatetic philosophy, represented by al-Fārābī and Ibn Sīnā, and Ismaili philosophy represented by al-Kirmānī and the Brethren of Purity. They initially offer two contrasting views about philosophy in that the attitude of the Peripatetics is rationalistic and secular in spirit, whereas for the Ismailis philosophy represents the esoteric truth behind revelation. Still, they converge in their view that the ultimate purpose of philosophy lies in its ability to lead man towards happiness. Moreover, they share a common concept of happiness as a contemplative ideal of human perfection, which refers primarily to an otherworldly state of the soul s ascent to the spiritual world. For both the way to happiness consists of two parts: theory and practice. The practical part manifests itself in the idea of the purification of the rational soul from its bodily attachments in order for it to direct its attention fully to the contemplative life. Hence, there appears an ideal of philosophical life with the goal of relative detachment from the worldly life. The regulations of the religious law in this context appear as the primary means for the soul s purification, but for all but al-Kirmānī they are complemented by auxiliary philosophical practices. The ascent to happiness, however, takes place primarily through the acquisition of theoretical knowledge. The saving knowledge consists primarily of the conception of the hierarchy of physical and metaphysical reality, but all of philosophy forms a curriculum through which the soul gradually ascends towards a spiritual state of being along an order that is inverse to the Neoplatonic emanationist hierarchy of creation. For Ismaili philosophy the ascent takes place from the exoteric religious sciences towards the esoteric philosophical knowledge. For Peripatetic philosophers logic performs the function of an instrument enabling the ascent, mathematics is treated either as propaedeutic to philosophy or as a mediator between physical and metaphysical knowledge, whereas physics and metaphysics provide the core of knowledge necessary for the attainment of happiness.

Process of burnout: structure, antecedents, and consequences

The major changes that have been witnessed in today's workplaces are challenging the mental well-being of employed people. Stress and burnout are considered to be modern epidemics, and their importance to physical health and work ability has been acknowledged world-wide. The aim of the thesis was to study the concept of burnout as a process proceeding from its antecedents, through the development of the syndrome, and to its outcomes. Several work-related factors considered antecedents of burnout were studied in different occupational groups. The syndrome of burnout is seen as consisting of three dimensions - exhaustion, cynicism and lack of professional efficacy - and different alternatives for the sequential development of these dimensions were tested. Furthermore, several indicators of the severely detrimental health and work ability outcomes of burnout were investigated in a longitudinal study design. The research questions were as follows. 1) Is burnout, as measured with the Maslach Burnout Inventory - General Survey (MBI-GS), a three-dimensional construct and how invariant is the factorial structure across occupations (Finnish) and national samples (Finnish, Swedish and Dutch)? How persistent is exhaustion over time? 2) What is the sequential process of burnout? Is it similar across occupations? How do work stressors relate to the process? 3) How does burnout relate to severe health consequences as well as temporary and chronic work disability according to hospitalization periods, sick-leave episodes and receiving disability pensions? The data were collected between 1986 and 2005. The population of the study consisted of respondents to a company-wide questionnaire survey carried out in 1996-1997 (N=9705, response rate 63%). The participants comprised 6025 blue-collar workers and 3680 white-collar workers. The majority were men (N=7494) and the average age was 43.7 years. In addition, a sample from the population had responded to a questionnaire survey in 1988, which was combined with the 1996 data to form panel data on 713 respondents. The register-based data were collected between 1986 and 2005 from 1) the company's occupational health services' records for a sample of respondents from the 1996 questionnaire survey (sick-leave data), 2) hospitalization records from the Hospital discharge register, and 3) disability pension records from the Finnish Centre for Pensions. These data were combined person by person with the 1996 questionnaire survey data with the help of personal identification numbers which were saved with the study numbers by the researchers. The results showed that burnout consists of three separate but correlating symptoms: exhaustion, cynicism and lack of professional efficacy. As a syndrome, burnout was strongly related to job stressors at work, and seemed to develop from exhaustion through cynicism to lack of professional efficacy in a similar manner among white-collar and blue-collar employees. The results also showed that exhaustion persisted even after eight years of follow-up but did not predict cynicism or lack of professional efficacy after that amount of time. Nor were job stressors longitudinally related to burnout. Longitudinal results were obtained for the severe health-related consequences of burnout. The investigated outcomes represented different phases of health deterioration ranging from sick-leaves and hospitalization periods to receiving work disability pensions. The results showed that burnout syndrome, and its elements of exhaustion and cynicism, were related to future mental and cardiovascular disorders as indicated by hospitalization periods. Burnout was also related to future sick-leave periods due to mental, cardiovascular and musculoskeletal disorders. Of the separate elements, exhaustion was related to the same three categories of disorder, cynicism to mental, musculoskeletal and digestive disorders, and lack of professional efficacy to mental and musculoskeletal disorders. Burnout also predicted receiving disability pensions due to mental and musculoskeletal disorders among initially healthy subjects. Exhaustion was related to receiving disability pensions even when self-reported chronic illness was taken into account. The results suggest that burnout is a multidimensional, chronic, work-related syndrome, which may have serious consequences for health and work ability.

CSR in forest industry – Case study of reporting and implementation of social responsibility in three international companies

Corporate Social Responsibility (CSR) has become increasingly important topic in forest industries, and other global companies, in recent years. Globalisation, faster information delivery and demand for sustainable development have set new challenges for global companies in their business operations. Also the importance of stakeholder relations, and pressure to become more transparent has increased in the forest industries. Three dimensions of corporate responsibility economic, environmental and social, are often included in the concept of CSR. Global companies mostly claim that these dimensions are equally important. This study analyses CSR in forest industry and has focus on reporting and implementation of social responsibility in three international companies. These case-companies are Stora Enso, SCA and Sappi, and they have different geographical base, product portfolios and therefore present interesting differences about forest industry strategy and CSR. Global Reporting Initiative (GRI) has created the most known and used reporting framework in CSR reporting. GRI Guidelines have made CSR reporting a uniform function, which can also be measured between companies and different sectors. GRI Guidelines have also made it possible to record and control CSR data in the companies. In recent years the use of GRI Guidelines has increased substantially. Typically CSR reporting on economic and environmental responsibility have been systematic in the global companies and often driven by legistlation and other regulations. However the social responsibility has been less regulated and more difficult to compare. Therefore it has previously been often less focused in the CSR reporting of the global companies. The implementation and use of GRI Guidelines have also increased dialogue on social responsibility issues and stakeholder management in global companies. This study analyses the use of GRI´s framework in the forest industry companies´ CSR reporting. This is a qualitative study and the disclosure of data is empricially analysed using content analysis. Content analysis has been selected as a method for this study because it makes it possible to use different sources of information. The data of this study consists of existing academic literature of CSR, sustainability reports of thecase-companies during 2005-2009, and the semi-structured interviews with company representatives. Different sources provide the possibility to look at specific subject from more than one viewpoint. The results of the study show that all case-companies have relatively common themes in their CSR disclosure, and the differences rise mainly from their product-portfolios, and geographic base. Social impacts to local communities, in the CSR of the companies, were mainly dominated by issues concerning creating wealth to the society and impacting communities through creation of work. The comparability of the CSR reporting, and especially social indicators increased significally from 2007 onwards in all case-companies. Even though the companies claim that three dimensions of CSR economic, environmental and social are equally important economic issues and profit improvement still seem to drive most of the operations in the global companies. Many issues that are covered by laws and regulations are still essentially presented as social responsibility in CSR. However often the unwelcome issues in companies like closing operations are covered just briefly, and without adequate explanation. To make social responsibility equally important in the CSR it would demand more emphasis from all the case-companies. A lot of emphasis should be put especially on the detail and extensiveness of the social reponsibility content in the CSR.

Management of Routine in Two Chinese Kindergartens - An Ethnographic Study

Based on a one-month long ethnographic study conducted in two Chinese kindergartens, this study aims to understand the issue of discipline in the Chinese preschool setting through an examination of practices teachers use to manage everyday routines in the kindergarten. It also seeks to understand teachers’ values behind their choices of practices. Data of this study are comprised of three parts - notes of participant observation in eight classrooms with a focus on teacher-child interaction; interviews with nine teachers and directors of the two kindergartens; and written accounts of four teachers collected after the fieldwork in order to understand the particular practices of teachers’ praising and criticizing children. A grounded theory approach is applied to code and analyze data. Results of analysis are structured as followed. First the concept of routine is clarified based on teachers’ definition of it and observation notes on its main components, namely the timetable of everyday activities; general behavioral rules in the kindergarten; and detailed rules and procedures for various activities in the kindergarten. Then practices for managing routines are examined – how teachers organize children in activities, enforce routines, and restore routines when they are not followed well. After that, the matter of self-control is examined in relation with external control. Then teachers’ perception of their roles as the manager, director and executor of routines is presented in a discourse of control in which the values behind practices are found to be embedded. The next section of analysis examines the role of routine in relation with other activities in the kindergarten. Results indicate that routine which is supposed to be the foundation of other activities is in conflict with other activities. The last section of analysis provides some reflections on the rational of routine management in Chinese kindergartens in relation with the overall goals of Chinese preschool education. It also provides some reflections on the effect current mode of teacher-child interactions may have on children's self construction and their understanding of self in relation with the society. As a conclusion, this study suggests that the current mode of routine management in Chinese kindergartens relies heavily on teachers' control, leaving great room for better acknowledging children's agency.

Effect of primary system damping on the optimum design of an untuned viscous dynamic vibration absorber

Explicit criteria for the optimum design of an untuned viscous dynamic vibration absorber are developed for the case of a viscously damped single degree of freedom springmass system. It is shown that for the particular case of an undamped main system, the results reduce to the classical ones obtained by using the concept of a fixed point on the response curve.

An Axiom of Military Law : Applicability of National Criminal Law to Military Personnel and Associated Civilians Abroad

States regularly deploy elements of their armed forces abroad. When that happens, the military personnel concerned largely remain governed by the penal law of the State that they serve. This extraterritorial extension of national criminal law, which has been treated as axiomatic in domestic law and ignored by international law scholarship, is the subject of this dissertation. The first part of the study considers the ambit of national criminal law without any special regard to the armed forces. It explores the historical development of the currently prevailing system of territorial law and looks at the ambit that national legal systems claim today. Turning then to international law, the study debunks the oddly persistent belief that States enjoy a freedom to extend their laws to extraterritorial conduct as they please, and that they are in this respect constrained only by some specific prohibitions in international law. Six arguments historical, empirical, ideological, functional, doctrinal and systemic are advanced to support a contrary view: that States are prohibited from extending the reach of their legal systems abroad, unless they can rely on a permissive principle of international law for doing so. The second part of the study deals specifically with State jurisdiction in a military context, that is to say, as applied to military personnel in the strict sense (service members) and various civilians serving with or accompanying the forces (associated civilians). While the status of armed forces on foreign soil has transformed from one encapsulated in the customary concept of extraterritoriality to a modern regulation of immunities granted by treaties, elements of armed forces located abroad usually do enjoy some degree of insulation from the legal system of the host State. As a corollary, they should generally remain covered by the law of their own State. The extent of this extraterritorial extension of national law is revealed in a comparative review of national legislation, paying particular attention to recent legal reforms in the United States and the United Kingdom two states that have sought to extend the scope of their national law to cover the conduct of military contractor personnel. The principal argument of the dissertation is that applying national criminal law to service members and associated civilians abroad is distinct from other extraterritorial claims of jurisdiction (in particular, the nationality principle or the protective principle of jurisdiction). The service jurisdiction over the armed forces has a distinct aim: ensuring the coherence and indivisibility of the forces and maintaining discipline. Furthermore, the exercise of service jurisdiction seeks to reduce the chances of the State itself becoming internationally liable for the conduct of its service members and associated civilians. Critically, the legal system of the troop-deploying State, by extending its reach abroad, seeks to avoid accountability gaps that might result from immunities from host State law.

Studies of cryotreatment on the performance of integral diaphragm pressure transducers for space application

The integral diaphragm pressure transducers machined out of precipitation hardened martensite stainless steel (APX4) are widely used for propellant pressure measurements in space applications. These transducers are expected to exhibit dimensional stability and linearity for their entire useful life. These vital factors are very critical for the reliable performance and dependability of the pressure transducers. However, these transducers invariably develop internal stresses during various stages of machining. These stresses have an adverse effect on the performance of the transducers causing deviation from linearity. In order to eliminate these possibilities, it was planned to cryotreat the machined transducers to improve both the long-term linearity and dimensional stability. To study these effects, an experimental cryotreatment unit was designed and developed based on the concept of indirect cooling using the concept of cold nitrogen gas forced closed loop convection currents. The system has the capability of cryotreating large number of samples for varied rates of cooling, soaking and warm-up. After obtaining the initial levels of residual stress and retained austenite using X-ray diffraction techniques, the pressure transducers were cryotreated at 98 K for 36 h. Immediately after cryotreatment, the transducers were tempered at 510 degrees C for 3 h in vacuum furnace. Results after cryo treatment clearly indicated significant reduction in residual stress levels and conversion of retained austenite to martensite. These changes have brought in improvements in long term zero drift and dimensional stability. The cryotreated pressure transducers have been incorporated for actual space applications. (c) 2010 Published by Elsevier Ltd.

Alkaloid synthesis: stereoselective approach towards fawcettimine-serratinine group of lycopodium alkaloids

The concept of carbocycle-heterocycle equivalency has been utilised to assemble the framework of fawcettimine-serratinine group of alkaloids from 1,5-cyclooctadiene through a common tricarbocyclic intermediate 3.

Optimization and design of energy transport system for solar cooking application

This paper proposes a hybrid solar cooking system where the solar energy is transported to the kitchen. The thermal energy source is used to supplement the Liquefied Petroleum Gas (LPG) that is in common use in kitchens. Solar energy is transferred to the kitchen by means of a circulating fluid. Energy collected from sun is maximized by changing the flow rate dynamically. This paper proposes a concept of maximum power point tracking (MPPT) for the solar thermal collector. The diameter of the pipe is selected to optimize the overall energy transfer. Design and sizing of different components of the system are explained. Concept of MPPT is validated with simulation and experimental results. (C) 2010 Elsevier Ltd. All rights reserved.

Local systems, global impacts : Using life cycle assessment to analyse the potential and constraints of industrial symbioses

Human activities extract and displace different substances and materials from the earth s crust, thus causing various environmental problems, such as climate change, acidification and eutrophication. As problems have become more complicated, more holistic measures that consider the origins and sources of pollutants have been called for. Industrial ecology is a field of science that forms a comprehensive framework for studying the interactions between the modern technological society and the environment. Industrial ecology considers humans and their technologies to be part of the natural environment, not separate from it. Industrial operations form natural systems that must also function as such within the constraints set by the biosphere. Industrial symbiosis (IS) is a central concept of industrial ecology. Industrial symbiosis studies look at the physical flows of materials and energy in local industrial systems. In an ideal IS, waste material and energy are exchanged by the actors of the system, thereby reducing the consumption of virgin material and energy inputs and the generation of waste and emissions. Companies are seen as part of the chains of suppliers and consumers that resemble those of natural ecosystems. The aim of this study was to analyse the environmental performance of an industrial symbiosis based on pulp and paper production, taking into account life cycle impacts as well. Life Cycle Assessment (LCA) is a tool for quantitatively and systematically evaluating the environmental aspects of a product, technology or service throughout its whole life cycle. Moreover, the Natural Step Sustainability Principles formed a conceptual framework for assessing the environmental performance of the case study symbiosis (Paper I). The environmental performance of the case study symbiosis was compared to four counterfactual reference scenarios in which the actors of the symbiosis operated on their own. The research methods used were process-based life cycle assessment (LCA) (Papers II and III) and hybrid LCA, which combines both process and input-output LCA (Paper IV). The results showed that the environmental impacts caused by the extraction and processing of the materials and the energy used by the symbiosis were considerable. If only the direct emissions and resource use of the symbiosis had been considered, less than half of the total environmental impacts of the system would have been taken into account. When the results were compared with the counterfactual reference scenarios, the net environmental impacts of the symbiosis were smaller than those of the reference scenarios. The reduction in environmental impacts was mainly due to changes in the way energy was produced. However, the results are sensitive to the way the reference scenarios are defined. LCA is a useful tool for assessing the overall environmental performance of industrial symbioses. It is recommended that in addition to the direct effects, the upstream impacts should be taken into account as well when assessing the environmental performance of industrial symbioses. Industrial symbiosis should be seen as part of the process of improving the environmental performance of a system. In some cases, it may be more efficient, from an environmental point of view, to focus on supply chain management instead.  

Learning Challenges in Biogas Production for Sustainability : An activity theoretical study of a network from a swine industry chain

This study is about the challenges of learning in the creation and implementation of new sustainable technologies. The system of biogas production in the Programme of Sustainable Swine Production (3S Programme) conducted by the Sadia food processing company in Santa Catarina State, Brazil, is used as a case example for exploring the challenges, possibilities and obstacles of learning in the use of biogas production as a way to increase the environmental sustainability of swine production. The aim is to contribute to the discussion about the possibilities of developing systems of biogas production for sustainability (BPfS). In the study I develop hypotheses concerning the central challenges and possibilities for developing systems of BPfS in three phases. First, I construct a model of the network of activities involved in the BP for sustainability in the case study. Next, I construct a) an idealised model of the historically evolved concepts of BPfS through an analysis of the development of forms of BP and b) a hypothesis of the current central contradictions within and between the activity systems involved in BP for sustainability in the case study. This hypothesis is further developed through two actual empirical analyses: an analysis of the actors senses in taking part in the system, and an analysis of the disturbance processes in the implementation and operation of the BP system in the 3S Programme. The historical analysis shows that BP for sustainability in the 3S Programme emerged as a feasible solution for the contradiction between environmental protection and concentration, intensification and specialisation in swine production. This contradiction created a threat to the supply of swine to the food processing company. In the food production activity, the contradiction was expressed as a contradiction between the desire of the company to become a sustainable company and the situation in the outsourced farms. For the swine producers the contradiction was expressed between the contradictory rules in which the market exerted pressure which pushed for continual increases in scale, specialisation and concentration to keep the production economically viable, while the environmental rules imposed a limit to this expansion. Although the observed disturbances in the biogas system seemed to be merely technical and localised within the farms, the analysis proposed that these disturbances were formed in and between the activity systems involved in the network of BPfS during the implementation. The disturbances observed could be explained by four contradictions: a) contradictions between the new, more expanded activity of sustainable swine production and the old activity, b) a contradiction between the concept of BP for carbon credits and BP for local use in the BPfS that was implemented, c) contradictions between the new UNFCCC1 methodology for applying for carbon credits and the small size of the farms, and d) between the technologies of biogas use and burning available in the market and the small size of the farms. The main finding of this study relates to the zone of proximal development (ZPD) of the BPfS in Sadia food production chain. The model is first developed as a general model of concepts of BPfS and further developed here to the specific case of the BPfS in the 3S Programme. The model is composed of two developmental dimensions: societal and functional integration. The dimension of societal integration refers to the level of integration with other activities outside the farm. At one extreme, biogas production is self-sufficient and highly independent and the products of BP are consumed within the farm, while at the other extreme BP is highly integrated in markets and networks of collaboration, and BP products are exchanged within the markets. The dimension of functional integration refers to the level of integration between products and production processes so that economies of scope can be achieved by combining several functions using the same utility. At one extreme, BP is specialised in only one product, which allows achieving economies of scale, while at the other extreme there is an integrated production in which several biogas products are produced in order to maximise the outcomes from the BP system. The analysis suggests that BP is moving towards a societal integration, towards the market and towards a functional integration in which several biogas products are combined. The model is a hypothesis to be further tested through interventions by collectively constructing the new proposed concept of BPfS. Another important contribution of this study refers to the concept of the learning challenge. Three central learning challenges for developing a sustainable system of BP in the 3S Programme were identified: 1) the development of cheaper and more practical technologies of burning and measuring the gas, as well as the reduction of costs of the process of certification, 2) the development of new ways of using biogas within farms, and 3) the creation of new local markets and networks for selling BP products. One general learning challenge is to find more varied and synergic ways of using BP products than solely for the production of carbon credits. Both the model of the ZPD of BPfS and the identified learning challenges could be used as learning tools to facilitate the development of biogas production systems. The proposed model of the ZPD could be used to analyse different types of agricultural activities that face a similar contradiction. The findings could be used in interventions to help actors to find their own expansive actions and developmental projects for change. Rather than proposing a standardised best concept of BPfS, the idea of these learning tools is to facilitate the analysis of local situations and to help actors to make their activities more sustainable.

The Church and Its Boundaries : A Study of the Special Commission on Orthodox Participation in the WCC

The relationship between the Orthodox Churches and the World Council of Churches (WCC) became a crisis just before the 8th Assembly of the WCC in Harare, Zimbabwe in 1998. The Special Commission on Orthodox Participation in the WCC (SC), inaugurated in Harare, worked during the period 1999 2002 to solve the crisis and to secure the Orthodox participation in the WCC. The purpose of this study is: 1) to clarify the theological motives for the inauguration of the SC and the theological argumentation of the Orthodox criticism; 2) to write a reliable history and analysis of the SC; 3) to outline the theological argumentation, which structures the debate, and 4) to investigate the ecclesiological questions that arise from the SC material. The study spans the years 1998 to 2006, from the WCC Harare Assembly to the Porto Alegre Assembly. Hence, the initiation and immediate reception of the Special Commission are included in the study. The sources of this study are all the material produced by and for the SC. The method employed is systematic analysis. The focus of the study is on theological argumentation; the historical context and political motives that played a part in the Orthodox-WCC relations are not discussed in detail. The study shows how the initial, specific and individual Orthodox concerns developed into a profound ecclesiological discussion and also led to concrete changes in WCC practices, the best known of which is the change to decision-making by consensus. The Final Report of the SC contains five main themes, namely, ecclesiology, decision-making, worship/common prayer, membership and representation, and social and ethical issues. The main achievement of the SC was that it secured the Orthodox membership in the WCC. The ecclesiological conclusions made in the Final Report are twofold. On the one hand, it confirms that the very act of belonging to the WCC means the commitment to discuss the relationship between a church and churches. The SC recommended that baptism should be added as a criterion for membership in the WCC, and the member churches should continue to work towards the mutual recognition of each other s baptism. These elements strengthen the ecclesiological character of the WCC. On the other hand, when the Final Report discusses common prayer, the ecclesiological conclusions are much more cautious, and the ecclesiological neutrality of the WCC is emphasized several times. The SC repeatedly emphasized that the WCC is a fellowship of churches. The concept of koinonia, which has otherwise been important in recent ecclesiological questions, was not much applied by the SC. The comparison of the results of the SC to parallel ecclesiological documents of the WCC (Nature and Mission of the Church, Called to Be the One Church) shows that they all acknowledge the different ecclesiological starting points of the member churches, and, following that, a variety of legitimate views on the relation of the Church to the churches. Despite the change from preserving the koinonia to promises of eschatological koinonia, all the documents affirm that the goal of the ecumenical movement is still full, visible unity.

Synthesis of Cost-Optimal Shell-and-Tube Heat Exchangers

Synthesis of cost-optimal shell-and-tube heat exchangers is a difficult task since it involves a large number of parameters. An attempt is made in this article to simplify the process of choosing the parameter values that will minimize the cost of any heat exchanger satisfying a given heat duty and a particular set of constraints. The simplification is based on decoupling of the geometric and the thermal aspects of the problem. The concept of curves for cost-optimal design is introduced and is shown to simplify the synthesis process for shell-and-tube heat exchangers.