Conception rate of artificially inseminated Holstein cows affected by cloudy vaginal mucus, under intense heat conditions

The objective of this work was to obtain prevalence estimates of cloudy vaginal mucus in artificially inseminated Holstein cows raised under intense heat, in order to assess the effect of meteorological conditions on its occurrence during estrus and to determine its effect on conception rate. In a first study, an association was established between the occurrence of cloudy vaginal mucus during estrus and the conception rate of inseminated cows (18,620 services), raised under intense heat (mean annual temperature of 22°C), at highly technified farms, in the arid region of northern Mexico. In a second study, data from these large dairy operations were used to assess the effect of meteorological conditions throughout the year on the occurrence of cloudy vaginal mucus during artificial insemination (76,899 estruses). The overall rate of estruses with cloudy vaginal mucus was 21.4% (16,470/76,899; 95% confidence interval = 21.1-21.7%). The conception rate of cows with clean vaginal mucus was higher than that of cows with abnormal mucus (30.6 vs. 22%). Prevalence of estruses with cloudy vaginal mucus was strongly dependent on high ambient temperature and markedly higher in May and June. Acceptable conception rates in high milk-yielding Holstein cows can only be obtained with cows showing clear and translucid mucus at artificial insemination.

Political centralization and government accountability

This paper studies fiscal federalism when regions differ in voters' ability to monitor publicofficials. We develop a model of political agency in which rent-seeking politicians providepublic goods to win support from heterogeneously informed voters. In equilibrium, voterinformation increases government accountability but displays decreasing returns. Therefore,political centralization reduces aggregate rent extraction when voter information varies acrossregions. It increases welfare as long as the central government is required to provide publicgoods uniformly across regions. The need for uniformity implies an endogenous trade off between reducing rents through centralization and matching idiosyncratic preferences throughdecentralization. We find that a federal structure with overlapping levels of government canbe optimal only if regional differences in accountability are sufficiently large. The modelpredicts that less informed regions should reap greater benefits when the central governmentsets a uniform policy. Consistent with our theory, we present empirical evidence that lessinformed states enjoyed faster declines in pollution after the 1970 Clean Air Act centralizedenvironmental policy at the federal level.

Effects of particulate matters on inflammatory markers in the general adult population

Summary: Particulate air pollution is associated with increased cardiovascular risk. The induction of systemic inflammation following particle inhalation represents a plausible mechanistic pathway. The purpose of this study was to assess the associations of short-term exposure to ambient particulate matters of aerodynamic diameter less than 10 μm (PM10) with circulating inflammatory markers in 6183 adults in Lausanne, Switzerland. The results show that short-term exposure to PM10 was associated with higher levels of circulating IL-6 and TNF-α. The positive association of PM10 with markers of systemic inflammation materializes the link between air pollution and cardiovascular risk. Background: Variations in short-term exposure to particulate matters (PM) have been repeatedly associated with daily all-cause mortality. Particle-induced inflammation has been postulated to be one of the important mechanisms for increased cardiovascular risk. Experimental in-vitro, in-vivo and controlled human studies suggest that interleukin 6 (IL-6) and tumor-necrosis-factor alpha (TNF-α) could represent key mediators of the inflammatory response to PM. The associations of short-term exposure to ambient PM with circulating inflammatory markers have been inconsistent in studies including specific subgroups so far. The epidemiological evidence linking short-term exposure to ambient PM and systemic inflammation in the general population is scarce. So far, large-scale population-based studies have not explored important inflammatory markers such as IL-6, IL-1β or TNF-α. We therefore analyzed the associations between short-term exposure to ambient PM10 and circulating levels of high-sensitive CRP (hs-CRP), IL-6, IL-1β and TNF-α in the population-based CoLaus study. Objectives: To assess the associations of short-term exposure to ambient particulate matters of aerodynamic diameter less than 10 μm (PM10) with circulating inflammatory markers, including hs-CRP, IL-6, IL-1β and TNF-α, in adults aged 35 to 75 years from the general population. Methodology: All study subjects were participants to the CoLaus study (www.colaus.ch) and the baseline examination was carried out from 2003 to 2006. Overall, 6184 participants were included. For the present analysis, 6183 participants had data on at least one of the four measured circulating inflammatory markers. The monitoring data was obtained from the website of Swiss National Air Pollution Monitoring Network (NABEL). We analyzed data on PM10 as well as outside air temperature, pressure and humidity. Hourly concentrations of PM10 were collected from 1 January 2003 to 31 December 2006. Robust linear regression (PROC ROBUSTREG) was used to evaluate the relationship between cytokine inflammatory and PM10. We adjusted all analyses for age, sex, body mass index, smoking status, alcohol consumption, diabetes status, hypertension status, education levels, zip code, and statin intake. All data were adjusted for the effects of weather by including temperature, barometric pressure, and season as covariates in the adjusted models. We performed simple and multiple logistic regression analyses. Descriptive statistical analysis used the Wilcoxon rank sum test (for medians). All data analyses were performed using SAS software (version 9.2; SAS Institute Inc., Cary, NC, USA), and a two-sided significance level of 5% was used. Results: PM10 levels averaged over 24 hours were significantly and positively associated with continuous IL-6 and TNF-α levels, in the whole study population both in unadjusted and adjusted analyses. For each cytokine, there was a similar seasonal pattern, with wider confidence intervals in summer than during the other seasons, which might partly be due to the smaller number of participants examined in summer. The associations of PM10 with IL-6 and TNF-α were also found after having dichotomized these cytokines into high versus low levels, which suggests that the associations of PM10 with the continuous cytokine levels are very robust to any distributional assumption and to potential outlier values. In contrast with what we observed for continuous IL-1β levels, high PM10 levels were significantly associated with high IL-1β. PM10 was significantly associated with IL-6 and TNF-α in men, but with TNF-α only in women. However, there was no significant statistical interaction between PM10 and sex. For IL-6 and TNF-α, the associations tended to be stronger in younger people, with a significant interaction between PM10 and age groups for IL-6. PM10 was significantly associated with IL-6 and TNF-α in the healthy group and also in the "non-healthy" group, although the statistical interaction between healthy status and PM10 was not significant. Conclusion: In summary, we found significant independent positive associations of short-term exposure to PM10 with circulating levels of IL-6 and TNF-α in the adult population of Lausanne. Our findings strongly support the idea that short-term exposure to PM10 is sufficient to induce systemic inflammation on a broad scale in the general population. From a public health perspective, the reported association of elevated inflammatory cytokines with short-term exposure to PM10 in a city with relatively clean air such as Lausanne supports the importance of limiting urban air pollution levels.

Puhdastilojen suunnitteluprosessi ja teknisten järjestelmien validointi

Puhdastilojen suunnittelussa pyritään saamaan hallittu ja valvottu ilmanpuhtaus luokiteltuun tilaan.Luokittelu tapahtuu puhdastilastandardeilla, lisäksi lääkevalmisteita valmistettavassa tilassa GMP -säädösten mukaisin luokituksin. Puhdastilastandardi ISO 14644 käsittää seitsemän osaa, jossa on käsitelty puhdastilaa koskevia määräyksiä suunnittelusta käyttöön ja testaukseen. GMP-säädökset sisältävät yhdeksän kappaletta, joista kappale 3: 'Tilat ja laitteet' on keskeinen osa lääkeainevalmistuksen puhdastilasuunnittelua. Puhtaan ilman aikaansaamiseksi puhdastilaan merkittävimmät roolit ovat ilmanvaihdolla, puhdastilarakenteilla ja rakennusautomaatiolla. Ilma voidaan tuoda tilaan kolmella eri periaatteella. Ilmaa tuodaan tilaan yhdensuuntaisesti, turbulenttisesti tai sekavirtauksena HEPA -suodattimien kautta, joilla varmistetaan epäpuhtauksien korkea suodatusaste. Ilmapoistetaan rei'itettyjen, korotettujen lattioiden kautta tai tilan alaosassa olevien poistoilmasäleikköjen kautta, josta se johdetaan noin 75-90%:sti kierrätettynä takaisin tilaan. Lääketeollisuudessa rei'itettyjä, korotettuja lattioita eivoida käyttää kontaminaatiovaaran, vuoksi. Tilaan suunniteltuja olosuhteita ylläpidetään rakennusautomaation avulla ja monitorointijärjestelmällä valvotaan tilassa olevan ilman laatua. Kaikki GMP-luokituksen mukaiset puhdastilat tulee validoida. Validointiin kuuluu teknisten järjestelmien kvalifiointi ja koko prosessin validointi. Teknisten järjestel-mien kvalifiointi käsittää suunnitelmien tarkastuksen (DQ), asennus - ja käyttöönotto tarkastukset (IQ), toiminnan testauksen (OQ) ja suorituksen testauksen (PQ). Kvali-fiointi kuuluu yhtenä osa-alueena validointiin. Prosessin validointi on osa yrityksen laadunvarmistusta. Validoinnilla hankitaan dokumentoidut todisteet siitä, että tila tai prosessi todella täyttää annetut vaatimukset. Tässä työssä laadittiin esimerkinomainen kvalifiointisuunnitelma puhdastilan tekni-sille järjestelmille. Suunnitelma sisältää asennus- ja käyttöönoton mukaiset tarkastukset (IQ)ja toiminnan aikaiset testaukset (OQ).

Levylämmönsiirtimen mitoitus ja optimointi erityisesti lämpöpumpuissa

Työn tavoitteena on laatia käsikirjamainen läpileikkaus levylämmönsiirtimen rakenteesta ja käytöstä lämpöpumppulaitteistoissa. Kylmäprosessin tarkastelun lisäksi on eri lähteistä haettu yhtälöitä lämmönsiirron ja painehäviönlaskentaan. Lähdeaineistona on käytetty lämmönsiirron oppikirjoja, joiden lisäksi on käyty läpi suuri joukko tieteellisen tutkimuksen julkaisemia tutkimusraportteja levylämmönsiirtimen mitoituksesta erilaisissa käyttökohteissa. Oppikirjoissa ei ole esitetty varsinaisesti levylämmönsiirtimen laskentamenetelmiä, vaan niissä esitetään lämmönsiirron perusyhtälöt. Varsinainen lämmönsiirtolevyprofiilin laskentaan perustuva lähdeaineisto on löytynyt lämmönsiirtoon erikoistuneista julkaisuista. Lämmönsiirto tapahtuu aina kuumemmasta kylmempään tilaan. Lämmönsiirto eri virtausaineiden välillä toteutetaan lämmönsiirtimien avulla. Lämmönsiirrintyyppejä on olemassa lukuisia, joista yksi yleisesti käytetty tyyppi on levylämmönsiirrin. Tässä konstruktiossa on mahdutettu paljon lämmönsiirtopintaa ulkomitoiltaan pieneen tilaan. Tämä siirrintyyppi on eduksi silloin, kun virtaavat aineet ovat puhtaita ja niillä ei ole likaavaa vaikutusta lämmönsiirtopinnoille. Lämpöpumpulla tarkoitetaan laitetta, jolla voidaan käyttää hyödyksi lämmönlähteen matalaa lämpötilatasoa nostamalla lämpötilatasoa kompressorin puristustyön avulla korkeampaan lämpötilatasoon. Lämpöpumppulaitteiston toiminta perustuu kylmäprosessin toimintaan. Kylmäprosessin läpikäynti auttaa lukijaa hahmottamaan, millainen prosessi on kysymyksessä ja mitä komponentteja liittyy kylmäprosessiin. Tässä diplomityössä esitetyt yhtälöt antavat suuntaa, millä tavalla levylämmönsiirtimien ominaisuuksia voidaan laskea ja mitkä tekijät vaikuttavat siirtimien mitoittamiseen. Tarkemmat vaihdinkohtaiset laskentakorrelaatiot muotoutuvat vasta sitten, kun valmis tuote on testattu laboratorio-olosuhteissa ja siitä on saatu lämpötila-, virtaus- ja painesuhteet selville. Tämän jälkeen voidaan mittaustuloksiin perustuen rakentaa matemaattinen malli, jolla laskennallisesti määritelläänvaihtimien ominaisuudet. Lisäksi on esitetty yleisiä tapoja, joilla voidaan määritellä lämmönsiirtimien lämpöpintoja.

Análisis y creación de un sistema informático de soporte a entidades sanitarias para la detección precoz de brotes de gripe en épocas de máximo riesgo.

Hoy en día, las posibilidades del Big Data son incontables. Existe gran cantidad de información generada por la población general y disponible de forma pública.El reto consiste en poder trabajar con esta información y extraer conclusiones útiles y que generen valor.En este proyecto, queremos analizar en el tiempo el interés general de la población respecto a una enfermedad común como la gripe, y poder relacionarlos con brotes de gripe existentes en el pasado, para de esta manera, poder extrapolar y predecir futuros brotes.Esta información, en manos de las autoridades sanitarias, puede ser de gran ayuda para poder prevenir picos de solicitudes en los servicios de urgencias, anticipándose para gestionar de manera más eficaz los recursos disponibles, consiguiendo, de esta manera, un mejor servicio a la población en general.De esta manera, son los propios usuarios los que, sin saberlo, posibilitan una mayor y mejor respuesta en los servicios sanitarios mediante la información que ellos mismos distribuyen libremente, consiguiéndose de esta manera valiosos beneficios para la población general.

Análisis y creación de un sistema informático de soporte a entidades sanitarias para la detección precoz de brotes de gripe en épocas de máximo riesgo

En este proyecto queremos analizar en el tiempo el interés general de la población respecto a una enfermedad común como la gripe, y poder relacionarlos con brotes de gripe existentes en el pasado, para de esta manera, poder extrapolar y predecir futuros brotes. Esta información, en manos de las autoridades sanitarias, puede ser de gran ayuda para poder prevenir picos de solicitudes en los servicios de urgencias, anticipándose para gestionar de manera más eficaz los recursos disponibles, consiguiendo, de esta manera, un mejor servicio a la población en general.

The Francoist repression in the Catalan Countries

This article offers an overview of Francoist repression in the Catalan Countries from the outbreak of the Civil War to the first decade after the establishment of the dictatorship. It covers both physical violence and measures such as economic repression, imprisonment, professional purges and the social and moral control to which the population as a whole was subjected. First the type of violence and domination exercised by the insurgents in the territories occupied is briefly examined. Then the author offers an account of the events: she commences in the summer of 1936 in Majorca, the only Catalan-speaking territory to remain in rebel hands, then proceeds to the Lleida region, which was occupied in the spring of 1938, and concludes with the final offensive against Catalonia and Valencia, launched in the winter of that same year. Special stress is laid on the repercussions of the 1939 Law of Political Responsibilities and the meaning attached by the occupiers to the pacification and reconstruction of the conquered territories.

Verbrennungen--Von der Bagatelle zur Katastrophe [Burns--from trifle case to mass casualty]

Burn injuries are very frequent, most being trifle cases. Nevertheless every year about 200 patients need to be treated in one of the two specialised Swiss burns centres. Admission criteria are burns > 15% body surface or burns to critical areas (face neck, hands, genitalia, joints) and electrical injuries. The paper reviews the physiophathology of the burn wound which differs depending on the thermal or electrical aetiology. The airway may be threatened due to true inhalation, but also to burns to the face or neck. In major burns >20% body surface in adults, or > 10% in children, fluid resuscitation will be required; oral hydration is generally sufficient by smaller burns. Surgical treatment of 2nd and 3rd degree burns starts within the first 24 days after injury. While complex treatment is generally available in peace time, a major accident such as a disco-fire that can generate hundreds casualties in a few minutes, can threaten our system and force the adoption of triage rules, and simplified treatments. Attitudes to adopt in such conditions are discussed.

La democratización de la investigación biomédica

La tecnociencia biomédica debe abrir sus puertas a la democracia. El poder político y el derecho deben redefinir sus relaciones con la tecnociencia para que los científicos, expertos y ejecutivos de las empresas tecnocientíficas no sigan teniendo sólo en sus manos las decisiones sobre la orientación de las investigaciones y las prioridades científico-tecnológicas. La política de la ciencia y sus aplicaciones técnicas deben abrirse a la participación ciudadana, pasar a formar parte de la opinión pública y a ser tratados como asuntos transversales de las políticas públicas. Para ello es necesario que el principio democrático se instale en el seno de la tecnociencia. La libertad de investigación no es incompatible con el hecho de que las decisiones sobre la política científica sean, además de responsables, participativas y transparentes.

In this issue.

What do we have on the menu this month? Two of the highlighted papers focus on intra-operative diagnosis. Matthaei et al. [1] report on the occurrence of biliary tract intraepithelial neoplasia (BilIN) in the resection margins of biliary tract cancer resection specimens. The group found BilIN, mostly low grade, in the margin of over half of the specimens. BilIN was most frequent in resection specimens of extrahepatic cholangiocarcinoma and when the primary tumor was large and had lymphovascular and perineural invasion. Not surprisingly, patients with a resection margin positive for invasive cancer had a significantly shorter overall survival than those with a clean resection margin, but the presence of BilIN did not affect survival. The take-home message of the paper is that those of us regularly confronted with frozen sections of resection margins of biliary tract cancer specimens should be prepared to find BilIN, but this diagnosis should not make the surgeon perform additional resect ...

Micronization of Pharmaceuticals and Food Ingredients using Supercritical Fluid Techniques

Micronization techniques based on supercritical fluids (SCFs) are promising for the production of particles with controlled size and distribution. The interest of the pharmaceutical field in the development of SCF techniques is increasing due to the need for clean processes, reduced consumption of energy, and to their several possible applications. The food field is still far from the application of SCF micronization techniques, but there is increasing interest mainly for the processing of products with high added value. The aim of this study is to use SCF micronization techniques for the production of particles of pharmaceuticals and food ingredients with controlled particle size and morphology, and to look at their production on semi-industrial scale. The results obtained are also used to understand the processes from the perspective of broader application within the pharmaceutical and food industries. Certain pharmaceuticals, a biopolymer and a food ingredient have been tested using supercritical antisolvent micronization (SAS) or supercritical assisted atomization (SAA) techniques. The reproducibility of the SAS technique has been studied using physically different apparatuses and on both laboratory and semi-industrial scale. Moreover, a comparison between semi-continuous and batch mode has been performed. The behaviour of the system during the SAS process has been observed using a windowed precipitation vessel. The micronized powders have been characterized by particle size and distribution, morphology and crystallinity. Several analyses have been performed to verify if the SCF process modified the structure of the compound or caused degradation or contamination of the product. The different powder morphologies obtained have been linked to the position of the process operating point with respect to the vapour-liquid equilibrium (VLE) of the systems studied, that is, mainly to the position of the mixture critical point (MCP) of the mixture. Spherical micro, submicro- and nanoparticles, expanded microparticles (balloons) and crystals were obtained by SAS. The obtained particles were amorphous or with different degrees of crystallinity and, in some cases, had different pseudo-polymorphic or polymorphic forms. A compound that could not be processed using SAS was micronized by SAA, and amorphous particles were obtained, stable in vials at room temperature. The SCF micronization techniques studied proved to be effective and versatile for the production of particles for several uses. Furthermore, the findings of this study and the acquired knowledge of the proposed processes can allow a more conscious application of SCF techniques to obtain products with the desired characteristics and enable the use of their principles for broader applications.

Angular distributions of leptons from J/ ψ's produced in 920 GeV fixed-target proton-nucleus collisions

A study of the angular distributions of leptons from decays of J/ψ"s produced in p-C and p-W collisions at s√=41.6~GeV has been performed in the J/ψ Feynman-x region −0.34clean selection of 2.3×105 J/ψ"s reconstructed in both the e + e − and μ + μ − decay channels, indicate that J/ψ"s are produced polarized. The magnitude of the effect is maximal at low p T . For p T >1 GeV/c a significant dependence on the reference frame is found: the polar anisotropy is more pronounced in the Collins-Soper frame and almost vanishes in the helicity frame, where, instead, a significant azimuthal anisotropy arises.

Drumming in immersive virtual reality: the body shapes the way we play

It has been shown that it is possible to generate perceptual illusions of ownership in immersive virtual reality (IVR) over a virtual body seen from first person perspective, in other words over a body that visually substitutes the person's real body. This can occur even when the virtual body is quite different in appearance from the person's real body. However, investigation of the psychological, behavioral and attitudinal consequences of such body transformations remains an interesting problem with much to be discovered. Thirty six Caucasian people participated in a between-groups experiment where they played a West-African Djembe hand drum while immersed in IVR and with a virtual body that substituted their own. The virtual hand drum was registered with a physical drum. They were alongside a virtual character that played a drum in a supporting, accompanying role. In a baseline condition participants were represented only by plainly shaded white hands, so that they were able merely to play. In the experimental condition they were represented either by a casually dressed dark-skinned virtual body (Casual Dark-Skinned - CD) or by a formal suited light-skinned body (Formal Light-Skinned - FL). Although participants of both groups experienced a strong body ownership illusion towards the virtual body, only those with the CD representation showed significant increases in their movement patterns for drumming compared to the baseline condition and compared with those embodied in the FL body. Moreover, the stronger the illusion of body ownership in the CD condition, the greater this behavioral change. A path analysis showed that the observed behavioral changes were a function of the strength of the illusion of body ownership towards the virtual body and its perceived appropriateness for the drumming task. These results demonstrate that full body ownership illusions can lead to substantial behavioral and possibly cognitive changes depending on the appearance of the virtual body. This could be important for many applications such as learning, education, training, psychotherapy and rehabilitation using IVR.

Lajinvaihtoaikojen minimointi pakastetehtaassa

Diplomityön tarkoituksena oli selvittää miten lajinvaihtoaikoja voidaan vähentää ryhmittäin pakasteleipomossa. Työn osatavoitteina oli jakaa tuotteet ryhmiin sekä selvittää todellinen vaihtoaika kuuden kuukauden ajalta, jolloin saatiin työhön tarvittava vertailuaineisto. Työ rajattiin koskemaan vain yrityksen tehokkainta linjaa, koska siinä valmistetaan eniten tuotteita. Linjan tuotteet jaettiin ryhmiin erilaisten ominaisuuksien perusteella. Vaihtoaikojen lyhennyksessä sovellettiin eri teorioita. Tärkeimpinä teorioina voidaan mainita Shigeo Shingon kehittämä SMED-menetelmä, 5S-prosessi ja ryhmäanalyysi. SMED-menetelmän tavoitteena on jakaa asetukset sisäisiin ja ulkoisiin asetuksiin ja erottaa ne toisistaan. Tavoitteena on myös siirtää sisäisiä asetuksia ulkoisiksi. 5S-prosessi on visuaalista johtamista, jonka tavoitteena on pitää työympäristö siistinä. Ryhmäanalyysissä tuotteet jaetaan ensin ryhmiin j a sen jälkeen tuotteet laitetaan ryhmien sisällä parhaaseen mahdolliseen ajojärjestykseen. Tämän jälkeen ryhmät laitetaan keskenään parhaaseen ajojärjestykseen. Työn tavoitteena oli vähentää vaihtoaikaa viisi prosenttia tuotannon kokonaisajasta sekä tehdä kehityssuunnitelma, jonka avulla voidaan vähentää vaihtoaikoja kohdeyrityksen muilla linjoilla. Kokeilujen jälkeen kohdelinjan keskimääräinen viikoittainen vaihtoaika lyheni 1,1 % ja keskimääräisen vaihdon pituus lyheni 19 minuuttia. Tulosten perusteella kehitettiin kahdeksankohtainen kehityssuunnitelma.