Ocean distribution of the American shad (Alosa sapidissima) along the Pacific coast of North America

We examined the incidental catches of American shad (Alosa sapidissima) taken during research cruises and in commercial and recreational landings along the Pacific coast of North America during over 30 years of sampling. Shad, an introduced species, was mainly found over the shallow continental shelf, and largest catches and highest frequency of occurrences were found north of central Oregon, along the coasts of Washington and Vancouver Island, and in California around San Francisco Bay. Migrations to the north off Washington and Vancouver were seen during spring to fall, but we found no evidence for large-scale seasonal migrations to the south during the fall or winter. The average weight of shad increased in deeper water. Sizes were also larger in early years of the study. Most were caught over a wide range of sea surface temperatures (11–17°C) and bottom temperatures (6.4–8.0°C). Abundance of shad on the continental shelf north of 44°N was highly correlated with counts of shad at Bonneville Dam on the Columbia River in the same year. Counts were negatively related to average weights and also negatively correlated with the survival of hatchery coho salmon (Oncorhynchus kisutch), indicating that survival of shad is favored by warm ocean conditions. Examining the catch during research cruises and commercial and recreational landings, we concluded that American shad along the Pacific coast have adapted to the prevailing environmental conditions and undertake only moderate seasonal migrations compared with the long seasonal migrations of shad along the Atlantic coast of North America. We suggest that the large spawning populations in the Columbia River and San Francisco Bay areas explain most of the distributional features along the Pacific coast.

Movement patterns of winter flounder (Pseudopleuronectes americanus) in the southern Gulf of Maine: observations with the use of passive acoustic telemetry

Despite its recreational and commercial importance, the movement patterns and spawning habitats of winter flounder (Pseudopleuronectes americanus) in the Gulf of Maine are poorly understood. To address these uncertainties, 72 adult winter flounder (27–48 cm) were fitted with acoustic transmitters and tracked by passive telemetry in the southern Gulf of Maine between 2007 and 2009. Two sympatric contingents of adult winter flounder were observed, which exhibited divergent spawning migrations. One contingent remained in coastal waters during the spawning season, while a smaller contingent of winter flounder was observed migrating to estuarine habitats. Estuarine residence times were highly variable, and ranged from 2 to 91 days (mean=28 days). Flounder were nearly absent from the estuary during the fall and winter months and were most abundant in the estuary from late spring to early summer. The observed seasonal movements appeared to be strongly related to water temperature. This is the first study to investigate the seasonal distribution, migration, and spawning behavior of adult winter flounder in the Gulf of Maine by using passive acoustic telemetry. This approach offered valuable insight into the life history of this species in nearshore and estuarine habitats and improved the information available for the conservation and management of this species.

Depredation of catch by bottlenose dolphins (Tursiops truncatus) in the Florida king mackerel (Scomberomorus cavalla) troll fishery

We documented depredation by bottlenose dolphins (Tursiops truncatus) in the Florida king mackerel (Scomberomorus cavalla) troll fishery. Between March and June 2003, we conducted 26 interviews of charter and commercial fishermen in Islamorada, Florida, and 23 along Florida’s east coast from Fort Pierce south to Lake Worth Inlet. All fishermen indicated they had observed bottlenose dolphins depredating bait or catch—king mackerel being the species most often taken by dolphins. During on-board observations of depredation between March and June 2003, we found that dolphins took 6% of king mackerel caught by charter fishermen and 20% of fish caught by commercial fishermen. We concluded that depredation by bottlenose dolphin occurs commonly in this fishery and has the potential to incur a significant economic cost to king mackerel fishermen. To address this concern, we conducted preliminary tests of a gear modification designed to reduce depredation in the king mackerel fishery between December 2003 and January 2004. These tests demonstrated that a modification to the outrigger planer will successfully deter bottlenose dolphins from engaging in depredation, without causing a reduction in ca

Local solutions to challenges of West Indian Ocean fisheries development

The West Indian Ocean is rich in biodiversity and marine resources. This paper gives an overview of fisheries development and resource management in the region. There are many shared issues that must be addressed within countries and at the regional level. These are illustrated by examples from three countries. In Mozambique the issues of lack of information about artisanal fisheries, excessive harvesting of juveniles and conflicts between artisanal and commercial sectors are highlighted. Elements in addressing this include targeted research and decision-making support tools. The challenges faced in Somalia stem primarily from the political instability that contributed to an absence of sound fisheries policy. An example of a highly participatory process to develop the policy provides a model for other countries. In Tanzania, the issue of dynamite fishing was addressed by local communities initiating a program to promote wise use of the resources. There is a clear opportunity for better collaboration and greater integration of fisheries research and management on a regional basis. There is also much to be learnt by the sharing of experiences between countries. This has been initiated by some recently launched regional cooperation projects, but there are still many challenges facing this region.

Government-Industry Cooperative Fisheries Research in the North Pacific under the MSFCMA

The National Marine Fisheries Service’s Alaska Fisheries Science Center (AFSC) has a long and successful history of conducting research in cooperation with the fishing industry. Many of the AFSC’s annual resource assessment surveys are carried out aboard chartered commercial vessels and the skill and experience of captains and crew are integral to the success of this work. Fishing companies have been contracted to provide vessels and expertise for many different types of research, including testing and evaluation of survey and commercial fishing gear and development of improved methods for estimating commercial catch quantity and composition. AFSC scientists have also participated in a number of industry-initiated research projects including development of selective fishing gears for bycatch reduction and evaluating and improving observer catch composition sampling. In this paper, we describe the legal and regulatory provisions for these types of cooperative work and present examples to illustrate the process and identify the requirements for successful cooperative research.

Artificial Habitats for Fisheries Enhancement in the Australian Region

This paper outlines developments over about 20 years in the construction of and ecological research on artificial reefs, fish aggregation devices (FAD's), and other artificial habitats designed to enhance fish populations and fisheries in the Australian region (including New Zealand and Papua New Guinea). Work was initially carried out on multicomponent reefs using a variety of waste materials, as well as some specially constructed concrete and steel structures. Later studies concentrated on single-component reefs, again mainly using waste materials. Although no definitive conclusions were reached on the relative effectiveness of the different materials used, waste motor vehicle tires and derelict ships were generally judged to be the best all-around materials for single-component reef construction in sheltered estuarine and offshore marine environments, respectively, in this region. FAD's comprising polyvinylchloride pipe sparbuoys (or in some areas polyurethane foam floats) attached to railroad car wheel anchors by polyethylene rope and chain, and supporting attractor drapes of synthetic mesh webbing, also provedtobegenerallysuccessfulin thisarea. Overall conclusions for the Australian region include the predominant use of waste materials in artificial reef construction, which has been primarily aimed at recreational fisheries enhancement; the successful use of FAD's for both recreational and commercial fisheries enhancement; the need for further and better planned research into and monitoring of the effectiveness of both of these enhancement methods; and the need for future research into the effectiveness of unfished "artificial habitat reserves" in enhancing fisheries production from surrounding fished areas.

The Driftnet Fishery in the Fort Pierce-Port Salerno Area off Southeast Florida

From May through September 1987, observations were made on 38 trips in the driftnet fishery off the Fort Pierce-Port Salerno area off southeast Florida. Of the number and weight of fish landed on observed trips, 91.6 percent consisted of king mackerel, Scomberomorus cavalla, the targeted species. Over 33 species of fishes were observed among the discarded by-catch. The most frequently occurring species in the discards was little tunny, Euthynnus alletteratus, which made up 67.0 percent by number of the discarded by-catch. Total landings for all commercial gear from Saint Lucie and Martin counties (the counties of the study area) increased 516,741 pounds from 1986 to 1987. In 1986, 55 percent of the catch was from handline and 45 percent from driftnet landings. In 1987, 78 percent was from driftnet and 22 percent from handline landings. A comparison of lengths from recreational and commercial landings showed recreationally caught fish to be, on the average, smaller. No marine mammals, birds, or turtles were entangled in the net on observed trips. Data on cost of nets. fuel, and supplies plus the distribution of earnings among the crew were obtained for five driftnet boats.

Substratos para uso em telhados verdes: Avaliação da retenção hídrica e qualidade da água de escoamento.

Telhados verdes são uma alternativa interessante para mitigar o risco de enchentes dada a enorme área de telhados não utilizada das superfícies impermeáveis nas áreas urbanas. Graças a sua capacidade de armazenagem de água, os telhados verdes podem reduzir significativamente o pico de escoamento dos eventos de maior pluviosidade. Investigações sobre a composição de substratos baseados em materiais locais e projetos adequados para regiões climáticas tropicais são menos frequentes. Vegetação e substrato são elementos de um telhado verde que precisam ser adaptados para cada microclima e não universalizados. O objetivo deste estudo foi avaliar o desempenho de diferentes composições de substratos baseados em solo local, biomassa de coco, condicionador de solo e componentes comerciais, com a finalidade de maximizar a capacidade de retenção da água de chuva e diminuir necessidades de manutenção. Um pré-ensaio de colunas avaliou a capacidade de retenção hídrica e a relação peso seco x peso úmido de 15 composições de substrato. As composições com melhores resultados constituíram os substratos S1(15% solo + 55% coco + 30%componentes comerciais), S2 (30% solo + 40% coco + 30%componentes comerciais) e S3 (60% solo + 10% coco + 30%componentes comerciais). A caracterização físico-química dos substratos, solo e fibra de coco foi realizada. Em seguida um teste de colunas avaliou a capacidade de retenção hídrica dos substratos sob duas condições de precipitação: uma leve (8,77 mm/h); e outra mais forte (42,0 mm/h). Os resultados apontaram que os substratos S2 e S3 apresentaram melhores resultados de retenção para ambas as intensidades de precipitação. Observou-se que S1, que apresentou melhor capacidade de retenção no pré-ensaio, teve desempenho inferior aos demais o que pode ser atribuído à maior concentração de fibra de coco na sua composição e o consequente surgimento de caminhos preferenciais ao longo do perfil da coluna, por onde a água escoou mais rapidamente. Em eventos de precipitação mais leve, os substratos reteram de 60 a 100% do total aplicado. Quando se aplicou uma intensidade de precipitação mais forte, a faixa de retenção ficou entre 40% e 59%. No entanto, as variáveis analisadas para avaliar a qualidade da água de escoamento dos substratos (pH, CE, P, NO3, NH4, Ca, Mg, Cu, Fe, Mn, Zn, Cr, Co, Ni) ficaram acima dos valores comumente encontrados na literatura, indicando que as composições aqui adotadas para os substratos podem implicar em uma fonte de poluição hídrica. Os substratos para uso em telhados verdes apresentados neste estudo atenderam seu objetivo quanto à retenção hídrica, mas a qualidade da água percolada torna seu uso inviável até o momento. Verificou-se a necessidade de estudar mais profundamente a qualidade da água lixiviada por cada componente dos substratos, individualmente, a fim de identificar as fontes dos elementos que presentes em concentrações elevadas tornam-se poluentes. Pode ser considerada a remoção de algum (s) dos componentes presentes na composição para se atingir um nível satisfatório de qualidade da água de escoamento.

Os investimentos estrangeiros e comércio internacional: uma análise comparativa e sua complementaridade

O comércio internacional vem desempenhando um papel cada vez mais vital no cenário da economia mundial. O fluxo de investimentos estrangeiros vem crescendo exponencialmente com potencial de gerar desenvolvimento econômico e oportunidades de lucro para os investidores. O crescimento da importância dessas duas disciplinas desafia as regras do Direito Internacional. Por um lado, o Direito Internacional dos Investimentos objeto de críticas em virtude da fragmentação normativa gerada pelo bilateralismo. Por outro lado, o Direito do Comércio Internacional consagrado através do multilateralismo da Organização Mundial do Comércio considerado, por muitos, como ultrapassado. As tentativas de regular em nível multilateral os investimentos estrangeiros restaram fracassadas e o existente sistema multilateral no comércio internacional rechaçado. Nessa dualidade entre investimentos estrangeiros e comércio internacional resta duvidoso o seu caráter de complementaridade. No entanto, a crescente e inegável interconexão entre investimentos estrangeiros e comércio internacional não somente representa um desenvolvimento para o panorama normativo de ambos, como também, contribui para o crescimento do padrão de tratamento, desenvolvimento econômico e trocas comerciais. Deixa de se tratar de uma relação entre duas disciplinas isoladas que, na verdade, são elementos complementares que devem ser desenvolvidos em conjunto para um crescimento econômico mais avançado e um desenvolvimento contributivo.

Desenvolvimento e produção de metabólitos de arruda (Ruta graveolens L.) exposta a substratos contaminados por hidrocarbonetos de petróleo

A indução da síntese de moléculas biologicamente ativas é conhecida como uma estratégia de defesa do organismo vegetal às condições adversas, onde plantas medicinais e/ou aromáticas são foco de pesquisa na terapêutica médica, na indústria farmacêutica, de cosméticos e de alimentos. A possibilidade de que os hidrocarbonetos de petróleo presentes no solo possam agir como agentes elicitores do metabolismo vegetal tem despertado interesse científico. O presente trabalho teve como objetivo avaliar o desenvolvimento in vivo e in vitro de Ruta graveolens L. (Rutaceae), considerando as respostas morfológicas e metabólicas na presença de petróleo e derivados. Além disso, verificar o potencial de desenvolvimento dessa espécie em áreas contaminadas, com base na hipótese de que tais substâncias podem influenciar na produção de substâncias de interesse, sem que haja redução significativa da biomassa vegetal. Foram realizados experimentos de (i) germinação in vivo em solo contaminado e parcialmente biorremediado, assim como solo com contaminação recente com óleo cru (0,8 % e 2,8 %) e diesel comercial S50 (0 % a 6,0 %), sendo que neste último foi avaliado o desenvolvimento e a produção de biomassa das plântulas; (ii) germinação in vitro em meio MS contaminado com fenantreno (1,0; 5,0 e 10,0 mg/L de meio) ou benzo[a]pireno (0,001; 0,010 e 0,100 mg/L de meio), sendo avaliado o desenvolvimento e a produção de biomassa; e (iii) resposta fisiológica de plantas oriundas do estoque in vitro à exposição de fenantreno ou benzo[a]pireno. R. graveolens teve redução significativa da germinação em solos contaminados, principalmente os solos parcialmente biorremediados pelo do processo de bioestímulo; não teve redução significativa da germinação in vivo nos solos contaminados com óleo cru, biorremediado e contaminado com diesel, porém o desenvolvimento pósgerminação foi afetado. Na exposição in vitro aos hidrocarbonetos, não houve alteração significativa na germinação nem na capacidade de desenvolvimento e produção de biomassa nas concentrações testadas de até 10 mg/L de fenantreno e até 0,1 mg/L de benzo[a]pireno. Em relação à propagação in vitro, foi possível a multiplicação de plantas em meio de cultura sem suplementação hormonal, na presença dos contaminantes. A presença de fenantreno e benzo[a]pireno in vitro não promoveu mudanças significativas nos níveis de compostos fenólicos e flavonoides totais produzidos, não havendo também alteração no perfil fitoquímico da espécie, quanto à presença de rutina. Pelo exposto, conclui-se que a espécie tem potencial para uso em biomonitoramento de solos contaminados , considerando a sua capacidade de produzir metabólitos e tolerar a presença dos hidrocarbonetos selecionados, sendo indicada ao cultivo em áreas contaminadas nos níveis investigados

Propriedades mecânicas e análise térmica de resíduos de polietileno de alta densidade (PEAD) reciclado

Atualmente grande parte dos resíduos descartados rotineiramente no Brasil é composta por material plástico como, por exemplo, o polietileno de alta densidade (PEAD), o qual é muito comum no lixo doméstico. Nesta Dissertação, embalagens de PEAD pós-consumo foram coletadas e moídas. Após processamento em extrusora, o material definido como PEAD reciclado (mistura de embalagens brancas, marfins e incolores) foi injetado e as propriedades mecânicas foram avaliadas e comparadas com uma amostra de PEAD comercial (HD7600U). A análise térmica através da calorimetria exploratória diferencial (DSC), em conjunto com a análise estatística dos resultados experimentais, também foi conduzida. Em relação à resistência à tração, a diferença entre as amostras de PEAD reciclado e PEAD comercial foram tão pouco expressivas que, dentro das condições experimentais adotadas, se pode afirmar que o material reciclado é equivalente ao comercial.Por sua vez, os modelos cinéticos aplicados na análise térmica revelaram quea amostra de PEAD comercial demonstra um processo de nucleação e crescimento dos cristais mais homogêneo e simples, embora a energia de ativação seja consideravelmente maior do que o das demais amostras de PEAD.

Strengthening collective action to address resource conflict in Lake Kariba, Zambia

Where natural resources are a key component of the rural economy, the ability of the poor to realize their visions for the future depends significantly on institutional structures that govern resource access and management. This case study reports on an initiative on the shores of Lake Kariba in Zambia, where lakeshore residents face competition over fishing, tourism, and commercial aquaculture. Multistakeholder dialogue produced agreements with investors and increased accountability of state agencies and traditional leaders, enabling communities to have greater influence over their futures through improvements in aquatic resource governance. The report documents the rationale for the approach followed and steps in the capacity-building process, discusses obstacles encountered, and identifies lessons for policymakers and practitioners seeking to implement a similar approach.

Factors controlling sterility in canned prawn

Probable sources of contamination of raw, blanched and processed meat at various stages of handling and methods for their rectification have been described in the paper. Inter-relationship between absolute sterility and commercial sterility with particular reference to the sanitation of the factory has been discussed.

Report of Catch Assessment Survey of Lake Albert – Albert Nile conducted in July 2012

A Catch Assessment Surveys (CAS) with the overall objective of generating information on the fish production and commercial value of the fisheries of Lake Albert and Albert Nile system was implemented by the National Fisheries Resources Research Institute (NAFIRRI) in collaboration with the Department of Fisheries Resources (DFR), Local Government staff (FOs) and BMU members at selected landing sites on Lake Albert (12 landing sites) and Albert Nile (26 landing sites) in July 2012. A total 622 and 313 boat days on Lake Albert and Albert Nile respectively were sampled for a period of 9 days. Results indicate an annual landing of 151,600 and 5,900 tonnes (t) of fish with an estimated beach value of 122.5 and 14 Billion (UShs) from Lake Albert and Albert Nile respectively. Over 80% of the catch from Lake Albert comprised the small pelagic species; Neobola bredoi (Muziri) and Brycinus nurse (Ragoogi) followed by Nile perch (6%). However, due to low market value of the small fishes and the high prices attached to Nile perch for industrial processing and export market, the contribution of the latter to beach value rose to 34% of the total. The contribution of the light fishery based on small pelagic species (B. nurse and N. bredoi) are insignificant on Albert Nile. Even if the small pelagic species may be present in the river system, a light fishery based on these two is yet to be developed. Proportionally, Albert Nile still remain a multispecies fishery with over 20 fish species harvested commercially. Interestingly, the Albert Nile fishery still remains primitive with simple crafts and gears (mainly dugout canoes, traps, and gillnets). This could suggest that the more developed the system becomes the higher the level of transformation in its fisheries leading to simplification, characterized by reduction in multispecies nature and dominance of few species. Illegal gears especially undersized gillnet of mesh size less than 4 inches were the most dominant in the Lake Albert and Albert Nile fisheries. They captured large quantities of immature fish particularly when used to target Nile perch, Bagrus, Nile tilapia, and large Barbus spp. Their impact when used to target the smaller species (Ragoogi, Angara & Ngasia) is yet to be evaluated. A specific study to analyze selectivity and impacts of these nets is a recommended. However, the dominance of 1.5” mesh sizes especially on Albert Nile to target Angara, Ngassia and Barbus, is definitely destructive to their fisheries and should be checked forthwith. In addition, there is an emerging fishing method locally referred to as “Salsio or Luzira” whereby fishers stay on the lake from 3 days up to 2 weeks without returning to the landing site. They carry with them food and salt for processing the catches on the lake, and in the case of Albert Nile on make shift shelters on islands and in the game park. They normally use gillnets of 3-3½ inch mesh size and caught mainly Nile perch & Bagrus (Pethi & Munama). On return they land several tons of fish. Most of these Catches are not captured in the estimates presented in our analyses since we target daily fishing boats. The possible impacts of this fishing method should be studied and appropriate action recommended.

Tribological properties of mems materials measured on a small-scale device

Micro-electro-mechanical systems, MEMS, is a rapidly growing interdisciplinary technology within the general field of Micro-Systems Technology which deals with the design and manufacture of miniaturised machines with major dimensions at the scale of tens, to perhaps hundreds, of microns. Because they depend on the cube of a representative dimension, component masses and inertias rapidly become small as size decreases whereas surface and tribological effects, which often depend on area, become increasingly important. Although MEMS components and their areas of contact are small, tribological conditions, measured by contact pressures or acceptable wear rates, are demanding and technical and commercial success will require careful measurement and precise control of surface topography and properties. Fabrication of small numbers of MEMS devices designed to test potential material combinations can be prohibitively expensive and thus there is a need for small scale test facilities which mimic the contact conditions within a micro-machine without themselves requiring processing within a full semiconductor foundry. The talk will illustrate some initial experimental results from a small-scale experimental device which meets these requirements, examining in particular the performance of Diamond-Like-Carbon coatings on a silicon substrate. Copyright © 2005 by ASME.