Use of raw Euphorbia tirucalli extract for inhibition of ascitic Ehrlich tumor

Objective: to evaluate the effect of the Euphorbia tirucalli hydroalcoholic extract (ETHE) on the development of Ehrlich Tumor, in its ascitic form. Methods: we intraperitoneally inoculated 15 Swiss mice with 10.44 x 107 cells of Ehrlich Tumor and divided them in two groups one day after: ETHE Group (eight mice), treated with a dosage of 125 mg/kg/day of EHTE for five days; and Control Group (seven mice), treated only with 0.9% isotonic saline solution over the same period. The treatment was done by gavage. Ten days after inoculation, four mice from each group were sacrificed for quantification of tumor cell number, ascitic fluid volume and bone marrow cell number. The remaining animals were maintained to evaluate survival. Results: The ascitic fluid volume and the tumor cell number were decreased in the ETHE group when compared with the control group, but with no statistical significance. On the other hand, survival was higher in the ETHE group, as well as the number of bone marrow cells. Conclusion: Treatment with ETHE after inoculation of Ehrlich Tumor decreases its development and increases survival and the bone marrow cellularity, thus reducing the myelosuppression present in the Ehrlich Tumor bearing mice.

Organophosphorus and carbamates residues in milk and feedstuff supplied to dairy cattle

Considering acute and chronic toxicity effects on human and animal health caused by pesticide residues in food, this study aimed to analyze organophosphorate (OP) and carbamate (CB) in feedstuff and water destined for dairy cattle, as well as in the milk produced by these animals, through gas chromatography (GC). In the Agreste region of Pernambuco, Brazil, 30 raw milk samples and all components of the animals' diet were collected from several farms. Out of the 30 milk of milk analyzed, six (20%) were contaminated with OP, five (16.7%) with CB, and one sample with both pesticides. From 48 analyzed feed samples, 15 (31.25%) were contaminated with residues of OP, six (12.50%) with CB, and one sample was contaminated with both pesticides. Out of 16 water samples analyzed, six (37.50%) were contaminated with OP residues, but non with CB. In four dairy farms the pesticides detected in milk were compatible with the active principles found in water and/or foodstuff, suggesting them to be the source of contamination.

Conditioned food aversion to Ipomoea carnea var. fistulosa induced by Baccharis coridifolia in goats

Baccharis coridifolia is a plant that induces strong conditioned food aversion in ruminants. This research aimed to induce a conditioned food aversion to Ipomoea carnea var. fistulosa in goats, using B. coridifolia as an aversive agent, and to compare the aversion induced by this plant with the aversion induced by lithium chloride (LiCl). Thirteen goats were allotted into two groups: Group 1 with six goats was averted with 175mg/kg of body weight of LiCl and Group 2 with seven goats was averted with 0,25g/kg of bw of dried B. coridifolia. All goats were averted on day 1 after the ingestion of I. carnea. The aversion procedure with LiCl or B. coridifolia in goats from Groups 1 and 2, respectively, was repeated in those goats that again consumed the plant during tests on days 2, 3, and 7. The goats of both groups were challenged in pens on 23 and 38 days after the last day of aversion and challenged in the pasture on days 11, 15, 18, 20, 22, 25, 27 and 29 after the last day of aversion. After this period goats were challenged every 15 days on pasture until the 330º day after the last day of aversion (7th day). Two goats from Group 1 ingested I. carnea on the first day of the pasture challenge, 4 days after the last day of aversive conditioning in the pen. In addition, another goat in Group 1 started to consume the plant on day 18, and other two goats ate it on day 20. One goat in Group 1 that had never eaten I. carnea died on day 155. One goat from Group 2 started to ingest I. carnea on the first day of the pasture challenge, and a second goat started to consume this plant on day 182. At the end of the experiment, on day 330, the other five goats averted with B. coridifolia remained averted. These results suggest that B. coridifolia or an active compound from the plant could be used to induce aversion to toxic plants. Using B. coridifolia would be cheaper and, particularly in flocks with large number of animals, possibly easier than using LiCl, which requires the use of oral gavage and qualified personnel for its implementation.

CS discourses of co-operatives structuring the food industry

Tämä tutkimus osallistuu tuottaja-osuuskuntiin liittyviin kestävän kehityksen keskusteluihin ja tarjoaa esimerkin pohjoismaisesta ruoantuotannon toimialasta. Tämä tutkimus seuraa kvalitatiivisen tutkimuksen suuntaviivoja ja Fairclough’n kriittinen diskurssianalyysi tarjoaa metodin yritystekstien analyysille. Kieli ymmärretään poststrukturalistisesta näkökulmasta, joka luo kielellisiä identiteettejä ja rakentaa vastuullisuuskeskustelua. Tutkimuksen tavoitteena on kuvata diskurssit, jotka rakentavat vastuullisuuskeskustelua kontekstissaan. Lisäksi tavoitteena on kuvata ja ymmärtää kuinka nämä diskurssit rakentavat rooleja ja identiteettejä ympärilleen sekä kuinka yritystekstit institutionalisoituvat ja vaikuttavat kontekstiinsa. Analyysi määrittää kolme vastuullisuusdiskurssia, jotka kuvaavat yrityskansalaisuutta, liiketoimintalähtöisyyttä ja integriteettiä. Diskurssien tavoitteiden, roolien, ja identiteettien ymmärrys ja vaikutus ympäristöön auttaa laajentamaan tietämystä kestävän kehityksen moniulotteisesta luonteesta. Lisäksi tutkimus muodostaa itsessään äänen osuuskuntatutkimukselle ja kestävän kehityksen ymmärryksen laajentamiselle.

Internationalization of SMEs in the Finnish Food Industry

Food industry in Finland has a long tradition and the new trends and the future of Finnish food industry is going towards functional and healthy food for the consumers in and outside Finland. Small companies operating in this industry face many difficulties in trying to compete and expand to new markets, that is why these companies are the key of innovation and they have done many breakthroughs in the food industry as well. It is therefore important to understand the internationalization process these companies follow and entry strategies they use, and moreover how they use their limited resources in order to be successful in international markets. This thesis via a case study approach deals with the issue of internationalization of SMEs and Finnish food industry. This study supports earlier theories of internationalization, primarily the Uppsala model and acknowledges internationalization as an incremental process. Meaning that psychic distance is indeed the major barrier of internationalization, and acquisition of international knowledge requires significant amount of time which influences the level of resource-commitment in foreign markets. It follows that due to the risks involved in foreign markets, the least resource-intensive modes of market entry such as direct and indirect exports are generally preferred at the start of internationalization process. As of what explains the non-conventional rapid internationalization process, we conclude that in an internationalized industry and country with established trade flows like Finland, the context in which firms operate may be less significant than the varying level of entrepreneurial skills and confidence present therein.

Hydrometallurgical recovery of valuable metals from secondary raw materials

Wastes and side streams in the mining industry and different anthropogenic wastes often contain valuable metals in such concentrations their recovery may be economically viable. These raw materials are collectively called secondary raw materials. The recovery of metals from these materials is also environmentally favorable, since many of the metals, for example heavy metals, are hazardous to the environment. This has been noticed in legislative bodies, and strict regulations for handling both mining and anthropogenic wastes have been developed, mainly in the last decade. In the mining and metallurgy industry, important secondary raw materials include, for example, steelmaking dusts (recoverable metals e.g. Zn and Mo), zinc plant residues (Ag, Au, Ga, Ge, In) and waste slurry from Bayer process alumina production (Ga, REE, Ti, V). From anthropogenic wastes, waste electrical and electronic equipment (WEEE), among them LCD screens and fluorescent lamps, are clearly the most important from a metals recovery point of view. Metals that are commonly recovered from WEEE include, for example, Ag, Au, Cu, Pd and Pt. In LCD screens indium, and in fluorescent lamps, REEs, are possible target metals. Hydrometallurgical processing routes are highly suitable for the treatment of complex and/or low grade raw materials, as secondary raw materials often are. These solid or liquid raw materials often contain large amounts of base metals, for example. Thus, in order to recover valuable metals, with small concentrations, highly selective separation methods, such as hydrometallurgical routes, are needed. In addition, hydrometallurgical processes are also seen as more environmental friendly, and they have lower energy consumption, when compared to pyrometallurgical processes. In this thesis, solvent extraction and ion exchange are the most important hydrometallurgical separation methods studied. Solvent extraction is a mainstream unit operation in the metallurgical industry for all kinds of metals, but for ion exchange, practical applications are not as widespread. However, ion exchange is known to be particularly suitable for dilute feed solutions and complex separation tasks, which makes it a viable option, especially for processing secondary raw materials. Recovering valuable metals was studied with five different raw materials, which included liquid and solid side streams from metallurgical industries and WEEE. Recovery of high purity (99.7%) In, from LCD screens, was achieved by leaching with H2SO4, extracting In and Sn to D2EHPA, and selectively stripping In to HCl. In was also concentrated in the solvent extraction stage from 44 mg/L to 6.5 g/L. Ge was recovered as a side product from two different base metal process liquors with Nmethylglucamine functional chelating ion exchange resin (IRA-743). Based on equilibrium and dynamic modeling, a mechanism for this moderately complex adsorption process was suggested. Eu and Y were leached with high yields (91 and 83%) by 2 M H2SO4 from a fluorescent lamp precipitate of waste treatment plant. The waste also contained significant amounts of other REEs such as Gd and Tb, but these were not leached with common mineral acids in ambient conditions. Zn was selectively leached over Fe from steelmaking dusts with a controlled acidic leaching method, in which the pH did not go below, but was held close as possible to, 3. Mo was also present in the other studied dust, and was leached with pure water more effectively than with the acidic methods. Good yield and selectivity in the solvent extraction of Zn was achieved by D2EHPA. However, Fe needs to be eliminated in advance, either by the controlled leaching method or, for example, by precipitation. 100% Pure Mo/Cr product was achieved with quaternary ammonium salt (Aliquat 336) directly from the water leachate, without pH adjustment (pH 13.7). A Mo/Cr mixture was also obtained from H2SO4 leachates with hydroxyoxime LIX 84-I and trioctylamine (TOA), but the purities were 70% at most. However with Aliquat 336, again an over 99% pure mixture was obtained. High selectivity for Mo over Cr was not achieved with any of the studied reagents. Ag-NaCl solution was purified from divalent impurity metals by aminomethylphosphonium functional Lewatit TP-260 ion exchange resin. A novel preconditioning method, named controlled partial neutralization, with conjugate bases of weak organic acids, was used to control the pH in the column to avoid capacity losses or precipitations. Counter-current SMB was shown to be a better process configuration than either batch column operation or the cross-current operation conventionally used in the metallurgical industry. The raw materials used in this thesis were also evaluated from an economic point of view, and the precipitate from a waste fluorescent lamp treatment process was clearly shown to be the most promising.

Importance of considering food waste in the development of sustainable food packaging systems

Meeting the needs of both present and future generations forms the foundation of sustainable development. Concern about food demand is increasing alongside the continuously growing population. In the pursuit of food security preventing food waste is one solution avoiding the negative environmental impacts that result from producing food unnecessarily. Packages offer one answer to preventing food waste, as they 1) preserve and protect food, 2) introduce the user to the correct way to handle and use the food and package and 3) allow the user to consume the food in its entirety. This thesis aims to enhance the sustainability of food packages by giving special emphasis to preventing food waste. The focus of this thesis is to assist the packaging designer in being able to take into account the requirements for the sustainability of food packages and to be able to integrate these requirements into the product development process. In addition, life cycle methods that can be used as a tool in the packaging design process or in assessing the sustainability of finished food-packaging combinations are evaluated. The methods of life cycle costing (LCC) and life cycle working environment (LCWE) are briefly discussed. The method of life cycle assessment (LCA) is examined more thoroughly through the lens of the literature review of food-package LCA case studies published in the 21st century in three relevant journals. Based on this review and on experiences learned from conducting LCAs, recommendations are given as to how the LCA practitioner should conduct a food packaging study to make most of the results. Two case studies are presented in this thesis. The first case study relates the results of a life cycle assessment conducted for three food items (cold cut (ham), sliced dark bread (rye) and Soygurt drink) and the alternative packaging options of each. Results of this study show that the packaging constitutes only 1–12 % of the total environmental impacts of the food-packaging combination. The greatest effect is derived from the food itself and the wasted food. Even just a small percentage of wasted food causes more environmental impacts than does the packaging. The second case study presents the results of LCC and LCWE analysis done for fruit and vegetable transport packages. In this thesis, the specific results of the study itself are not the focus, but rather the study methods and scope are analysed based on how these complement the sustainability assessment of food packages. This thesis presents reasons why prevention of food waste should be more thoroughly taken into account in food packaging design. In addition, the task of the packaging designer is facilitated by the requirements of sustainable food packaging, by the methods and step-by-step guidance on how to integrate sustainability issues into the design process, and by the recommendations on how to assess the sustainability of food packages. The intention of this thesis is to express the issues that are important in the field of the food packaging industry. Having recognised and implemented these issues, businesses can better manage the risks that could follow from neglecting these sustainability aspects.

Capillary electrophoresis for monitoring of carboxylic, phenolic and amino acids in bioprocesses

Bioprocess technology is a multidisciplinary industry that combines knowledge of biology and chemistry with process engineering. It is a growing industry because its applications have an important role in the food, pharmaceutical, diagnostics and chemical industries. In addition, the current pressure to decrease our dependence on fossil fuels motivates new, innovative research in the replacement of petrochemical products. Bioprocesses are processes that utilize cells and/or their components in the production of desired products. Bioprocesses are already used to produce fuels and chemicals, especially ethanol and building-block chemicals such as carboxylic acids. In order to enable more efficient, sustainable and economically feasible bioprocesses, the raw materials must be cheap and the bioprocesses must be operated at optimal conditions. It is essential to measure different parameters that provide information about the process conditions and the main critical process parameters including cell density, substrate concentrations and products. In addition to offline analysis methods, online monitoring tools are becoming increasingly important in the optimization of bioprocesses. Capillary electrophoresis (CE) is a versatile analysis technique with no limitations concerning polar solvents, analytes or samples. Its resolution and efficiency are high in optimized methods creating a great potential for rapid detection and quantification. This work demonstrates the potential and possibilities of CE as a versatile bioprocess monitoring tool. As a part of this study a commercial CE device was modified for use as an online analysis tool for automated monitoring. The work describes three offline CE analysis methods for the determination of carboxylic, phenolic and amino acids that are present in bioprocesses, and an online CE analysis method for the monitoring of carboxylic acid production during bioprocesses. The detection methods were indirect and direct UV, and laser-induced frescence. The results of this work can be used for the optimization of bioprocess conditions, for the development of more robust and tolerant microorganisms, and to study the dynamics of bioprocesses.

FOOD PREFERENCE AND CONSUMPTION OF AQUATIC MACROPHYTES SUBMERGED BY SNAIL Pomacea canaliculata

ABSTRACTThe objective of this study was to evaluate the consumption potential, food preference and use of snail Pomacea canaliculata as a biocontrol agent of four submerged aquatic macrophytes (Ceratophyllumdemersum, Egeriadensa, Egerianajas and Hydrilla verticillata). Two experiments were performed. In the first experiment, the introduction of a snail took place and 10 grams of each macrophyte in plastic containers with 1 liter of water. The assessments of consumption by the snail were performed at each 48 hours, during 12 days. The second experiment was performed in 600 liters microcosms containing five snails in each experimental unit. Fifty grams of each macrophyte were offered the snails at the same time, adding the same amounts after seven, 14, 21 and 30 days. On both trials, the most consumed macrophyte by the P.canaliculata was H.verticillata (7.64 ± 1.0 g 48 h and 50 ± 0.18 g) respectively, significantly differing from the others. However, in the absence of H.verticilata, E.najas and E.densa were consumed. The preference of P.canaliculata for H.verticillata is very interesting, because this plant is exotic and problematic in Brazil, and the snail is one more tool for biological management of submerged aquatic macrophyte H.verticillata.

Weed Community in a Raw Sugarcane Renovation Area Submitted to Different Soil Managements

The objective of this study was to evaluate the weed community in a raw sugarcane renovation area with three soil managements and peanut sowing in succession. The experiment was conducted during the 2007/08 season on a raw sugarcane area harvested without prior burning in the last five cuts. A randomized block design with treatments arranged in a split plot and arranged in four replications was used. The main treatments consisted of three cropping systems: conventional tillage, minimum tillage and direct planting, and subplots consisted in the absence (resting) or presence of crop rotation with peanuts. After 135 days from planting peanuts and 180 days of sugarcane harvest, the number of weeds m-2 was counted and the shoot dry biomass of the weeds collected was determined. The data were interpreted by analysis of variance and the means were compared by Tukey's test at 5% probability so that phytosociological indices a, b, c e d were calculated. The use of soil conservation tillage and peanut in rotation with sugarcane in the renovation areas is effective in controlling weeds and suppression of weed species difficult to control like Cyperus rotundus, Commelina bengalensis, Urochloa plantaginea, and Digitaria nuda.

Stock Market reaction to the CSR announcements of American fast food companies

The purpose of this study is to examine whether Corporate Social Responsibility (CSR) announcements of the three biggest American fast food companies (McDonald’s, YUM! Brands and Wendy’s) have any effect on their stock returns as well as on the returns of the industry index (Dow Jones Restaurants and Bars). The time period under consideration starts on 1st of May 2001 and ends on 17th of October 2013. The stock market reaction is tested with an event study utilizing CAPM. The research employs the daily stock returns of the companies, the index and the benchmarks (NASDAQ and NYSE). The test of combined announcements did not reveal any significant effect on the index and McDonald’s. However the stock returns of Wendy’s and YUM! Brands reacted negatively. Moreover, the company level analyses showed that to their own CSR releases McDonald’s stock returns respond positively, YUM! Brands reacts negatively and Wendy’s does not have any reaction. Plus, it was found that the competitors of the announcing company tend to react negatively to all the events. Furthermore, the division of the events into sustainability categories showed statistically significant negative reaction from the Index, McDonald’s and YUM! Brands towards social announcements. At the same time only the index was positively affected by to the economic and environmental CSR news releases.

Food intake and weight of lactating rats maintained on different protein-calorie diets, and pup growth

Studies on rats maintained on low-protein-calorie diets during the lactation period show that food intake decreases. This process results in weight loss and a delay in litter development. The purpose of the present study was to determine the alterations in food intake, maternal weight and litter growth during lactation when dams were exposed to diets with different levels of protein and carbohydrate. Female Wistar rats receiving one of 4 different diets, A (N = 14), B (N = 14), C (N = 9) and D (N = 9), were used. Diet A contained 16% protein and 66% carbohydrate; diet B, 6% protein and 77% carbohydrate; diet C, 6% protein and 66% carbohydrate; diet D, 16% protein and 56% carbohydrate. Thus, C and D diets were hypocaloric, while A and B were isocaloric. The intake of a low-protein diet in groups B and C affected the weight of dams and litters during the last two weeks of lactation, while the low-calorie diets limited the growth of D litters at 21 days compared with A litters, but had no effect on the weight of D dams. Group B showed an increase in intake during the first five days of lactation, resulting in a behavioral calorie compensation due to the increase in carbohydrate content, but the intake decreased during the last part of lactation. Food intake regulation predominantly involves the recruitment of a variety of peripheral satiety systems that attempt to decrease the central feeding command system.