Cultural circuits of climate change in U.K. broadsheet newspapers, 1985–2003

This article argues for a cultural perspective to be brought to bear on studies of climate change risk perception. Developing the “circuit of culture” model, the article maintains that the producers and consumers of media texts are jointly engaged in dynamic, meaning-making activities that are context-specific and that change over time. A critical discourse analysis of climate change based on a database of newspaper reports from three U.K. broadsheet papers over the period 1985–2003 is presented. This empirical study identifies three distinct circuits of climate change—1985–1990, 1991–1996, 1997–2003—which are characterized by different framings of risks associated with climate change. The article concludes that there is evidence of social learning as actors build on their experiences in relation to climate change science and policy making. Two important factors in shaping the U.K.’s broadsheet newspapers’ discourse on “dangerous” climate change emerge as the agency of top political figures and the dominant ideological standpoints in different newspapers.

Experimental validation of a proposed single-phase five-level active rectifier operating with model predictive current control

This paper presents a model predictive current control applied to a proposed single-phase five-level active rectifier (FLAR). This current control strategy uses the discrete-time nature of the active rectifier to define its state in each sampling interval. Although the switching frequency is not constant, this current control strategy allows to follow the reference with low total harmonic distortion (THDF). The implementation of the active rectifier that was used to obtain the experimental results is described in detail along the paper, presenting the circuit topology, the principle of operation, the power theory, and the current control strategy. The experimental results confirm the robustness and good performance (with low current THDF and controlled output voltage) of the proposed single-phase FLAR operating with model predictive current control.

Optimización de Arquitecturas de Procesamiento Digital de Señales en Lógica Programable para Aplicaciones en Vuelos No Tripulados

En dispositivos electrónicos de última generación destinados a funciones de comunicación o control automático, los algoritmos de procesamiento digital de señales trasladados al hardware han ocupado un lugar fundamental. Es decir el estado de arte en el área de las comunicaciones y control puede resumirse en algoritmos basados en procesamiento digital de señales. Las implementaciones digitales de estos algoritmos han sido estudiadas en áreas de la informática desde hace tiempo. Sin embargo, aunque el incremento en la complejidad de los algoritmos modernos permite alcanzar desempeños atractivos en aplicaciones específicas, a su vez impone restricciones en la velocidad de operación que han motivado el diseño directamente en hardware de arquitecturas para alto rendimiento. En este contexto, los circuitos electrónicos basados en lógica programable, principalmente los basados en FPGA (Field-Programmable Gate Array), permiten obtener medidas de desempeño altamente confiables que proporcionan el acercamiento necesario hacia el diseño electrónico de circuitos para aplicaciones específicas “ASIC-VLSI” (Application Specific Integrated Circuit - Very Large Scale Integration). En este proyecto se analiza el diseño y la implementación de aquitecturas electrónicas para el procesamiento digital de señales, con el objeto de obtener medidas reales sobre el comportamiento del canal inalámbrico y su influencia sobre la estimación y el control de trayectoria en vehículos aéreos no tripulados (UAV, Unmanned Aerial Vehicle). Para esto se propone analizar un dispositivo híbrido basado en microcontroladores y circuitos FPGA y sobre este mismo dispositivo implementar mediante algoritmo un control de trayectoria que permita mantener un punto fijo en el centro del cuadro de una cámara de video a bordo de un UAV, que sea eficiente en términos de velocidad de operación, dimensiones y consumo de energía.

Dispersión agrícola y cambio social en las Sierras de Córdoba (ca. 1000 a C.- 1600 d C.) Agricultural spread and social change in Córdoba Hills (ca. 1000 b C- 1600 a D.)

El proceso cultural en las Sierras de Córdoba fue habitualmente concebido como marginal con respecto al Noroeste Argentino. Tras el establecimiento del esquema básico de la secuencia prehispánica, a mediados del siglo pasado, se definió una etapa agroalfarera de cronología tardía, que continuaba a una extensa etapa precerámica cuyos límites se aproximaban a la transición Pleistoceno-Holoceno. Se hacía referencia, de este modo, al advenimiento de un modo de vida agrícola y aldeano, que reemplazaba a otro basado en la caza y recolección. Dicha transformación, alternativamente atribuida a la población cazadora local o a una migración de grupos agricultores desde regiones vecinas, se habría consumado hacia 1500 AP, fijando uno de los límites de la dispersión de la agricultura andina. Es necesario destacar la extremada escasez y el carácter indirecto de las evidencias arqueológicas utilizadas para sustentar la ocurrencia de tal proceso. Asimismo, la vigencia de supuestos que han comenzado a mostrar inconsistencias con los resultados de las recientes investigaciones. Entre ellos, principalmente, el que asume que la introducción de la agricultura dio paso a una transformación radical de las sociedades prehispánicas, constituyendo un hito fundamental en su devenir histórico, el comienzo de una nueva etapa. Nuestros últimos estudios en el sector central de las Sierras de Córdoba apuntaron, entre otros objetivos, a reconocer indicadores arqueológicos directos de producción agrícola, así como de la manipulación y consumo de plantas cultivadas. Los primeros resultados nos permiten vislumbrar un escenario complejo que desafía los modelos vigentes. El consumo de maíz, por ejemplo, parece haber antecedido por muchos siglos a la adopción de prácticas agrícolas. El acceso a este cultígeno, sumado a otros elementos, indicaría cambios entre los cazadores-recolectores serranos, promovidos por su integración en redes macrorregionales que los vincularon con sociedades agricultoras de la vertiente oriental andina y quizás del Chaco Santiagueño, por lo menos desde 2500 AP. En definitiva, la agricultura no parece haber sido adoptada rápidamente ni provocado transformaciones profundas e inmediatas en la organización de los grupos prehispánicos. Se ha observado, por el contrario, la incorporación gradual de distintas innovaciones que incluso permiten relacionar la manipulación y más tarde el cultivo de plantas domesticadas, con procesos de intensificación productiva de mayor escala temporal. Uno de nuestros objetivos en este proyecto consiste, básicamente, en profundizar las investigaciones en curso a fin de ampliar el cuerpo de datos con el cual analizar y discutir el problema de la dispersión agrícola en la región. Ello implica el tratamiento de diferentes líneas de evidencia, en particular: 1) la distribución regional de sitios arqueológicos y las modalidades de ocupación de las tierras cultivables; 2) la búsqueda de superficies de cultivo en sitios estratificados; y 3) estudios arqueobotánicos, polínicos y de isótopos estables. Se entiende que no le corresponde a la arqueología asumir apriorísticamente el significado histórico de la introducción de la agricultura, sino establecerlo en cada caso puntual a través de la investigación concreta. Nuestro segundo objetivo consiste, por lo tanto, en delinear los cambios (económicos, tecnológicos, políticos, sociales) que acompañaron al proceso de dispersión agrícola. Ello implica el tratamiento de diferentes problemas, entre otros: 1) las prácticas de apropiación de los recursos silvestres; 2) la continuidad y cambio tecnológico; 3) la movilidad y la articulación microambiental; y 4) los aspectos políticos y sociales ligados a prácticas como la molienda grupal y la producción del arte rupestre. The radical chage of societies from hunter-gatherers to farmers in 1500 BP was considered a milestone whitin the cultural process of pre-hispanic societies in Cordoba Hill. But there is a shortage of archaeological remains to support this change and there are weak hypotheses of absolute transformations. During the last years, our studies carried out on the central area of Cordoba Hill have tried to recognize direct archaeological signs of agriculture production as well as the handling and consumption of crops. The first results show a complex set that challenges the current theoretical models. For example, the corn was probably eatten prior to its adoption for farm practices. Our first main consists in increasing a corpus of data about the spread of agriculture in Cordoba region that we have been researching for the last years. These researches involve different lines of evidence: 1-regional location of archaeological sites and kinds of occupation on cultivable lands; 2-the search for plots at archaeological sites; 3-archaeobotanical, pollen and stable isotopes studies. Our second main consists in outlining changes within the spread of agriculture. It implies to considering different problems: 1-the practices to gatherer wild resources; 2-the continuity and changes of technologies; 3-the mobility and the articulation on the micro-environment; 4-political and social aspects in connection with activities such as groupal grinding and rock art productions.

Development of a semi-automatic self learning pattern recognition system for the control of electronic boards

This project was funded under the Applied Research Grants Scheme administered by Enterprise Ireland. The project was a partnership between Galway - Mayo Institute of Technology and an industrial company, Tyco/Mallinckrodt Galway. The project aimed to develop a semi - automatic, self - learning pattern recognition system capable of detecting defects on the printed circuits boards such as component vacancy, component misalignment, component orientation, component error, and component weld. The research was conducted in three directions: image acquisition, image filtering/recognition and software development. Image acquisition studied the process of forming and digitizing images and some fundamental aspects regarding the human visual perception. The importance of choosing the right camera and illumination system for a certain type of problem has been highlighted. Probably the most important step towards image recognition is image filtering, The filters are used to correct and enhance images in order to prepare them for recognition. Convolution, histogram equalisation, filters based on Boolean mathematics, noise reduction, edge detection, geometrical filters, cross-correlation filters and image compression are some examples of the filters that have been studied and successfully implemented in the software application. The software application developed during the research is customized in order to meet the requirements of the industrial partner. The application is able to analyze pictures, perform the filtering, build libraries, process images and generate log files. It incorporates most of the filters studied and together with the illumination system and the camera it provides a fully integrated framework able to analyze defects on printed circuit boards.

Optimisation of a surface mount technology process using a SnAgCu lead-free alloy

The impending introduction of lead-free solder in the manufacture of electrical and electronic products has presented the electronics industry with many challenges. European manufacturers must transfer from a tin-lead process to a lead-free process by July 2006 as a result of the publication of two directives from the European Parliament. Tin-lead solders have been used for mechanical and electrical connections on printed circuit boards for over fifty years and considerable process knowledge has been accumulated. Extensive literature reviews were conducted on the topic and as a result it was found there are many implications to be considered with the introduction of lead-free solder. One particular question that requires answering is; can lead-free solder be used in existing manufacturing processes? The purpose of this research is to conduct a comparative study of a tin-lead solder and a lead-free solder in two key surface mount technology (SMT) processes. The two SMT processes in question were the stencil printing process and the reflow soldering process. Unreplicated fractional factorial experimental designs were used to carry out the studies. The quality of paste deposition in terms of height and volume were the characteristics of interest in the stencil printing process. The quality of solder joints produced in the reflow soldering experiment was assessed using x-ray and cross sectional analysis. This provided qualitative data that was then uniquely scored and weighted using a method developed during the research. Nested experimental design techniques were then used to analyse the resulting quantitative data. Predictive models were developed that allowed for the optimisation of both processes. Results from both experiments show that solder joints of comparable quality to those produced using tin-lead solder can be produced using lead-free solder in current SMT processes.

O depoimento da criança no processo civil e sua valoração probatória

O presente trabalho tem por objetivo examinar um dos meios de prova oral do processo civil, que é o depoimento da criança. Diante da existência de uma certa resistência quanto à utilização e validade deste meio de prova, foram destacados argumentos de direito probatório favoráveis à tomada do depoimento infantil, como o direito à prova no sistema da prova livre e na vertente do direito de ação e defesa, além da necessária comparação com o processo penal e o destaque aos princípios da proteção integral e do superior interesse da criança, os quais foram reforçados por outros de natureza médico-psicológica, que visaram a destacar a capacidade cognitiva da criança em recordar fatos e relatá-los. Após a desconstrução do modelo de exclusão prévia do depoimento infantil, a dissertação abordou os modelos de proteção para a audição judicial da criança, para se evitar a vitimização secundária da criança e exposição desnecessária às partes, advogados e juízes. Neste particular, foram revisados os modelos inglês do closed-circuit television - CCTV e argentino da Câmara de Gesell como paradigmas para vários outros países, inclusive o Brasil que tem incentivado o depoimento sem dano. Em derradeiro, foi examinada a valoração desse depoimento da criança, tomando-se por base a justificação lógico-racional da prova consubstanciada nos módulos de constatação, ocasião em que foi possível sublinhar que a utilização dos modelos e métodos de inquirição protetivos culminam em maior credibilidade ao depoimento da criança no processo civil e proporcionam a descoberta de falsidade voluntária ou não. Também no tópico da valoração da prova, o conteúdo do depoimento infantil vai trazer maior confiança quando conjugado com elementos intrínsecos, como a coerência do discurso e a ausência de contradições, e extrínsecos, realizado na modalidade protetiva.

Erstellung einer Blitzschutzrichtlinie für die Produktpalette der FAM im Auftrag der "Gesellschaft für Prozeßautomation mbH" (GPA)"

On the basis of the global use of the FAM installations and systems, their location, type and height, a lightning protection system is required, which protects humans and machines from danger of a lightning. At the beginning the development, the threat and the potential for destruction of lightning are described. Besides the resulting solid normative calculation models and tables are presented. Then, the product portfolio of the FAM is characterized. From this demonstration models are selected; on the one hand a model for the totality of all portable devices and the other hand a model which defines the power plants. Subsequently, the risk management and a strengths and weaknesses analysis are performed. After that, with graphical and mathematical models, these weaknesses as well as the functional equipotential bonding and grounding system and its dimensioning are investigated and solutions are demonstrated. The following is a coordination of lightning protection standard with other directives and standards in order to classify the resulting internal lightning protection and protective measures against electromagnetic pulse and to generate a uniform protection and application platform. Furthermore, problems of the economy of protective circuit is shown and a solution is given. Finally, the indicated possible solutions are replaced by definitions. The main classification and structure of lightning protection directive are shown and exemplarily applied.

Double-Exponential Model of a Photovoltaic Cell with Temperature Dependence

The purpose of the research is the creation of mathematical models in MATLAB based on the double exponential model of the photovoltaic cell. The developed model allows for different physical and environmental parameters. An equivalent circuit of the model includes a photocurrent source, two diodes, and a series and parallel resistance. The paper presents the simulation results for each parameter. The simulation data are displayed graphically and numerical results are saved in a file.

Um chronographo de construção simples, permittindo registrar intervallos de tempo de 1 a 60 segundos

Descriptive memorial of a chronograph made from a common chronoscop (Eastman Timer). The chronoscop has been modified in order to permit to adjust distinct cog-wheels, everyone in its turn, to the axis of the seconds hand. Each of these cog-wheels holds a definite number of teeth accordingly with the time interval ones desire to record. A wheel with 20 teeth, for instance, is available for recording time in periods of each three seconds, another wheel with 6 teeth, will reckon time in intervals of 10 seconds and so on. These wheels may be interchanged most easily, which enables, with the same apparatus, to have at hand a time recorder for any time interval between one and sixty seconds. To register the time the apparatus is connected with a dry cell. A wire is attached to a binding post on the metal case of the apparatus, another wire being connected with an isolated binding post placed in front of the cog-wheel and fastened to a platinum point allowing open or shut the circuit, every time one of the cogs of the wheel comes into contact with this platinum point. A signal magnet is placed also in the circuit for writing the time intervals on the revolving drum.

Free and fragmenting filling length

The filling length of an edge-circuit η in the Cayley 2-complex of a finite presentation of a group is the minimal integer length L such that there is a combinatorial null-homotopy of η down to a base point through loops of length at most L. We introduce similar notions in which the full-homotopy is not required to fix a base point, and in which the contracting loop is allowed to bifurcate. We exhibit a group in which the resulting filling invariants exhibit dramatically different behaviour to the standard notion of filling length. We also define the corresponding filling invariants for Riemannian manifolds and translate our results to this setting.

Diseño y fabricación de una antena con diversidad en polarización para redes WIFI a 2,4 GHz

Existeixen diferents tecnologies de transmissió sense fils, però la més coneguda és la tecnologia WIFI (Wireless Fidelity) que opera a la banda dels 2,4 GHz a Europa. Aquest tipus de xarxes opera en entorns indoor, on el canal està sotmès a una aleatorietat i complexitat elevades degut a la presència d’una gran quantitat d’elements que poden fer que la senyal rebuda presenti variacions importants en les seves característiques (nivell de senyal, polarització...). Aquest fet motiva la necessitat de desenvolupar i implantar sistemes de comunicacions amb solucions per poder minimitzar els efectes provocats per l’entorn a la senyal. Per poder pal·liar aquestes variacions, en aquest projecte s’ha dissenyat i fabricat una antena formada per dos dipols disposats un ortogonal a l’altre de manera que existeixi diversitat en polarització. La freqüència de treball de la antena és de 2,4 GHz. Rebuda una senyal de RF, el circuit de commutació permetrà seleccionar el dipol pel qual es rep la senyal de RF amb una major potència.

Extracción de parámetros de un resonador FBAR por optimización

L’objectiu d’aquest projecte que consisteix a elaborar un algoritme d’optimització que permeti, mitjançant un ajust de dades per mínims quadrats, la extracció dels paràmetres del circuit equivalent que composen el model teòric d’un ressonador FBAR, a partir de les mesures dels paràmetres S. Per a dur a terme aquest treball, es desenvolupa en primer lloc tota la teoria necessària de ressonadors FBAR. Començant pel funcionament i l’estructura, i mostrant especial interès en el modelat d’aquests ressonadors mitjançant els models de Mason, Butterworth Van-Dyke i BVD Modificat. En segon terme, s’estudia la teoria sobre optimització i programació No-Lineal. Un cop s’ha exposat la teoria, es procedeix a la descripció de l’algoritme implementat. Aquest algoritme utilitza una estratègia de múltiples passos que agilitzen l'extracció dels paràmetres del ressonador.

Diseño de filtros con topología apilada mediante resonadores FBAR

Els continguts de la memòria es divideixen en dues parts fonamentals, precedides d’una breu explicació on s’introdueix al lector en el tema; primer s’exposen les bases d’un ressonador simple FBAR, d’on s’obtenen equacions de control vitals, i seguidament es plantegen les bases per a un ressonador apilat SCR, derivades de l’estudi previ d’un ressonador simple. La primera part fonamental del treball es centra en l’anàlisi d’un ressonador SCR. Aquest anàlisi es recolza sobre el punt de vista teòric dels paràmetres imatge, el nostre punt de sortida. Aquesta primera part és la més teòrica: obtenció i aplicació dels paràmetres imatge i obtenció dels elements discrets que conformen el circuit equivalent SCR, una xarxa de dos ports. Posteriorment, s’analitza què succeeix modificant els valors dels elements discrets sense variar determinats paràmetres imatge i finalment, es proposa una aproximació per a controlar determinades especificacions de disseny, com són l’ample de banda de transmissió de la xarxa i el factor de qualitat, en funció de les modificacions dels elements discrets. En la segona part s’analitzen, de forma qualitativa, xarxes compostes per diferents ressonadors apilats connectats en cascada. Aquest segon estudi es divideix en dues subparts. En la primera connectem N ressonadors idèntics, plantegem algunes equacions de control i analitzem les respostes. En la segona, es planteja la connexió de dos (N=2) ressonadors diferents amb freqüències de ressonància properes. Aquest segon anàlisi es també totalment qualitatiu, però ens aporta informació que amb la unió de N ressonadors iguals no aconseguíem. Finalitzant aquesta segona part, es planteja l’optimització dels resultats obtinguts per a N=2, mitjançant estructures N=3 ressonadors.

Model analític de les característiques DC de transistors de doble porta

En aquest treball s’implementa un model analític de les característiques DC del MOSFET de doble porta (DG-MOSFET), basat en la solució de l’equació de Poisson i en la teoria de deriva-difussió[1]. El MOSFET de doble porta asimètric presenta una gran flexibilitat en el disseny de la tensió llindar i del corrent OFF. El model analític reprodueix les característiques DC del DG-MOSFET de canal llarg i és la base per construir models circuitals tipus SPICE.