Analysis of electricity distribution network operation business models and capitalization of control room functions with DMS

Electricity distribution network operation (NO) models are challenged as they are expected to continue to undergo changes during the coming decades in the fairly developed and regulated Nordic electricity market. Network asset managers are to adapt to competitive technoeconomical business models regarding the operation of increasingly intelligent distribution networks. Factors driving the changes for new business models within network operation include: increased investments in distributed automation (DA), regulative frameworks for annual profit limits and quality through outage cost, increasing end-customer demands, climatic changes and increasing use of data system tools, such as Distribution Management System (DMS). The doctoral thesis addresses the questions a) whether there exist conditions and qualifications for competitive markets within electricity distribution network operation and b) if so, identification of limitations and required business mechanisms. This doctoral thesis aims to provide an analytical business framework, primarily for electric utilities, for evaluation and development purposes of dedicated network operation models to meet future market dynamics within network operation. In the thesis, the generic build-up of a business model has been addressed through the use of the strategicbusiness hierarchy levels of mission, vision and strategy for definition of the strategic direction of the business followed by the planning, management and process execution levels of enterprisestrategy execution. Research questions within electricity distribution network operation are addressed at the specified hierarchy levels. The results of the research represent interdisciplinary findings in the areas of electrical engineering and production economics. The main scientific contributions include further development of the extended transaction cost economics (TCE) for government decisions within electricity networks and validation of the usability of the methodology for the electricity distribution industry. Moreover, DMS benefit evaluations in the thesis based on the outage cost calculations propose theoretical maximum benefits of DMS applications equalling roughly 25% of the annual outage costs and 10% of the respective operative costs in the case electric utility. Hence, the annual measurable theoretical benefits from the use of DMS applications are considerable. The theoretical results in the thesis are generally validated by surveys and questionnaires.

IDEAS for Strategic Technology Management: Design of an electronically mediated scenario method

The age-old adage goes that nothing in this world lasts but change, and this generation has indeed seen changes that are unprecedented. Business managers do not have the luxury of going with the flow: they have to plan ahead, to think strategies that will meet the changing conditions, however stormy the weather seems to be. This demand raises the question of whether there is something a manager or planner can do to circumvent the eye of the storm in the future? Intuitively, one can either run on the risk of something happening without preparing, or one can try to prepare oneself. Preparing by planning for each eventuality and contingency would be impractical and prohibitively expensive, so one needs to develop foreknowledge, or foresight past the horizon of the present and the immediate future. The research mission in this study is to support strategic technology management by designing an effective and efficient scenario method to induce foresight to practicing managers. The design science framework guides this study in developing and evaluating the IDEAS method. The IDEAS method is an electronically mediated scenario method that is specifically designed to be an effective and accessible. The design is based on the state-of-the-art in scenario planning, and the product is a technology-based artifact to solve the foresight problem. This study demonstrates the utility, quality and efficacy of the artifact through a multi-method empirical evaluation study, first by experimental testing and secondly through two case studies. The construction of the artifact is rigorously documented as justification knowledge as well as the principles of form and function on the general level, and later through the description and evaluation of instantiations. This design contributes both to practice and foundation of the design. The IDEAS method contributes to the state-of-the-art in scenario planning by offering a light-weight and intuitive scenario method for resource constrained applications. Additionally, the study contributes to the foundations and methods of design by forging a clear design science framework which is followed rigorously. To summarize, the IDEAS method is offered for strategic technology management, with a confident belief that it will enable gaining foresight and aid the users to choose trajectories past the gales of creative destruction and off to a brighter future.

Modulaarinen kiinnitintekniikka alumiiniveneiden robottihitsauksessa

Tällä hetkellä hitsauksen automatisointiaste on hyvin pieni alumiinivenevalmistuksessa. Automatisointiasteen kasvattaminen on ensiarvoisen tärkeää kilpailukyvyn säilyttämiseksi, sekä edelleen nostamiseksi. Automatisointiasteen kasvattamisen esteenä ei ole teknologian puute, vaan suunnitellut tuotteet soveltuvat huonosti robotisoituun hitsaukseen. Lisäksi liitettävien osien tarkkuus on monissa tapauksissa puutteellinen, joten robottihitsaus on monessa tapauksessa mahdotonta. Robottihitsauksessa vaaditaan osien hyvää paikoittamista ja siihen tarvitaan kiinnittimiä. Kuitenkin alumiinivenevalmistuksessa valmistusmäärät ovat sen verran pieniä, että tuotekohtaisia kiinnittimiä ei kannata hankkia tai valmistaa. Siksi kiinnittimiltä vaaditaan joustavuutta ja modulaarisuutta, jotta samalla kiinnittimellä voi hitsata useita vastaavia piirteitä omaavia tuotteita. Tässä työssä tutkittiin modulaarisia kiinnittimiä, edistyneitä kiinnitinsuunnitteluprosesseja, osavalmistustarkkuuksia, tuotemoduloinnin hyödyntämistä ja alumiinin robottihitsauksen erityispiirteitä. Työssä suunniteltiin ja simuloitiin modulaarinen hitsauskiinnitin, jota käytetään tietyn alumiinivenemallin erillisenä osakokoonpanona valmistettavan jäykisterakennekonseptin hitsaamiseen. Suunnittelu ja simulointi tehtiin Delmia V5R20 -ohjelmistolla. Jäykisterakenne on modulaarinen tuoterakenne, jossa käytetään itsepaikoittavia liitoksia helpottamaan osien asettelua ja yksinkertaistamaan kiinnitintä. Kiinnitin soveltuu joustavasti erikokoisten jäykisterakenneosakokoonpanojen valmistukseen. Lisäksi suunniteltua kiinnitintä verrattiin kaupalliseen modulaariseen Demmeler -kiinnitinjärjestelmään. Jäykisterakenteen osakokoonpanon hitsaaminen robotilla lyhentää valmistusaikaa verrattuna nykytilaan, kun osat voidaan asettaa kiinnittimeen nopeasti ja luotettavasti. Samalla jäykisterakenteen tekeminen erillisenä osakokoonpanona lyhentää veneen rungon loppukokoonpanoaikaa ja mahdollistaa hitsausrobotin käytön myös veneen muiden hitsien hitsaamisessa. Modulaarisilla hitsauskiinnittimillä saavutetaan alumiiniveneiden nykyisillä valmistusmäärillä skaalaetuja, joita tuotekohtaisella kiinnittimellä ei voi saavuttaa.

On the development of object functions and restrictions for shapes made with a turret punch press

This study presents the information required to describe the machine and device resources in the turret punch press environment which are needed for the development of the analysing method for automated production. The description of product and device resources and their interconnectedness is the starting point for method comparison the development of expenses, production planning and the performance of optimisation. The manufacturing method cannot be optimized unless the variables and their interdependence are known. Sheet metal parts in particular may then become remarkably complex, and their automatic manufacture may be difficult or, with some automatic equipment, even impossible if not know manufacturing properties. This thesis consists of three main elements, which constitute the triangulation. In the first phase of triangulation, the manufacture occuring on a turret punch press is examined in order to find the factors that affect the efficiency of production. In the second phase of triangulation, the manufacturability of products on turret punch presses is examined through a set of laboratory tests. The third phase oftriangulation involves an examination of five industry parts. The main key findings of this study are: all possible efficiency in high automation level machining cannot be achieved unless the raw materials used in production and the dependencies of the machine and tools are well known. Machine-specific manufacturability factors for turret punch presses were not taken into account in the industrial case samples. On the grounds of the performed tests and industrial case samples, the designer of a sheet metal product can directly influence the machining time, material loss, energy consumption and the number of tools required on a turret punch press by making decisions in the way presented in the hypothesis of thisstudy. The sheet metal parts to be produced can be optimised to bemanufactured on a turret punch press when the material to be used and the kinds of machine and tool options available are known. This provides in-depth knowledge of the machine and tool properties machine and tool-specifically. None of the optimisation starting points described here is a separate entity; instead, they are all connected to each other.

A practice perspective on organizational implementation of information technology

Implementering av ett informationssystem ur en organisatorisk synvinkel initieras av en idé om ett system och avslutas då användningen av det inte längre kräver en medveten ansträngning. Ifall tolkningen av implementering är denna, är det fråga om en långsam och komplicerad process, som berör organisationens alla parter. Ny informationsteknologi anses påverka flertalet arbetsprocesser och organiseringen av det dagliga arbetet. Möjligheterna att ta i bruk systemet och utnyttja det är många. I avhandlingen undersöks implementering av ett system för att administrera hemvårdsbesök där hemvårdare använde handdatorer för att registrera information om besökens längd och innehåll. I avhandlingen observeras vilka förändringar som sker i arbetets praxis p.g.a. det nya systemet och hur dessa förändringar påverkar vårdarbetet. Forskningen inleds med att strukturera teorier om arbetspraxis för kommande analys. Arbetspraxis är inarbetade och rutinmässiga arbetssätt i arbetets sociomateriella omgivning. Arbetspraxis i avhandlingen innebär hemvårdarens praxis och upplevd erfarenhet, där verksamheten informeras av gemensamma arbetssätt, projekt, identiteter och intressen. Organisationens auktoritet kommer även fram i den förverkligade arbetspraxisen. Forskningen genomfördes som en etnografisk longitudinell studie under åren 2001-2004. I studien observerades hur nyttjandet av handdatorerna framskred ur ett organisatoriskt perspektiv. Hemvårdares arbete och verksamhet (arbetspraxis) observerades både under vårdsbesök och under pauser. Därtill intervjuades hemvårdarna för att erhålla en bättre förståelse för de rationaliteter som styr arbetet och hur systemet togs i bruk. Dokument relaterade till projektet att införa ett nytt system och administrativa dokument har utnyttjats som källmaterial. Analysen av källmaterialet styrdes av det teoretiska tillvägagångssättet att undersöka arbetspraxis. Problem som identifierades i samband med införandet av systemet och de förändringar som det medförde analyserades i detalj. Parallellt analyserades organisatorisk makt, kontroll och arbetsidentitet. Undersökningen beskriver hur det nya systemet gradvis anpassades till hemvården efter ett initialt motstånd. Under själva implementering av systemet ifrågasattes tidigare arbetspraxis och inställningen till den eftersom arbetspraxisens materiella omgivning förändrades. Det teoretiska tillvägagångssättet i att undersöka arbetspraxis framhäver vårdarens agerande i förändringsprocessen. Resultatet av forskningen visar vikten av realistiska målsättningar, givande av gruppstöd med återkoppling samt förmåga att anpassa sig till det oväntade vid införande av informationssystem.

Customer Driven Service Development – Technology-based Care and Services for the Elderly

The objective of this master’s thesis was to examine technology-based smart home devices and services. Topic was approached through basic theories, transaction cost theory and resource-based view in order to build basis for this thesis. Conceptual framework was discussed by means of networks, value networks and service systems which provide a useful framework for service development. The needs of the elderly living at home were discussed in order to find out which technology-based services could be used to satisfy the needs. Segmentation and need data collected previously during proactive home visits was exploited and additionally a survey targeted to experts and professionals of social and health care sector was done to verify the needs. Finally, the results of the survey were analyzed using quality function deployment method to figure out the most important and suitable service offerings for the elderly. As a conclusion of analysis, social media and monitoring services are the most useful technology-based services. However, traditional home services will still maintain their necessity too.

Alumiiniveneen rungon modulointi robottihitsauksen tehostamiseksi

Alumiiniveneiden valmistuksessa hitsauksen automatisointiaste on hyvin matala. Kilpailukyvyn säilyttämiseksi on tärkeää saada automatisointiastetta nostettua ja tätä kautta hitsauskustannuksia alennettua. Automatisoinnin esteenä ei ole teknologian puute, vaan ongelmana on alumiiniveneiden rakenteen huono soveltuvuus automatisoituun tuotantoon. Rakenteen kehittäminen modulaariseksi on yksi mahdollisuus tehostaa robottihitsausta venerunkojen valmistuksessa. Tässä diplomityössä tutkittiin modulaarisuutta, modulointiin johtavia tekijöitä sekä modulaarisuudella mahdollisesti saavutettavia etuja valmistavassa teollisuudessa ja erityisesti robottihitsauksessa. Lisäksi käsiteltiin modulointiin läheisesti liittyvää valmistus- ja kokoonpanoystävällistä suunnittelua. Työssä tehtiin modulointiesimerkki huviveneen rungon robottihitsauksen tehostamiseksi. Veneen runko ja siihen suunniteltu jäykisterakennemoduuli mallinnettiin käyttäen SolidWorks-ohjelmistoa sekä Delmia V5-ohjelmistoon sisällytettyä Catia V5-suunnitteluympäristöä. Suunnitellun modulaarisen rakenteen hitsattavuutta ja hitsaukseen kuluvaa aikaa simuloitiin Delmia V5-ohjelmistolla. Modulaarisen rakenteen avulla robottihitsattavuutta on mahdollista tehostaa erityisesti rungon sisäisen jäykisterakenteen osalta. Kun tuotteesta on suurempi osa hitsattavissa robotin avulla, on myös robotisointi-investoinnit kannattavampia. Modulaarisuuden avulla voidaan päästä myös pienillä tuotantomäärillä sarjatuotannon etuihin, kun samaa moduulia voidaan käyttää vähäisillä muutoksilla useammassa eri venemallissa.

ZigBee-verkot ja evaluointilaitteen suunnittelu

In this thesis a closer look at ZigBee wireless network protocol was made and a ZigBee evaluation device was designed and built for testing it. ZigBee is a digital wireless network technology published in 2004, which was developed for wireless control and automation systems. It is based on the IEEE 802.15.4-2003 standard, and its aim was to create a reliable wireless networking protocol with secure data transmissions, low power consumption and low manufacturing costs. The low power consumption requirement has also led to a slow data rate and a short range, but in a ZigBee network individual network devices can route messages to each other, so short range is not a problem. In automation and control systems a fast data rate is not usually an important requirement either. ZigBee network can form automatically and one ZigBee network can theoretically include thousands of devices, all of which can communicate with each other. ZigBee network is also self-healing, so an individual device dropping out of the network, like breaking down, does not affect functionality of the network. Evaluation device was designed and implemented in four different versions, which were tested with six different antenna designs. All antennas were tested at a range of 100 meters in an open terrain using two different frequencies and transmission powers. Also a range test was performed for selected antennas using transmission power of 4,5 dBm, which was maximum power of the ZigBee chip used in the evaluation device. Range test resulted in a measured range of several hundred meters, which can be considered as a good result for a short-range technology.

Experiences of Organising the Master of Science Programme in Packaging Technology

Organising the PT- programme for full-time working adult students is a challenging task as it is an international programme with both domestic and foreign students with different educational background. The purpose of this project work is to provide both student and lecturer feedback for improving Master Of Science Degree Programme in Packaging Technology to meet better the requirements of part-time studying. The objective of this work is in accordance with the Lappeenranta University of Technology’s strategy to improve continuously degree programmes and courses and to use student feedback in this development work of education. Matters, such as lecture schemes, distance material distribution, distance assignment handling, course assessments, and guidance of thesis work will be under scrutiny.

Challenges of business process automation for small and medium enterprises

The aim of the study was to examine problems that small and medium enterprises are facing during the implementation of business process automation projects. Study reveals problems from the point of view of companies who are implementing automation projects and from the point of view of IT-integrators who are specifying in IT solutions for small and medium companies.

Towards adoption of eLearning technologies at Lappeenranta University of Technology: Understanding Teachers‟ Adoption of Blackboard Learning System

The electronic learning has become crucial in higher education with increased usage of learning management systems as a key source of integration on distance learning. The objective of this study is to understand how university teachers are influenced to use and adopt web-based learning management systems. Blackboard, as one of the systems used internationally by various universities is applied as a case. Semi-structured interviews were made with professors and lecturers who are using Blackboard at Lappeenranta University of Technology. The data collected were categorized under constructs adapted from Unified Theory of Acceptance and Use of Technology (UTAUT) and interpretation and discussion were based on reviewed literature. The findings suggest that adoption of learning management systems by LUT teachers is highly influenced by perceived usefulness, facilitating conditions and gained experience. The findings also suggest that easiness of using the system and social influence appear as medium influence of adoption for teachers at LUT.

Upconverting Phosphor Technology: Exceptional Photoluminescent Properties Light Up Homogeneous Bioanalytical Assays

The aim of the present study was to demonstrate the wide applicability of the novel photoluminescent labels called upconverting phosphors (UCPs) in proximity-based bioanalytical assays. The exceptional features of the lanthanide-doped inorganic UCP compounds stem from their capability for photon upconversion resulting in anti-Stokes photoluminescence at visible wavelengths under near-infrared (NIR) excitation. Major limitations related to conventional photoluminescent labels are avoided, rendering the UCPs a competitive next-generation label technology. First, the background luminescence is minimized due to total elimination of autofluorescence. Consequently, improvements in detectability are expected. Second, at the long wavelengths (>600 nm) used for exciting and detecting the UCPs, the transmittance of sample matrixes is significantly greater in comparison with shorter wavelengths. Colored samples are no longer an obstacle to the luminescence measurement, and more flexibility is allowed even in homogeneous assay concepts, where the sample matrix remains present during the entire analysis procedure, including label detection. To transform a UCP particle into a biocompatible label suitable for bioanalytical assays, it must be colloidal in an aqueous environment and covered with biomolecules capable of recognizing the analyte molecule. At the beginning of this study, only UCP bulk material was available, and it was necessary to process the material to submicrometer-sized particles prior to use. Later, the ground UCPs, with irregular shape, wide size-distribution and heterogeneous luminescence properties, were substituted by a smaller-sized spherical UCP material. The surface functionalization of the UCPs was realized by producing a thin hydrophilic coating. Polymer adsorption on the UCP surface is a simple way to introduce functional groups for bioconjugation purposes, but possible stability issues encouraged us to optimize an optional silica-encapsulation method which produces a coating that is not detached in storage or assay conditions. An extremely thin monolayer around the UCPs was pursued due to their intended use as short-distance energy donors, and much attention was paid to controlling the thickness of the coating. The performance of the UCP technology was evaluated in three different homogeneous resonance energy transfer-based bioanalytical assays: a competitive ligand binding assay, a hybridization assay for nucleic acid detection and an enzyme activity assay. To complete the list, a competitive immunoassay has been published previously. Our systematic investigation showed that a nonradiative energy transfer mechanism is indeed involved, when a UCP and an acceptor fluorophore are brought into close proximity in aqueous suspension. This process is the basis for the above-mentioned homogeneous assays, in which the distance between the fluorescent species depends on a specific biomolecular binding event. According to the studies, the submicrometer-sized UCP labels allow versatile proximity-based bioanalysis with low detection limits (a low-nanomolar concentration for biotin, 0.01 U for benzonase enzyme, 0.35 nM for target DNA sequence).

Rediscovering profitability in entrepreneurship : evidence from Finnish high-technology start-ups

Denna avhandling utmanar sambandet mellan tillväxt och lönsamhet. Lönsamhet, som borde vara företagens största prioritet har nästan totalt försvunnit från entreprenörskapsfältet. Istället har den blivit ersatt av en fokus på tillväxt och framförallt hög tillväxt. Den nuvarande allmänna normen verkar vara att tillväxt blint prioriteras över lönsamhet. Detta beror på det förvrängda sambandet mellan tillväxt och lönsamhet; antagandet att hög tillväxt förr eller senare kommer att leda till hög lönsamhet. Således ses tillväxt som ett mått på ett företags framgång och som ett mål värt att eftersträva. Det har blivit fokuset i allmän media och entreprenörskapsforskning, något beslutfattarna försöker stöda och uppmuntra, entreprenörerna vill uppnå och finansiärerna vill skapa. Allt detta, oftast på bekostnad av lönsamhet. Denna avhandling strävar efter att få en ändring på detta genom att utmana denna nuvarande norm. Avhandlingens empiriska del fokuserar sig på nya finska högteknologiföretag inom bio- och IT-branschen. Tillväxtfenomenet studeras i tre olika kontexter: forskningen (en analys på 118 artiklar i ledande entreprenörskaps och managementjournaler), praktiken (en finansiell analys på 1039 nya företag) och bland intressenternas perspektiv (23 intervjuer med entreprenörer, beslutsfattare, offentliga finansiärer och riskfinansiärer). Resultaten bekräftar en stark förvrängning av tillväxt och lönsamhet inom de tre studerade kontexterna. Den finansiella analysen bekräftar resultaten av senare forskning och visar att lönsamhet, istället för tillväxt, är förutsättningen för fortsatt lönsam tillväxt. Resultaten stämmer oberoende av företagens ålder. Det visas även att en ändring i strategisk position är osannolik och mycket svår att genomföra. Detta lyfter fram nödvändigheten för startade företag att fokusera sig på rätt saker genast från start; skapandet av en lönsam affärsmodell.

Automated Software Testing in Machine Automation

The problem of software (SW) defaults is becoming more and more topical because of increasing amount of the SW and its complication. The majority of these defaults are founded during the test part that consumes about 40-50% of the development efforts. Test automation allows reducing the cost of this process and increasing testing effectiveness. In the middle of 1980 the first tools for automated testing appeared and the automated process was implemented in different kinds of SW testing. In short time, it became obviously, automated testing can cause many problems such as increasing product cost, decreasing reliability and even project fail. This thesis describes automated testing process, its concept, lists main problems, and gives an algorithm for automated test tools selection. Also this work presents an overview of the main automated test tools for embedded systems.