Studies of catalyzed reaction mechanism between co-polyether (THF/EO) and N-100 by NMR - Interaction and complex formation between reactants and catalysts

To elucidate the mechanism of the catalyzed reaction of co-polyether (EO/THF) with N-100, the interaction and complex formation between reactants and catalysts were investigated by means of NMR spectroscopy. It is shown that the resonance peak of isocyanate carbon splits into two parts when the solutions of N-100 and co-polyether were mixed. The disappearing of proton resonance peak of hydroxyl group in NMR spectra when dibutyltin dilaurate(DBTDL) were added to the copolyether(THF/EO) solution indicates the complex formation, This interaction appears to be a bonding of tin to the oxygen of hydroxyl and make the hydrogen of the hydroxyl group very mobile and active, then exchange with other protons, In the case of triphenyl bismuth(TPB), the high field shift and intensity enhancement of proton peak were observed, which suggest a nucleophilic attack of the bismuth to the hydroxyl hydrogen.

Liquid chromatography amperometric detection of nitrite using a polypyrrole modified glassy carbon electrode doped with tungstodiphosphate anion

Chromatography-amperometric detection of nitrite with a polypyrrole modified glassy carbon electrode doped with tungstodiphosphate anion (Dawson-type P2W18O626-/PPy/GC electrode) based on its electrocatalytic reduction of nitrite is described. The cyclic and hydrodynamic voltammetry of nitrite at the P2W18O626-/PPy/GC electrode was studied. The factors affecting the detection of nitrite and the analytical performance of the modified electrode in flowing stream were investigated. The results show that the modified electrode has a good sensitivity (the limit of detection is 1 mu mol dm(-3)) and a satisfactory reproducibility (RSD = 3.78%, N = 21). The modified electrode was used in the chromatographic detection of nitrite spiked in the liquid from a tin of mushrooms and the mineralized spring water. It was found that the modified electrode exhibited good selectivity for nitrite.

Study on the microstructure and properties of nanosized stannic oxide powders

Stannic oxide xerogel was prepared by a forced hydrolysis method using SnCl4 as the precursor. The average grain sizes of the nanosized stannic oxide powders varied with the sintering temperatures. The powders were characterized by several different physico-chemical techniques. TEM was employed for the direct observation on grain sizes, shape and state of aggregation of the particles. XRD technique was used for the determination of the crystalline structure. Microstructural parameters of average crystallite size () and mean-square root microstrain (epsilon(2)>(1/2)) for the samples were calculated from the broadened values of the half-peak intensity of XRD. The atomic ratio between oxygen and tin in the surface region of the particles was estimated through the analysis of XPS. Attributing to lots of oxygen vacancies in the surface region of the nanoparticulates and the 'trapped electrons' in the vacancies, an ESR signal was observed in the sample sintered at 300 degrees C for 2 h. FTIR of the powders showed that intensity of the transverse optical mode of Sn-O stretching vibration increased with the sintering temperature while the bending vibration of O-Sn-O showed a blue shift. For Raman spectra, very important spectral characteristics such as variations of intensity and width of the bands were observed. A new Raman vibrational band located at 572 cm(-1) was identified in the samples of nanosized stannic oxide powders. Variation of these spectroscopic properties were strongly affected by grain size, shape and state of aggregation of the nanosized particulates.

The fabrication of dipped CdS and sputtered ITO thin films for photovoltaic solar cells

Stable bilayer thin films of indium tin oxide (ITO) on CdS and CdS on ITO were formed for the window material of solar cells by chemical bath and sputtering methods. Scanning electron microscopy and X-ray diffraction studies have shown that both the ITO and CdS films are continuous, homogeneous, with high compactness. Measurement of the CdS film thickness across the 2 x 4 cm(2) reveals the good uniformity of these films. Four-point probe measurements show that the resistivity of a CdS film on an ITO surface is much better than that of the single CdS film The thermal stability of an ITO/CdS bilayer, interfacial reaction and optical transmittance were investigated at different annealing temperatures and environments (air, vacuum and N-2 + H-2). The results showed that the ITO/CdS bilayer film is a good window material for the CuInSe2 and CdTe cells. It is a simple method using a small amount of the cadmium compound.

Reactions of C-60 with R(3)SnH: A new synthetic route to C-60(RH)(n) and the property of C-60 to catalyze radical reactions

A new method for the preparation of polyalkyl and polyarenefullerene derivatives C-60(RH)(n)(R=Bu,n=1-3; R=Ph,n=1-10) by the reaction of C-60 with organotin hydride in toluene is described. Another series of products of stannanes R(a)Sn(b)H(c) (R=Bu, a=3-8, b=1-4, c=0-3 R=Ph, a=3-11, b=1-5, c=0-4) were also obtained, which shows that C-60 can catalyze polymerization of organic-tin. These products were determined by mass and infrared spectrometry. And the possible reaction mechanisms are discussed.

Synthesis and structures of the complexes of beta-alkoxycarbonylethyltin trichlorides with N-aryl-2-hydroxyacetophenylideneimines

Sixteen novel beta-alkoxycarbonylethyltin trichlorides and the corresponding N-aryl-2-hydroxyacetophenylideneimines complexes have been synthesized and characterized. An X-ray crystal structure analysis of the complex of beta-methyloxycarbonylethyltin trichloride and N-4-methylphenyl-2-hydroxyacetophenylideneimine has been performed, The crystal belongs to space group , The cell parameters are: a = 1.0201(6) nm, b = 1.082 2(4) nm, c = 1.394 9(6) nm, alpha = 99.88(3)degrees, beta = 98.63(4)degrees, gamma = 97.86(4)degrees, Z = 2, The ligands coordinate to tin atom via phenolic oxygen atom. Coordination of carbonyl oxygen atom to tin atom still exists in the complexes, The coordination number of tin atom is 6.

A study of the radical reaction of C-60 with n-Bu(3)SnH

The reaction of buckministerfullerene (C-60) with tri-n-blltyltin hydride(n-Bu(3)SnH) in toluene solution has been investigated. According to mass spectrometry analysis, the products of above reaction are C-60(BuH)(n)(n = 1 similar to 3) and Bu(x)Sn(y)H(x) (x = 3 similar to 8, y = 1 similar to 4,approximate to = 0 similar to 3). The reaction maybe provide a new method for the synthesis of alkylated fullerene derivatives. Where C-60 also takes a role of a catalysis of organtic-tin polymerization. The radical reaction mechanism has been discussed.

Synthesis and structure of 1:1 complex of ethylphenyltin dichloride with N-4-methoxyphenyl-2-hydroxynaphthylideneimine

A novel organotin complex, EtPhSnCl(2) . 2HOC(10)H(6)CH = NC6H1OCH3 was synthesized, and its crystal structure was determined by X-ray diffraction method. The crystal is triclinic, belonging to space group, with unit cell parameters a = 1.150 8(5) nm, b = 1. 153 1(5) gm, c = 1. 004 6 (3) nm, alpha = 94. 15 (3)degrees, beta = 115.47 (3)degrees, r = 85. 94 (4)degrees, V = 1199 7(1) nm(3), Z=2, D-c=1.68 g/cm(3), mu=13. 20 cm(-1), F(000)=618 for 4 131 reflections tions. R=0. 047, R(w)=0. 047. The ligand coordinates to tin atom via phenolic oxygen atom. The complex has a distored trigonal bipyramidal structure, the phenolic oxygen atom of the ligand and one of two chlorine atoms occupy the axial position. The distance between noncoodinated nitrogen atom with phenolic oxygen atom is 0. 257 4 nm, which indicates that the intramolecular hydrogen bond of Schiff base ligand is retained in the complex.

VOLTAMMETRY OF CYTOCHROME-C ENTRAPPED IN HYDROGEL MEMBRANE ON GRAPHITE ELECTRODE

The voltammetric behavior of cytochrome c entrapped in hydrogel membranes at paraffin wax-impregnated spectroscopic graphite electrodes (WISGE) was studied in this paper. A pair of well-defined peaks appeared at +70 mV (vs. Ag/AgCl). Beside these two peaks, another pair of peaks emerged at around +225 mV. Further investigations suggested that at least three states of cytochrome c existed in the membranes due to the special structure of the hydrogel. The native conformation of cytochrome c molecules was stabilized by the hydrophilic environment that was formed by the hydroxyl structure of the membranes and facilitated the cytochrome c electron transfer reaction at +70 mV. The molecules directly adsorbed on the surface of the graphite electrode were responsible for the redox peaks at around +225 mV. Whether the adsorption peaks were detectable or not was related to the thickness of membranes and the pre-retaining time before the formation of membranes.

Crystal and molecular structure of the complex of methoxycarbonylethyltin trichloride with salicylidene-m-toluidine

The synthesis and properties of the title complex CH3OCOCH2CH2SnCl3.2-HOC6H4CH=NC6H4-3'-CH3 are described. It crystallizes from benzene in the monoclinic space group P2(1/n) with unit cell dimensions a=10.326 (C),b=6.815(8), c=12.931(6) Angstrom, beta =111.52(3,)degrees, V=2088.7(1) Angstrom (3), Z=4, F(000) =1040, mu =16.31 cm(-1), Dc=1. 67g/cm(3) final R factor is 0.037 for 3177 observed reflections, 1 greater than or equal to3 sigma (1(0)). The tin atom in the structure of the complex exists in a distored octahedral geometry defined by three Cl atoms, the C and O atoms of a chelating methoxycarbonylethyl. group as well as an O atom derived from the Schiff base ligand.

SYNTHESIS AND MOLECULAR-STRUCTURE OF NBU2[(MEO)3C6H2C(O)N2CHC6H4O]SN FORMED IN THE REACTION OF DI-N-BUTYLTIN(IV) OXIDE WITH 3,4,5-TRIMETHOXY-BENZOYL SALICYLAHYDRAZONE

The title complex was synthesized and characterized by H-1, C-13, Sn-119 NMR and IR spectra. A single crystal X-ray diffraction study confirmed its molecular structure and revealed that 3,4,5-trimethoxy-benzoyl salicylahydrazone was a tridentate and approximately planar ligand. The complex crystallizes in the triclinic space group P1BAR with a = 9.208(3), b = 12.536(2), c = 12.187(4) angstrom, alpha = 113.12(2), beta = 90.58(2), gamma = 81.42(2), V = 1277.5(6) angstrom, Z = 2. The structure was refined to R = 0.033 and R(w) = 0.041 for 3944 observed independent reflections. The tin atom has a distorted trigonal bipyramidal coordination. The Sn-C bond lengths are 2.129(5) and 2.113(5) angstrom (av. 2.121(5) angstrom), the C-Sn-C angle is 123.3(2); the bond length between the tin atom and the chelating nitrogen is 2.173(3) angstrom. Two chain carbon atoms and the chelating nitrogen atom occupy the basal plane. The skeleton of two erect oxygen atoms and the tin atom is bent (O-Sn-O angle = 153.5(1)). In the complex, the ligand exists in the enol-form.

CYCLIC VOLTAMMETRIC AND SPECTROELECTROCHEMICAL STUDIES OF COPPER IN ALKALINE-SOLUTION

The behaviour of the electroplated copper film electrode on tin oxide/glass or glassy carbon surface was studied in potassium hydroxide medium by cyclic voltammetry and in situ transmission spectroelectrochemistry. The results indicate that the electroplated copper film electrode is similar to a copper electrode and cyclic voltammetry with this electrode affords more resolution. The anodic peaks were found to correspond successively to the adsorption of oxygen, the formation of a surface layer of Cu2O, the formation of a surface layer of Cu(OH)2 or CuO and formation of a thick multilayer film of CuO. This is the first time it has been proposed that a surface layer of Cu(OH)2 or CuO is formed from the oxidation of the surface layer of Cu2O. Similarly, a clear interpretation is presented that the cathodic peaks correspond successively to the reduction of CuO to Cu2O, the reductions of Cu2O to Cu and the soluble Cu(II) species to Cu. On the other hand, a shoulder peak related to the chemical transformation of Cu(OH)2 to CuO was first observed.

STUDIES ON DEFECT STRUCTURE AND CATALYTIC PROPERTIES OF SN-MO OXIDES

The present work is devoted to the studies on relationship of structure and activity of Sn-Mo oxides by using XRD, ESR, IR, XPS, TEM and SEM. Eight samples with Mo/(Mo + Sn) rations: 0.0, 0.1, 0.2, 0.4, 0.6, 0.8, 0.9, 1.0 were prepared. On the basis of structure characterization, Sn-Mo oxides can be divided into three groups: Catalysts I with Mo/(Mo + So) less-than-or-equal-to 0.2, Catalysts II with 0.2 < Mo/(Mo + Sn) < 0.8, and catalysts III with Mo/(Mo + Sn) greater-than-or-equal-to 0.8. The solid solution of Mo5+ in tin oxide was formed and the cation vacancy was formed in catalysts I. The solid solution of Sn4+ in molybdenum oxide was formed in catalysts III. The lattice oxygen in catalysts III has higher mobility and reactivity than that in catalysts I. The catalysts III showed higher activity but lower selectivity than that of catalysts I.

胶州湾典型增养殖海域有害赤潮生消过程及关键因子研究

有害赤潮（Harmful algal blooms, HAB）已成为全球性的海洋灾害，对我国近海养殖业危害尤为巨大，研究赤潮发生、发展的主要环境影响因子，对于控制赤潮的发生以及加强赤潮的防治具有十分重要的意义。本文根据国家自然科学基金“九五”重大项目“中国沿海典型增养殖区有害赤潮发生动力学防治对策研究”项目组近年来对胶州湾东北部养殖海域的监测资料，分析了该海区营养状况，结合该区自然环境特点，探讨了发生于1998年7月和1999年6月两次硅藻赤潮的主要影响因子；并应用胶州现场海水进行了室内模拟培养实验，对影响有害赤潮生消过程的关键环境因子进行了分析探讨。对1998和1999年赤潮多发季节胶州湾东北部增养殖水域海水的营养状况进行了分析，并参照潜在性富营养化的概念，应用NQI指数对该海域的富营养化水平进行了评价。结果表明：（1）胶州湾东北部增养殖海域赤潮多发季节TIN、DIP和活性硅酸盐的含量均较高，远高于同期胶州湾大面观测站各营养盐的平均含量；该海域有机污染物含量相对营养盐含量不高。（2）该海域春季氮、磷营养盐含量充足，水域属富营养化平；夏季该海域具有较高的生物具，磷酸盐水平相对较低，海域多数时间属于磷限制潜在性富营养化水平；但这种限制极易为外界补充所改变，如陆源输入、养殖废水的排放等。（3）该海域为典型增养殖区，养殖废水对海域营养盐的补充有重要意义，因此应当加强对该海域养殖业的综合管理。对分别于1998年7月和1999年6月在胶州湾东北部增养殖海域发生的中肋骨条藻（Skeletonema costatum）赤潮和浮动弯角藻（Eucampia zoodiacus）赤潮生消过程中环境因子的变化进行了探讨。发生赤潮生物量的升高常伴随海水pH值、溶解氧（DO）含量的升高以及各营养盐（氮、磷、硅）含量的降低；认为在该海域较高营养盐含量和较高生物量的情况下，赤潮发生前大规模的降雨过程及随后的气候条件为赤潮生物的快速生长繁殖创造了有利条件；无机磷和活性硅酸盐含量相对于无机氮显得较低，对该海域硅藻赤潮的生消过程起着控制作用。采集胶州湾现场海水进行了实验室模拟培养实验，对影响赤潮生消过程的主要环境因素进行了研究和探讨。结果表明，现场海水进行模拟培养时，排除了潮流、风以及水团间交流混合等因素对水体中浮游生物的影响，培养水体中的浮游植物生物量都存在增高的现象；在氮、磷、硅等营养盐含量充足的条件下，浮游植物可快速进入指数增长期，并较快发展形成赤潮，高浓度的营养盐常导致培养水体中浮游植物的较高的生长速率，浮游植物对氮磷营养盐的吸收受到环境中营养盐含量的影响；初始环境下营养盐的限制可抑制浮游植物的进一步增殖，发生赤潮水体中某种营养盐的含量降低最终导致了赤潮的消亡。

On the crangonidae (Crustacea : Decapoda : Caridea) of the Philippines from the PANGLAO 2004 and PANGLAO 2005 expeditions

Eleven species of the caridean family Crangonidae are reported from the material collected by the Philippine PANGLAO 2004 and PANGLAO 2005 expeditions. Although they have been reported from the Philippines before, all the species have their colouration described and illustrated here for the first time.