A Capability Maturity Model to Assess Supply Chain Performance

In an overcapacity world, where the customers can choose from many similar products to satisfy their needs, enterprises are looking for new approaches and tools that can help them not only to maintain, but also to increase their competitive edge. Innovation, flexibility, quality, and service excellence are required to, at the very least, survive the on-going transition that industry is experiencing from mass production to mass customization. In order to help these enterprises, this research develops a Supply Chain Capability Maturity Model named S(CM)2. The Supply Chain Capability Maturity Model is intended to model, analyze, and improve the supply chain management operations of an enterprise. The Supply Chain Capability Maturity Model provides a clear roadmap for enterprise improvement, covering multiple views and abstraction levels of the supply chain, and provides tools to aid the firm in making improvements. The principal research tool applied is the Delphi method, which systematically gathered the knowledge and experience of eighty eight experts in Mexico. The model is validated using a case study and interviews with experts in supply chain management. The resulting contribution is a holistic model of the supply chain integrating multiple perspectives, and providing a systematic procedure for the improvement of a company’s supply chain operations.

Reduced calcification decreases photoprotective capability in the Coccolithophorid Emiliania huxleyi

Intracellular calcification of coccolithophores generates CO2 and consumes additional energy for acquisition of calcium and bicarbonate ions; therefore, it may correlate with photoprotective processes by influencing the energetics. To address this hypothesis, a calcifying Emiliania huxleyi strain (CS-369) was grown semi-continuously at reduced (0.1 mM, LCa) and ambient Ca2+ concentrations (10 mM, HCa) for 150 d (>200 generations). The HCa-grown cells had higher photosynthetic and calcification rates and higher contents of Chl a and carotenoids compared with the naked (bearing no coccoliths) LCa-grown cells. When exposed to stressfull levels of photosynthetically active radiation (PAR), LCa-grown cells displayed lower photochemical yield and less efficient non-photochemical quenching (NPQ). When the LCa- or HCa-grown cells were inversely shifted to their counterpart medium, LCa to HCa transfer increased photosynthetic carbon fixation (P), calcification rate (C), the C/P ratio, NPQ and pigment contents, whereas those shifted from HCa to LCa exhibited the opposite effects. Increased NPQ, carotenoids and quantum yield were clearly linked with increased or sustained calcification in E. huxleyi. The calcification must have played a role in dissipating excessive energy or as an additional drainage of electrons absorbed by the photosynthetic antennae. This phenomenon was further supported by testing two non-calcifying strains, which showed insignificant changes in photosynthetic carbon fixation and NPQ when transferred to LCa conditions

From Customer-Oriented Strategy to Organizational Financial Performance: The Role of Human Resource Management and Customer-Linking Capability

Drawing on the organizational capabilities literature, the authors developed and tested a model of how supportive human resource management (HRM) improved firms’ financial performance perceived by marketing managers through fostering the implementation of a customer-oriented strategy. Customer-linking capability, which is the capability in managing close customer relationships, indicated the implementation of the customer-oriented strategy. Data collected from two emerging economies – China and Hungary –established that supportive HRM partially mediated the relationship between customer-oriented strategy and customer-linking capability. Customer-linking capability further explained how supportive HRM contributed to perceived financial performance. This study explicates the implication of customer-oriented strategy for HRM and reveals the
importance of HRM in strategy implementation. It also sheds some light on the ‘black box’ between HRM and performance. While making important contributions to the field of strategy, HRM and marketing, this study also offers useful practical implications.

Algoritmi per il calcolo parametrico delle curve a "V" e delle curve di "Capability" delle macchine sincrone

Nell'elaborato, dopo una breve descrizione di come vengono suddivise le macchine elettriche a seconda che vi siano o meno parti in movimento al loro interno, vengono esaminati inizialmente gli aspetti teorici che riguardano le macchine sincrone a poli lisci ed a poli salienti prendendo in esame anche quelli che sono i provvedimenti necessari a ridurre il contributo dei campi armonici di ordine superiore. Per questo tipo di macchine, spesso utilizzate in centrale per la pruduzione dell'energia elettrica, risultano di fondamentale importanza le curve a "V" e le curve di "Capability". Esse sono strumenti che permettono di valutare le prestazioni di tali macchine una volta che siano noti i dati di targa delle stesse. Lo scopo della tesi è pertanto quello di sviluppare un software in ambiente Matlab che permetta il calcolo automatico e parametrico di tali curve al fine di poter ottimizzare la scelta di una macchina a seconda delle esigenze. Nel corso dell'eleaborato vengono altresì proposti dei confronti su come varino tali curve, e pertanto i limiti di funzionamento ad esse associati, al variare di alcuni parametri fondamentali come il fattore di potenza, la reattanza sincrona o, nel caso di macchine a poli salienti, il rapporto di riluttanza. Le curve di cui sopra sono state costruite a partire da considerazioni fatte sul diagramma di Behn-Eschemburg per le macchine isotrope o sul diagramma di Arnold e Blondel per le macchine anisotrope.

Construção das capacidades organizacionais de tecnologia da informação no contexto dos sistemas institucionais integrados de gestão da UFRN

The IT capability is a organizational ability to perform activities of this role more effectively and an important mechanism in creating value. Its building process (stages of creation and development) occurs through management initiatives for improvement in the performance of their activities, using human resources and IT assets complementary responsible for the evolution of their organizational routines. This research deals with the IT capabilities related to SIG (integrated institutional management systems), built and deployed in UFRN (Universidade Federal do Rio Grande do Norte) to realization and control of administrative, academic and human resources activities. Since 2009, through cooperative agreements with federal and educational institutions of direct administration, UFRN has supported the implementation of these systems, currently involving more than 30 institutions. The present study aims to understand how IT capabilities, relevant in the design, implementation and dissemination of SIG, were built over time. This is a single case study of qualitative and longitudinal nature, performed by capturing, coding and analysis from secondary data and from semi-structured interviews conducted primarily with members of Superintenência de Informática, organizational unit responsible for SIG systems in UFRN. As a result, the technical, of internal relationship and external cooperation capabilities were identified as relevant in the successful trajectory of SIG systems, which have evolved in different ways. The technical capacity, initiated in 2004, toured the stages of creation and development until it reached the stage of stability in 2013, due to technological limits. Regarding the internal relationship capability, begun in 2006, it toured the stages of creation and development, having extended its scope of activities in 2009, being in development since then. Unlike the standard life cycle observed in the literature, the external cooperation capability was initiated by an intensity of initiatives and developments in the routines in 2009, which were decreasing to cease in 2013 in order to stabilize the technological infrastructure already created for cooperative institutions. It was still identified the start of cooperation in 2009 as an important event selection, responsible for changing or creating trajectories of evolution in all three capacities. The most frequent improvements initiatives were of organizational nature and the internal planning activity has been transformed over the routines of the three capabilities. Important resources and complementary assets have been identified as important for the realization of initiatives, such as human resources technical knowledge to the technical capabilities and external cooperation, and business knowledge, for all of them, as well as IT assets: the iproject application for control of development processes, and the document repository wiki. All these resources and complementary assets grew along the capacities, demonstrating its strategic value to SINFO/UFRN

Tissue engineering: technological advances to improve its applications in reconstructive surgery

Background. Tremendous advances in biomaterials science and nanotechnologies, together with thorough research on stem cells, have recently promoted an intriguing development of regenerative medicine/tissue engineering. The nanotechnology represents a wide interdisciplinary field that implies the manipulation of different materials at nanometer level to achieve the creation of constructs that mimic the nanoscale-based architecture of native tissues. Aim. The purpose of this article is to highlight the significant new knowledges regarding this matter. Emerging acquisitions. To widen the range of scaffold materials resort has been carried out to either recombinant DNA technology-generated materials, such as a collagen-like protein, or the incorporation of bioactive molecules, such as RDG (arginine-glycine-aspartic acid), into synthetic products. Both the bottom-up and the top-down fabrication approaches may be properly used to respectively obtain sopramolecular architectures or, instead, micro-/nanostructures to incorporate them within a preexisting complex scaffold construct. Computer-aided design/manufacturing (CAD/CAM) scaffold technique allows to achieve patient-tailored organs. Stem cells, because of their peculiar properties - ability to proliferate, self-renew and specific cell-lineage differentiate under appropriate conditions - represent an attractive source for intriguing tissue engineering/regenerative medicine applications. Future research activities. New developments in the realization of different organs tissue engineering will depend on further progress of both the science of nanoscale-based materials and the knowledge of stem cell biology. Moreover the in vivo tissue engineering appears to be the logical step of the current research.

Assessing a Methodological Proposal for the Design, Creation and Evaluation of Learning Objects Oriented to Educators with Diverse Educational and Technological Competencies

This paper describes a methodological proposal for the design, creation and evaluation of Learning Objects (LOs). This study arises from the compilation and analysis of several LO design methodologies currently used in Ibero-America. This proposal, which has been named DICREVOA, defines five different phases: analysis, design (instructional and multimedia), implementation (LO and metadata), evaluation (from the perspective of both the producer and the consumer of the LO), and publishing. The methodology focuses not only on the teaching inexperienced, but also on those having a basic understanding of the technological and educational aspects related to LO design; therefore, the study emphasizes LO design activities centered around the Kolb cycle and the use of the ExeLearning tool in order to implement the LO core. Additionally, DICREVOA was used in a case study, which demonstrates how it provides a feasible mechanism for LO design and implementation within different contexts. Finally, DICREVOA, the case study to which it was applied, and the results obtained are presented

Building digital capability: Employability lens on the Six Elements of Digital Capability

This is a version of the Jisc ‘Six Elements of Digital Capabilities’ model, developed to support student-facing sta working in Careers and Employability roles and curriculum sta working to embed employability issues into the curriculum. It draws on the work of the Jisc Developing Student Employability project e.g. on the model of the ‘employable student’ produced by Peter Chatterton for that project.

Direction, legitimacy and structuration in technological innovation systems upscaling-insights from roadmaps for deepwater offshore wind energy

This research investigates strategies aiming to accelerate the up-scaling of low- carbon innovations. We adopt the technological innovation systems (TIS) perspective to focus on structuration or system building processes, including key innovative activities. We analyze national roadmaps that have been developed for offshore wind energy in deep waters - more than 50 meters deep where most of the potential is expected but whose technologyis more immature . in Europe. The roadmaps analysis not only reveals how actors expect the TIS grow but also enables the understanding about the critical functions at this stage, such as direction of search and legitimacy.

Dilemas éticos en niños con enfermedades neuromusculares y dependencias tecnológicas: Ethical dilemmas in children with neuromuscular diseases and technological dependencies

En los últimos años, los cuidados respiratorios especializados, y en particular los cuidados respiratorios no invasivos y otros avances tecnológicos han contribuido a una mejor calidad de vida y sobrevida de los pacientes con enfermedades neuromusculares. La naturaleza de las opciones terapéuticas (como ser la ventilación invasiva versus ventilación no invasiva, las cargas psicológicas, sociales y financieras) tienen ramificaciones éticas. Por lo tanto resulta esencial que los médicos comprendan todas las opciones terapéuticas y los factores psicosociales al informar a sus pacientes, en lo que tiene que ver con sus ventajas y desventajas y sus costos asociados, de modo que los padres puedan tomar decisiones informadas. Los nuevos desarrollos incluyen exámenes prenatales y neonatales más precisos, nuevas terapias genéticas y soporte respiratorio no invasivo para evitar episodios de fallas respiratorias y vías aéreas invasivas. Al empoderar a los pacientes y sus familias para educar y capacitar servicios personales de cuidados para que no deban depender de las instituciones y servicios de enfermería constante, y los recientes avances tecnológicos facilitan su permanencia en el hogar y dejan de estar atados a una vida dependiendo de la institución y los servicios de enfermería. Estos últimos infantilizan a los pacientes en lugar de promover su autonomía. Las consideraciones financieras, las terapias genéticas, el screening prenatal y las distintas opciones terapéuticas que promueven la autonomía, todos tienen implicancias éticas. Algunos de los avances discutidos en este artículo requieren un cambio de paradigma en la forma en que los médicos ven y tratan a estos individuos.