Entsyymien talteenotto ja kierrätys selluloosaetanolin valmistuksessa

Bioetanolin valmistus selluloosapitoisista raaka-aineista vaatii selluloosapolymeerien pilkkomisen liukoisiksi sokereiksi. Tämä voidaan toteuttaa entsymaattisella hydrolyysillä. Selluloosan pilkkomiseen tarkoitetut entsyymit, sellulaasit, ovat entsymaattisen hydrolyysin jälkeen sitoutuneet joko kiintoainefaasiin tai ovat nestemäisessä faasissa ns. vapaina entsyymeinä. Prosessin taloudellisuuden kannalta on erityisen tärkeää minimoida siinä käytettävien entsyymien tarve, sillä tehokkaat entsyymivalmisteet ovat suhteellisen kalliita. Yksi varteenotettava vaihtoehto bioetanoliprosessin saamiseksi taloudellisemmaksi on käytettyjen entsyymien talteenotto ja kierrätys. Työn tarkoituksena oli selvittää kirjallisuudesta, millaisia menetelmiä on kehitetty entsyymien talteenottoon ja kierrätykseen lignoselluloosasta valmistettavan bioetanolin valmistuksessa. Työssä on keskitytty tuoreisiin tutkimuksiin ja menetelmien käyttökelpoisuuteen ja taloudellisuuteen. Viime vuosina sellulaasien talteenotto- ja kierrätysmenetelmiä koskevat tutkimukset ovat keskittyneet pääasiassa käsittelemään nanopartikkelien avulla tapahtuvaa entsyymien immobilisointia, ultrasuodatusta, erilaisia desorptiomenetelmiä, kiinteän hydrolyysijäännöksen kierrättämistä, tuoreen substraatin lisäämistä sekä myös tislausvaiheen jälkeistä entsyymien kierrättämistä. Jotta kierrätysmenetelmä olisi tehokas, tulisi sen pyrkiä säilyttämään entsyymien aktiivisuuksia, sokerisaantoa menettämättä ja sisältää sekä neste-, että kiintoainefaasista tapahtuva kierrätys. Jokaisella kierrätysmenetelmällä on hyvät ja huonot puolensa. Entsyymien talteenottoastetta saadaan kuitenkin parannettua yhdistämällä erilaisia menetelmiä. Useista tutkimuksista huolimatta, taloudellisinta ja käyttökelpoisinta entsyymien talteenotto- ja kierrätysmenetelmää ei ole vielä saavutettu.

Large-eddy simulation of wind flows over complex terrains for wind energy applications

Wind energy has obtained outstanding expectations due to risks of global warming and nuclear energy production plant accidents. Nowadays, wind farms are often constructed in areas of complex terrain. A potential wind farm location must have the site thoroughly surveyed and the wind climatology analyzed before installing any hardware. Therefore, modeling of Atmospheric Boundary Layer (ABL) flows over complex terrains containing, e.g. hills, forest, and lakes is of great interest in wind energy applications, as it can help in locating and optimizing the wind farms. Numerical modeling of wind flows using Computational Fluid Dynamics (CFD) has become a popular technique during the last few decades. Due to the inherent flow variability and large-scale unsteadiness typical in ABL flows in general and especially over complex terrains, the flow can be difficult to be predicted accurately enough by using the Reynolds-Averaged Navier-Stokes equations (RANS). Large- Eddy Simulation (LES) resolves the largest and thus most important turbulent eddies and models only the small-scale motions which are more universal than the large eddies and thus easier to model. Therefore, LES is expected to be more suitable for this kind of simulations although it is computationally more expensive than the RANS approach. With the fast development of computers and open-source CFD software during the recent years, the application of LES toward atmospheric flow is becoming increasingly common nowadays. The aim of the work is to simulate atmospheric flows over realistic and complex terrains by means of LES. Evaluation of potential in-land wind park locations will be the main application for these simulations. Development of the LES methodology to simulate the atmospheric flows over realistic terrains is reported in the thesis. The work also aims at validating the LES methodology at a real scale. In the thesis, LES are carried out for flow problems ranging from basic channel flows to real atmospheric flows over one of the most recent real-life complex terrain problems, the Bolund hill. All the simulations reported in the thesis are carried out using a new OpenFOAM® -based LES solver. The solver uses the 4th order time-accurate Runge-Kutta scheme and a fractional step method. Moreover, development of the LES methodology includes special attention to two boundary conditions: the upstream (inflow) and wall boundary conditions. The upstream boundary condition is generated by using the so-called recycling technique, in which the instantaneous flow properties are sampled on aplane downstream of the inlet and mapped back to the inlet at each time step. This technique develops the upstream boundary-layer flow together with the inflow turbulence without using any precursor simulation and thus within a single computational domain. The roughness of the terrain surface is modeled by implementing a new wall function into OpenFOAM® during the thesis work. Both, the recycling method and the newly implemented wall function, are validated for the channel flows at relatively high Reynolds number before applying them to the atmospheric flow applications. After validating the LES model over simple flows, the simulations are carried out for atmospheric boundary-layer flows over two types of hills: first, two-dimensional wind-tunnel hill profiles and second, the Bolund hill located in Roskilde Fjord, Denmark. For the twodimensional wind-tunnel hills, the study focuses on the overall flow behavior as a function of the hill slope. Moreover, the simulations are repeated using another wall function suitable for smooth surfaces, which already existed in OpenFOAM® , in order to study the sensitivity of the flow to the surface roughness in ABL flows. The simulated results obtained using the two wall functions are compared against the wind-tunnel measurements. It is shown that LES using the implemented wall function produces overall satisfactory results on the turbulent flow over the two-dimensional hills. The prediction of the flow separation and reattachment-length for the steeper hill is closer to the measurements than the other numerical studies reported in the past for the same hill geometry. The field measurement campaign performed over the Bolund hill provides the most recent field-experiment dataset for the mean flow and the turbulence properties. A number of research groups have simulated the wind flows over the Bolund hill. Due to the challenging features of the hill such as the almost vertical hill slope, it is considered as an ideal experimental test case for validating micro-scale CFD models for wind energy applications. In this work, the simulated results obtained for two wind directions are compared against the field measurements. It is shown that the present LES can reproduce the complex turbulent wind flow structures over a complicated terrain such as the Bolund hill. Especially, the present LES results show the best prediction of the turbulent kinetic energy with an average error of 24.1%, which is a 43% smaller than any other model results reported in the past for the Bolund case. Finally, the validated LES methodology is demonstrated to simulate the wind flow over the existing Muukko wind farm located in South-Eastern Finland. The simulation is carried out only for one wind direction and the results on the instantaneous and time-averaged wind speeds are briefly reported. The demonstration case is followed by discussions on the practical aspects of LES for the wind resource assessment over a realistic inland wind farm.

Naudanlanta biokaasulaitosraaka-aineena, käsittely ja logistiikka

Maatalouden lietelannasta saatavien ravinteiden talteenotto ja kierrätys ovat viime aikoina nousseet yhä tärkeämmäksi tavoitteeksi. Ravinteiden tehokas kierrätystapa saadaan ai-kaiseksi käsittelemällä lietelantaa. Lannan käsittelyketjuja on monenlaisia; tässä työssä naudan lannan käsittelyketju muodostuu separoinnista ja mädätyksestä. Tämän diplomityön tarkoituksena oli selvittää naudan lannan mekaanisen separoinnin ja logistiikan kannattavuus märkämädätys- ja kuivamädätyskäsittelyketjussa. Käsittelyketju-jen kannattavuus tai kannattamattomuus on esitetty eri skenaarioissa muodostettujen kus-tannuslaskentojen perusteella. Skenaarioiden kustannuslaskelmat ovat toisiinsa verratta-vissa, jolloin ne voidaan asettaa niin ikään paremmuusjärjestykseen. Viides skenaario ei ole suoraan verrattavissa muihin skenaarioihin, koska siinä lannankäsittelyketjua on tar-kasteltu eri näkökulmasta, keskittämällä suurimmalle maatilalle. Mekaanisista separaattoreista tarkasteltiin työssä ruuvipuristinta, dekantterilinkoa ja ul-koistettua separointipalvelua. Lannan logistiikkakustannuksissa huomioitiin lannan kulje-tusta traktori- ja säiliöautolla tai traktorilla. Separoinnin kustannus liitettiin osaksi logis-tiikkakustannusta. Työn tuloksien perusteella voidaan todeta dekantterilingon separointi-kustannuksen olevan taloudellisesti kannattamattomin johtuen pienestä lantakapasiteetista ja separaattorin korkeasta investointihinnasta. Ravinteiden osalta linko osoittautui tehok-kaimmaksi menetelmäksi erottamaan ravinteet eri jakeisiin. Lannan käsittely separointipalvelulla oli edullisin skenaario, jonka vuosittaiseksi kustan-nukseksi saatiin säiliö- ja kuorma-autolla lantaa kuljetettaessa 58 700 € ja traktorilla kul-jetettaessa 60 400 €. Kallein lannan käsittely oli dekantterilingolla, jonka vuosittaiseksi kustannukseksi saatiin lantaa säiliö- ja kuorma-autolla kuljetettaessa 121 000 € ja trakto-rilla kuljetettaessa 123 300 €. Lannan separointi maatilalla osoittautui kannattavammaksi kuin käsittelemättömän lietteen kuljetus biokaasulaitokselle.

Glutathione and the redox control system trypanothione/trypanothione reductase are involved in the protection of Leishmania spp. against nitrosothiol-induced cytotoxicity

Glutathione is the major intracellular antioxidant thiol protecting mammalian cells against oxidative stress induced by oxygen- and nitrogen-derived reactive species. In trypanosomes and leishmanias, trypanothione plays a central role in parasite protection against mammalian host defence systems by recycling trypanothione disulphide by the enzyme trypanothione reductase. Although Kinetoplastida parasites lack glutathione reductase, they maintain significant levels of glutathione. The aim of this study was to use Leishmania donovani trypanothione reductase gene mutant clones and different Leishmania species to examine the role of these two individual thiol systems in the protection mechanism against S-nitroso-N-acetyl-D,L-penicillamine (SNAP), a nitrogen-derived reactive species donor. We found that the resistance to SNAP of different species of Leishmania was inversely correlated with their glutathione concentration but not with their total low-molecular weight thiol content (about 0.18 nmol/10(7) parasites, regardless Leishmania species). The glutathione concentration in L. amazonensis, L. donovani, L. major, and L. braziliensis were 0.12, 0.10, 0.08, and 0.04 nmol/10(7) parasites, respectively. L. amazonensis, that have a higher level of glutathione, were less susceptible to SNAP (30 and 100 µM). The IC50 values of SNAP determined to L. amazonensis, L. donovani, L. major, and L. braziliensis were 207.8, 188.5, 160.9, and 83 µM, respectively. We also observed that L. donovani mutants carrying only one trypanothione reductase allele had a decreased capacity to survive (~40%) in the presence of SNAP (30-150 µM). In conclusion, the present data suggest that both antioxidant systems, glutathione and trypanothione/trypanothione reductase, participate in protection of Leishmania against the toxic effect of nitrogen-derived reactive species.

An Update on Inter-Country Differences in Recovery and Utilization of Recycled Paper

The use of recovered paper as raw material in the paper and board industry has increased heavily during recent decades. At the same time, growing environmental awareness has raised the interest in recycling and a more sustainable way of living, at least in high-income countries. This paper combines these topics and explores how economic, demographic and environmental factors have affected the recovery and utilization of recycled paper between 1992 and 2010 in a sample of 70 countries. This study updates and extends the previous research on the topic using panel data and panel data estimation methods. The results confirm the roles of economic determinants but also indicate that concern for the environment impacts the recovery of recycled paper particularly in high-income countries. Moreover, the motives for recycling appear to depend on the income level of a country, which is something that future policies should consider.

Wooden packaging waste reuse and refining

The aim of the thesis was both to study wooden packaging waste reuse and refining generated in the forestry machine factory environment, and to find alternative wooden packaging waste utilization options in order to create a new operating model which would decrease the overall amount of waste produced. As environmental and waste legislation has become more rigid and companies' own environmental management systems’ requirements and control have increased, companies have had to consider their environmental aspects more carefully. Companies have to take into account alternative ways of reducing waste through an increase in reuse and recycling. A part of this waste is from different forms of packaging. In the metal industry the most heavily used packaging material is wooden packaging, as such material is heavy and the packaging has to be able to bear heavy stress. In the theoretical part of the thesis, the requirements of packaging and packaging waste legislation, as well as environmental management systems governing companies’ processing of their packaging waste, are studied. The theoretical part includes a process study of systems, which direct packaging waste and wooden packaging waste refining. In addition, methods related to the continuous improvement of these processes are introduced. This thesis concentrates on designing and creating a new operating model in relation to wooden packaging waste processing. The main target was to find an efficient model in order to decrease the total amount of wooden packaging waste and to increase refining. The empirical part introduces methods for approaches to wooden packaging waste re-utilization, as well as a description of a new operating model and its impact.

Espoon puhdistamolietteen käsittelymenetelmien selvitys Ämmässuon käsittelykeskukselle

Ravinteiden kierrätys yhä enemmän luonnonvaroja kuluttavassa yhteiskunnassa on noussut tärkeäksi. Hyötykäyttämällä luonnollisesti syntyvät orgaaniset virrat yhteiskunnasta voidaan kierrättää pellolta nostetut ravinteet takaisin. Tässä diplomityössä on tarkasteltu Helsingin seudun ympäristöpalveluiden toteuttamaa mädätetyn puhdistamolietteen käsittelyä ja pohdittu sen käsittelymahdollisuuksia erityisesti Ämmässuon käsittelykeskuksessa. Tarkastelussa on keskitytty kahteen yleisimpään kompostointimenetelmään, eli auma- ja tunnelikompostointiin. Kompostointimenetelmien tarkastelussa on pyritty löytämään optimaalinen tukiaine sekä prosessiaika käsiteltävälle lietteelle Ämmässuolla olemassa olleilla resursseilla. Tutkimuksessa toteutettiin käytännön pilot -kokeita sekä toteutettiin teoreettista prosessin parametrien laskentaa mukaan lukien kustannukset ja resurssit. Tutkimuksen perusteella voidaan todeta, että kyseisen tyyppisellä käsittelyalueella tunneli-kompostointi on näillä parametreilla testattuna paras vaihtoehto. Menetelmällä voidaan saavuttaa nopeampi käsittelyaika sekä vähentää kompostoinnista aiheutuvia hajuhaittoja ympäristöön. Tukiaineseoksessa voidaan korvata yleisestikin käytetty turve vastaanotettavalla lehti-puru viherjäteseoksella sekä risuhakkeella ja prosessiaika on noin 12 -16 viikkoa. Käsittelyn kustannukset verrattuna tämän hetkiseen käsittelyyn Metsäpirtissä eivät olleet merkittävästi suuremmat ja ympäristövaikutusarvioinnin perusteella syntypaikkaa lähellä oleva käsittelyalue sekä prosessin pienemmät vaikutukset tuovat ympäristöedun käsittelylle Ämmässuolla.

Yhdyskuntajätteen mekaanisen erottelun erotustehokkuus

EU:n jätehierarkia asettaa jätteenkäsittelyssä materiaalien hyötykäytön energiahyötykäytön edelle. EU on asettanut korkeat tavoitteet jätteenkierrätykseen, 50 painoprosenttia kotitalousjätteestä on ohjattava kierrätykseen vuoteen 2020 mennessä. Suomessa kaatopaikoista on pyritty eroon lisäämällä jätteenpolttokapasiteettia. Jätteiden hyödyntämisen osalta tilanne Suomessa on hyvä, mutta kierrätystavoitteiden täyttyminen nykyisillä toimilla vaikuttaa epätodennäköiseltä. Tässä työssä selvitetään mitä mekaanisia jätteen erottelumenetelmiä maailmalla on käytössä ja kuinka tehokkaita ne ovat. Työn tavoitteena on tutkia voitaisiinko kierrätystä Suomessa tehostaa yhdyskuntajätteen mekaanisella käsittelyllä. Kirjallisuusselvityksen lisäksi työssä on simuloitu mekaanisia erotteluketjuja ja verrattu niillä saatuja tuloksia Suomen syntypaikkalajittelun tasoon. Tämän tutkimuksen perusteella, mikään yksittäinen mekaaninen erottelumenetelmä ei riittävän tehokas erottelemaan kierrätettäviä materiaaleja yhdyskuntajätteestä. Mekaanisia erottelumenetelmiä tulee yhdistää lajittelulinjastoiksi, joiden optimoiminen on monen tekijän summa. Lajittelulinjaston suunnitteluun vaikuttavat muun muassa lähtömateriaalin laatu ja lopputuotteiden käyttötarkoitukset. Yhdyskuntajätteen sisältämä biojäte likaa herkästi muut jätteet ja vaikeuttaa mekaanisesti eroteltujen jätejakeiden uudelleenkäyttöä. Biojätteen poistaminen muiden jätteiden joukosta olisi ensiarvoisen tärkeää mekaanisen erotuksen tehokkuuden kannalta. Mekaaniset erotteluketjut poistavat tehokkaasti biojätettä ja metalleja, mutta lasin ja kuitujen osalta erotusketjujen tehokkuudet jäävät alhaisiksi. Muovien osalta mekaaninen erottelu voi parhaimmillaan ollaan erittäin tehokasta, toisaalta vaatimukset lähtömateriaalin laadulle ovat suuret. Muovien osalta syntypaikkalajittelun ja mekaanisen erottelun yhtäaikainen tehostaminen voisi tarjota ratkaisun kierrätysasteen nostamiseen.

Glukoosi-fruktoosisiirapin kromatografinen fraktiointi

Kuluttajamarkkinoilla on suuri kysyntä vähäkalorisille ruuille ja juomille. Näitä tuotteita voidaan valmistaa mm. korvaamalla makeuttimena perinteisesti käytetty sakkaroosi fruktoosilla joka on 73% makeampi ja sisältää vähemmän kaloreita kuin sakkaroosi. Koska fruktoosi on makeampaa kuin sakkaroosi, sitä tarvitaan vähemmän elintarvikkeissa saman makeusasteen saavuttamiseksi. Glukoosi-fruktoosisiirappia valmistetaan maissista tai sakkaroosista hydrolyysin avulla. Teollisuudessa glukoosi-fruktoosisiirapin fraktiointi tehdään käyttämällä jatkuvatoimista simuloitu liikkuva peti-prosessia (Simulated Moving Bed, SMB-prosessi). Tässä työssä tutkitaan voidaanko kierrätyskromatografiaa (Steady State Recycling , SSR-prosessi) käyttäen fraktioida glukoosi-fruktoosisiirappia tehokkaasti. Fruktoosi erotetaan glukoosista käyttämällä erotusmateriaalina vahvoja kationinvaihtohartseja kalsium-muodossa. Työssä tehtiin kirjallisuusselvitys, jonka perusteella valittiin sopiva erotusmateriaali ja koeolosuhteet. Kokeellisessa osassa glukoosille ja fruktoosille määritettiin adsorptioisotermit Frontal analysis -menetelmällä. Kokeellisesti määritettyihin isotermeihin sovitetut mallit validoitiin ja SSR-prosessi suunniteltiin panoserotuskokeiden avulla. SSR-prosessia mallinnettiin käyttäen MATLAB-ohjelmaa.

Increased expression of keratinase and other peptidases by Candida parapsilosis mutants

Keratinases are enzymes of great importance involved in pathogenic processes of some fungi. They also have a widespread ecological role since they are responsible for the degradation and recycling of keratin. On the one hand, studying them furthers our knowledge of pathogenicity mechanisms, which has important implications for human health, and on the other hand, understanding their ecological role in keratin recycling has biotechnological potential. Here, a wild-type keratinolytic Candida parapsilosis strain isolated from a poultry farm was treated with ethyl methanesulfonate in order to generate mutants with increased keratinase activity. Mutants were then cultured on media with keratin extracted from chicken feathers as the sole source of nitrogen and carbon. Approximately 500 mutants were screened and compared with the described keratinolytic wild type. Three strains, H36, I7 and J5, showed enhanced keratinase activity. The wild-type strain produced 80 U/mL of keratinolytic activity, strain H36 produced 110 U/mL, strain I7, 130 U/mL, and strain J5, 140 U/mL. A 70% increase in enzyme activity was recorded for strain J5. Enzymatic activity was evaluated by zymograms with proteic substrates. A peptidase migrating at 100 kDa was detected with keratin, bovine serum albumin and casein. In addition, a peptidase with a molecular mass of 50 kDa was observed with casein in the wild-type strain and in mutants H36 and J5. Gelatinase activity was detected at 60 kDa. A single band of 35 kDa was found in wild-type C. parapsilosis and in mutants with hemoglobin substrate.

Green Service Level Agreement under Sustainability Lens in IT Industry

Nowadays, when most of the business are moving forward to sustainability by providing or getting different services from different vendors, Service Level Agreement (SLA) becomes very important for both the business providers/vendors and as well as for users/customers. There are many ways to inform users/customers about various services with its inherent execution functionalities and even non-functional/Quality of Services (QoS) aspects through negotiating, evaluating or monitoring SLAs. However, these traditional SLA actually do not cover eco-efficient green issues or IT ethics issues for sustainability. That is why green SLA (GSLA) should come into play. GSLA is a formal agreement incorporating all the traditional commitments as well as green issues and ethics issues in IT business sectors. GSLA research would survey on different traditional SLA parameters for various services like as network, compute, storage and multimedia in IT business areas. At the same time, this survey could focus on finding the gaps and incorporation of these traditional SLA parameters with green issues for all these mentioned services. This research is mainly points on integration of green parameters in existing SLAs, defining GSLA with new green performance indicators and their measurable units. Finally, a GSLA template could define compiling all the green indicators such as recycling, radio-wave, toxic material usage, obsolescence indication, ICT product life cycles, energy cost etc for sustainable development. Moreover, people’s interaction and IT ethics issues such as security and privacy, user satisfaction, intellectual property right, user reliability, confidentiality etc could also need to add for proposing a new GSLA. However, integration of new and existing performance indicators in the proposed GSLA for sustainable development could be difficult for ICT engineers. Therefore, this research also discovers the management complexity of proposed green SLA through designing a general informational model and analyses of all the relationships, dependencies and effects between various newly identified services under sustainability pillars. However, sustainability could only be achieved through proper implementation of newly proposed GSLA, which largely depends on monitoring the performance of the green indicators. Therefore, this research focuses on monitoring and evaluating phase of GSLA indicators through the interactions with traditional basic SLA indicators, which would help to achieve proper implementation of future GSLA. Finally, this newly proposed GSLA informational model and monitoring aspects could definitely help different service providers/vendors to design their future business strategy in this new transitional sustainable society.

Quality assurance of refuse derived fuel with machine vision

This thesis studies the use of machine vision in RDF quality assurance and manufacturing. Currently machine vision is used in recycling and material detection and some commer- cial products are available in the market. In this thesis an on-line machine vision system is proposed for characterizing particle size. The proposed machine vision system is based on the mapping between image segmenta- tion and the ground truth of the particle size. The results shows that the implementation of such machine vision system is feasible.

Feasibility of industrial implementation of laser cutting into paper making machine

Laser cutting implementation possibilities into paper making machine was studied as the main objective of the work. Laser cutting technology application was considered as a replacement tool for conventional cutting methods used in paper making machines for longitudinal cutting such as edge trimming at different paper making process and tambour roll slitting. Laser cutting of paper was tested in 70’s for the first time. Since then, laser cutting and processing has been applied for paper materials with different level of success in industry. Laser cutting can be employed for longitudinal cutting of paper web in machine direction. The most common conventional cutting methods include water jet cutting and rotating slitting blades applied in paper making machines. Cutting with CO2 laser fulfils basic requirements for cutting quality, applicability to material and cutting speeds in all locations where longitudinal cutting is needed. Literature review provided description of advantages, disadvantages and challenges of laser technology when it was applied for cutting of paper material with particular attention to cutting of moving paper web. Based on studied laser cutting capabilities and problem definition of conventional cutting technologies, preliminary selection of the most promising application area was carried out. Laser cutting (trimming) of paper web edges in wet end was estimated to be the most promising area where it can be implemented. This assumption was made on the basis of rate of web breaks occurrence. It was found that up to 64 % of total number of web breaks occurred in wet end, particularly in location of so called open draws where paper web was transferred unsupported by wire or felt. Distribution of web breaks in machine cross direction revealed that defects of paper web edge was the main reason of tearing initiation and consequent web break. The assumption was made that laser cutting was capable of improvement of laser cut edge tensile strength due to high cutting quality and sealing effect of the edge after laser cutting. Studies of laser ablation of cellulose supported this claim. Linear energy needed for cutting was calculated with regard to paper web properties in intended laser cutting location. Calculated linear cutting energy was verified with series of laser cutting. Practically obtained laser energy needed for cutting deviated from calculated values. This could be explained by difference in heat transfer via radiation in laser cutting and different absorption characteristics of dry and moist paper material. Laser cut samples (both dry and moist (dry matter content about 25-40%)) were tested for strength properties. It was shown that tensile strength and strain break of laser cut samples are similar to corresponding values of non-laser cut samples. Chosen method, however, did not address tensile strength of laser cut edge in particular. Thus, the assumption of improving strength properties with laser cutting was not fully proved. Laser cutting effect on possible pollution of mill broke (recycling of trimmed edge) was carried out. Laser cut samples (both dry and moist) were tested on the content of dirt particles. The tests revealed that accumulation of dust particles on the surface of moist samples can take place. This has to be taken into account to prevent contamination of pulp suspension when trim waste is recycled. Material loss due to evaporation during laser cutting and amount of solid residues after cutting were evaluated. Edge trimming with laser would result in 0.25 kg/h of solid residues and 2.5 kg/h of lost material due to evaporation. Schemes of laser cutting implementation and needed laser equipment were discussed. Generally, laser cutting system would require two laser sources (one laser source for each cutting zone), set of beam transfer and focusing optics and cutting heads. In order to increase reliability of system, it was suggested that each laser source would have double capacity. That would allow to perform cutting employing one laser source working at full capacity for both cutting zones. Laser technology is in required level at the moment and do not require additional development. Moreover, capacity of speed increase is high due to availability high power laser sources what can support the tendency of speed increase of paper making machines. Laser cutting system would require special roll to maintain cutting. The scheme of such roll was proposed as well as roll integration into paper making machine. Laser cutting can be done in location of central roll in press section, before so-called open draw where many web breaks occur, where it has potential to improve runability of a paper making machine. Economic performance of laser cutting was done as comparison of laser cutting system and water jet cutting working in the same conditions. It was revealed that laser cutting would still be about two times more expensive compared to water jet cutting. This is mainly due to high investment cost of laser equipment and poor energy efficiency of CO2 lasers. Another factor is that laser cutting causes material loss due to evaporation whereas water jet cutting almost does not cause material loss. Despite difficulties of laser cutting implementation in paper making machine, its implementation can be beneficial. The crucial role in that is possibility to improve cut edge strength properties and consequently reduce number of web breaks. Capacity of laser cutting to maintain cutting speeds which exceed current speeds of paper making machines what is another argument to consider laser cutting technology in design of new high speed paper making machines.

Sähköajoneuvojen akkujen uusiokäyttö

Tässä kandidaatintyössä tutkittiin sähkö- ja hybridiajoneuvojen akkujen uusiokäyttöä. Tutkimus toteutettiin kirjallisuustyönä. Tavoitteena oli selvittää voidaanko sähkö- ja hybridiajoneuvojen akkuja uusiokäyttää, mitä ongelmia mahdollisesti uusiokäyttöön liittyy, minkälaisissa sovelluksissa käytettyjä akkuja voisi käyttää ja uusiokäytetäänkö kyseisenlaisia akkuja jo nykyään. Työssä esiteltiin myös yleisimpiä akkutekniikoita sekä niiden kierrätystä. Tutkimuksessa havaittiin, että akuissa on runsaasti kapasiteettia jäljellä ajoneuvokäytön jälkeen. Uusiokäytössä akku voi kestää jopa yhtä paljon käyttöä kuin ajoneuvokäytössä. Ongelmat uusiokäytössä liittyvät akkujen vaihtelevaan kuntoon ja kapasiteettiin. Ennen uusiokäyttöä akut tulisi tarkastaa ja jos mahdollista, poistaa huonokuntoiset ja vialliset kennot. Käytettyjen akkujen uusiokäyttöön soveltuvista laitteistoista on tehty muutamia prototyyppejä, jotka ovat teholtaan ja kapasiteetiltaan hyvin vaihtelevia. Sopivalla valvontajärjestelmällä varustettuna käytettyjä akkuja voitaneen käyttää myös olemassa olevissa, akkuja sisältävissä järjestelmissä. Käytettyjä akkuja voitaneen käyttää muun muassa uusiutuvan energian varastointiin, sähköverkon kulutushuippujen kompensointiin ja sähköajoneuvojen pikalatauksen puskurina. Etenkin litiumioniakkujen uusiokäyttö on järkevää, koska kierrätys ei ole kovin tehokasta ainakaan vielä.

Optimal processing chain for waste power plant

This study is done to examine waste power plant’s optimal processing chain and it is important to consider from several points of view on why one option is better than the other. This is to insure that the right decision is made. Incineration of waste has devel-oped to be one decent option for waste disposal. There are several legislation matters and technical options to consider when starting up a waste power plant. From the tech-niques pretreatment, burner and flue gas cleaning are the biggest ones to consider. The treatment of incineration residues is important since it can be very harmful for the envi-ronment. The actual energy production from waste is not highly efficient and there are several harmful compounds emitted. Recycling of waste before incineration is not very typical and there are not many recycling options for materials that cannot be easily re-cycled to same product. Life cycle assessment is a good option for studying the envi-ronmental effect of the system. It has four phases that are part of the iterative study process. In this study the case environment is a waste power plant. The modeling of the plant is done with GaBi 6 software and the scope is from gate-to-grave. There are three different scenarios, from which the first and second are compared to each other to reach conclusions. Zero scenario is part of the study to demonstrate situation without the power plant. The power plant in this study is recycling some materials in scenario one and in scenario two even more materials and utilize the bottom ash more ways than one. The model has the substitutive processes for the materials when they are not recycled in the plant. The global warming potential results show that scenario one is the best option. The variable costs that have been considered tell the same result. The conclusion is that the waste power plant should not recycle more and utilize bottom ash in a number of ways. The area is not ready for that kind of utilization and production from recycled materials.