Participation of kinins in the inhibitory action of captopril on acute hypertension induced by L-NAME in anesthetized rats

The aim of the present study was to investigate the role of bradykinin in the inhibitory action of captopril in hypertension induced by L-NAME in anesthetized rats. Male Wistar rats (260-320 g) were anesthetized with chloralose and arterial blood pressure was recorded with a polygraph pressure transducer. The hypertensive effect of L-NAME was studied in rats pretreated with saline, captopril or HOE 140 plus captopril. The effect of captopril was also studied during the sustained pressor effect of L-NAME. The acute pressor effect of L-NAME (10 mg/kg, iv) was significantly reduced by iv pretreatment with 2 mg/kg captopril (D increase of 49 ± 4.9 mmHg reduced to 20 ± 5.4 mmHg, P = 0.01). The pressor effect of L-NAME (D increase of 38 ± 4.8 mmHg) observed in rats pretreated with captopril and HOE 140 (0.1 mg/kg, iv) was not significantly different from that induced by L-NAME in rats pretreated with saline (P = 0.09). During the sustained pressor effect induced by L-NAME (D increase of 49 ± 4.9 mmHg) captopril induced a significant (P<0.05) reduction in arterial blood pressure (D decrease of 22 ± 3.0 mmHg). The present results demonstrate that the acute pressor effect of L-NAME is reduced by captopril and this inhibitory effect may be partly dependent on the potentiation of the vasodilator actions of bradykinin

Opiatergic participation in the thirst-inhibiting effect of acute third ventricle injections of cadmium (Cd2+) and lead (Pb2+)

We have previously demonstrated that acute third ventricle injections of both lead and cadmium prevent the dipsogenic response elicited by dehydration or by central injections of dipsogenic agents such as angiotensin II, carbachol and isoproterenol in rats. We have also shown that the antidipsogenic action of cadmium may be due, at least in part, to activation of thirst-inhibitory central serotonergic pathways. In the present paper we show that in Wistar male rats the antidipsogenic effect of both lead acetate (3.0 nmol/rat) and cadmium chloride (3.0 nmol/rat) may be partially dependent on the activation of brain opiatergic pathways since central injections of naloxone (82.5 nmol/rat), a non-selective opioid antagonist, blunt the thirst-inhibiting effect of these metals. One hundred and twenty minutes after the second third ventricle injections, dehydrated animals (14 h overnight) receiving saline + sodium acetate displayed a high water intake (7.90 ± 0.47 ml/100 g body weight) whereas animals receiving saline + lead acetate drank 3.24 ± 0.47 ml/100 g body weight. Animals receiving naloxone + lead acetate drank 6.94 ± 0.60 ml/100 g body weight. Animals receiving saline + saline drank 8.16 ± 0.66 ml/100 g body weight whilst animals receiving saline + cadmium chloride drank 1.63 ± 0.37 ml/100 g body weight. Animals receiving naloxone + cadmium chloride drank 8.01 ± 0.94 ml/100 g body weight. It is suggested that acute third ventricle injections of both lead and cadmium exert their antidipsogenic effect by activating thirst-inhibiting opioid pathways in the brain.

The conveyor belt hypothesis for thymocyte migration: participation of adhesion and de-adhesion molecules

Thymocyte differentiation is the process by which bone marrow-derived precursors enter the thymus, proliferate, rearrange the genes and express the corresponding T cell receptors, and undergo positive and/or negative selection, ultimately yielding mature T cells that will represent the so-called T cell repertoire. This process occurs in the context of cell migration, whose cellular and molecular basis is still poorly understood. Kinetic studies favor the idea that these cells leave the organ in an ordered pattern, as if they were moving on a conveyor belt. We have recently proposed that extracellular matrix glycoproteins, such as fibronectin, laminin and type IV collagen, among others, produced by non-lymphoid cells both in the cortex and in the medulla, would constitute a macromolecular arrangement allowing differentiating thymocytes to migrate. Here we discuss the participation of both molecules with adhesive and de-adhesive properties in the intrathymic T cell migration. Functional experiments demonstrated that galectin-3, a soluble ß-galactoside-binding lectin secreted by thymic microenvironmental cells, is a likely candidate for de-adhesion proteins by decreasing thymocyte interaction with the thymic microenvironment.

Role of nitric oxide in hypoxia-induced hyperventilation and hypothermia: participation of the locus coeruleus

Hypoxia elicits hyperventilation and hypothermia, but the mechanisms involved are not well understood. The nitric oxide (NO) pathway is involved in hypoxia-induced hypothermia and hyperventilation, and works as a neuromodulator in the central nervous system, including the locus coeruleus (LC), which is a noradrenergic nucleus in the pons. The LC plays a role in a number of stress-induced responses, but its participation in the control of breathing and thermoregulation is unclear. Thus, in the present study, we tested the hypothesis that LC plays a role in the hypoxia-induced hypothermia and hyperventilation, and that NO is involved in these responses. Electrolytic lesions were performed bilaterally within the LC in awake unrestrained adult male Wistar rats weighing 250-350 g. Body temperature and pulmonary ventilation (VE) were measured. The rats were divided into 3 groups: control (N = 16), sham operated (N = 7) and LC lesioned (N = 19), and each group received a saline or an NG-nitro-L-arginine methyl ester (L-NAME, 250 µg/µl) intracerebroventricular (icv) injection. No significant difference was observed between control and sham-operated rats. Hypoxia (7% inspired O2) caused hyperventilation and hypothermia in both control (from 541.62 ± 35.02 to 1816.18 ± 170.7 and 36.3 ± 0.12 to 34.4 ± 0.09, respectively) and LC-lesioned rats (LCLR) (from 694.65 ± 63.17 to 2670.29 ± 471.33 and 36 ± 0.12 to 35.3 ± 0.12, respectively), but the increase in VE was higher (P<0.05) and hypothermia was reduced (P<0.05) in LCLR. L-NAME caused no significant change in VE or in body temperature under normoxia, but abolished both the hypoxia-induced hyperventilation and hypothermia. Hypoxia-induced hyperventilation was reduced in LCLR treated with L-NAME. L-NAME also abolished the hypoxia-induced hypothermia in LCLR. The present data indicate that hypoxia-induced hyperventilation and hypothermia may be related to the LC, and that NO is involved in these responses.

Participation of nitric oxide in the nucleus isthmi in CO2-drive to breathing in toads

The nucleus isthmi (NI) is a mesencephalic structure of the amphibian brain. It has been reported that NI plays an important role in integration of CO2 chemoreceptor information and glutamate is probably involved in this function. However, very little is known about the mechanisms involved. Recently, it has been shown that nitric oxide synthase (NOS) is expressed in the brain of the frog. Thus the gas nitric oxide (NO) may be involved in different functions in the brain of amphibians and may act as a neurotransmitter or neuromodulator. We tested the hypothesis that NO plays a role in CO2-drive to breathing, specifically in the NI comparing pulmonary ventilation, breathing frequency and tidal volume, after microinjecting 100 nmol/0.5 µl of L-NAME (a nonselective NO synthase inhibitor) into the NI of toads (Bufo paracnemis) exposed to normocapnia and hypercapnia. Control animals received microinjections of vehicle of the same volume. Under normocapnia no significant changes were observed between control and L-NAME-treated toads. Hypercapnia caused a significant (P<0.01) increase in ventilation only after intracerebral microinjection of L-NAME. Exposure to hypercapnia caused a significant increase in breathing frequency both in control and L-NAME-treated toads (P<0.01 for the control group and P<0.001 for the L-NAME group). The tidal volume of the L-NAME group tended to be higher than in the control group under hypercapnia, but the increase was not statistically significant. The data indicate that NO in the NI has an inhibitory effect only when the respiratory drive is high (hypercapnia), probably acting on tidal volume. The observations reported in the present investigation, together with other studies on the presence of NOS in amphibians, indicate a considerable degree of phylogenetic conservation of the NO pathway amongst vertebrates.

Combined effects of diethylpropion and alcohol on locomotor activity of mice: participation of the dopaminergic and opioid systems

The widespread consumption of anorectics and combined anorectic + alcohol misuse are problems in Brazil. In order to better understand the interactive effects of ethanol (EtOH) and diethylpropion (DEP) we examined the locomotion-activating effects of these drugs given alone or in combination in mice. We also determined whether this response was affected by dopamine (DA) or opioid receptor antagonists. A total of 160 male Swiss mice weighing approximately 30 g were divided into groups of 8 animals per group. The animals were treated daily for 7 consecutive days with combined EtOH + DEP (1.2 g/kg and 5.0 mg/kg, ip), EtOH (1.2 g/kg, ip), DEP (5.0 mg/kg, ip) or the control solution coadministered with the DA antagonist haloperidol (HAL, 0.075 mg/kg, ip), the opioid antagonist naloxone (NAL, 1.0 mg/kg, ip), or vehicle. On days 1, 7 and 10 after the injections, mice were assessed in activity cages at different times (15, 30, 45 and 60 min) for 5 min. The acute combination of EtOH plus DEP induced a significantly higher increase in locomotor activity (day 1: 369.5 ± 34.41) when compared to either drug alone (day 1: EtOH = 232.5 ± 23.79 and DEP = 276.0 ± 12.85) and to control solution (day 1: 153.12 ± 7.64). However, the repeated administration of EtOH (day 7: 314.63 ± 26.79 and day 10: 257.62 ± 29.91) or DEP (day 7: 309.5 ± 31.65 and day 10: 321.12 ± 39.24) alone or in combination (day 7: 459.75 ± 41.28 and day 10: 427.87 ± 33.0) failed to induce a progressive increase in the locomotor response. These data demonstrate greater locomotion-activating effects of the EtOH + DEP combination, probably involving DA and/or opioid receptor stimulation, since the daily pretreatment with HAL (day 1: EtOH + DEP = 395.62 ± 11.92 and EtOH + DEP + HAL = 371.5 ± 6.76; day 7: EtOH + DEP = 502.5 ± 42.27 and EtOH + DEP + HAL = 281.12 ± 16.08; day 10: EtOH + DEP = 445.75 ± 16.64 and EtOH + DEP + HAL = 376.75 ± 16.4) and NAL (day 1: EtOH + DEP = 553.62 ± 38.15 and EtOH + DEP + NAL = 445.12 ± 55.67; day 7: EtOH + DEP = 617.5 ± 38.89 and EtOH + DEP + NAL = 418.25 ± 61.18; day 10: EtOH + DEP = 541.37 ± 32.86 and EtOH + DEP + NAL = 427.12 ± 51.6) reduced the locomotor response induced by combined administration of EtOH + DEP. These findings also suggest that a major determinant of combined anorectic-alcohol misuse may be the increased stimulating effects produced by the combination.

Production planning and optimization of a pulp mill: introduction of the optimisation based scheduling software for pulp industry

The objective of this project was to introduce a new software product to pulp industry, a new market for case company. An optimization based scheduling tool has been developed to allow pulp operations to better control their production processes and improve both production efficiency and stability. Both the work here and earlier research indicates that there is a potential for savings around 1-5%. All the supporting data is available today coming from distributed control systems, data historians and other existing sources. The pulp mill model together with the scheduler, allows what-if analyses of the impacts and timely feasibility of various external actions such as planned maintenance of any particular mill operation. The visibility gained from the model proves also to be a real benefit. The aim is to satisfy demand and gain extra profit, while achieving the required customer service level. Research effort has been put both in understanding the minimum features needed to satisfy the scheduling requirements in the industry and the overall existence of the market. A qualitative study was constructed to both identify competitive situation and the requirements vs. gaps on the market. It becomes clear that there is no such system on the marketplace today and also that there is room to improve target market overall process efficiency through such planning tool. This thesis also provides better overall understanding of the different processes in this particular industry for the case company.

Learning information technology business in a changing industry landscape. Introducing Team Entrepreneurship in Renewing Bachelor Education in Renewing Bachelor Education in Information

Speed, uncertainty and complexity are increasing in the business world all the time. When knowledge and skills become quickly irrelevant, new challenges are set for information technology (IT) education. Meta-learning skills – learning how to learn rapidly - and innovation skills have become more essential than single technologies or other specific issues. The drastic changes in the information and communications technology (ICT) sector have caused a need to reconsider how IT Bachelor education in Universities of Applied Sciences should be organized and employed to cope with the change. The objective of the study was to evaluate how a new approach to IT Bachelor education, the ICT entrepreneurship study path (ICT-ESP) fits IT Bachelor education in a Finnish University of Applied Sciences. This kind of educational arrangement has not been employed elsewhere in the context of IT Bachelor education. The study presents the results of a four-year period during which IT Bachelor education was renewed in a Finnish University of Applied Sciences. The learning environment was organized into an ICT-ESP based on Nonaka’s knowledge theory and Kolb’s experiental learning. The IT students who studied in the ICT-ESP established a cooperative and learned ICT by running their cooperative at the University of Applied Sciences. The students (called team entrepreneurs) studied by reading theory in books and other sources of explicit information, doing projects for their customers, and reflecting in training sessions on what was learnt by doing and by studying the literature. Action research was used as the research strategy in this study. Empirical data was collected via theme-based interviews, direct observation, and participative observation. Grounded theory method was utilized in the data analysis and the theoretical sampling was used to guide the data collection. The context of the University of Applied Sciences provided a good basis for fostering team entrepreneurship. However, the results showed that the employment of the ICT-ESP did not fit into the IT Bachelor education well enough. The ICT-ESP was cognitively too tough for the team entrepreneurs because they had two different set of rules to follow in their studies. The conventional courses engaged lot of energy which should have been spent for professional development in the ICT-ESP. The amount of competencies needed in the ICT-ESP for professional development was greater than those needed for any other ways of studying. The team entrepreneurs needed to develop skills in ICT, leadership and self-leadership, team development and entrepreneurship skills. The entrepreneurship skills included skills on marketing and sales, brand development, productization, and business administration. Considering the three-year time the team entrepreneurs spent in the ICT-ESP, the challenges were remarkable. Changes to the organization of IT Bachelor education are also suggested in the study. At first, it should be admitted that the ICT-ESP produces IT Bachelors with a different set of competencies compared to the conventional way of educating IT Bachelors. Secondly, the number of courses on general topics in mathematics, physics, and languages for team entrepreneurs studying in the ICTESP should be reconsidered and the conventional course-based teaching of the topics should be reorganized to support the team coaching process of the team entrepreneurs with their practiceoriented projects. Third, the upcoming team entrepreneurs should be equipped with relevant information about the ICT-ESP and what it would require in practice to study as a team entrepreneur. Finally, the upcoming team entrepreneurs should be carefully selected before they start in the ICT-ESP to have a possibility to eliminate solo players and those who have a too romantic view of being a team entrepreneur. The results gained in the study provided answers to the original research questions and the objectives of the study were met. Even though the IT degree programme was terminated during the research process, the amount of qualitative data gathered made it possible to justify the interpretations done.

Controlling and Assessment Indirect Spend – Case Study from Beverage Industry

Over the past decades, companies’ interest in controlling indirect sourcing process has increased. New indirect procurement strategies developed for the companies are needed in order to manage their indirect costs. New cost management strategies allow companies to improve their core competences. The research methodology and used in this thesis is qualitative. The theory is based on scientific publications. Empirical data given by the case organization, and was collected in the company’s own systems and in project steering meetings. The purpose of the study was to select a new electronic system for the company and give options for the company to reduce case organization’s indirect costs. The result showed that the most effective indirect cost management strategy was adopting a new electronic procurement system.

Entry Modes for Finnish Firms into the Zambian Renewable Energy Industry

The renewable energy industry in Zambia is poised for growth and offers many possibilities for Finnish firms willing to enter the market. The Zambian government’s deliberate policy measures aim at attracting foreign direct investment (FDI) into this sector. This study rationalises that this could be the pull factor for Finnish firms. The thesis gives an overview of the industry and investigates an appropriate mode of entry, basing its arguments on the comparison analysis of the two economies with the use of the world forum’s stages of economic development as a framework. The theoretical part of the study examines internationalisation theories, entry mode choice and factors influencing the choice. The multiple case study approach is implored, analysing four case companies from Finland with the use of extant literature on internationalisation relevant to the study. The research design involves the use of documentation, secondary data, interviews and observation. The results of the case analyses show that the Finnish firm’s most preferred entry mode initially is exporting because it is considered to be less risky. Additionally, the findings also reveal that the selection of a suitable mode of entry is dependent on the firms’ size, orientation and international experience and could therefore be considered to be subjective. Paramount is the act of gaining market knowledge. The study shows that only hydro-electrical, solar energies and biomass are by far the most used and known forms of renewable energy in Zambia, while other alternative sources still remain un-exploited thus highlighting a growth potential. However, policy formulation and the regulatory framework in the renewable energy sector were found to be wanting.

Conditions and practices in the commercialisation of innovations in wood industry

The report 'Conditions and practices in the commercialisation of innovation in wood industry' has been written as a part of the Wood Academy project. The report analyses the commercialisation conditions and practices of wood industry by utilising product categorisation based on a conceptual schema which combines the aspects of the transfer of the procession of utility and the degree of form/service utility (or value-added) created or provided by the company. Open innovation approaches help to perceive the possible new product and service innovations as well as the new business models and earning logics in the industry. The report also contains brief company cases to demonstrate theory-to-practice and showcase company examples from successful Finnish companies.

The Possibility of Greenhouse Gas Mitigation in Ethiopian Cement Industry

Cement industry significantly associated with high greenhouse gas (GHG) emissions. Considering the environmental impact, particularly global warming potential, it is important to reduce these emissions to air. The aim of the study is to investigate the mitigation possibility of GHG emissions in Ethiopian cement industry. Life cycle assessment (LCA) method used to identify and quantify GHG emissions during one ton of ordinary portland cement (OPC) production. Three mitigation scenarios: alternative fuel use, clinker substitution and thermal energy efficiency were applied on a representative gate-to-gate flow model developed with GaBi 6 software. The results of the study indicate that clinker substitution and alternative fuel use play a great role for GHG emissions mitigation with affordable cost. Applying most energy efficient kiln technology, which in turn reduces the amount of thermal energy use, has the least GHG emissions reduction intensity and high implementation cost comparing to the other scenarios. It was found that the cumulative GHG emissions mitigation potential along with other selected mitigation scenarios can be at least 48.9% per ton of cement production.

A Phase Model for Building a Customer Value Based Sales Tool – Case Mining and Metals Industry

The objective of this research is to observe the state of customer value management in Outotec Oyj, determine the key development areas and develop a phase model with which to guide the development of a customer value based sales tool. The study was conducted with a constructive research approach with the focus of identifying a problem and developing a solution for the problem. As a basis for the study, the current literature involving customer value assessment and solution and customer value selling was studied. The data was collected by conducting 16 interviews in two rounds within the company and it was analyzed by coding openly. First, seven important development areas were identified, out of which the most critical were “Customer value mindset inside the company” and “Coordination of customer value management activities”. Utilizing these seven areas three functionality requirements, “Preparation”, “Outotec’s value creation and communication” and “Documentation” and three development requirements for a customer value sales tool were identified. The study concluded with the formulation of a phase model for building a customer value based sales tool. The model included five steps that were defined as 1) Enable customer value utilization, 2) Connect with the customer, 3) Create customer value, 4) Define tool to facilitate value selling and 5) Develop sales tool. Further practical activities were also recommended as a guide for executing the phase model.

Consumer online communication of corporate social responsibility in the sin industry context: Cases in the global online gambling industry.

So-called sin industries are often related to harmfulness, unethical business, and unproductiveness. Nowadays, the alcohol, gambling, and tobacco industries are most often considered to be part of sin industries, which is also the context of this study. However, the definition of a sin industry is always related to time and culture. Despite the controversies of sin industries, there are studies that have shown that corporate social responsibility (CSR) engagement is even more important for sin industries than for normal industries and that CSR has a positive effect on firm value in sin industries. With CSR this study refers to an ideology where company takes mostly voluntary actions towards various groups of stakeholders and the environment. In other words, the company goes beyond the legal norms and regulations. In particular, the purpose of this thesis is to find out how companies, operating in the online gambling industry, communicate about their CSR actions to consumers at their web pages. The online environment is essential for this study as online gambling environment is a source of many controversies in comparison to the traditional gambling halls and casinos. These include, for example, greater accessibility, anonymity, and availability of the service. This study uses qualitative textual analysis as its approach, more precisely the discourse analysis. In addition, as this study focuses on large international companies and their actions, also case study approach will be presented. The cases studied are Mybet, Unibet, and Bwin.Party. In order to study the subject, elements from discourse analysis are combined with insights of essential CSR theories, and the specific characteristics of the online gambling industry. As a background for the framework, this study uses the framework of Du & Vieira (2012). After analyzing the discourses of CSR communication and CSR practices, it seems that all of the case companies still do not use all the potential that the online environment provides in terms of CSR or stakeholder communication. There are large differences between different communication tools used at different web pages (gambling pages vs. corporation pages) and between the firms’ CSR profiles. Moreover, there are large differences in the CSR practices used in the web pages of the case companies. The findings of this study are partially alarming as the case companies represent the largest companies in the industry. There are major varieties between the companies’ CSR communication and clear shortcomings in some parts of the online communication. Moreover, the trust of the consumer was broken in some places. If this is the standard that the biggest players in the industry have set with regards to CSR communication, it is probable that the smaller players are performing even worse. Moreover, the regulators are most likely concentrating on the larger companies, so the smaller companies might have fewer incentives and pressure to perform according to the regulations or exceeding the legislation. The conclusions of this thesis provide insights to managers, regulators, and scholars. Suggestions for future studies are provided as well.

The demand-supply balancing process in supply chain management - case mining & metals industry equipment

The aim of this thesis is to search how to match the demand and supply effectively in industrial and project-oriented business environment. The demand-supply balancing process is searched through three different phases: the demand planning and forecasting, synchronization of demand and supply and measurement of the results. The thesis contains a single case study that has been implemented in a company called Outotec. In the case study the demand is planned and forecasted with qualitative (judgmental) forecasting method. The quantitative forecasting methods are searched further to support the demand forecast and long term planning. The sales and operations planning process is used in the synchronization of the demand and supply. The demand forecast is applied in the management of a supply chain of critical unit of elemental analyzer. Different meters on operational and strategic level are proposed for the measurement of performance.