Determinação de parâmetros cinéticos em fluxo com câmara de gradiente e deteção espectrofotométrica: aplicação à reação entre o violeta de cristal e o ião hidróxido

A didactic experiment is proposed aimed to extend the Flow Injection Analysis (FIA) based methodology to the area of physical chemistry/chemical reactors for undergraduate labs. Our prime objective was to describe the use of a gradient chamber for determination of the rate constant for the reaction between crystal violet and the hydroxide ion. The study was complemented by determining the effect of temperature on the rate constant. The kinetic parameters, activation energy and reaction rate constant are determined based on an assumption of rate orders. The main didactic advantages of the proposed experimental set-up are the use of less reagents, contributing to a more environmental friendly experiment. The experiment illustrates also the reduction of associated errors and time by using automated analysis owing to decreased operator manipulation.

Síntesis química, estudios de caracterización y reactividad de un material catalítico a base de ZrO2-H3PW12O40

In this work, the preparation and characterization of materials such as zirconium oxide (ZrO2) and phosphotungstic acid promoted zirconium oxide (ZrO2-H3PW12O40) is presented. Physico-chemical characterization results showed that addition of H3PW12O40 acted as both a textural and chemical promoter of zirconium oxide. The incorporation of phosphotungstic acid into the ZrO2 matrix delayed the sintering of the material and stabilized ZrO2 in the tetragonal phase. ZrO2 acidity was also enhanced, developing strong acid sites on its surface. The Pt/ZrO2-H3PW12O40 catalyst was active for n-pentane isomerization at 250 °C, exhibiting high selectivity to iso-pentane (95%). This result is probably due to its suitable acidity.

Uso de hardware de código fonte aberto "Arduino" para acionamento de dispositivo solenoide em sistemas de análises em fluxo

This paper describes the use of the open source hardware platform, denominated "Arduino", for controlling solenoid valves for solutions handling in flow analysis systems. System assessment was carried out by spectrophotometric determination of iron (II) in natural water. The sampling rate was estimated as 45 determinations per hour and the coefficient of variation was lower than 3%. Per determination, 208 µg of 1-10-phenanthroline and ascorbic acid were consumed, generating 1.3 mL of waste. "Arduino" proved a reliable microcontroller with low cost and simple interfacing, allowing USB communication for solenoid device switching in flow systems.

Determinação de nimesulida por análise por injeção em fluxo com detecção amperométrica de múltiplos pulsos

A simple and fast method for the determination of nimesulide (NI) using flow injection analysis with multiple-pulse amperometric (FIA-MPA) detection at a boron-doped diamond (BDD) electrode was developed. The method was based mainly on the application of a four-potential waveform, E1(det) = -0.8 V / 30 ms, E2(det) = 0.6 V / 30 ms, E3(det) = -0.4 V / 30 ms and E4(cleaning) = -0.45 V / 300 ms versus Ag/AgCl (3.0 mol L-1 KCl). NI was detected at three different electrode potentials, at which the nitro group undergoes different redox reactions. The proposed method was selective and sensitive (detection limit of 81.0 nmol L-1), and successfully applied for the determination of NI in pharmaceutical formulations, yielding similar results to those obtained by the reference method.

Síntese do material mesoporoso MCM-41 usando esponja de água-doce como fonte de sílica

Fresh water sponge was used as a silica source for the synthesis of MCM-41 via the hydrothermal process. The silica was extracted from the sponge by washing with nitric acid and piranha solution. Synthesis of MCM-41 was performed at 100 °C for 5 days and the procedure was optimized, with modifications made to the leaching temperature of the silica and the synthesis of mesoporous material, which was characterized by XRD, FT-IR, SEM and adsorption of N2. The optimal result was achieved at a temperature of 135 °C for 3 days, showing ordered mesoporous material with a surface area of 1080 m² g-1.

Bateria de métricas para avaliação da verdura material de reações de síntese

The use of a battery of three mass metrics (atomic economy - AE, reaction mass efficiency - RME, and mass intensity - MI) for systemic evaluation of the material greenness of synthesis reactions is presented. Material greenness is discussed in terms of materialization/dematerialization of the reaction system and also according to the first two Principles of Green Chemistry, and is shown to involve two components: atomic greenness (incorporation of the atoms provided by reagents into the product, evaluated by AE and RME); and massic greenness (global mass of reagents and non-stoichiometric materials, evaluated by MI, related to the production of residues).

Theoretical investigations of the bulk modulus in the tetra-cubic transition of PbTiO3 material

Resulting from ion displacement in a solid under pressure, piezoelectricity is an electrical polarization that can be observed in perovskite-type electronic ceramics, such as PbTiO3, which present cubic and tetragonal symmetries at different pressures. The transition between these crystalline phases is determined theoretically through the bulk modulus from the relationship between material energy and volume. However, the change in the material molecular structure is responsible for the piezoelectric effect. In this study, density functional theory calculations using the Becke 3-Parameter-Lee-Yang-Parr hybrid functional were employed to investigate the structure and properties associated with the transition state of the tetragonal-cubic phase change in PbTiO3 material.

Dissulfeto de molibdênio, um material multifuncional e surpreendente: doze anos depois

In 2002, a review article was published in which molybdenum disulfide properties were discussed. The last sentence of the article read as follows: "Based on that described above, we can conclude that in spite of the vast applications of molybdenum disulfide in several industrial branches, many of the potential applications need to be investigated in the future". Since 2002, novel properties of molybdenum disulfide have been described which promise to revolutionize science. The objective of the present review paper was to provide an overview of the processes of 2H-MoS2 exfoliation and properties of the single layers, reported mainly in the last decade.

Potentiometric determination of Nickel (II) ion using 2-hydroxy-1-naphthylidene-N-cyanoacetohydrazone as electroactive material

A potentiometric Nickel sensor was prepared using 2-hydroxy-1-naphthylidene-N-cyanoacetohydrazone as electro-active material and epoxy resin as a binding material. A membrane composed of 40% Schiff's base and 60% epoxy resin exhibited the best performance. The membrane showed excellent response in the concentration range of 0.15 ppm to 0.1 mol L- 1 Ni+2 ions with non-Nernstian slope of 22.0 mV/decade, had a rapid response time (less than 10 s), and can be used for three months without any considerable loss of potential. The sensor was useful within the pH range of 1.3 to 9.6, and was able to discriminate between Ni2+ and a large number of alkaline earth and transition metal ions. The practical utility of the sensor has been demonstrated by using it successfully as an indicator electrode in the potentiometric titration of Ni2+ with EDTA and oxalic acid.

Desenvolvimento de um sistema de análise por injeção em fluxo utilizando materiais alternativos de baixo custo para fins didáticos

This work describes a simple and inexpensive flow injection analysis system in which gravity force provides fluid propulsion while needles for insulin administration or metallic wires act as electrodes for amperometric detection. The proposed system was able to demonstrate the influence of several operational parameters on the transient signals. Moreover, this system was successfully used to evaluate both the stoichiometry of Cu2+-EDTA complex and the effect of pH on the kinetics of the reaction between ferricyanide and ascorbic acid. Therefore, the proposed system can be regarded as an efficient and accessible didactic tool for the teaching of FIA principles.

DISPOSITIVO PARA EXTRAÇÃO LÍQUIDO-LÍQUIDO EM SISTEMAS DE ANÁLISES EM FLUXO

AbstractA device comprising a lab-made chamber with mechanical stirring and computer-controlled solenoid valves is proposed for the mechanization of liquid-liquid extractions. The performance was demonstrated by the extraction of ethanol from biodiesel as a model of the extraction of analytes from organic immiscible samples to an aqueous medium. The volumes of the sample and extractant were precisely defined by the flow-rates and switching times of the valves, while the mechanic stirring increased interaction between the phases. Stirring was stopped for phase separation, and a precise time-control also allowed a successful phase separation (i.e., the absence of the organic phase in the aqueous extract). In the model system, a linear response between the analytical response and the number of extractions was observed, indicating the potential for analyte preconcentration in the extract. The efficiency and reproducibility of the extractions were demonstrated by recoveries of ethanol spiked to biodiesel samples within 96% and 100% with coefficients of variation lower than 3.0%.

OBTENÇÃO E CARACTERIZAÇÃO DE MATERIAL HÍBRIDO ENTRE SÍLICA E CICLODEXTRINAS

The obtention of silica and cyclodextrin hybrid materials was accomplished by refluxing them in xylol using citric acid as a binding agent. The materials were characterized by infrared spectroscopy, X-ray diffraction, thermogravimetric analysis, scanning electron microscopy, and elemental analysis. Evidence for the docking of cyclodextrins α and γ was substantiated based on the variation in band intensity for groups such as ≡Si-OH. Additional docking evidence includes the displacement of some of the bands that are related to cyclodextrin such as the deformation of the C-H axial bond. The α and γ-CDSi materials were characterized as amorphous compounds. The products obtained in the synthesis showed changes in the decomposition temperatures of their isolated constituents, in which the mass of α and γ-CD docked to the silica surface gave the estimated values of 41% and 47%, respectively. The elemental constituents were shown to be consistent and close to their relative theoretical values. ​Thermogravimetric analysis showed that a reduction in the percentage of the hybrids was proportional to the amount of lost mass. This new material is an improvement over synthesized organosilane materials because the operator and the environment benefit from a less toxic methodology. In addition, the material has several potential applications in complexation systems with cyclodextrin.

Especificidade de anti-soro policlonal à Leifsonia xyli subsp. xyli

Detectar a presença da bactéria Leifsonia xyli subsp. xyli em material de propagação da cana-de-açúcar (Saccharum sp.) é importante para direcionar o controle do raquitismo-da-soqueira. Neste trabalho, objetivou-se produzir anticorpo policlonal específico contra Leifsonia xyli subsp. xyli (Lxx), visando utilizá-lo em método sorológico para detecção do patógeno. Para isso, o antígeno foi preparado a partir de células intactas, após lavagem por centrifugação de cultura-pura em tampão fosfato salino 0,01 M (PBS) e diálise em glutaraldeido 2% em PBS. O plano de imunização em coelho consistiu de duas injeções intramusculares da mistura 1:1 do antígeno com adjuvante Freund (completo e incompleto, a intervalos de 21 dias) e duas injeções subcutâneas do antígeno puro, a intervalos de dez dias. O anti-soro foi testado pelo método de Dot Blot com revelação por peroxidase para se determinar: (i) título do anticorpo e (ii) reação contra Lxx, Xanthomonas axonopodis pv. vesicatoria e bactérias endofíticas de cana-de-açúcar (Azospirillum brasilense, A. lipoferum, Herbaspirillum rubrisubalbicans, H. seropedicae e Gluconacetobacter diazotrophicus). A maior diluição analisada do anti-soro 1:20.000 mostrou reação fortemente positiva e específica contra Lxx e ausência de reação contra as demais bactérias. A purificação da fração IgG (Imunoglobulina G) não resultou em melhoria na reatividade e especificidade do anti-soro. Estimou-se o nível de detecção do método a partir de suspensão bacteriana em 2x10(6) células/ml.

Potencialidades analíticas do dietilditiofosfato de amônio em espectrometria de massas com plasma indutivamente acoplado empregando extração em fase sólida e sistemas de injeção em fluxo

Um sistema de injeção em fluxo envolvendo complexação com dietilditiofosfato de amônio e sorção de complexos metálicos em minicolunas de sílica gel modificada por grupos octadecil C18 é proposto para determinações multielementares em espectrometria de massa com plasma indutivamente acoplado. Influência da concentração de reagentes, natureza do ácido, tempo de reação, tempos de comutação, vazões e interferência de sódio foram investigadas. Água ou solução 2% v/v HNO3 podem ser utilizadas para lavar a coluna antes da eluição dos analitos com etanol. Amostras contendo 5000 mg Na L-1 e analisadas diretamente com o sistema proposto produzem uma concentração aparente de 63Cu de 0,45 µg L-1; por outro lado não foi observada interferência para As, Pb, Bi, Se, In, Tl, Cd, Hg e 65Cu. Para 0,25 % w/v NH4DTP e 3 mL de solução de amostra, curvas analíticas para Bi, Cu, Pb, As, Se, In, Tl, Cd, Hg no intervalo de 0,10 a 2,00 µg L-1 podem ser construídas com boas correlações (r2 > 0.998). A velocidade analítica e sensibilidade podem ser melhoradas pois dependem das condições de pré-concentração e eluição selecionadas. Com os parâmetros acima fixados, limites de detecção de 0.014 (Cu), 0.027 (As), 0.06 (Se), 0.02 (Cd), 0.029 (In), 0.043 (Hg), 0.02 (Tl), 0.06 (Pb) e 0.002 µg L-1 (Bi) foram obtidos.

Determinação espectrofotométrica por injeção em fluxo de compostos fenólicos em águas residuárias empregando peroxidase de abobrinha (Cucurbita pepo)

Empregou-se nesse trabalho alguns vegetais como fonte de peroxidase. Após a determinação de proteína total, atividade e atividade específica, selecionou-se o extrato bruto da abobrinha (Cucurbita pepo) como fonte dessa enzima para ser empregado em um sistema de análise por injeção em fluxo com detecção espectrofotométrica para a determinação de diversos compostos fenólicos (e.g. fenol, catecol, 2,4-diclorofenol, 4-cloro-3-metilfenol, 4-acetamidofenol, 4-clorofenol, 2,4,6-triclorofenol, o-cresol, m-cresol, p-cresol e hidroquinona). Após a otimização desse sistema em fluxo, o mesmo foi empregado na determinação de compostos fenólicos em águas residuárias de indústrias da região de São Carlos-SP, no intervalo de concentração de 2,0x10-4 a 4,0x10-3 mol L-1, com LD de 8,0x10-5 mol L-1 e freqüência analítica de 58 h-1. A recuperação de fenol em 3 amostras variou de 98,3 a 106, 2% e o RSD foi menor que 1,2% para soluções de fenol nas concentrações de 6,0x10-4 e 8,0x10-4 mol l-1 (n=10).