Does timing and sequencing of transitions to adulthood make a difference? Stress, smoking, and physical activity among young Australian women

The major changes of the transition to adulthood are argued to be stressful, and health-related behaviors such as smoking and physical activity may be adopted, consolidated, or abandoned at this time. On the other hand, research has suggested that the normative transitions of emerging adulthood, although involving considerable change, may be associated with low stress because they are perceived as both positive and normal at this life stage. This article examines relations between the timing and sequencing of life transitions and stress and health-related behaviors, focusing on the transition to young adulthood among Australian women. A total of 853 women aged 22 to 27 provided information about the timing and sequencing of 6 life transitions: moving out of home, stopping full-time education, starting full-time work, having the first live-in relationship, marriage, and motherhood-and stress, smoking, and physical activity. Most had moved out of home, stopped full-time education, and started full-time work, but only 14% had undertaken all 6 transitions. Overall, 70% of participants had made transitions in order Overall, the findings suggest that the relations between timing and sequencing of transitions, and indicators of health, are moderate for smoking, but small for stress and for physical activity. These effects remained after controlling for socioeconomic status of the participants' families of origin. Matching current social norms for the timing and sequencing of life changes may be of less importance for women's well-being than is commonly believed. Although the significant relations between early or out of order transitions and smoking are of concern, the smaller relations with stress and with sedentariness suggest that such transitions may have limited negative consequences, and support the view that individuals are active in choosing the life path that is appropriate for them and their circumstances.

Dynamic response: Real-time adaptation for music emotion

Music plays an enormous role in today's computer games; it serves to elicit emotion, generate interest and convey important information. Traditional gaming music is fixed at the event level, where tracks loop until a state change is triggered. This behaviour however does not reflect musically the in-game state between these events. We propose a dynamic music environment, where music tracks adjust in real-time to the emotion of the in-game state. We are looking to improve the affective response to symbolic music through the modification of structural and performative characteristics through the application of rule-based techniques. In this paper we undertake a multidiscipline approach, and present a series of primary music-emotion structural rules for implementation. The validity of these rules was tested in small study involving eleven participants, each listening to six permutations from two musical works. Preliminary results indicate that the environment was generally successful in influencing the emotion of the musical works for three of the intended four directions (happier, sadder & content/dreamier). Our secondary aim of establishing that the use of music-emotion rules, sourced predominantly from Western classical music, could be applied with comparable results to modern computer gaming music was also largely successfully.

Dynamic simulation of chemical plant

A CSSL- type modular FORTRAN package, called ACES, has been developed to assist in the simulation of the dynamic behaviour of chemical plant. ACES can be harnessed, for instance, to simulate the transients in startups or after a throughput change. ACES has benefited from two existing simulators. The structure was adapted from ICL SLAM and most plant models originate in DYFLO. The latter employs sequential modularisation which is not always applicable to chemical engineering problems. A novel device of twice- round execution enables ACES to achieve general simultaneous modularisation. During the FIRST ROUND, STATE-VARIABLES are retrieved from the integrator and local calculations performed. During the SECOND ROUND, fresh derivatives are estimated and stored for simultaneous integration. ACES further includes a version of DIFSUB, a variable-step integrator capable of handling stiff differential systems. ACES is highly formalised . It does not use pseudo steady- state approximations and excludes inconsistent and arbitrary features of DYFLO. Built- in debug traps make ACES robust. ACES shows generality, flexibility, versatility and portability, and is very convenient to use. It undertakes substantial housekeeping behind the scenes and thus minimises the detailed involvement of the user. ACES provides a working set of defaults for simulation to proceed as far as possible. Built- in interfaces allow for reactions and user supplied algorithms to be incorporated . New plant models can be easily appended. Boundary- value problems and optimisation may be tackled using the RERUN feature. ACES is file oriented; a STATE can be saved in a readable form and reactivated later. Thus piecewise simulation is possible. ACES has been illustrated and verified to a large extent using some literature-based examples. Actual plant tests are desirable however to complete the verification of the library. Interaction and graphics are recommended for future work.

Measurement of productivity index with dynamic DEA

Fare, Grosskopf, Norris and Zhang developed a non-parametric productivity index, Malmquist index, using data envelopment analysis (DEA). The Malmquist index is a measure of productivity progress (regress) and it can be decomposed to different components such as 'efficiency catch-up' and 'technology change'. However, Malmquist index and its components are based on two period of time which can capture only a part of the impact of investment in long-lived assets. The effects of lags in the investment process on the capital stock have been ignored in the current model of Malmquist index. This paper extends the recent dynamic DEA model introduced by Emrouznejad and Thanassoulis and Emrouznejad for dynamic Malmquist index. This paper shows that the dynamic productivity results for Organisation for Economic Cooperation and Development countries should reflect reality better than those based on conventional model.

The Sarkozy effect: France’s new presidential dynamic

The election on 6 May 2007 of Nicolas Sarkozy as President of the Republic ushered in the promise of a new era in France. Sarkozy’s presidency follows those of the Socialist François Mitterrand (1981-95) and the neo-Gaullist Jacques Chirac (1995-2007), who together occupied France’s highest political office for more than a quarter-century. From the outset, Sarkozy’s presidential campaign was predicated on the need for change in France, for a “rupture” with the past; and his emphatic victory against the Socialist Ségolène Royal gave him a mandate to effect this. The legislative elections of June 2007, by assuring a strong majority in the National Assembly for Sarkozy’s centre-right Union pour un Mouvement Populaire (UMP), left the way clear for implementing the new President’s reform agenda over the next five years. This article examines the political context within which Sarkozy was elected to power, the main proposals of his presidential program, the challenges he faces, and his prospects for bringing real change to France.

An investigation of the dynamic characteristics of a bolted-rotor system

A Jeffcott rotor consists of a disc at the centre of an axle supported at its end by bearings. A bolted Jeffcott rotor is formed by two discs, each with a shaft on one side. The discs are held together by spring loaded bolts near the outer edge. When the rotor turns there is tendency for the discs to separate on one side. This effect is more marked if the rotor is unbalanced, especially at resonance speeds. The equations of motion of the system have been developed with four degrees of freedom to include the rotor and bearing movements in the respective axes. These equations which include non-linear terms caused by the rotor opening, are subjected to external force such from rotor imbalance. A simulation model based on these equations was created using SIMULINK. An experimental test rig was used to characterise the dynamic features. Rotor discs open at a lateral displacement of the rotor of 0.8 mm. This is the threshold value used to show the change of stiffness from high stiffness to low stiffness. The experimental results, which measure the vibration amplitude of the rotor, show the dynamic behaviour of the bolted rotor due to imbalance. Close agreement of the experimental and theoretical results from time histories, waterfall plots, pseudo-phase plots and rotor orbit plot, indicated the validity of the model and existence of the non-linear jump phenomenon.

Management information:design of a system for change identification

This thesis deals with the problem of Information Systems design for Corporate Management. It shows that the results of applying current approaches to Management Information Systems and Corporate Modelling fully justify a fresh look to the problem. The thesis develops an approach to design based on Cybernetic principles and theories. It looks at Management as an informational process and discusses the relevance of regulation theory to its practice. The work proceeds around the concept of change and its effects on the organization's stability and survival. The idea of looking at organizations as viable systems is discussed and a design to enhance survival capacity is developed. It takes Ashby's theory of adaptation and developments on ultra-stability as a theoretical framework and considering conditions for learning and foresight deduces that a design should include three basic components: A dynamic model of the organization- environment relationships; a method to spot significant changes in the value of the essential variables and in a certain set of parameters; and a Controller able to conceive and change the other two elements and to make choices among alternative policies. Further considerations of the conditions for rapid adaptation in organisms composed of many parts, and the law of Requisite Variety determine that successful adaptive behaviour requires certain functional organization. Beer's model of viable organizations is put in relation to Ashby's theory of adaptation and regulation. The use of the Ultra-stable system as abstract unit of analysis permits developing a rigorous taxonomy of change; it starts distinguishing between change with in behaviour and change of behaviour to complete the classification with organizational change. It relates these changes to the logical categories of learning connecting the topic of Information System design with that of organizational learning.

Dynamic ocular thermography

The ability to measure ocular surface temperature (OST) with thermal imaging offers potential insight into ocular physiology that has been acknowledged in the literature. The TH7102MX thermo-camera (NEC San-ei, Japan) continuously records dynamic information about OST without sacrificing spatial resolution. Using purpose-designed image analysis software, it was possible to select and quantify the principal components of absolute temperature values and the magnitude plus rate of temperature change that followed blinking. The techniques was examined for repeatability, reproducibility and the effects of extrinsic factors: a suitable experimental protocol was thus developed. The precise source of the measured thermal radiation has previously been subject toe dispute: in this thesis, the results of a study examining the relationships between physical parameters of the anterior eye and OST, confirmed a principal role for the tear film in OST. The dynamic changes in OST were studied in a large group of young subjects: quantifying the post-blink changes in temperature with time also established a role for tear flow dynamics in OST. Using dynamic thermography, the effects of hydrogel contact lens wear on OST were investigated: a model eye for in vivo work, and both neophyte and adapted contact lens wearers for in vivo studies. Significantly greater OST was observed in contact lens wearers, particularly with silicone hydrogel lenses compared to etafilcon A, and tended to be greatest when lenses had been worn continuously. This finding is important to understanding the ocular response to contact lens wear. In a group of normal subjects, dynamic thermography appeared to measure the ocular response to the application of artificial tear drops: this may prove to be a significant research and clinical tool.

Thin film bearings with phase change of lubricant

The possible evaporation of lubricant in fluid film bearings has been investigated theoretically and by experiment using a radial flow hydrostatic bearing supplied with liquid refrigerant R114. Good correlation between measured and theoretical values was obtained using a bespoke computational fluid dynamic model in which the flow was assumed to be laminar and adiabatic. The effects of viscous dissipation and vapour generation within the fluid film are fully accounted for by applying a fourth order Runge-Kutta routine to satisfy the radial and filmwise transverse constraints of momentum, energy and mass conservation. The results indicate that the radial velocity profile remains parabolic while the flow remains in the liquid phase and that the radial rate of enthalpy generation is then constant across the film at a given radius. The results also show that evaporation will commence at a radial location determined by geometry and flow conditions and in fluid layers adjacent to the solid boundaries. Evaporation is shown to progress in the radial direction and the load carrying capacity of such a bearing is reduced significantly. Expressions for the viscosity of the liquid/vapour mixture found in the literature survey have not been tested against experimental data. A new formulation is proposed in which the suitable choice of a characteristic constant yields close representation to any of these expressions. Operating constraints imposed by the design of the experimental apparatus limited the extent of the surface over which evaporation could be obtained, and prevented clear identification of the most suitable relationship for the viscosity of the liquid/vapour mixture. The theoretical model was extended to examine the development of two phase flow in a rotating shaft face seal of uniform thickness. Previous theoretical analyses have been based on the assumption that the radial velocity profile of the flow is always parabolic, and that the tangential component of velocity varies linearly from the value at the rotating surface, to zero at the stationary surface. The computational fluid dynamic analysis shows that viscous shear and dissipation in the fluid adjacent to the rotating surface leads to developing evaporation with a consequent reduction in tangential shear forces. The tangential velocity profile is predicted to decay rapidly through the film, exhibiting a profile entirely different to that assumed by previous investigators. Progressive evaporation takes place close to the moving wall and does not occur completely at a single radial location, as has been claimed in earlier work.

Anatomical correlates of dynamic auditory processing:relationship to literacy during early adolescence

Adults show great variation in their auditory skills, such as being able to discriminate between foreign speech-sounds. Previous research has demonstrated that structural features of auditory cortex can predict auditory abilities; here we are interested in the maturation of 2-Hz frequency-modulation (FM) detection, a task thought to tap into mechanisms underlying language abilities. We hypothesized that an individual's FM threshold will correlate with gray-matter density in left Heschl's gyrus, and that this function-structure relationship will change through adolescence. To test this hypothesis, we collected anatomical magnetic resonance imaging data from participants who were tested and scanned at three time points: at 10, 11.5 and 13 years of age. Participants judged which of two tones contained FM; the modulation depth was adjusted using an adaptive staircase procedure and their threshold was calculated based on the geometric mean of the last eight reversals. Using voxel-based morphometry, we found that FM threshold was significantly correlated with gray-matter density in left Heschl's gyrus at the age of 10 years, but that this correlation weakened with age. While there were no differences between girls and boys at Times 1 and 2, at Time 3 there was a relationship between gray-matter density in left Heschl's gyrus in boys but not in girls. Taken together, our results confirm that the structure of the auditory cortex can predict temporal processing abilities, namely that gray-matter density in left Heschl's gyrus can predict 2-Hz FM detection threshold. This ability is dependent on the processing of sounds changing over time, a skill believed necessary for speech processing. We tested this assumption and found that FM threshold significantly correlated with spelling abilities at Time 1, but that this correlation was found only in boys. This correlation decreased at Time 2, and at Time 3 we found a significant correlation between reading and FM threshold, but again, only in boys. We examined the sex differences in both the imaging and behavioral data taking into account pubertal stages, and found that the correlation between FM threshold and spelling was strongest pre-pubertally, and the correlation between FM threshold and gray-matter density in left Heschl's gyrus was strongest mid-pubertally.

HRM, organizational capacity for change, and performance:a global perspective

This special issue brings together a variety of articles, each one enriching understanding about whether and how human resource management (HRM) influences organizational performance (however defined) against a backdrop of complex change. We present a preliminary framework that enables us to integrate the diverse themes explored in the special issue, proposing a mediating role for organizational change capacity (OCC). OCC represents a particular subset within the resource-based literature labeled as “dynamic capabilities.” Although not well researched, there is evidence that OCC is positively associated with firm performance and that this relationship is stronger given conditions of high uncertainty. Our framework reflects on external and internal parameters, which we suggest moderate the relationship between human resource management (HRM), OCC, and organizational performance. Our intention is to provide compelling insight for both practitioners and researchers, especially those whose remit extends beyond national boundaries, with reference to areas of the globe as disparate as Greece, Ireland, Pakistan, Switzerland, and the United Kingdom. © 2012 Wiley Periodicals, Inc.

Organisational receptivity for change:combining context and capability to explain competitive advantage

This thesis explores efforts to conjoin organisational contexts and capabilities in explaining sustainable competitive advantage. Oliver (1997) argued organisations need to balance the need to conform to industry’s requirements to attain legitimization (e.g. DiMaggio & Powell, 1983), and the need for resource optimization (e.g. Barney, 1991). The author hypothesized that such balance can be viewed as movements along the homogeneity-heterogeneity continuum. An organisation in a homogenous industry possesses similar characteristics as its competitors, as opposed to a heterogeneous industry in which organisations within are differentiated and competitively positioned (Oliver, 1997). The movement is influenced by the dynamic environmental conditions that an organisation is experiencing. The author extended Oliver’s (1997) propositions of combining RBV’s focus on capabilities with institutional theory’s focus on organisational context, as well as redefining organisational receptivity towards change (ORC) factors from Butler and Allen’s (2008) findings. The authors contributed to the theoretical development of ORC theory to explain the attainment of sustainable competitive advantage. ORC adopts the assumptions from both institutional and RBV theories, where the receptivity factors include both organisational contexts and capabilities. The thesis employed a mixed method approach in which sequential qualitative quantitative studies were deployed to establish a robust, reliable, and valid ORC scale. The adoption of Hinkin’s (1995) three-phase scale development process was updated, thus items generated from interviews and literature reviews went through numerous exploratory factor analysis (EFA) and confirmatory factor analysis (CFA) to achieve convergent, discriminant, and nomological validities. Samples in the first phase (semi structured interviews) were hotel owners and managers. In the second phase, samples were MBA students, and employees of private and public sectors. In the third phase, samples were hotel managers. The final ORC scale is a parsimonious second higher-order latent construct. The first-order constructs comprises four latent receptivity factors which are ideological vision (4 items), leading change (4 items), implementation capacity (4 items), and change orientation (7 items). Hypotheses testing revealed that high levels of perceived environmental uncertainty leads to high levels of receptivity factor. Furthermore, the study found a strong positive correlation between receptivity factors and competitive advantage, and between receptivity factors and organisation performance. Mediation analyses revealed that receptivity factors partially mediate the relationship between perceived environmental uncertainty, competitive advantage and organisational performance.

Antecedents, mechanisms and processes of deinstitutionalization and institutional change:a case study approach to understanding enterprise under duress

Adopting a grounded theory methodology, the study describes how an event and pressure impact upon a process of deinstitutionalization and institutional change. Three case studies were theoretically sampled in relation to each other. They yielded mainly qualitative data from methods that included interviews, observations, participant observations, and document reviews. Each case consisted of a boundaried cluster of small enterprises that were not industry specific and were geographically dispersed. Overall findings describe how an event, i.e. a stimulus, causes disruption, which in turn may cause pressure. Pressure is then translated as a tension within the institutional environment, which is characterized by opposing forces that encourage institutional breakdown and institutional maintenance. Several contributions are made: Deinstitutionalization as a process is inextricable from the formation of institutions – both are needed to make sense of institutional change on a conceptual level but are also inseparable experientially in the field; stimuli are conceptually different to pressures; the historical basis of a stimulus may impact on whether pressure and institutional change occurs; pressure exists in a more dynamic capacity rather than only as a catalyst; institutional breakdown is a non-linear irregular process; ethical and survival pressures as new types were identified; institutional current, as an underpinning mechanism, influences how the tension between institutional breakdown and maintenance plays out.

Mechanisms of a change in the refractive index of an intensely pumped Yb:YAG crystal

Mechanisms of a change in the refractive index appearing in an intensely diode-pumped Yb:YAG-laser disk element are studied with the help of polarisation interferometry and dynamic grating testing. It is found that changes in the electronic component of the refractive index arising upon changing the populations of electronic levels of Yb ions (the ground F state and the upper F level of the laser transition) and caused by the difference in the polarisability of these levels are an order of magnitude greater than thermal changes in the refractive index. It is shown that the difference Δp in the polarisability at the probe wavelength of 633 nm is 1.9 × 10 cm and at the laser transition wavelength of 1029 nm is 1.6 × 10 cm. ©2006 Kvantovaya Elektronika and Turpion Ltd.