An investigation of the dynamic characteristics of a bolted-rotor system
Data(s) |
2001
|
---|---|
Resumo |
A Jeffcott rotor consists of a disc at the centre of an axle supported at its end by bearings. A bolted Jeffcott rotor is formed by two discs, each with a shaft on one side. The discs are held together by spring loaded bolts near the outer edge. When the rotor turns there is tendency for the discs to separate on one side. This effect is more marked if the rotor is unbalanced, especially at resonance speeds. The equations of motion of the system have been developed with four degrees of freedom to include the rotor and bearing movements in the respective axes. These equations which include non-linear terms caused by the rotor opening, are subjected to external force such from rotor imbalance. A simulation model based on these equations was created using SIMULINK. An experimental test rig was used to characterise the dynamic features. Rotor discs open at a lateral displacement of the rotor of 0.8 mm. This is the threshold value used to show the change of stiffness from high stiffness to low stiffness. The experimental results, which measure the vibration amplitude of the rotor, show the dynamic behaviour of the bolted rotor due to imbalance. Close agreement of the experimental and theoretical results from time histories, waterfall plots, pseudo-phase plots and rotor orbit plot, indicated the validity of the model and existence of the non-linear jump phenomenon. |
Formato |
application/pdf |
Identificador |
http://eprints.aston.ac.uk/11837/1/Isa_AAM_2001.pdf Mat Isa, Ahmad A. (2001). An investigation of the dynamic characteristics of a bolted-rotor system. PhD thesis, Aston University. |
Relação |
http://eprints.aston.ac.uk/11837/ |
Tipo |
Thesis NonPeerReviewed |