Estimating daily methane production in individual cattle with irregular feed intake patterns from short-term methane emission measurements

Spot measurements of methane emission rate (n = 18 700) by 24 Angus steers fed mixed rations from GrowSafe feeders were made over 3- to 6-min periods by a GreenFeed emission monitoring (GEM) unit. The data were analysed to estimate daily methane production (DMP; g/day) and derived methane yield (MY; g/kg dry matter intake (DMI)). A one-compartment dose model of spot emission rate v. time since the preceding meal was compared with the models of Wood (1967) and Dijkstra et al. (1997) and the average of spot measures. Fitted values for DMP were calculated from the area under the curves. Two methods of relating methane and feed intakes were then studied: the classical calculation of MY as DMP/DMI (kg/day); and a novel method of estimating DMP from time and size of preceding meals using either the data for only the two meals preceding a spot measurement, or all meals for 3 days prior. Two approaches were also used to estimate DMP from spot measurements: fitting of splines on a 'per-animal per-day' basis and an alternate approach of modelling DMP after each feed event by least squares (using Solver), summing (for each animal) the contributions from each feed event by best-fitting a one-compartment model. Time since the preceding meal was of limited value in estimating DMP. Even when the meal sizes and time intervals between a spot measurement and all feeding events in the previous 72 h were assessed, only 16.9% of the variance in spot emission rate measured by GEM was explained by this feeding information. While using the preceding meal alone gave a biased (underestimate) of DMP, allowing for a longer feed history removed this bias. A power analysis taking into account the sources of variation in DMP indicated that to obtain an estimate of DMP with a 95% confidence interval within 5% of the observed 64 days mean of spot measures would require 40 animals measured over 45 days (two spot measurements per day) or 30 animals measured over 55 days. These numbers suggest that spot measurements could be made in association with feed efficiency tests made over 70 days. Spot measurements of enteric emissions can be used to define DMP but the number of animals and samples are larger than are needed when day-long measures are made.

Estimation and evaluation of multi-decadal fire severity patterns using Landsat sensors

Retrospective identification of fire severity can improve our understanding of fire behaviour and ecological responses. However, burnt area records for many ecosystems are non-existent or incomplete, and those that are documented rarely include fire severity data. Retrospective analysis using satellite remote sensing data captured over extended periods can provide better estimates of fire history. This study aimed to assess the relationship between the Landsat differenced normalised burn ratio (dNBR) and field measured geometrically structured composite burn index (GeoCBI) for retrospective analysis of fire severity over a 23 year period in sclerophyll woodland and heath ecosystems. Further, we assessed for reduced dNBR fire severity classification accuracies associated with vegetation regrowth at increasing time between ignition and image capture. This was achieved by assessing four Landsat images captured at increasing time since ignition of the most recent burnt area. We found significant linear GeoCBI–dNBR relationships (R2 = 0.81 and 0.71) for data collected across ecosystems and for Eucalyptus racemosa ecosystems, respectively. Non-significant and weak linear relationships were observed for heath and Melaleuca quinquenervia ecosystems, suggesting that GeoCBI–dNBR was not appropriate for fire severity classification in specific ecosystems. Therefore, retrospective fire severity was classified across ecosystems. Landsat images captured within ~ 30 days after fire events were minimally affected by post burn vegetation regrowth.

Fracture Behavior of Multidirectional DCB Specimen: Higher-Order Beam Theories

Mathematical models, for the stress analysis of symmetric multidirectional double cantilever beam (DCB) specimen using classical beam theory, first and higher-order shear deformation beam theories, have been developed to determine the Mode I strain energy release rate (SERR) for symmetric multidirectional composites. The SERR has been calculated using the compliance approach. In the present study, both variationally and nonvariationally derived matching conditions have been applied at the crack tip of DCB specimen. For the unidirectional and cross-ply composite DCB specimens, beam models under both plane stress and plane strain conditions in the width direction are applicable with good performance where as for the multidirectional composite DCB specimen, only the beam model under plane strain condition in the width direction appears to be applicable with moderate performance. Among the shear deformation beam theories considered, the performance of higher-order shear deformation beam theory, having quadratic variation for transverse displacement over the thickness, is superior in determining the SERR for multidirectional DCB specimen.

Constructing Ethical Patterns in Times of Globalization : Hans Küng's Global Ethic Project and Beyond

The purpose of this study is to evaluate contemporary philosophical models for global ethics in light of the Catholic theologian Hans Küng s Global Ethic Project (Projekt Weltethos). Küng s project starts with the motto, No survival without world ethos. No global peace without peace between religions. I will use the philosophically multidimensional potential of Projekt Weltethos in terms of its possible philosophical interpretations to evaluate the general discussion of global ethics within political philosophy today. This is important in its own right, but also because through it, opportunities will emerge to articulate Küng s relatively general argument in a way that leaves less room for mutually contradictory concretizations of what global ethics ultimately should be like. The most important question in this study is the problem of religious and ideological exclusivism and its relation to the ethically consistent articulation of global ethics. I will first explore the question of the role of religion as the basis for ethics in general and what Küng may mean by his claim that only the unconditional can oblige unconditionally. I will reconstruct two different overall philosophical interpretations of the relationship between religious faith and human rationality, each having two different sub-divisions: a liberal interpretation amounts to either a Kantian-Scheiermacherian or a Jaspersian view, whereas what I call postliberal interpretation amounts to either an Aristotelian-Thomistic or an Augustinian view. Thereafter, I will further clarify how Küng views the nature of ethics beyond the question of its principal foundation in religious faith: Küng searches for a middle way between consequentialist and non-consequentialist ethics, a way in which the latter dimension has the final stake. I will then set out to concretize further this more or less general notion of the theoretical potential of Projekt Weltethos in terms of certain precise philosophico-political models. I categorize these models according to their liberal or postliberal orientation. The liberal concretization leads me to consider a wide spectrum of post-Kantian and post-Hegelian models from Rawls to Derrida, while the alternative concretization opens up my ultimate argument in favor of a postliberal type of modus vivendi. I will suggest that the only theoretically and practically plausible way to promote global ethics, in itself a major imperative today, is the recognition of a fundamental and necessary contest between mutually exclusive ideologies in the public sphere. On this basis I will proceed to my postliberal proposal, namely, that a constructive and peaceful encountering of exclusive difference as an ethical vantage point for an intercultural and inter-religious peace dialogue is the most acute challenge for global ethics today.

Gap acceptance behavior of mobile phone distracted drivers at roundabouts

While mobile phones have become ubiquitous in modern society, the use of mobile phones while driving is increasing at an alarming rate despite the associated crash risks. A significant safety concern is that driving while distracted by a mobile phone is more prevalent among young drivers, a less experienced driving cohort with elevated crash risk. The objective of this study was to examine the gap acceptance behavior of distracted young drivers at roundabouts. The CARRS-Q Advanced Driving Simulator was used to test participants on a simulated gap acceptance scenario at roundabouts. Conflicting traffic from the right approach of a four-legged roundabout were programmed to have a series of vehicles having the gaps between them proportionately increased from two to six seconds. Thirty-two licensed young drivers drove the simulator under three phone conditions: baseline (no phone conversation), hands-free and handheld phone conversations. Results show that distracted drivers started responding to the gap acceptance scenario at a distance closer to the roundabout and approached the roundabout at slower speeds. They also decelerated at faster rates to reduce their speeds prior to gap acceptance compared to non-distracted drivers. Although accepted gap sizes were not significantly different across phone conditions, differences in the safety margins at various gap sizes—measured by Post Encroachment Time (PET) between the driven vehicle and the conflicting vehicle—were statistically significant across phone conditions. PETs for distracted drivers were smaller across different gap sizes, suggesting a lower safety margin taken by distracted drivers compared to non-distracted drivers. The results aid in understanding how cognitive distraction resulting from mobile phone conversations while driving influences driving behavior during gap acceptance at roundabouts.

Evolution of Social Behavior Through Interpopulation Selection

Under certain special conditions natural selection can be effective at the level of local populations, or demes. Such interpopulation selection will favor genotypes that reduce the probability of extinction of their parent population even at the cost of a lowered inclusive fitness. Such genotypes may be characterized by altruistic traits only in a viscous population, i.e., in a population in which neighbors tend to be closely related. In a non-viscous population the interpopulation selection will instead favor spiteful traits when the populations are susceptible to extinction through the overutilization of the habitat, and cooperative traits when it is the newly established populations that are in the greatest danger of extinction.

Can moral potency and psychological risk close the gap between ethical beliefs and unacceptable consumer behavior?

Depending on how they perceive risk, consumers may not always act according to their ethical beliefs, exposing a gap between beliefs and behavior. We investigate the effect of moral potency on perceived psychological risk of committing an unacceptable behavior. The results suggest that perceived risk is triggered by moral ownership.

A review on exploring the behavior of multi-layer composite structures under dynamic loading

This paper reviews the recent research progress on multi-layer composite structures composed of variety of materials. The utilization of multi-layer composite system is found to be common in metal structures and pavement systems. The layer of composite structure designed to encounter heavy dynamic energy should have sufficient ductility to counteract the intensity of energy. Therefore, the selection of materials and enhancement of interface bonding become crucial and both are discussed in this paper. The failure modes have also been explored in conjunction with stresses at failures and inferred solutions are also revealed. The paper attempts to reveal all technical facts on multi-layer composite structure in a broad field.

Patterns of support in an online community for smoking cessation

Social support offers various benefits for health and behaviour change. However, previous work has shown that individuals are typically reluctant to ask for support on social network sites, unless they can present a changed, healthier identity. To examine the relationship between stage of change and social support we conducted a thematic analysis of messages posted in a public Facebook support group for people trying to quit smoking. Our findings show that the kind of support exchanged online is related to participants' stage of change. Contrary to our expectations, supportive responses and leadership in the support group came mainly from users who just started their change process rather than people who had already changed. We discuss contributions to theories of online participation and impression management as well as implications for practitioners who seek to establish support groups.

Expanding the research area of behavior change support systems

The First International Workshop on Behavior Change Support Systems attracted a great research interest. The selected papers focused on abstraction, implementation and evaluation of Behavior Change Support Systems. The workshop is an evidence of how researchers from around the globe have their own perspective of behavior change interventions. In this abstract, we have attempted to outline core issues that can enhance persuasiveness of such support systems. Finally, we highlight important research questions relating to the development of effective Behavior Change Support Systems.

Flexural Strength of Modified Square Footings

The ultimate flexural strength behavior of isolated square tapered and beam-slab reinforced footings are presented. Yield line solutions are developed for generalized contact pressure distributions and the influence of taper, beam size, fillet size, negative moment capacity, and contact pressure distribution on the collapse load is brought out. In beam-slab footings the optimum relative beam capacity required to make the beam rigid is indicated. Results of experimental investigations on footings resting on sand reveal that tapered (with isotropic as well as with alternative reinforcement patterns) and beam-slab footings exhibit superior structural behavior in terms of normalized first crack load, collapse load, relative rigidity, relative efficiency, and failure mechanism.