Desenvolvimento de um novo complexo macrocíclico do sistema cobalto cyclam

In this work were synthesized and studied the spectroscopic and electrochemical characteristics of the coordination compounds trans-[Co (cyclam)Cl2]Cl, trans- Na[Co(cyclam)(tios)2], trans-[Co(en)2Cl2]Cl and trans-Na[Co(en)2(tios)2], where tios = thiosulfate and en = ethylenediamine. The compounds were characterized by: Elemental Analysis (CHN), Absorption Spectroscopy in the Infrared (IR), Uv-Visible Absorption Spectroscopy, Luminescence Spectroscopy and Electrochemistry (cyclic voltammetry). Elemental Analysis (CHN) suggests the following structures for the complex: trans- [Co(cyclam)Cl2]Cl.6H2O and trans-Na[Co(cyclam)(tios)2].7H2O. The electrochemical analysis, when compared the cathodic potential (Ec) processes of the complexes trans- [Co(cyclam)Cl2]Cl and trans-[Co(en)2Cl2]Cl, indicated a more negative value (-655 mV) for the second complex, suggesting a greater electron donation to the metal center in this complex which can be attributed to a greater proximity of the nitrogen atoms of ethylenediamine in relation to metal-nitrogen cyclam. Due to the effect of setting macrocyclic ring to the metal center, the metal-nitrogen bound in the cyclam are not as close as the ethylenediamine, this fact became these two ligands different. Similar behavior is also observed for complexes in which the chlorides are replaced by thiosulfate ligand, trans-Na[Co(en)2(tios)2] (-640 mV) and trans-Na[Co(cyclam)(tios)2] (-376 mV). In absorption spectroscopy in the UV-visible, there is the band of charge transfer LMCT (ligand p d* the metal) in the trans-Na[Co(cyclam)(tios)2] (350 nm, p tios  d* Co3+) and in the trans-Na[Co(en)2(tios)2] (333 nm, p tios d* Co3+), that present higher wavelength compared to complex precursor trans- [Co(cyclam)Cl2]Cl (318 nm, pCl  d* Co3+), indicating a facility of electron density transfer for the metal in the complex with the thiosulfate ligand. The infrared analysis showed the coordination of the thiosulfate ligand to the metal by bands in the region (620-635 cm-1), features that prove the monodentate coordination via the sulfur atom. The νN-H bands of the complexes with ethylenediamine are (3283 and 3267 cm-1) and the complex with cyclam bands are (3213 and 3133 cm-1). The luminescence spectrum of the trans-Na[Co(cyclam)(tios)2] present charge transfer band at 397 nm and bands dd at 438, 450, 467, 481 and 492 nm.

Desenvolvimento e teste de um modelo estatístico de identificação das proporções de água produzida em zonas de produção de um campo maduro de petróleo

This study investigates the chemical species produced water from the reservoir areas of oil production in the field of Monte Alegre (onshore production) with a proposal of developing a model applied to the identification of the water produced in different zones or groups of zones.Starting from the concentrations of anions and cátions from water produced as input parameters in Linear Discriminate Analysis, it was possible to estimate and compare the model predictions respecting the particularities of their methods in order to ascertain which one would be most appropriate. The methods Resubstitution, Holdout Method and Lachenbruch were used for adjustment and general evaluation of the built models. Of the estimated models for Wells producing water for a single production area, the most suitable method was the "Holdout Method and had a hit rate of 90%. Discriminant functions (CV1, CV2 and CV3) estimated in this model were used to modeling new functions for samples ofartificial mixtures of produced water (producedin our laboratory) and samples of mixtures actualproduced water (water collected inwellsproducingmore thanonezone).The experiment with these mixtures was carried out according to a schedule experimental mixtures simplex type-centroid also was simulated in which the presence of water from steam injectionin these tanks fora part of amostras. Using graphs of two and three dimensions was possible to estimate the proportion of water in the production area

Adubação nitrogenada e potássica no desenvolvimento de mudas de maracujazeiro

Este trabalho objetivou avaliar os efeitos da adubação com N e K no desenvolvimento de mudas de maracujazeiro-amarelo (Passiflora edulis) cultivadas em Latossolo Vermelho distrófico. O delineamento experimental foi o inteiramente casualizado, com três repetições, num esquema fatorial 4 x 4, com 4 doses de N (zero, 150, 300 e 600mg de N dm-3) e quatro de K (zero, 75, 150 e 300mg de K dm-3), parceladas em quatro vezes. A unidade experimental foi constituída por vasos de 3,3L. Após 84 dias da germinação, foram avaliados: altura da planta, o diâmetro do caule, o número de folhas e a área foliar. O melhor desenvolvimento das mudas de maracujazeiro ocorreu com as doses de 150mg de N dm-3 e de 300mg de K dm-3.

Desenvolvimento de misturas ternárias para remoção de reboco de fluido de perfuração sintético

The construction of wells is one of the most important activities of the oil industry. The drilling process is the set of activities and operations to design, program and perform the opening thereof. During this process, the cuttings are removed by the drilling fluid, or mud, and carted to the surface. This fluid is injected into the drill string and returns to the surface through the annular space between the well walls and the drill string. After the descent of the column casing, the annular space between the casing string and the walls of the borehole is filled with cement so as to secure the spine and prevent any migration of fluids between the various permeable zones traversed by the well behind of the coating. To ensure the good quality of the cementation scrubbers are used mattresses which are pumped ahead of the cement slurry so as to avoid contamination of the drilling fluid paste, or vice versa, and assist in the removal of plaster, formed by drilling fluid of the borehole walls, thus enabling a better cement bond to the well. Within this context, this work aims to evaluate the efficiency of mattresses scrubbers, the basis of ionic and nonionic surfactants, on the removal of nonaqueous drilling fluid, based on n-paraffin in oil wells, and the compatibility between the Mattress relations washer / drilling fluid bed scrubber / cement paste mattress washer / cement slurry / drilling fluid and the drilling fluid / cement slurry using laboratory tests rheology, thickening time and compressive strength. Also technique was performed X-ray diffraction (XRD) for a more detailed analysis of these mixtures with hydrated cement paste. In compatibility tests the conditions of temperature and pressure used in the same laboratory procedure simulating the conditions of oil wells, the well is considered the depth of 800 m. The results showed that the compositions of the mattress washer nonionic, KMS obtained a 100% efficient in removing the non-aqueous drilling fluid, and the best formulation showed good results with respect to compliance testing

Desenvolvimento de metodologia capaz de detectar e quantificar misturas de corantes em sucos artificiais em pó

Foi desenvolvido um método para detectar e quantificar misturas de corantes em sucos artificiais em pó fabricados no Brasil, de diferentes marcas e sabores. Foram estudados 6 corantes artificiais: amarelo tartrazina, amarelo crepúsculo, vermelho ponceau 4R, vermelho bordeaux S, vermelho 40 e azul brilhante presentes de forma unitária ou em misturas nos sucos com sabores laranja, tangerina, maracujá, abacaxi, limão e uva. A identificação dos corantes nas amostras foi feita através da comparação com os espectros dos padrões, utilizando-se a análise por infravermelho médio e pelos respectivos valores de absorção máxima nos comprimentos de onda relativos aos padrões e valores de referência na literatura. Também foram estudados os perfis de decomposição térmica por termogravimetria, termogravimetria derivada e calorimetria diferencial exploratória dos corantes e dos sucos em pó, sendo determinados os teores de umidade, de matéria orgânica e de cinzas. O teor de umidade encontrado não ultrapassou 4% para todas as amostras de suco analisadas. Com relação ao teor de matéria orgânica obteve-se para 57% dos sucos analisados um teor médio de 51,3% e para 43% das outras amostras obteve-se uma média de 67,2 %. Os resultados obtidos para o teor de cinzas indicaram que 29% das amostras apresentaram um teor de 26,7% para esse parâmetro enquanto 71% das amostras apresentaram um teor de cinzas de 46,4%. Os resultados obtidos por análise térmica mostraram-se adequados considerando-se que para obter os resultados pelo método tradicional há um investimento maior de tempo, de pessoal envolvido e de material, além da proteção ao meio ambiente. Para a análise por espectroscopia de absorção molecular foi proposta uma equação simplificada para a determinação de cada corante na mistura utilizando-se a lei de Beer. Para validação, empregou-se a espectroscopia de absorção molecular no visível, onde foi investigada a influência dos interferentes (TiO2 e açúcar) presentes nas amostras de sucos, os testes de fotodegradação e a avaliação do efeito do pH. Para quantificação tomou-se como referência 512 amostras sintéticas contendo um e dois corantes (1,5625 a 25,000 mg L-1) para obtenção das curvas analíticas que foram aplicadas à análise dos sucos em pó. Os resultados indicaram que o teor máximo do amarelo crepúsculo foi encontrado nos sucos com os sabores laranja, tangerina e manga que correspondeu a 25,6% da ingestão diária aceitável (para ser ultrapassada corresponderia a ingestão de 4 copos). O teor máximo encontrado para o amarelo tartrazina nos sucos foi para o sabor maracujá que correspondeu a 8,5% da ingestão diária aceitável, (para ser alcançado corresponderia a ingestão de 12 copos). O método proposto foi testado e validado com sucesso para amostras de sucos em pó sendo de simples execução e de rapidez na obtenção dos resultados

Desenvolvimento de catalisadores bifuncionais de óxido de zircônio modificado por óxidos de tungstênio e molibdênio contendo platina para a reação de isomerização de n-parafinas

Bifunctional catalysts based on zircon oxide modified by tungsten (W = 10, 15 and 20 %) and by molybdenum oxide (Mo= 10, 15 e 20 %) containg platinum (Pt = 1%) were prepared by the polymeric precursor method. For comparison, catalysts the tungsten base was also prepared by the impregnation method. After calcinations at 600, 700 and 800 ºC, the catalysts were characterized by X-ray diffraction, fourier-transform infrared spectroscopy, thermogravimetric and differential thermal analysis, nitrogen adsorption and scanning electron microscopy. The profile of metals reduction was determined by temperature programmed reduction. The synthesized catalysts were tested in n-heptane isomerization. X-ray diffractogram of the Pt/WOx-ZrO2 and Pt/MoOx-ZrO2 catalysts revealed the presence of tetragonal ZrO2 and platinum metallic phases in all calcined samples. Diffraction peaks due WO3 and ZrO2 monoclinic also were observed in some samples of the Pt/WOx-ZrO2 catalysts. In the Pt/MoOx-ZrO2 catalysts also were observed diffraction peaks due ZrO2 monoclinic and Zr(MoO4)2 oxide. These phases contained on Pt/WOx-ZrO2 and Pt/MoOx-ZrO2 catalysts varied in accordance with the W or Mo loading and in accordance with the calcination temperature. The infrared spectra showed absorption bands due O-W-O and W=O bonds in the Pt/WOx-ZrO2 catalysts and due O-Mo-O, Mo=O and Mo-O bonds in the Pt/MoOx-ZrO2 catalysts. Specific surface area for Pt/WOx-ZrO2 catalysts varied from 30-160 m2 g-1 and for the Pt/MoOx-ZrO2 catalysts varied from 10-120 m2 g-1. The metals loading (W or Mo) and the calcination temperature influence directly in the specific surface area of the samples. The reduction profile of Pt/WOx-ZrO2 catalysts showed two peaks at lower temperatures, which are attributed to platinum reduction. The reduction of WOx species was evidenced by two reduction peak at high temperatures. In the case of Pt/MoOx-ZrO2 catalysts, the reduction profile showed three reduction events, which are attributed to reduction of MoOx species deposited on the support and in some samples one of the peak is related to the reduction of Zr(MoO4)2 oxide. Pt/WOx-ZrO2 catalysts were active in the n-heptane isomerization with high selectivity to 3-methyl-hexane, 2,3- dimethyl-pentane, 2-methyl-hexane among other branched hydrocarbons. The Pt/MoOx-ZrO2 catalysts practically didn't present activity for the n-heptane isomerization, generating mainly products originating from the catalytic cracking

Aprendizagem na interação ensino-serviço-comunidade: a formação na perspesctiva dialógica com a sociedade

Considerando o papel do ensino superior em saúde para a sociedade brasileira, em que os egressos dos cursos ofertados na área serão os profissionais prestadores de serviços à população, este estudo objetivou analisar o componente ensino do PET-Saúde da Família - Natal-RN na formação de estudantes dos cursos de graduação em saúde da UFRN. Foi realizada pesquisa qualitativa com análise de documentos das disciplinas SACI e POTI datados entre 2009 e 2011 (portfólios, avaliações de desempenho e oficina de avaliação), mediante o auxílio do software Alceste© e análise de conteúdo, segundo Bardin. Na análise foi encontrado como potencialidades: o alunato trabalhando em grupo tutorial multidisciplinar, cuja interação e contato com a Unidade de Saúde da Família, incluídos os profissionais, bem como a comunidade, instiga nos aprendizes o diálogo consigo mesmo e com o outro, numa construção dos ser/agir no mundo. Os textos trabalhados durante as aulas permitem refletir e teorizar a respeito da realidade observada, auxiliando-os na identificação dos problemas e no traçar estratégias de intervenção. Já a observação da realidade reveste o aluno de humanização. Este passa a captar as necessidades e dificuldades enfrentadas pela comunidade observada. Nas fragilidades ficaram evidenciados: problemas de relações interpessoais entre os estudantes da SACI; a maioria dos projetos de intervenção ocorrendo numa perspectiva paternalista, reproduzindo o modelo de prestação de serviços na saúde mais praticado nas sociedades brasileiras; dificuldades em aprofundar no aprendiz, a importância da teorização dos assuntos; problemas de financiamento de projetos de intervenção; descumprimento do plano de ensino em alguns grupos tutoriais; e, por fim, dificuldades dos alunos e monitores em acompanhar as atividade de pesquisa e extensão do PET-Saúde, pela falta de integração dos projetos pedagógicos dos cursos. Conclui-se que o componente ensino do PET-Saúde da Família adota metodologias ativas de ensino na inserção de alunos na Atenção Primária em Saúde, proporcionando uma formação dentro de princípios éticos e humanísticos a partir do trabalho em equipe e da inclusão reflexiva dos alunos na Estratégia Saúde da Família. Apesar da existência de fragilidades concernentes às relações interpessoais, descompasso entre as proposições multiprofissionais e interdisciplinares da SACI e POTI e as dificuldades de pô-las em prática em currículos fragmentados e organizados por disciplinas pouco flexíveis, potencialmente, ao fim dessas experiências conectadas a Atenção Primária, os discentes apresentam uma nova visão do cuidado com a saúde, próxima às necessidades da população, iniciando uma tomada de postura crítica e reflexiva, entendendo-se com sujeitos ativos no construir a saúde coletivamente

Política de transferência de renda e desenvolvimento local: o programa Bolsa família no município de Pedra Grande/RN

The Family Scolarship Program while public politics of intersectorial form developed by Social Development Department and Famine Combat having with partner the Education Department and Health Department inaugurate in the country a new integrity way of the public politics, reinforcing a precept of 2004 Social Protection National Politics (PNAS 2004) that places the social protection while allied to the social and human development. The research INCOME TRANSFER AND LOCAL DEVELOPMENT: the family scolarship program in Pedra Grande-RN municipally had as aim to avaluate the permanent Family Scolarship Program as a possible element in local development of Pedra Grande-RN municipally understood as capacity expansion and improvement of life quality from its users. For this means we elaborate specifically the families` socio-economical profile; we avaluate the program repercussion in these families` lives; we analyse in which proportion occurred the capacity expansion and improvement of life quality of the users. The methodologic process was constituted by: literarture review about Income Transfer, Social Vulnerability, Development and Public Politics Avaluation to the criation of a theoric picture analysis. The documental research joined to the Social Development Department and Famine Combat of Pedra Grande Municipally Hall to obtain of the aims, program goals, and the profile of users. And finally, carrying out the interviews with the managers and experts of the Municipally Program and focal groups with the users to avaluate the permanent of the Program starting by the points of view of those ones. It was verified that the program expand the capacity (food, consumer goods and services, bank services access and wages) and improvement in life quality of the users. Nevertheless, there are deficiencies in coming with conditionality and from the use of resources the by families users

Influência do tamanho e da forma da semente de milho sobre o desenvolvimento da planta e a produtividade de grãos

Due to the small and the round seeds represent a rather high proportion of an ear, this experiment viewed to study the effects of those factors on seed germinative performance in the field as well as on the plant traits related to grain yield. Six treatment combinations replicated five times were sown in Votuporanga/SP on 08/22/2008. Flat shaped (C) and round shaped (R) seeds were made to go through flat round and oblong hole screens which resulted in the following treatments: 1. C1: seeds remaining on the top of a 23/64 '' round hole screen, 2. C2G: 21/64 '', 3. C3M: 17/64 '' or 16/64 '', 4. R2GM: medium length seeds remaining on the top of 13 x 3/4 '' oblong hole screen, 5. R3M: medium length seeds remaining on a 12 x 3/4 '' (from 1 to 2 mm bigger than R3), and 6. R3: 12 x 3/4 ''. The soil of the experimental area was submitted to a no-till cultivation system and the rows were set 0.6 m apart from one another. Fifteen days after emergence (DAE), the plants were thinned to a population of 66,000 plants/ha. Harvest took place 115 DAE and the mean yield was of 12,498 kg ha(-1). Based on the results it was concluded that only the initial growth of the plants is significantly affected by seed size. Plant traits such as plant height, ear insertion height, culm diameter, number of grains per year, grain weight and size as well as grain yield evaluated 40 or more DAE are not significantly affected by seed size or seed shape.

Desenvolvimento formal de aplicações para smartcards

Smart card applications represent a growing market. Usually this kind of application manipulate and store critical information that requires some level of security, such as financial or confidential information. The quality and trustworthiness of smart card software can be improved through a rigorous development process that embraces formal techniques of software engineering. In this work we propose the BSmart method, a specialization of the B formal method dedicated to the development of smart card Java Card applications. The method describes how a Java Card application can be generated from a B refinement process of its formal abstract specification. The development is supported by a set of tools, which automates the generation of some required refinements and the translation to Java Card client (host) and server (applet) applications. With respect to verification, the method development process was formalized and verified in the B method, using the Atelier B tool [Cle12a]. We emphasize that the Java Card application is translated from the last stage of refinement, named implementation. This translation process was specified in ASF+SDF [BKV08], describing the grammar of both languages (SDF) and the code transformations through rewrite rules (ASF). This specification was an important support during the translator development and contributes to the tool documentation. We also emphasize the KitSmart library [Dut06, San12], an essential component of BSmart, containing models of all 93 classes/interfaces of Java Card API 2:2:2, of Java/Java Card data types and machines that can be useful for the specifier, but are not part of the standard Java Card library. In other to validate the method, its tool support and the KitSmart, we developed an electronic passport application following the BSmart method. We believe that the results reached in this work contribute to Java Card development, allowing the generation of complete (client and server components), and less subject to errors, Java Card applications.

BSmart: desenvolvimento rigoroso de aplicações Java Card com base no método formal B

Java Card technology allows the development and execution of small applications embedded in smart cards. A Java Card application is composed of an external card client and of an application in the card that implements the services available to the client by means of an Application Programming Interface (API). Usually, these applications manipulate and store important information, such as cash and confidential data of their owners. Thus, it is necessary to adopt rigor on developing a smart card application to improve its quality and trustworthiness. The use of formal methods on the development of these applications is a way to reach these quality requirements. The B method is one of the many formal methods for system specification. The development in B starts with the functional specification of the system, continues with the application of some optional refinements to the specification and, from the last level of refinement, it is possible to generate code for some programming language. The B formalism has a good tool support and its application to Java Card is adequate since the specification and development of APIs is one of the major applications of B. The BSmart method proposed here aims to promote the rigorous development of Java Card applications up to the generation of its code, based on the refinement of its formal specification described in the B notation. This development is supported by the BSmart tool, that is composed of some programs that automate each stage of the method; and by a library of B modules and Java Card classes that model primitive types, essential Java Card API classes and reusable data structures

Estudo da viabilidade do desenvolvimento de sistemas integrados baseados em redes em chip sem processadores: sistema IPNoSys

The increase of capacity to integrate transistors permitted to develop completed systems, with several components, in single chip, they are called SoC (System-on-Chip). However, the interconnection subsystem cans influence the scalability of SoCs, like buses, or can be an ad hoc solution, like bus hierarchy. Thus, the ideal interconnection subsystem to SoCs is the Network-on-Chip (NoC). The NoCs permit to use simultaneous point-to-point channels between components and they can be reused in other projects. However, the NoCs can raise the complexity of project, the area in chip and the dissipated power. Thus, it is necessary or to modify the way how to use them or to change the development paradigm. Thus, a system based on NoC is proposed, where the applications are described through packages and performed in each router between source and destination, without traditional processors. To perform applications, independent of number of instructions and of the NoC dimensions, it was developed the spiral complement algorithm, which finds other destination until all instructions has been performed. Therefore, the objective is to study the viability of development that system, denominated IPNoSys system. In this study, it was developed a tool in SystemC, using accurate cycle, to simulate the system that performs applications, which was implemented in a package description language, also developed to this study. Through the simulation tool, several result were obtained that could be used to evaluate the system performance. The methodology used to describe the application corresponds to transform the high level application in data-flow graph that become one or more packages. This methodology was used in three applications: a counter, DCT-2D and float add. The counter was used to evaluate a deadlock solution and to perform parallel application. The DCT was used to compare to STORM platform. Finally, the float add aimed to evaluate the efficiency of the software routine to perform a unimplemented hardware instruction. The results from simulation confirm the viability of development of IPNoSys system. They showed that is possible to perform application described in packages, sequentially or parallelly, without interruptions caused by deadlock, and also showed that the execution time of IPNoSys is more efficient than the STORM platform

Um ambiente multi-middleware para desenvolvimento de aplicações distribuídas

This work presents a proposal of a multi-middleware environment to develop distributed applications, which abstracts different underlying middleware platforms. This work describes: (i) the reference architecture designed for the environment, (ii) an implementation which aims to validate the specified architecture integrating CORBA and EJB, (iii) a case study illustrating the use of the environment, (iv) a performance analysis. The proposed environment allows interoperability on middleware platforms, allowing the reuse of components of different kinds of middleware platforms in a transparency away to the developer and without major losses in performance. Also in the implementation we developed an Eclipse plugin which allows developers gain greater productivity at developing distributed applications using the proposed environment

Uma arquitetura de referência para o desenvolvimento de sistemas interativos multiplataformas

It is increasingly common use of a single computer system using different devices - personal computers, telephones cellular and others - and software platforms - systems graphical user interfaces, Web and other systems. Depending on the technologies involved, different software architectures may be employed. For example, in Web systems, it utilizes architecture client-server - usually extended in three layers. In systems with graphical interfaces, it is common architecture with the style MVC. The use of architectures with different styles hinders the interoperability of systems with multiple platforms. Another aggravating is that often the user interface in each of the devices have structure, appearance and behaviour different on each device, which leads to a low usability. Finally, the user interfaces specific to each of the devices involved, with distinct features and technologies is a job that needs to be done individually and not allow scalability. This study sought to address some of these problems by presenting a reference architecture platform-independent and that allows the user interface can be built from an abstract specification described in the language in the specification of the user interface, the MML. This solution is designed to offer greater interoperability between different platforms, greater consistency between the user interfaces and greater flexibility and scalability for the incorporation of new devices

Utilizando mapas de conectividade fuzzy no desenvolvimento de algoritmos reparadores de imagens binárias 3D

A 3D binary image is considered well-composed if, and only if, the union of the faces shared by the foreground and background voxels of the image is a surface in R3. Wellcomposed images have some desirable topological properties, which allow us to simplify and optimize algorithms that are widely used in computer graphics, computer vision and image processing. These advantages have fostered the development of algorithms to repair bi-dimensional (2D) and three-dimensional (3D) images that are not well-composed. These algorithms are known as repairing algorithms. In this dissertation, we propose two repairing algorithms, one randomized and one deterministic. Both algorithms are capable of making topological repairs in 3D binary images, producing well-composed images similar to the original images. The key idea behind both algorithms is to iteratively change the assigned color of some points in the input image from 0 (background)to 1 (foreground) until the image becomes well-composed. The points whose colors are changed by the algorithms are chosen according to their values in the fuzzy connectivity map resulting from the image segmentation process. The use of the fuzzy connectivity map ensures that a subset of points chosen by the algorithm at any given iteration is the one with the least affinity with the background among all possible choices