Inelastic dynamic response of R.C. beam column joints by using B.E.M.

A BEM formulation to obtain the inelastic response of R.C. Beam-Column joints subjected to sinusoidal loading along the boundary is presented. The equations of motion are written along with kinematical and constitutive equations. The dynamic reciprocal theorem is presented and the temporal dependence is removed by assuming steady state response.

A Shared European History? Perceptions of Imperialism and Islam in Matriculation Examination Essays and History Textbooks

The European Union (EU) is faced with a continuous decrease in public support. There is a tension between the growing Euroscepticism and the concurrent academic discourse of a shared European identity. Informed and inspired by the current debates, this Master’s Thesis investigates the potential of a shared past to create shared identity. It also addresses the logic of cultural exclusion that is often connected to collective cultural identities. The source material is a combination of exam essays, written as answers to the history tests in the Finnish matriculation examinations of 2005-2008, and upper secondary school history textbooks. From the sources, current perceptions of Islam (as Europe’s Other) and the age of imperialism (as a debated period from Europe’s past) among the youth are studied. Through the analysis the thesis aims to indicate the level of consensus within the pupils’ identification with the past and with Europe. This objective is pursued through examining the pupils’ perceptions of Europe’s past and its relationship to non-European cultures and countries as they are manifested in the essays, and reflecting upon the level of influence that history textbooks as representatives of national hegemonic historical narratives might have on the contents, framings and emphases with and through which the pupils approach, imagine, and reproduce Europe’s past. The approach is based on previous research on the presence of history and the field of textbook research. The theoretical categories with which the sources are analyzed are derived primarily from literature on identity, European integration, history and memory, postcolonial criticism, and theorizations of European identity. Results of the research project suggest that the rhetoric of European superiority, despite its apparent demise, still resonates in contemporary understandings of Europeanness. Dominant perceptions of imperialism comprise of European agency and colonial submission, dominant perceptions of the Islamic world of fundamental difference. Identification with European history among the Finnish youth is rather shallow when examined through perceptions of imperialism; the Islamic world is perceived as Other and its representations are dominated by recent and contemporary international relations.

Whose ETSIP? National and local ownership of Namibia's education and training sector improvement programme

Tämä työ tarkastelee kansallista ja paikallista omistajuutta Namibian opetussektorin kehittämisohjelmassa. Opetussektorin kehittämisohjelma ETSIP on 15-vuotinen sektoriohjelma vuosille 2005-2015 ja sen tavoitteena on edesauttaa Namibian kehittymistä tietoyhteiskunnaksi. Tutkimuksen tarkoituksena on selvittää miten kansallinen ja paikallinen omistajuus on toteutunut ETSIP prosessin aikana. Erityisesti pyritään selvittämään paikallistason opetussektorin virkamiesten näkemyksiä ETSIP prosessista, heidän roolistaan siinä ja siitä millaisia vaikuttamisen ja hallinnan mahdollisuuksia heillä on ollut prosessin aikana. Tutkimuksen lähtökohta on laadullinen ja lähestymistapa konstruktionistinen: tutkimus tarkastelee todellisuutta ihmisten kokemusten, näkemysten ja toiminnan kautta. Tutkimusaineisto koostuu haastatteluista, epävirallisista keskusteluista, lehtiartikkeleista ja ETSIP dokumenteista. Tutkimus osoittaa että kansallinen omistajuus on epämääräinen käsite sillä kansallisia toimijoita ja näkemyksiä on useita. Tutkimus vahvistaa Castel-Brancon huomion siitä, että omistajuutta on tarkasteltava kontekstissaan: muuttuvana ja kilpailtuna. ETSIPin rinnalle ollaan valmistelemassa uutta strategista ohjelmaa opetusministeriölle mikä saattaa muuttaa omistajuutta ETSIPiin. ETSIP dokumenttien omistajuusretoriikka myötäilee kansainvälisiä sitoumuksia avun vaikuttavuuden parantamiseksi mutta niistä puuttuu syvällisempi analyysi siitä, miten kansallinen ja paikallinen omistajuus toteutuisi käytännössä. Avunantajien näkemys omistajuudesta on suppea: omistajuus nähdään lähinnä sitoutumisena ennalta määrättyyn politiikkaohjelmaan. Haastatteluaineistosta nousee esiin Whitfieldin ja Frazerin jaottelu suppeista ja laajoista omistajuuskäsityksistä. Sitoutumista ETSIP ohjelmaan pidetään tärkeänä mutta riittämättömänä määritteenä omistajuudelle. Paikallisella tasolla sitoutuminen ETSIP ohjelman periaatteisiin ja tavoitteisiin on toteutunut melko hyvin mutta jos omistajuutta tarkastellaan laajemmin vaikutusvallan ja hallinnan käsitteiden kautta voidaan todeta että omistajuus on ollut heikkoa. Paikallisella tasolla ei ole ollut juurikaan vaikutusvaltaa ETSIP ohjelman sisältöön eikä mahdollisuutta hallita ohjelman toteutusta ja päättää siitä mitä hankkeita ohjelman kautta rahoitetaan. Tujanin demokraattisen omistajuuden käsite kuvaa tarvetta muuttaa ja laajentaa omistajuusajattelua huomioiden paikallisen tason paremmin. Tämä tutkimus viittaa siihen että omistajuuden toteutuminen paikallisella tasolla edellyttäisi institutionaalisen kulttuurin muutosta ja institutionaalisen legitimiteetin vahvistamista. Omistajuuden mahdollistamiseksi paikallisella tasolla tarvittaisiin poliittista johtajuutta, luottamusta, vastuullisuuden kulttuurin kehittämistä, tehokkaampaa tiedonjakoa, laajaa osallistumista, vuoropuhelua ja yhteistyötä. Ennen kaikkea tarvittaisiin paikallisen tason vaikutusvaltaa päätöksenteossa ja kontrollia resurssien käytöstä. Tälle muutokselle on selvä tarve ja tilaus.

A finite element analysis of dynamic fracture initiation by ductile failure mechanisms in a 4340 steel

In some recent dropweight impact experiments [5] with pre-notched bend specimens of 4340 steel, it was observed that considerable crack tunneling occurred in the interior of the specimen prior to gross fracture initiation on the free surfaces. The final failure of the side ligaments happened because of shear lip formation. The tunneled region is characterized by a flat, fibrous fracture surface. In this paper, the experiments of [5] (corresponding to 5 m/s impact speed) are analyzed using a plane strain, dynamic finite element procedure. The Gurson constitutive model that accounts for the ductile failure mechanisms of micro-void nucleation, growth and coalescence is employed. The time at which incipient failure was observed near the notch tip in this computation, and the value of the dynamic J-integral, J d, at this time, compare reasonably well with experiments. This investigation shows that J-controlled stress and deformation fields are established near the notch tip whenever J d , increases with time. Also, it is found that the evolution of micro-mechanical quantities near the notch root can be correlated with the time variation of J d .The strain rate and the adiabatic temperature rise experienced at the notch root are examined. Finally, spatial variations of stresses and deformations are analyzed in detail.

Constructing a Community : Myths and Realities of the Open Development Model

The open development model of software production has been characterized as the future model of knowledge production and distributed work. Open development model refers to publicly available source code ensured by an open source license, and the extensive and varied distributed participation of volunteers enabled by the Internet. Contemporary spokesmen of open source communities and academics view open source development as a new form of volunteer work activity characterized by hacker ethic and bazaar governance . The development of the Linux operating system is perhaps the best know example of such an open source project. It started as an effort by a user-developer and grew quickly into a large project with hundreds of user-developer as contributors. However, in hybrids , in which firms participate in open source projects oriented towards end-users, it seems that most users do not write code. The OpenOffice.org project, initiated by Sun Microsystems, in this study represents such a project. In addition, the Finnish public sector ICT decision-making concerning open source use is studied. The purpose is to explore the assumptions, theories and myths related to the open development model by analysing the discursive construction of the OpenOffice.org community: its developers, users and management. The qualitative study aims at shedding light on the dynamics and challenges of community construction and maintenance, and related power relations in hybrid open source, by asking two main research questions: How is the structure and membership constellation of the community, specifically the relation between developers and users linguistically constructed in hybrid open development? What characterizes Internet-mediated virtual communities and how can they be defined? How do they differ from hierarchical forms of knowledge production on one hand and from traditional volunteer communities on the other? The study utilizes sociological, psychological and anthropological concepts of community for understanding the connection between the real and the imaginary in so-called virtual open source communities. Intermediary methodological and analytical concepts are borrowed from discourse and rhetorical theories. A discursive-rhetorical approach is offered as a methodological toolkit for studying texts and writing in Internet communities. The empirical chapters approach the problem of community and its membership from four complementary points of views. The data comprises mailing list discussion, personal interviews, web page writings, email exchanges, field notes and other historical documents. The four viewpoints are: 1) the community as conceived by volunteers 2) the individual contributor s attachment to the project 3) public sector organizations as users of open source 4) the community as articulated by the community manager. I arrive at four conclusions concerning my empirical studies (1-4) and two general conclusions (5-6). 1) Sun Microsystems and OpenOffice.org Groupware volunteers failed in developing necessary and sufficient open code and open dialogue to ensure collaboration thus splitting the Groupware community into volunteers we and the firm them . 2) Instead of separating intrinsic and extrinsic motivations, I find that volunteers unique patterns of motivations are tied to changing objects and personal histories prior and during participation in the OpenOffice.org Lingucomponent project. Rather than seeing volunteers as a unified community, they can be better understood as independent entrepreneurs in search of a collaborative community . The boundaries between work and hobby are blurred and shifting, thus questioning the usefulness of the concept of volunteer . 3) The public sector ICT discourse portrays a dilemma and tension between the freedom to choose, use and develop one s desktop in the spirit of open source on one hand and the striving for better desktop control and maintenance by IT staff and user advocates, on the other. The link between the global OpenOffice.org community and the local end-user practices are weak and mediated by the problematic IT staff-(end)user relationship. 4) Authoring community can be seen as a new hybrid open source community-type of managerial practice. The ambiguous concept of community is a powerful strategic tool for orienting towards multiple real and imaginary audiences as evidenced in the global membership rhetoric. 5) The changing and contradictory discourses of this study show a change in the conceptual system and developer-user relationship of the open development model. This change is characterized as a movement from hacker ethic and bazaar governance to more professionally and strategically regulated community. 6) Community is simultaneously real and imagined, and can be characterized as a runaway community . Discursive-action can be seen as a specific type of online open source engagement. Hierarchies and structures are created through discursive acts. Key words: Open Source Software, open development model, community, motivation, discourse, rhetoric, developer, user, end-user

Characteristics of Dynamic Recrystalization Domain in the Processing Map for Hot-Working of OFHC Coper

The constitutive flow behaviour of OFHC copper under working conditions is studied using hot compression in the temperature range 650 to 900-degrees-C and strain rate range 0.001 to 100 s-1. The variation of the efficiency of power dissipation given by [2m/(m + 1)] (where m is the strain rate sensitivity) with temperature and strain rate is represented in the form of a power dissipation map and interpreted on the basis of the Dynamic Materials Model. The map prominently exhibited a domain centered at 850-degrees-C and 100 s-1 with a peak efficiency of 35 %. On the basis of the correlation of variations of grain size, efficiency of power dissipation and hot workability with temperature, the domain is identified to represent dynamic recrystallization (DRX).

Effect of Zirconium on the Processing MAPS For Hot-Working of Alpha-Beta Brass

The effect of zirconium on the hot working characteristics of alpha and alpha-beta brass was studied in the temperature range of 500 to 850-degrees-C and the strain rate range of 0.001 to 100 s-1. On the basis of the flow stress data, processing maps showing the variation of the efficiency of power dissipation (given by [2m/(m+1)] where m is the strain rate sensitivity) with temperature and strain rate were obtained. The addition of zirconium to alpha brass decreased the maximum efficiency of power dissipation from 53 to 39%, increased the strain rate for dynamic recrystallization (DRX) from 0.001 to 0.1 s-1 and improved the hot workability. Alpha-beta brasses with and without zirconium exhibit a domain in the temperature range from 550 to 750-degrees-C and at strain rates lower than 1 s-1 with a maximum efficiency of power dissipation of nearly 50 % occurring in the temperature range of 700 to 750-degrees-C and a strain rate of 0.001 s-1. In the domain, the alpha phase undergoes DRX and controls the hot deformation of the alloy whereas the beta phase deforms superplastically. The addition of zirconium to alpha-beta brass has not affected the processing maps as it gets partitioned to the beta phase and does not alter the constitutive behavior of the alpha phase

Nonlinear finite element analysis of reinforced concrete corbel

Reinforced concrete corbels have been analysed using the nonlinear finite element method. An elasto-plastic-cracking constitutive formulation using Huber-Hencky-Mises yield surface augmented with a tension cut-off is employed. Smeared-fixed cracking with mesh-dependent strain softening is employed to obtain objective results. Multiple non-orthogonal cracking and opening and closing of cracks are permitted. The model and the formulation are verified with respect to available numerical solution for an RC corbel. Results of analyses of nine reinforced concrete corbels are presented and compared with experimental results. Nonlinear finite element analysis of reinforced concrete structures is shown to be a complement and also a feasible alternative to laboratory testing.

Jouko Turkan Teatterikorkeakoulun kauden yhteiskunnallinen kontekstuaalisuus vuosina 1982 - 1985

The subject of my doctoral thesis is the social contextuality of Finnish theater director, Jouko Turkka's (b. 1942) educational tenure in the Theater Academy of Finland 1982 1985. Jouko Turkka announced in the opening speech of his rectorship in 1982 that Finnish society had undergone a social shift into a new cultural age, and that actors needed new facilities like capacity, flexibility, and ability for renewal in their work. My sociological research reveals that Turkka adapted cultural practices and norms of new capitalism and new liberalism, and built a performance environment for actors' educational work, a real life simulation of a new capitalist workplace. Actors educational praxis became a cultural performance, a media spectacle. Turkka's tenure became the most commented upon and discussed era in Finnish postwar theater history. The sociological method of my thesis is to compare information of sociological research literature about new capitalist work, and Turkka's educational theater work. In regard to the conceptions of legitimation, time, dynamics, knowledge, and social narrative consubstantial changes occurred simultaneously in both contexts of workplace. I adapt systems and chaos theory's concepts and modules when researching how a theatrical performance self-organizes in a complex social space and the space of Information. Ilya Prigogine's chaos theoretic concept, fluctuation, is the central social and aesthetic concept of my thesis. The chaos theoretic conception of the world was reflected in actors' pedagogy and organizational renewals: the state of far from equilibrium was the prerequisite of creativity and progress. I interpret the social and theater's aesthetical fluctuations as the cultural metaphor of new capitalism. I define the wide cultural feedback created by Turkka's tenure of educational praxis, and ideas adapted from the social context into theater education, as an autopoietic communicative process between theater education and society: as a black box, theater converted the virtual conception of the world into a concrete form of an actor's psychophysical praxis. Theater educational praxis performed socially contextual meanings referring to a subject's position in the social change of 1980s Finland. My other theoretic framework lies close to the American performance theory, with its close ties to the social sciences, and to the tradition of rhetoric and communication: theater's rhetorical utility materializes quotidian cultural practices in a theatrical performance, and helps the audience to research social situations and cultural praxis by mirroring them and creating an explanatory frame.

Migration-Development Nexus in the Malawian Health Sector: European Union Blue Card – circular migration for development?

The European Union has agreed on implementing the Policy Coherence for Development (PCD) principle in all policy sectors that are likely to have a direct impact on developing countries. This is in order to take account of and support the EU development cooperation objectives and the achievement of the internationally agreed Millennium Development Goals. The common EU migration policy and the newly introduced EU Blue Card directive present an example of the implementation of the principle in practice: the directive is not only designed to respond to the occurring EU labour demand by attracting highly skilled third-country professionals, but is also intended to contribute to the development objectives of the migrant-sending developing countries, primarily through the tool of circular migration and the consequent skills transfers. My objective in this study is to assess such twofold role of the EU Blue Card and to explore the idea that migration could be harnessed for the benefit of development in conformity with the notion that the two form a positive nexus. Seeing that the EU Blue Card fails to differentiate the most vulnerable countries and sectors from those that are in a better position to take advantage of the global migration flows, the developmental consequences of the directive must be accounted for even in the most severe settings. Accordingly, my intention is to question whether circular migration, as claimed, could address the problem of brain drain in the Malawian health sector, which has witnessed an excessive outflow of its professionals to the UK during the past decade. In order to assess the applicability, likelihood and relevance of circular migration and consequent skills transfers for development in the Malawian context, a field study of a total of 23 interviews with local health professionals was carried out in autumn 2010. The selected approach not only allows me to introduce a developing country perspective to the on-going discussion at the EU level, but also enables me to assess the development dimension of the EU Blue Card and the intended PCD principle through a local lens. Thus these interviews and local viewpoints are at the very heart of this study. Based on my findings from the field, the propensity of the EU Blue Card to result in circular migration and to address the persisting South-North migratory flows as well as the relevance of skills transfers can be called to question. This is as due to the bias in its twofold role the directive overlooks the importance of the sending country circumstances, which are known to determine any developmental outcomes of migration, and assumes that circular migration alone could bring about immediate benefits. Without initial emphasis on local conditions, however, positive outcomes for vulnerable countries such as Malawi are ever more distant. Indeed it seems as if the EU internal interests in migration policy forbid the fulfilment of the PCD principle and diminish the attempt to harness migration for development to bare rhetoric.

Processing map for hot working of as cast magnesium

The constitutive flow behaviour in hot working of as cast magnesium has been studied with the help of a processing map developed in the temperature range 300-550°C and strain rate range 0·001-100 s−1. The map, interpreted using the dynamic materials model, revealed that the material undergoes dynamic recrystallisation at 425°C and 0·3 s−1, which are the optimum parameters for hot working. Ai temperatures higher than 450°C and strain rates lower than about 0·1 s−1, wedge cracking occurs in as cast magnesium. The wedge cracking domain has a high efficiency of power dissipation (60%), whereas the dynamic recrystallisation domain has a value of 34%. At temperatures below 450°C and strain rates above 10 s−1, the material exhibits flow instability in the form of mechanical twinning. At higher temperatures and strain rates, instability is manifested by flow localisation.

Processing maps for hot working of Cu-Ni-Zn alloys. Part I - Alpha-nickel silver

The constitutive behaviour of agr — nickel silver in the temperature range 700–950 °C and strain rate range 0.001–100 s–1 was characterized with the help of a processing map generated on the basis of the principles of the ldquodynamic materials modelrdquo of Prasadet al Using the flow stress data, processing maps showing the variation of the efficiency of power dissipation (given by 2m/(m+1) wherem is the strain-rate sensitivity) with temperature and strain rate were obtained, agr-nickel silver exhibits a single domain at temperatures greater than 750 °C and at strain rates lower than 1s–1, with a maximum efficiency of 38% occurring at about 950 °C and at a strain rate of 0.1 s–1. In the domain the material undergoes dynamic recrystallization (DRX). On the basis of a model, it is shown that the DRX is controlled by the rate of interface formation (nucleation) which depends on the diffusion-controlled process of thermal recovery by climb. At high strain rates (10 and 100s–1) the material undergoes microstructural instabilities, the manifestations of which are in the form of adiabatic shear bands and strain markings.

Processing maps for hot working of Cu-Ni-Zn alloys Part II Alpha-Beta nickel silver

The constitutive behaviour of agr-beta nickel silver in the temperature range 600�850 °C and strainrate range 0.001�100s�1 was characterized with the help of a processing map generated on the principles of the dynamic materials model. On the basis of the flow-stress data, processing maps showing the variation of the efficiency of power dissipation (given by [2m/(m+1)], wherem is the strain-rate sensitivity) with temperature and strain rate were obtained, agr-beta nickel silver exhibits a single domain at temperatures greater than 700 °C and at strain rates lower than 1 s�1 with a maximum efficiency of power dissipation of about 42% occurring at about 850 °C and at 0.1 s�1. In the domain, the agr phase undergoes dynamic recrystallization and controls the deformation of the alloy, while the beta phase deforms superplastically. Optimum conditions for the processing of agr-beta nickel silver are 850 °C and 0.1 s�1. The material undergoes unstable flow at strain rates of 10 and 100 s�1 and in the temperature range 600�750 °C, manifestated in the form of adiabatic shear bands.

Influence of crack tip constraint on void growth in ductile FCC single crystals

Effect of constraint (stress triaxiality) on void growth near a notch tip in a FCC single crystal is investigated. Finite element simulations within the modified boundary layer framework are conducted using crystal plasticity constitutive equations and neglecting elastic anisotropy. Displacement boundary conditions based on model, elastic, two term K-T field are applied on the outer boundary of a large circular domain. A pre-nucleated void is considered ahead of a stationary notch tip. The interaction between the notch tip and the void is studied under different constraints (T-stress levels) and crystal orientations. It is found that negative T-stress retards the mechanisms of ductile fracture. However, the extent of retardation depends on the crystal orientation. Further, it is found that there exists a particular orientation which delays the ductile fracture processes and hence can potentially improve ductility. This optimal orientation depends on the constraint level. (C) 2010 Published by Elsevier B.V.

A numerical investigation of ductile fracture initiation in a high-strength low-alloy steel

In this work, static and drop-weight impact experiments, which have been conducted using three-point bend fracture specimens of a high-strength low-alloy steel, are analysed by performing finite-element simulations. The Gurson constitutive model that accounts for the ductile failure mechanisms of microvoid nucleation, growth and is employed within the framework of a finite deformation plasticity theory. Two populations of second-phase particles are considered, including large inclusions which initiate voids at an early stage and small particles which require large strains to nucleate voids. The most important objective of the work is to assess quantitatively the effects of material inertia, strain rate sensitivity and local adiabatic temperature rise (due to conversion of plastic work into heat) on dynamic ductile crack initiation. This is accomplished by comparing the evolution histories of void volume fraction near the notch tip in the static analysis with the dynamic analyses. The results indicate that increased strain hardening caused by strain rate sensitivity, which becomes important under dynamic loading, plays a benign role in considerably slowing down the void growth rate near the notch tip. This is partially opposed by thermal softening caused by adiabatic heating near the notch tip.