Electrochemical biosensor based on biomimetic material for myoglobin detection

A novel reusable molecularly imprinted polymer (MIP) assembled on a polymeric layer of carboxylated poly(vinyl chloride) (PVCsingle bondCOOH) for myoglobin (Myo) detection was developed. This polymer was casted on the gold working area of a screen printed electrode (Au-SPE), creating a novel disposable device relying on plastic antibodies. Electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV) and Fourier transform infrared spectroscopy (FTIR) studies confirmed the surface modification. The MIP/Au-SPE devices displayed a linear behaviour in EIS from 0.852 to 4.26 μg mL−1, of positive slope 6.50 ± 1.48 (kΩ mL μg−1). The limit of detection was 2.25 μg mL−1. Square wave voltammetric (SWV) assays were made in parallel and showed linear responses between 1.1 and 2.98 μg mL−1. A current decrease was observed against Myo concentration, producing average slopes of −0.28 ± 0.038 μA mL μg−1. MIP/Au-SPE also showed good results in terms of selectivity. The error% found for each interfering species were 7% for troponin T (TnT), 11% for bovine serum albumin (BSA) and 2% for creatine kinase MB (CKMB), respectively. Overall, the technical modification over the Au-SPE was found a suitable approach for screening Myo in biological fluids.

Smart Plastic Antibody Material (SPAM) tailored on disposable screen printed electrodes for protein recognition: application to Myoglobin detection

This work introduces two major changes to the conventional protocol for designing plastic antibodies: (i) the imprinted sites were created with charged monomers while the surrounding environment was tailored using neutral material; and (ii) the protein was removed from its imprinted site by means of a protease, aiming at preserving the polymeric network of the plastic antibody. To our knowledge, these approaches were never presented before and the resulting material was named here as smart plastic antibody material (SPAM). As proof of concept, SPAM was tailored on top of disposable gold-screen printed electrodes (Au-SPE), following a bottom-up approach, for targeting myoglobin (Myo) in a point-of-care context. The existence of imprinted sites was checked by comparing a SPAM modified surface to a negative control, consisting of similar material where the template was omitted from the procedure and called non-imprinted materials (NIMs). All stages of the creation of the SPAM and NIM on the Au layer were followed by both electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). AFM imaging was also performed to characterize the topography of the surface. There are two major reasons supporting the fact that plastic antibodies were effectively designed by the above approach: (i) they were visualized for the first time by AFM, being present only in the SPAM network; and (ii) only the SPAM material was able to rebind to the target protein and produce a linear electrical response against EIS and square wave voltammetry (SWV) assays, with NIMs showing a similar-to-random behavior. The SPAM/Au-SPE devices displayed linear responses to Myo in EIS and SWV assays down to 3.5 μg/mL and 0.58 μg/mL, respectively, with detection limits of 1.5 and 0.28 μg/mL. SPAM materials also showed negligible interference from troponin T (TnT), bovine serum albumin (BSA) and urea under SWV assays, showing promising results for point-of-care applications when applied to spiked biological fluids.

Smart Plastic Antibody Material for Hemoglobin Tailored by Silica Surface Imprinting and with Charged Binding Sites: Its use as Ionophore in Potentiometric Transduction

JORNADAS DE ELECTROQUÍMICA E INOVAÇÃO 2013

Abrigos com pinturas rupestres de Trás-os-Montes e Alto Douro (Pala Pinta, Penas Róias e Cachão da Rapa). Paisagens, signos e cultura material

Dissertação apresentada para cumprimento dos requisitos necessários à obtenção do grau de Mestre em Arqueologia

Convento de Santana de Leiria: história, vivências e cultura material

Dissertação apresentada para cumprimento dos requisitos necessários à obtenção do grau de Mestre em Arqueologia

O Mobiliário do Antigo Egipto no Império Novo. Análise Material e Simbólica

A presente dissertação reflecte a compilação de um estudo essencialmente bibliográfico e iconográfico de doze peças de mobiliário do antigo Egipto, Império Novo. É primeiramente apresentado um breve estudo sobre materiais usados para a construção dos diversos objectos produzidos no referido período histórico e analisados os seus aspectos simbólicos. São também apresentadas sucintamente algumas técnicas de construção adoptadas durante as dinastias XVIII-XX para a construção de mobiliário doméstico e ritual. De seguida estes objectos são analisados material e simbolicamente em dois capítulos tendo como base a investigação efectuada. Colocam-se ao longo deste trabalho diversas questões, sendo as mais prementes “se terá havido transferência de mobiliário doméstico para o contexto funerário” e “Terão tido os espólios funerários mobiliário feito exclusivamente para esse fim”. As conclusões revelam dados comparativos do universo de peças de mobiliário recolhidas e apresentam algumas hipóteses explicativas sobre o assunto abordado.

Al-doped ZnO ceramic sputtering targets based on nanocrystalline powders produced by emulsion detonation synthesis – deposition and application as a transparent conductive oxide material

Transparent conducting oxides (TCOs) have been largely used in the optoelectronic industry due to their singular combination of low electrical resistivity and high optical transmittance. They are usually deposited by magnetron sputtering systems being applied in several devices, specifically thin film solar cells (TFSCs). Sputtering targets are crucial components of the sputtering process, with many of the sputtered films properties dependent on the targets characteristics. The present thesis focuses on the development of high quality conductive Al-doped ZnO (AZO) ceramic sputtering targets based on nanostructured powders produced by emulsion detonation synthesis method (EDSM), and their application as a TCO. In this sense, the influence of several processing parameters was investigated from the targets raw-materials synthesis to the application of sputtered films in optoelectronic devices. The optimized manufactured AZO targets present a final density above 99 % with controlled grain size, an homogeneous microstructure with a well dispersed ZnAl2O4 spinel phase, and electrical resistivities of ~4 × 10-4 Ωcm independently on the Al-doping level among 0.5 and 2.0 wt. % Al2O3. Sintering conditions proved to have a great influence on the properties of the targets and their performance as a sputtering target. It was demonstrated that both deposition process and final properties of the films are related with the targets characteristics, which in turn depends on the initial powder properties. In parallel, the influence of several deposition parameters in the film´s properties sputtered from these targets was investigated. The sputtered AZO TCOs showed electrical properties at room temperature that are superior to simple oxides and comparable to a reference TCO – indium tin oxide (ITO), namely low electrical resistivity of 5.45 × 10-4 Ωcm, high carrier mobility (29.4 cm2V-1s-1), and high charge carrier concentration (3.97 × 1020 cm-3), and also average transmittance in the visible region > 80 %. These superior properties allowed their successful application in different optoelectronic devices.

O âmbito de aplicação material da legislação de proteção de dados pessoais e o tratamento de imagem por pessoa singular

Images have gained a never before seen importance. Technological changes have given the Information Society extraordinary means to capture, treat and transmit images, wheter your own or those of others, with or without a commercial purpose, with no boundaries of time or country, without “any kind of eraser”. From the several different ways natural persons may engage in image processing with no commercial purpose, the cases of sharing pictures through social networks and video surveillance assume particular relevance. Consequently there are growing legitimate concerns with the protection of one's image, since its processing may sometimes generate situations of privacy invasion or put at risk other fundamental rights. With this in mind, the present thesis arises from the question: what are the existent legal instruments in Portuguese Law that enable citizens to protect themselves from the abusive usage of their own pictures, whether because that image have been captured by a smartphone or some video surveillance camera, whether because it was massively shared through a blog or some social network? There is no question the one's right to not having his or her image used in an abusive way is protected by the Portuguese constitution, through the article 26th CRP, as well as personally right, under the article 79th of the Civil Code, and finally through criminal law, articles 192nd and 193rd of the Criminal Code. The question arises in the personal data protection context, considering that one's picture, given certain conditions, is personal data. Both the Directive 95/46/CE dated from 1995 as well as the LPD from 1998 are applicable to the processing of personal data, but both exclude situations of natural persons doing so in the pursuit of activities strictly personal or family-related. These laws demand complex procedures to natural persons, such as the preemptive formal authorisation request to the Data Protection National Commission. Failing to do so a natural person may result in the application of fines as high as €2.500,00 or even criminal charges. Consequently, the present thesis aims to study if the image processing with no commercial purposes by a natural person in the context of social networks or through video surveillance belongs to the domain of the existent personal data protection law. To that effect, it was made general considerations regarding the concept of video surveillance, what is its regimen, in a way that it may be distinguishable from Steve Mann's definition of sousveillance, and what are the associated obligations in order to better understand the concept's essence. The application of the existent laws on personal data protection to images processing by natural persons has been analysed taking into account the Directive 95/46/CE, the LPD and the General Regulation. From this analysis it is concluded that the regimen from 1995 to 1998 is out of touch with reality creating an absence of legal shielding in the personal data protection law, a flaw that doesn't exist because compensated by the right to image as a right to personality, that anyway reveals the inability of the Portuguese legislator to face the new technological challenges. It is urgent to legislate. A contrary interpretation will evidence the unconstitutionality of several rules on the LPD due to the obligations natural persons are bound to that violate the right to the freedom of speech and information, which would be inadequate and disproportionate. Considering the recently approved General Regulation and in the case it becomes the final version, the use for natural person of video surveillance of private spaces, Google Glass (in public and private places) and other similar gadgets used to recreational purposes, as well as social networks are subject to its regulation only if the images are shared without limits or existing commercial purposes. Video surveillance of public spaces in all situations is subject to General Regulation provisions.

Sources to study Antiquity: Between texts and material culture. Abstract Book

FCT

Material estadístico sobre la industria peruana de harina de pescado

Cuadros estadísticos de aspectos cualitativos y cuantitativos ligados a la industria peruana de reducción, que se presenta desde el momento de la pesca de materia prima hasta la venta del producto final y su exportación.

Resolución N° 134 ¿Cuál es el control de legalidad de la Cámara de Comercio de Bogotá frente a las actas sobre las cuales se alega falsedad ideológica o material? - la denominación del acta no determina la naturaleza de la reunión

Servicios registrales

Resolución N° 18 ¿En que consiste la presunción de autenticidad en materia de actas contentivas de decisiones sociales? ¿Es la Cámara de Comercio competente para evaluar la validez material de un acta presentada para registro?

Servicios registrales

Resolución N° 113 ¿Cuál es el alcance del control de legalidad de las cámaras de comercio respecto de los nombramientos? ¿Qué naturaleza tiene dicho control- es formal o material? ¿Es competente la Cámara respecto del control sobre presuntas falsedades del documento presentado para registro?

Servicios registrales

Resolución N° 05 ¿Puede la cámara de comercio pronunciarse respecto del contenido de un acta cuando se alega falsedad material e ideológica de la misma? ¿Cuáles son los elementos sobre los cuales la cámara de comercio puede pronunciarse cuando evalúa un acta?

Servicios registrales

Material 2 - Vasos en línea

Desarrollo empresarial y creación de empresa