Rethinking Early Childhood Education and Care: Implications for Research and Evaluation

Research in disadvantaged populations demonstrates that the effect of Early Childhood Education and Care (ECEC) programs can reach into adulthood and influence a wide range of achievement and social well-being outcomes. In English-speaking developed economies, these findings have sparked new perceptions of the role ECEC programs play in both the public and private sphere. Programs that achieve improved learning and social well-being for children are seen as an investment for both individuals and society. Yet, the empirical understanding of what programs best deliver positive outcomes across the diversity of social contexts is limited. A key research task is to identify the forms of ECEC that are most effective in delivering enduring and broad positive outcomes for all children. This article explores changing policy conceptualizations of ECEC, the outcome goals of ECEC, and directions for research in identifying quality in ECEC programs.

Evaluation of the efficacy and economics of irrigation management, plant resistance and Brassica(spot)(TM) models for management of white blister on Brassica crops

Options for the integrated management of white blister (caused by Albugo candida) of Brassica crops include the use of well timed overhead irrigation, resistant cultivars, programs of weekly fungicide sprays or strategic fungicide applications based on the disease risk prediction model, Brassica(spot)(TM). Initial systematic surveys of radish producers near Melbourne, Victoria, indicated that crops irrigated overhead in the morning (0800-1200 h) had a lower incidence of white blister than those irrigated overhead in the evening (2000-2400 h). A field trial was conducted from July to November 2008 on a broccoli crop located west of Melbourne to determine the efficacy and economics of different practices used for white blister control, modifying irrigation timing, growing a resistant cultivar and timing spray applications based on Brassica(spot)(TM). Growing the resistant cultivar, 'Tyson', instead of the susceptible cultivar, 'Ironman', reduced disease incidence on broccoli heads by 99 %. Overhead irrigation at 0400 h instead of 2000 h reduced disease incidence by 58 %. A weekly spray program or a spray regime based on either of two versions of the Brassica(spot)(TM) model provided similar disease control and reduced disease incidence by 72 to 83 %. However, use of the Brassica(spot)(TM) models greatly reduced the number of sprays required for control from 14 to one or two. An economic analysis showed that growing the more resistant cultivar increased farm profit per ha by 12 %, choosing morning irrigation by 3 % and using the disease risk predictive models compared with weekly sprays by 15 %. The disease risk predictive models were 4 % more profitable than the unsprayed control.

F-18 Labelling Synthesis, Radioanalysis and Evaluation of A Dopamine Transporter and A Hypoxia Tracer

Positron emission tomography (PET) is an imaging technique in which radioactive positron-emitting tracers are used to study biochemical and physiological functions in humans and in animal experiments. The use of PET imaging has increased rapidly in recent years, as have special requirements in the fields of neurology and oncology for the development of syntheses for new, more specific and selective radiotracers. Synthesis development and automation are necessary when high amounts of radioactivity are needed for multiple PET studies. In addition, preclinical studies using experimental animal models are necessary for evaluating the suitability of new PET tracers for humans. For purification and analysing the labelled end-product, an effective radioanalytical method combined with an optimal radioactivity detection technique is of great importance. In this study, a fluorine-18 labelling synthesis method for two tracers was developed and optimized, and the usefulness of these tracers for possible prospective human studies was evaluated. N-(3-[18F]fluoropropyl)-2β-carbomethoxy-3β-(4-fluorophenyl)nortropane ([18F]β-CFT-FP) is a candidate PET tracer for the dopamine transporter (DAT), and 1H-1-(3-[18F]fluoro-2-hydroxypropyl)-2-nitroimidazole ([18F]FMISO) is a well-known hypoxia marker for hypoxic but viable cells in tumours. The methodological aim of this thesis was to evaluate the status of thin-layer chromatography (TLC) combined with proper radioactivity detection measurement systems as a radioanalytical method. Three different detection methods of radioactivity were compared: radioactivity scanning, film autoradiography, and digital photostimulated luminescence (PSL) autoradiography. The fluorine-18 labelling synthesis for [18F]β-CFT-FP was developed and carbon-11 labelled [11C]β-CFT-FP was used to study the specificity of β-CFT-FP for the DAT sites in human post-mortem brain slices. These in vitro studies showed that β-CFT-FP binds to the caudate-putamen, an area rich of DAT. The synthesis of fluorine-18 labelled [18F]FMISO was optimized, and the tracer was prepared using an automated system with good and reproducible yields. In preclinical studies, the action of the radiation sensitizer estramustine phosphate on the radiation treatment and uptake of [18F]FMISO was evaluated, with results of great importance for later human studies. The methodological part of this thesis showed that radioTLC is the method of choice when combined with an appropriate radioactivity detection technique. Digital PSL autoradiography proved to be the most appropriate when compared to the radioactivity scanning and film autoradiography methods. The very high sensitivity, good resolution, and wide dynamic range of digital PSL autoradiography are its advantages in detection of β-emitting radiolabelled substances.

Evaluation of restoration of vegetation infested with cat's claw creeper vine (Dolichandra unguis-cati): soil seed bank response to herbicide and physical removal

Cat’s claw creeper vine, Dolichandra unguis-cati (L.) L.G.Lohmann (formerly known as Macfadyena unguis-cati (L.) A.H.Gentry), a Weed of National Significance (WoNS), is a structural woody parasite that is highly invasive along sensitive riparian corridors and native forests of coastal and inland eastern Australia. As part of evaluation of the impact of herbicide and mechanical/physical control techniques on the long-term reduction of biomass of the weed and expected return of native flora, we have set-up permanent vegetation plots in: (a) infested and now chemically/physically treated, (b) infested but untreated and (c) un-infested patches. The treatments were set up in both riparian and non-riparian habitats to document changes that occur in seed bank flora over a two-year post-treatment period. Response to treatment varied spatially and temporally. However, following chemical and physical removal treatments, treated patches exhibited lower seed bank abundance and diversity than infested and patches lacking the weed, but differences were not statistically significant. Thus it will be safe to say that spraying herbicides using the recommended rate does not undermine restoration efforts.

Does lethal control of top-predators release mesopredators? A re-evaluation of three Australian case studies

Top-predators can sometimes be important for structuring fauna assemblages in terrestrial ecosystems. Through a complex trophic cascade, the lethal control of top-predators has been predicted to elicit positive population responses from mesopredators that may in turn increase predation pressure on prey species of concern. In support of this hypothesis, many relevant research papers, opinion pieces and literature reviews identify three particular case studies as supporting evidence for top-predator control-induced release of mesopredators in Australia. However, many fundamental details essential for supporting this hypothesis are missing from these case studies, which were each designed to investigate alternative aims. Here, we re-evaluate the strength of evidence for top-predator control-induced mesopredator release from these three studies after comprehensive analyses of associated unpublished correlative and experimental data. Circumstantial evidence alluded to mesopredator releases of either the European Red Fox (Vulpes vulpes) or feral Cat (Felis catus) coinciding with Dingo (Canis lupus dingo) control in each case. Importantly, however, substantial limitations in predator population sampling techniques and/or experimental designs preclude strong assertions about the effect of lethal control on mesopredator populations from these studies. In all cases, multiple confounding factors and plausible alternative explanations for observed changes in predator populations exist. In accord with several critical reviews and a growing body of demonstrated experimental evidence on the subject, we conclude that there is an absence of reliable evidence for top-predator control-induced mesopredator release from these three case studies. Well-designed and executed studies are critical for investigating potential top-predator control-induced mesopredator release.

Optimisation of resin extraction from an Australian arid grass ‘Triodia pungens’ and its preliminary evaluation as an anti-termite timber coating

Spinifex grasses are the dominant vegetative component in Australian grassland habitats, covering approximately 26% of the Australian landmass. Our ongoing work explores the utility of both the cellulosic and resinous components of this abundant biomass for modern applications and a potential economy for our Aboriginal collaborators. This study is focused on the optimisation of a resin extraction process using solvent, and the subsequent evaluation, via a field trial, of the potential use and efficacy of the resin as an anti-termite coating material. Termiticidal performance was evaluated by re-dissolving the extracted resin in acetone and coating on pine timber blocks. The resin-coated and control blocks were then exposed to a colony of Mastotermes darwiniensis’ (Froggatt) termites, which are the most primitive alive and destructive species in subterranean area, at a trial site in northeast Australia, for six months. The results clearly showed that spinifex resin effectively protected the timber from termite attack, while the uncoated control samples were extensively damaged. By demonstrating an enhanced termite resistance, we here report that plant resins that are produced by arid/semi-arid grasses could be potentially used as treatments to prevent termite attack.

Educators’ perspectives about how older hospital patients can engage in a falls prevention education programme: A qualitative process evaluation

- Objectives Falls are the most frequent adverse event reported in hospitals. Patient and staff education delivered by trained educators significantly reduced falls and injurious falls in an older rehabilitation population. The purpose of the study was to explore the educators’ perspectives of delivering the education and to conceptualise how the programme worked to prevent falls among older patients who received the education. - Design A qualitative exploratory study. - Methods Data were gathered from three sources: conducting a focus group and an interview (n=10 educators), written educator notes and reflective researcher field notes based on interactions with the educators during the primary study. The educators delivered the programme on eight rehabilitation wards for periods of between 10 and 40 weeks. They provided older patients with individualised education to engage in falls prevention and provided staff with education to support patient actions. Data were thematically analysed and presented using a conceptual framework. - Results Falls prevention education led to mutual understanding between staff and patients which assisted patients to engage in falls prevention behaviours. Mutual understanding was derived from the following observations: the educators perceived that they could facilitate an effective three-way interaction between staff actions, patient actions and the ward environment which led to behaviour change on the wards. This included engaging with staff and patients, and assisting them to reconcile differing perspectives about falls prevention behaviours. - Conclusions Individualised falls prevention education effectively provides patients who receive it with the capability and motivation to develop and undertake behavioural strategies that reduce their falls, if supported by staff and the ward environment.

Development, reliability and validity of the queensland evaluation of wheelchair skills (QEWS)

- Objectives To develop and test a valid and reliable assessment of wheelchair skills for individuals with spinal cord injuries (SCI); the Queensland Evaluation of Wheelchair Skills (QEWS). - Setting Hospital, Australia. - Methods Phase 1: Four Delphi panel rounds with clinical experts were used to develop the QEWS. Phase 2: Intra-rater and inter-rater reliability of the QEWS items were examined in 100 people with SCI. Phase 3a: Concurrent validity was investigated by examining the association between QEWS total scores and physiotherapists’ global ratings of wheelchair skill performance. Phase 3b: Construct validity was tested in 20 people with recent SCI by examining change in QEWS total scores between when they first mobilised in a wheelchair and scores obtained 10 weeks later. - Results Phase 1: The QEWS was developed. Phase 2: The intra-class correlation coefficients reflecting the intra-rater reliability and the inter-rater reliability for the QEWS total score were 1.00 and 0.98, with scores being within one point of each other 96 and 91% of the time, respectively. Phase 3a: The QEWS total scores were comparable with the global rating of wheelchair skill performance (r2=0.93). Phase 3b: The QEWS scores changed by a median (interquartile range (IQR)) of 4 (1 to 6) points over the 10-week period following first wheelchair mobilisation. - Conclusion The QEWS is a valid and reliable tool for measuring wheelchair skills in individuals with SCI. The QEWS is efficient and practical to administer and does not require specialised equipment.

Information preferences for the evaluation of coastal development impacts on ecosystem services: A multi-criteria assessment in the Australian context

Ecosystem based management requires the integration of various types of assessment indicators. Understanding stakeholders' information preferences is important, in selecting those indicators that best support management and policy. Both the preferences of decision-makers and the general public may matter, in democratic participatory management institutions. This paper presents a multi-criteria analysis aimed at quantifying the relative importance to these groups of economic, ecological and socio-economic indicators usually considered when managing ecosystem services in a coastal development context. The Analytic Hierarchy Process (AHP) is applied within two nationwide surveys in Australia, and preferences of both the general public and decision-makers for these indicators are elicited and compared. Results show that, on average across both groups, the priority in assessing a generic coastal development project is for the ecological assessment of its impacts on marine biodiversity. Ecological assessment indicators are globally preferred to both economic and socio-economic indicators regardless of the nature of the impacts studied. These results are observed for a significantly larger proportion of decision-maker than general public respondents, questioning the extent to which the general public's preferences are well reflected in decision-making processes.

Evaluation of a workplace alcohol and other drug policy

BACKGROUND The current impetus for developing alcohol and/or other drugs (AODs) workplace policies in Australia is to reduce workplace AOD impairment, improve safety, and prevent AOD-related injury in the workplace. For these policies to be effective, they need to be informed by scientific evidence. Evidence to inform the development and implementation of effective workplace AOD policies is currently lacking. There does not currently appear to be conclusive evidence for the effectiveness of workplace AOD policies in reducing impairment and preventing AOD-related injury. There is also no apparent evidence regarding which factors facilitate or impede the success of an AOD policy, or whether, for example, unsuccessful policy outcomes were due to poor policy or merely poor implementation of the policy. It was the aim of this research to undertake a process, impact, and outcome evaluation of a workplace AOD policy, and to contribute to the body of knowledge on the development and implementation of effective workplace AOD policies. METHODS The research setting was a state-based power-generating industry in Australia between May 2008 and May 2010. Participants for the process evaluation study were individuals who were integral to either the development or the implementation of the workplace AOD policy, or both of these processes (key informants), and comprised the majority of individuals who were involved in the process of developing and/or implementing the workplace AOD policy. The sample represented the two main groups of interest—management and union delegates/employee representatives—from all three of the participating organisations. For the impact and outcome evaluation studies, the population included all employees from the three participating organisations, and participants were all employees who consented to participate in the study and who completed both the pre-and post-policy implementation questionnaires. Qualitative methods in the form of interviews with key stakeholders were used to evaluate the process of developing and implementing the workplace AOD policy. In order to evaluate the impact of the policy with regard to the risk factors for workplace AOD impairment, and the outcome of the policy in terms of reducing workplace AOD impairment, quantitative methods in the form of a non-randomised single group pre- and post-test design were used. Changes from Time 1 (pre) to Time 2 (post) in the risk factors for workplace AOD impairment, and changes in the behaviour of interest—(self-reported) workplace AOD impairment—were measured. An integration of the findings from the process, impact, and outcome evaluation studies was undertaken using a combination of qualitative and quantitative methods. RESULTS For the process evaluation study Study respondents indicated that their policy was developed in the context of comparable industries across Australia developing workplace AOD policies, and that this was mainly out of concern for the deleterious health and safety impacts of workplace AOD impairment. Results from the process evaluation study also indicated that in developing and implementing the workplace AOD policy, there were mainly ‗winners', in terms of health and safety in the workplace. While there were some components of the development and implementation of the policy that were better done than others, and the process was expensive and took a long time, there were, overall, few unanticipated consequences to implementing the policy and it was reported to be thorough and of a high standard. Findings also indicated that overall the policy was developed and implemented according to best-practice in that: consultation during the policy development phase (with all the main stakeholders) was extensive; the policy was comprehensive; there was universal application of the policy to all employees; changes in the workplace (with regard to the policy) were gradual; and, the policy was publicised appropriately. Furthermore, study participants' responses indicated that the role of an independent external expert, who was trusted by all stakeholders, was integral to the success of the policy. For the impact and outcome evaluation studies Notwithstanding the limitations of pre- and post-test study designs with regard to attributing cause to the intervention, the findings from the impact evaluation study indicated that following policy implementation, statistically significant positive changes with regard to workplace AOD impairment were recorded for the following variables (risk factors for workplace AOD impairment): Knowledge; Attitudes; Perceived Behavioural Control; Perceptions of the Certainty of being punished for coming to work impaired by AODs; Perceptions of the Swiftness of punishment for coming to work impaired by AODs; and Direct and Indirect Experience with Punishment Avoidance for workplace AOD impairment. There were, however, no statistically significant positive changes following policy implementation for Behavioural Intentions, Subjective Norms, and Perceptions of the Severity of punishment for workplace AOD impairment. With regard to the outcome evaluation, there was a statistically significant reduction in self-reported workplace AOD impairment following the implementation of the policy. As with the impact evaluation, these findings need to be interpreted in light of the limitations of the study design in being able to attribute cause to the intervention alone. The findings from the outcome evaluation study also showed that while a positive change in self-reported workplace AOD impairment following implementation of the policy did not appear to be related to gender, age group, or employment type, it did appear to be related to levels of employee general alcohol use, cannabis use, site type, and employment role. Integration of the process, impact, and outcome evaluation studies There appeared to be qualitative support for the relationship between the process of developing and implementing the policy, and the impact of the policy in changing the risk factors for workplace AOD impairment. That is, overall the workplace AOD policy was developed and implemented well and, following its implementation, there were positive changes in the majority of measured risk factors for workplace AOD impairment. Quantitative findings lend further support for a relationship between the process and impact of the policy, in that there was a statistically significant association between employee perceived fidelity of the policy (related to the process of the policy) and positive changes in some risk factors for workplace AOD impairment (representing the impact of the policy). Findings also indicated support for the relationship between the impact of the policy in changing the risk factors for workplace AOD impairment and the outcome of the policy in reducing workplace AOD impairment: positive changes in the risk factors for workplace AOD impairment (impact) were related to positive changes in self reported workplace AOD impairment (representing the main goal and outcome of the policy). CONCLUSIONS The findings from the research indicate support for the conclusion that the policy was appropriately implemented and that it achieved its objectives and main goal. The Doctoral research findings also addressed a number of gaps in the literature on workplace AOD impairment, namely: the likely effectiveness of AOD policies for reducing AOD impairment in the workplace, which factors in the development and implementation of a workplace AOD policy are likely to facilitate or impede the effectiveness of the policy to reduce workplace AOD impairment, and which employee groups are less likely to respond well to policies of this type. The findings from this research not only represent an example of translational, applied research—through the evaluation of the study industry's policy—but also add to the body of knowledge on workplace AOD policies and provide policy-makers with evidence which may be useful in the development and implementation of effective workplace AOD policies. Importantly, the findings espouse the importance of scientific evidence in the development, implementation, and evaluation of workplace AOD policies.

Digital elevation model error in terrain analysis

Digital elevation models (DEMs) have been an important topic in geography and surveying sciences for decades due to their geomorphological importance as the reference surface for gravita-tion-driven material flow, as well as the wide range of uses and applications. When DEM is used in terrain analysis, for example in automatic drainage basin delineation, errors of the model collect in the analysis results. Investigation of this phenomenon is known as error propagation analysis, which has a direct influence on the decision-making process based on interpretations and applications of terrain analysis. Additionally, it may have an indirect influence on data acquisition and the DEM generation. The focus of the thesis was on the fine toposcale DEMs, which are typically represented in a 5-50m grid and used in the application scale 1:10 000-1:50 000. The thesis presents a three-step framework for investigating error propagation in DEM-based terrain analysis. The framework includes methods for visualising the morphological gross errors of DEMs, exploring the statistical and spatial characteristics of the DEM error, making analytical and simulation-based error propagation analysis and interpreting the error propagation analysis results. The DEM error model was built using geostatistical methods. The results show that appropriate and exhaustive reporting of various aspects of fine toposcale DEM error is a complex task. This is due to the high number of outliers in the error distribution and morphological gross errors, which are detectable with presented visualisation methods. In ad-dition, the use of global characterisation of DEM error is a gross generalisation of reality due to the small extent of the areas in which the decision of stationarity is not violated. This was shown using exhaustive high-quality reference DEM based on airborne laser scanning and local semivariogram analysis. The error propagation analysis revealed that, as expected, an increase in the DEM vertical error will increase the error in surface derivatives. However, contrary to expectations, the spatial au-tocorrelation of the model appears to have varying effects on the error propagation analysis depend-ing on the application. The use of a spatially uncorrelated DEM error model has been considered as a 'worst-case scenario', but this opinion is now challenged because none of the DEM derivatives investigated in the study had maximum variation with spatially uncorrelated random error. Sig-nificant performance improvement was achieved in simulation-based error propagation analysis by applying process convolution in generating realisations of the DEM error model. In addition, typology of uncertainty in drainage basin delineations is presented.

Environmental factors affecting the occurrence of periglacial landforms in Finnish Lapland: a numerical approach

Determination of the environmental factors controlling earth surface processes and landform patterns is one of the central themes in physical geography. However, the identification of the main drivers of the geomorphological phenomena is often challenging. Novel spatial analysis and modelling methods could provide new insights into the process-environment relationships. The objective of this research was to map and quantitatively analyse the occurrence of cryogenic phenomena in subarctic Finland. More precisely, utilising a grid-based approach the distribution and abundance of periglacial landforms were modelled to identify important landscape scale environmental factors. The study was performed using a comprehensive empirical data set of periglacial landforms from an area of 600 km2 at a 25-ha resolution. The utilised statistical methods were generalized linear modelling (GLM) and hierarchical partitioning (HP). GLMs were used to produce distribution and abundance models and HP to reveal independently the most likely causal variables. The GLM models were assessed utilising statistical evaluation measures, prediction maps, field observations and the results of HP analyses. A total of 40 different landform types and subtypes were identified. Topographical, soil property and vegetation variables were the primary correlates for the occurrence and cover of active periglacial landforms on the landscape scale. In the model evaluation, most of the GLMs were shown to be robust although the explanation power, prediction ability as well as the selected explanatory variables varied between the models. The great potential of the combination of a spatial grid system, terrain data and novel statistical techniques to map the occurrence of periglacial landforms was demonstrated in this study. GLM proved to be a useful modelling framework for testing the shapes of the response functions and significances of the environmental variables and the HP method helped to make better deductions of the important factors of earth surface processes. Hence, the numerical approach presented in this study can be a useful addition to the current range of techniques available to researchers to map and monitor different geographical phenomena.

Archaean crustal evolution in eastern Finland : New geochronological and geochemical constraints from the Kuhmo terrain and the Nurmes belt

This thesis summarises the results of four original papers concerning U-Pb geochronology and geochemical evolution of Archaean rocks from the Kuhmo terrain and the Nurmes belt, eastern Finland. The study area belongs to a typical Archaean granite-greenstone terrain, composed of metavolcanic and metasedimentary rocks in generally N-S trending greenstone belts as well as a granitoid-gneiss complex with intervening gneissic and migmatised supracrustal and plutonic rocks. U-Pb data on migmatite mesosomes indicate that the crust surrounding the Tipasjärvi-Kuhmo-Suomussalmi greenstone belt is of varying age. The oldest protolith detected for a migmatite mesosome from the granitoid-gneiss complex is 2.94 Ga, whereas the other dated migmatites protoliths have ages of 2.84 2.79 Ga. The latter protoliths are syngenetic with the majority of volcanic rocks in the adjacent Tipasjärvi-Kuhmo-Suomussalmi greenstone belt. This suggests that the genesis of some of the volcanic rocks within the greenstone belt and surrounding migmatite protoliths could be linked. Metamorphic zircon overgrowths with ages of 2.84 2.81 Ga were also obtained. The non-migmatised plutonic rocks in the Kuhmo terrain and in the Nurmes belt record secular geochemical evolution, typical of Archaean cratons. The studied tonalitic rocks have ages of 2.83 2.75 Ga and they have geochemical characteristics similar to low-Al and high-Al TTD (tonalite-trondhjemite-dacite). The granodiorites, diorites, and gabbros with high Mg/Fe and LILE-enriched characteristics were mostly emplaced between 2.74 2.70 Ga and they exhibit geochemical characteristics typical of Archaean sanukitoid suites. The latest identified plutonic episode took place at 2.70 2.68 Ga, when compositionally heterogeneous leucocratic granitoid rocks, with a variable crustal component, were emplaced. U-Pb data on migmatite leucosomes suggest that leucosome generation may have been coeval with this latest plutonic event. On the basis of available U-Pb and Sm-Nd isotopic data it appears that the plutonic rocks of the Kuhmo terrain and the Nurmes belt do not contain any significant input from Palaeoarchaean sources. A characteristic feature of the Nurmes belt is the presence of migmatised paragneisses, locally preserving primary edimentary structures, with sporadic amphibolite intercalations. U-Pb studies on zircons indicate that the precursors of the Nurmes paragneisses were graywackes that were deposited between 2.71 Ga and 2.69 Ga and that they had a prominent 2.75 2.70 Ga source. Nd isotopic and whole-rock geochemical data for the intercalated amphibolites imply MORB sources. U-Pb data on zircons from the plutonic rocks and paragneisses reveal that metamorphic zircon growth took place at 2.72 2.63 Ga. This was the last tectonothermal event related to cratonisation of the Archaean crust of eastern Finland.

Field and laboratory evaluation of fungicides for the control of Phytophthora fruit rot of papaya in far north Queensland, Australia

Results from the first of two artificially inoculated field experiments showed foliar applications of copper hydroxide (Blue Shield Copper) at 600 g a.i./100 L−1 (0% infected fruit), copper hydroxide + metalaxyl-M (Ridomil Gold Plus.) at 877.5 g a.i./100 L−1 (0.27%), metiram + pyraclostrobin (Aero) at 720 g a.i./100 L−1 (0.51%), chlorothalonil (Bravo WeatherStik) at 994 g a.i./100 L−1 (0.63%) and cuprous oxide (Nordox 750 WG) at 990 g a.i./100 L−1 (0.8%) of water significantly reduced the percentage of infected fruit compared to potassium phosphonate (Agri-Fos 600) at 1200 g a.i./100 L−1 (8.22%), dimethomorph (Acrobat) at 108 g a.i./100 L−1 (11.18%) and the untreated control (16%). Results from the second experiment showed fruit sprayed with copper hydroxide (Champ Dry Prill) at 300 (2.0% infected fruit), 375 (0.4%) and 450 g a.i./100 L−1 (0.6%) and metiram + pyraclostrobin (Aero) at 360 (2.8%), 480 (0.6%) and 600 g a.i./100 L−1 of water (1.0%) significantly reduced the percentage of infected fruit compared to the untreated control (19.4%). Foliar sprays of copper hydroxide at 375 g a.i./100 L−1 in rotation with chlorothalonil at 994 g a.i./100 L−1 every two weeks is now recommended to growers for controlling Phytophthora fruit rot of papaya.

Perennial pastures for marginal farming country in southern Queensland. 2. Potential new grass cultivar evaluation

Trials in the Condamine-Balonne basin, Australia, compared 11 promising perennial pasture grass accessions (4 Bothriochloa, 2 Cenchrus, 2 Urochloa and 1 each of Digitaria, Eragrostis and Panicum species) against the best similar commercial cultivars on the basis of ease of establishment from seed, persistence once established, forage yield and ease of seed production. Accessions sown at a site were determined by prior experience with them on a range of soils. High quality seed was relatively easy to produce for both Urochloa species and for Eragrostis curvula CPI 30374 but problematic for the Bothriochloa spp. Once established, all accessions persisted for 3–5 years and most were well grazed, but adequate establishment was sometimes a problem with Panicum stapfianum and Bothriochloa ewartiana. The dry matter yield ratings of the non-commercial lines were similar to those of the commercial equivalents of the same species. While agronomically valuable, none of the promising new grasses was considered worthy of commercialization at this point because their strengths did not warrant the setting up of a seed-production business in competition with current commercial enterprises. Long-standing cultivars such as Gayndah buffel and Nixon sabi grass continued to exhibit their superior pasture qualities.