Lattice Boltzmann method for flow and heat transfer in microgeometries

Recent technological developments have made it possible to design various microdevices where fluid flow and heat transfer are involved. For the proper design of such systems, the governing physics needs to be investigated. Due to the difficulty to study complex geometries in micro scales using experimental techniques, computational tools are developed to analyze and simulate flow and heat transfer in microgeometries. However, conventional numerical methods using the Navier-Stokes equations fail to predict some aspects of microflows such as nonlinear pressure distribution, increase mass flow rate, slip flow and temperature jump at the solid boundaries. This necessitates the development of new computational methods which depend on the kinetic theory that are both accurate and computationally efficient. In this study, lattice Boltzmann method (LBM) was used to investigate the flow and heat transfer in micro sized geometries. The LBM depends on the Boltzmann equation which is valid in the whole rarefaction regime that can be observed in micro flows. Results were obtained for isothermal channel flows at Knudsen numbers higher than 0.01 at different pressure ratios. LBM solutions for micro-Couette and micro-Poiseuille flow were found to be in good agreement with the analytical solutions valid in the slip flow regime (0.01 < Kn < 0.1) and direct simulation Monte Carlo solutions that are valid in the transition regime (0.1 < Kn < 10) for pressure distribution and velocity field. The isothermal LBM was further extended to simulate flows including heat transfer. The method was first validated for continuum channel flows with and without constrictions by comparing the thermal LBM results against accurate solutions obtained from analytical equations and finite element method. Finally, the capability of thermal LBM was improved by adding the effect of rarefaction and the method was used to analyze the behavior of gas flow in microchannels. The major finding of this research is that, the newly developed particle-based method described here can be used as an alternative numerical tool in order to study non-continuum effects observed in micro-electro-mechanical-systems (MEMS).

A capability maturity model to assess supply chain performance

In an overcapacity world, where the customers can choose from many similar products to satisfy their needs, enterprises are looking for new approaches and tools that can help them not only to maintain, but also to increase their competitive edge. Innovation, flexibility, quality, and service excellence are required to, at the very least, survive the on-going transition that industry is experiencing from mass production to mass customization. In order to help these enterprises, this research develops a Supply Chain Capability Maturity Model named S(CM)2. The Supply Chain Capability Maturity Model is intended to model, analyze, and improve the supply chain management operations of an enterprise. The Supply Chain Capability Maturity Model provides a clear roadmap for enterprise improvement, covering multiple views and abstraction levels of the supply chain, and provides tools to aid the firm in making improvements. The principal research tool applied is the Delphi method, which systematically gathered the knowledge and experience of eighty eight experts in Mexico. The model is validated using a case study and interviews with experts in supply chain management. The resulting contribution is a holistic model of the supply chain integrating multiple perspectives, and providing a systematic procedure for the improvement of a company’s supply chain operations.

Self-directed Learning in the Technological Age

Concerns arising out of technology often being used as an add-on to self-directed learning practices in the workplace and factors affecting such learning were investigated through a literature analysis. What is needed is an exploration of new possibilities of computational media on how self-directed learners think, create and learn.

Global Learning and the Human Capability Approach: Florida International University Case Study

This case study traced the process in which Florida International University engaged to determine what students want and need from their undergraduate education. Using grounded theory, the authors discovered that the process was reflective of the human capability approach in the development of its global learning student learning outcomes.

Lattice Boltzmann Method for Flow and Heat Transfer in Microgeometries

Recent technological developments have made it possible to design various microdevices where fluid flow and heat transfer are involved. For the proper design of such systems, the governing physics needs to be investigated. Due to the difficulty to study complex geometries in micro scales using experimental techniques, computational tools are developed to analyze and simulate flow and heat transfer in microgeometries. However, conventional numerical methods using the Navier-Stokes equations fail to predict some aspects of microflows such as nonlinear pressure distribution, increase mass flow rate, slip flow and temperature jump at the solid boundaries. This necessitates the development of new computational methods which depend on the kinetic theory that are both accurate and computationally efficient. In this study, lattice Boltzmann method (LBM) was used to investigate the flow and heat transfer in micro sized geometries. The LBM depends on the Boltzmann equation which is valid in the whole rarefaction regime that can be observed in micro flows. Results were obtained for isothermal channel flows at Knudsen numbers higher than 0.01 at different pressure ratios. LBM solutions for micro-Couette and micro-Poiseuille flow were found to be in good agreement with the analytical solutions valid in the slip flow regime (0.01 < Kn < 0.1) and direct simulation Monte Carlo solutions that are valid in the transition regime (0.1 < Kn < 10) for pressure distribution and velocity field. The isothermal LBM was further extended to simulate flows including heat transfer. The method was first validated for continuum channel flows with and without constrictions by comparing the thermal LBM results against accurate solutions obtained from analytical equations and finite element method. Finally, the capability of thermal LBM was improved by adding the effect of rarefaction and the method was used to analyze the behavior of gas flow in microchannels. The major finding of this research is that, the newly developed particle-based method described here can be used as an alternative numerical tool in order to study non-continuum effects observed in micro-electro-mechanical-systems (MEMS).

Self-assessment of clinical nurse mentors as dimensions of professional development and the capability of developing ethical values among nursing students : A correlational research study

Date of Acceptance: 08/04/2015 The paper presents, in part, the results of a broader non-profit development project entitled “Advance level of knowledge for quality in clinical mentorship — professional ethics and continuously professional development”. The project was financed by the Ministry of Higher Education, Science and Sport of the Republic of Slovenia (contract no. 3211-11-000263, the number of project OP RCV_VS-11-14). The members of the development group of the project were: Brigita Skela-Savič (leader), Karmen Romih, Sanela Pivač, Katja Skinder Savić and Andreja Prebil. The research report for the entire project is available on the online bibliographic database COBIB.si, at the Faculty of Health Care Jesenice and at the Ministry of Higher Education, Science and Sport of the Republic of Slovenia.

Self-assessment of clinical nurse mentors as dimensions of professional development and the capability of developing ethical values among nursing students : A correlational research study

Date of Acceptance: 08/04/2015 The paper presents, in part, the results of a broader non-profit development project entitled “Advance level of knowledge for quality in clinical mentorship — professional ethics and continuously professional development”. The project was financed by the Ministry of Higher Education, Science and Sport of the Republic of Slovenia (contract no. 3211-11-000263, the number of project OP RCV_VS-11-14). The members of the development group of the project were: Brigita Skela-Savič (leader), Karmen Romih, Sanela Pivač, Katja Skinder Savić and Andreja Prebil. The research report for the entire project is available on the online bibliographic database COBIB.si, at the Faculty of Health Care Jesenice and at the Ministry of Higher Education, Science and Sport of the Republic of Slovenia.

Self-assessment of clinical nurse mentors as dimensions of professional development and the capability of developing ethical values among nursing students : A correlational research study

Date of Acceptance: 08/04/2015 The paper presents, in part, the results of a broader non-profit development project entitled “Advance level of knowledge for quality in clinical mentorship — professional ethics and continuously professional development”. The project was financed by the Ministry of Higher Education, Science and Sport of the Republic of Slovenia (contract no. 3211-11-000263, the number of project OP RCV_VS-11-14). The members of the development group of the project were: Brigita Skela-Savič (leader), Karmen Romih, Sanela Pivač, Katja Skinder Savić and Andreja Prebil. The research report for the entire project is available on the online bibliographic database COBIB.si, at the Faculty of Health Care Jesenice and at the Ministry of Higher Education, Science and Sport of the Republic of Slovenia.

A socio-technological approach to sharing knowledge across disciplines

Thèse numérisée par la Direction des bibliothèques de l'Université de Montréal.

iGPS capability study

This report presents the results of testing of the Metris iGPS system performed by the National Physical Laboratory (NPL) and the University of Bath (UoB), with the assistance of Metris, and Airbus at Airbus, Broughton in March 2008. The aim of the test was to determine the performance capability of the iGPS coordinate metrology system by comparison with a reference measurement system based on multilateration implemented using laser trackers. A network of reference points was created using SMR nests fixed to the ground and above ground level on various stands. The reference points were spread out within the measurement volume of approximately 10 m ´ 10 m ´ 2 m. The coordinates of each reference point were determined by the laser tracker survey using multilateration. The expanded uncertainty (k=2) in the relative position of these reference coordinates was estimated to be of the order of 10 µm in x, y and z. A comparison between the iGPS system and the reference system showed that for the test setup, the iGPS system was able to determine lengths up to 12 m with an uncertainty of 170 µm (k=2) and coordinates with an uncertainty of 120 µm in x and y and 190 µm in z (k=2).

Beyond local search:bridging platforms and inter-sectoral technological integration

This paper explores the dynamics of inter-sectoral technological integration by introducing the concept of bridging platform as a node of pervasive technologies, whose collective broad applicability may enhance the connection between ‘distant’ knowledge by offering a technological coupling. Using data on patents obtained from the CRIOS-PATSTAT database for four EU countries (Germany, UK, France and Italy), we provide empirical evidence that bridging platforms are likely to connect more effectively innovations across distant technological domains, fostering inter-sectoral technological integration and the development of original innovation. Public research organisations are also found to play a crucial role in terms of technological integration and original innovation due to their higher capacity to access and use bridging platforms within their innovation activities.

Behavioral Perspectives on Organizational Change: Practice Adoption, Product Culling, and Technological Search

This dissertation explores the complex process of organizational change, applying a behavioral lens to understand change in processes, products, and search behaviors. Chapter 1 examines new practice adoption, exploring factors that predict the extent to which routines are adopted “as designed” within the organization. Using medical record data obtained from the hospital’s Electronic Health Record (EHR) system I develop a novel measure of the “gap” between routine “as designed” and routine “as realized.” I link this to a survey administered to the hospital’s professional staff following the adoption of a new EHR system and find that beliefs about the expected impact of the change shape fidelity of the adopted practice to its design. This relationship is more pronounced in care units with experienced professionals and less pronounced when the care unit includes departmental leadership. This research offers new insights into the determinants of routine change in organizations, in particular suggesting the beliefs held by rank-and-file members of an organization are critical in new routine adoption. Chapter 2 explores changes to products, specifically examining culling behaviors in the mobile device industry. Using a panel of quarterly mobile device sales in Germany from 2004-2009, this chapter suggests that the organization’s response to performance feedback is conditional upon the degree to which decisions are centralized. While much of the research on product exit has pointed to economic drivers or prior experience, these central finding of this chapter—that performance below aspirations decreases the rate of phase-out—suggests that firms seek local solutions when doing poorly, which is consistent with behavioral explanations of organizational action. Chapter 3 uses a novel text analysis approach to examine how the allocation of attention within organizational subunits shapes adaptation in the form of search behaviors in Motorola from 1974-1997. It develops a theory that links organizational attention to search, and the results suggest a trade-off between both attentional specialization and coupling on search scope and depth. Specifically, specialized unit attention to a more narrow set of problems increases search scope but reduces search depth; increased attentional coupling also increases search scope at the cost of depth. This novel approach and these findings help clarify extant research on the behavioral outcomes of attention allocation, which have offered mixed results.

Perpetuating sales: enabling incumbent survival of radical technological shifts

This paper examines an industry whose incumbents’ specialised complimentary assets were their operations management and distribution channels. This advantage was seriously undermined by the advent of digital distribution. Radical technological change theories dictate that if incumbents in an industry without specialised complimentary assets will be replaced by entrants. This did not happen, and extant theories of incumbent survival do not explain why the incumbents remained dominant in the industry. We propose that survival is due to the unique industry characteristic of perpetuating sales. This paper will explain what is a perpetuating sales model and why does it enable incumbent survival?

A socio-technological approach to sharing knowledge across disciplines

Thèse numérisée par la Direction des bibliothèques de l'Université de Montréal.