Using a NPWE model observer to assess suitable image quality for a digital mammography quality assurance programme.

A method of objectively determining imaging performance for a mammography quality assurance programme for digital systems was developed. The method is based on the assessment of the visibility of a spherical microcalcification of 0.2 mm using a quasi-ideal observer model. It requires the assessment of the spatial resolution (modulation transfer function) and the noise power spectra of the systems. The contrast is measured using a 0.2-mm thick Al sheet and Polymethylmethacrylate (PMMA) blocks. The minimal image quality was defined as that giving a target contrast-to-noise ratio (CNR) of 5.4. Several evaluations of this objective method for evaluating image quality in mammography quality assurance programmes have been considered on computed radiography (CR) and digital radiography (DR) mammography systems. The measurement gives a threshold CNR necessary to reach the minimum standard image quality required with regards to the visibility of a 0.2-mm microcalcification. This method may replace the CDMAM image evaluation and simplify the threshold contrast visibility test used in mammography quality.

Disseny, modelat i fabricació d'una antena "trap" per aplicacions WLAN

En aquest treball s’ha dissenyat i fabricat una antena monopol en estructura planar capaç de treballar correctament a les freqüències WLAN de 2,45-2,5 GHz (802.11b/g) i 4,9-5,875 GHz (802.11a/h/j). Per arribar a aquest objectiu primer s’ha presentat el model de línia de transmissió acabada en circuit obert per simular el comportament d’una antena. S’han comparat i verificat els resultats amb el model d’antena de fil. Seguidament, s’ha estudiat el comportament que introdueix el fet de carregar l’antena amb un ressonador LC. Finalment, s’ha passat del model d’antena de fil a una estructura planar. Aquesta geometria ha permès la realització del trap LC de forma distribuïda a través d’un ressonador CLL. El principi de disseny de l’antena està basat en la introducció d’aquest ressonador CLL amb freqüència de ressonància situada entre les dos bandes de treball i que junt amb l’ajust dels diversos paràmetres que defineixen l’antena han permès obtenir més 1 GHz d’ample de banda a la freqüència de 5 GHz.

Modelado de una cámara de onda milimétrica

En aquest projecte s'ha dissenyat i simulat una càmera d'ones mil·limètriques mitjançant "Spinning Reflectors" amb l'objectiu d'estudiar la qualitat de les imatges obtingudes, així com determinar la configuració de reflectors acceptable per a la nostra càmera. Per al seu disseny, s'ha realitzat el model d'una antena Cassegrain amb botzina alimentadora a FEKO i s'han simulat els diagrames de radiació corresponents als diferents angles de rotació d'ambdós reflectors al voltant de l'eix en el qual estan situats. Finalment, a partir del principi de funcionament de la nostra càmera, s'ha exposat la seva implementació física i s'ha representat en Matlab la seva PSF (Point Spread Function) i la imatge d'un objecte arbitrari d'acord amb les tècniques de formació d'imatges.

Effect of Knotting on the Shape of Polymers

Momentary configurations of long polymers at thermal equilibrium usually deviate from spherical symmetry and can be better described, on average, by a prolate ellipsoid. The asphericity and nature of asphericity (or prolateness) that describe these momentary ellipsoidal shapes of a polymer are determined by specific expressions involving the three principal moments of inertia calculated for configurations of the polymer. Earlier theoretical studies and numerical simulations have established that as the length of the polymer increases, the average shape for the statistical ensemble of random configurations asymptotically approaches a characteristic universal shape that depends on the solvent quality. It has been established, however, that these universal shapes differ for linear, circular, and branched chains. We investigate here the effect of knotting on the shape of cyclic polymers modeled as random isosegmental polygons. We observe that random polygons forming different knot types reach asymptotic shapes that are distinct from the ensemble average shape. For the same chain length, more complex knots are, on average, more spherical than less complex knots.

Eimeria peltocephali n. sp., (Apicomplexa:Eimeriidae) from the Freshwater Turtle Peltocephalus dumerilianus (Chelonia:Pelomusidae) and Eimeria molossi n. sp., from the Bat, Molossus ater (Mammalia:Chiroptera)

The oocyst is described of Eimeria peltocephali n.sp. from faeces of the freshwater turtle Peltocephalus dumerilianus from Barcelos, State of Amazonas, Brazil. Sporulation is exogenous and fully developed oocysts are elongate, ellipsoidal or cylindrical, frequently curved to a banana-shape, 54.4 x19.1 (37.5 - 68.7 x 18.7-20.0 µm), shape-index 2.8 (1.8 -3.9). The oocyst wall is a single thin, colourless layer about 1 µm thick, with no micropyle. There is a bulky oocyst residuum, at first spherical to ellipsoidal, 19 x 16 (16. 2 -26.2 x 16 - 21.5µm) , but becoming dispersed on maturation. There are no polar bodies. The sporocysts, 19.1 x 6.8 ( 17.5 -21.2 x 6.2 -7.5 µm), shape- index 2.8 (2.3 -3.2), are usually disposed in pairs at each end of the oocyst, and bear an inconspicuous Stieda body in the form of a flat cap. The sporozoites are elongate and slightly curved around the residuum. No refractile bodies were seen. Eimeria molossi n.sp., is described from the molossid bat Molossus ater. Sporulation is exogenous and the mature oocysts are predominantly broadly ellipsoidal, 23.4 x 17.5 (18-30 x 15-22.5 µm), shape-index 1.3 (1-1.6). The oocyst wall is about 2 µm thick, and of three layers: an inner thin, colourless one and two outer layers which are thicker, yellowish-brown, prominently striated and in close apposition. There is no micropyle or oocyst residuum, but one and occasionally two polar bodies are usually present. Sporocysts are ellipsoidal, 10.2 x 7.5 (10-12.5 x 7.5 µm), shape-index 1.4 (1.3-1.7) with an inconspicuous Stieda body. Endogenous stages are described in the epithelial cells of the small intestine

Cell Adhesion Peptide RGDSP and Laminin Support Proliferation and Migration of Postnatal Retinal Stem Cells in a 3D Hydrogel Culture System

Purpose: Retinal stem cells (RSCs) can be isolated from radial glia population of the newborn mouse retina (Angénieux et al., 2006). These RSCs have great capacity to renew and generate neurons including cells differentiated towards the photoreceptor lineage (Mehri-Soussi et al., 2006). However, our published results showed poor integration and survival rate after cell grafting into the retina. The uncontrollable environment of retina seems to be the problem. To bypass this, we are trying to generate hemi-retinal tissue in vitro that can be used for transplantation. Methods: Expanded RSCs were seeded in a mixture of poly-ethylene-glycol (PEG)-polymer-based hydrogels crosslinked by peptides that also serve as substrates for matrix metalloproteinases. Different doses of crosslinker peptides were tested. Several growth factors were studied to stimulate cell proliferation and differentiation. Results: Cells were trapped in hydrogels and cultured in the presence of FGF2 and EGF. Spherical cell clusters indicating proliferation appeared within several days, but there was no cell migration within the gel. We then added cell adhesion molecules integrin ligand RGDSP, or laminin, or a combination of both, into the gel. Cells grown with laminin showed the best proliferation. Cells grown with RGDSP proliferated a few times and then started to spread out. Cells grown with the combination of RGDSP and laminin showed better proliferation than with RGDSP alone and larger spread-outs than with laminin alone. After stimulations with first FGF2 and EGF, and then only FGF2, some cells showed neuronal morphology after 2 weeks. The neuronal population was assessed by the presence of neuronal marker b-tubulin-III. Glial cells were also present. Further characterizations are undergoing. Conclusions: RSC can grow and migrate in 3D hydrogel with the addition of FGF2, EGF, RGDSP and laminin. Further developments are necessary to form a homogenous tissue containing retinal cells.

Description of the Oocysts of Three New Species of Eimeria (Apicomplexa: Eimeriidae) from Iguanid Lizards (Sauria: Iguanidae) of Central and South America

Three new species of Eimeria are described from iguanid lizards of Central and South America. The oocysts of each species have no micropyles or residua and the sporocysts lack Stieda bodies, but all have a sporocyst residuum. Eimeria sanctaluciae n.sp. was found in the St. Lucia tree lizard, Anolis luciae, collected from the Maria Islands, Lesser Antilles. The oocysts are spherical to subspherical, averaging 17.3 x 16.5 µm, with a single layered colourless wall; about 60% contain polar granules. The sporocysts are ellipsoidal and average 7.7 x 5.5 µm. Eimeria liolaemi n.sp. was recovered from the blue-gold swift, Liolaemus taenius, from Chile. The oocysts are spherical to subspherical, measuring 21 x 20.1 µm with a single-layered colourless wall. The sporocysts are subspherical and average 7.4 x 6.8 µm. Eimeria caesicia n.sp. is described from the Brazilian collared iguanid, Tropidurus torquatus. The oocysts measure 27.4 x 23.7 µm, are spherical to subspherical, with a bilayered wall, the outer surface of which appears pale blue in colour, the thin, inner wall appearing brown, when viewed by direct light under the optical microscope. The sporocysts are subspherical and average 9.4 x 7.2 µm. Unnamed polysporocystid oocysts with dizoic sporocysts are reported from the faeces of the lesser St. Vincent tree lizard, Anolis trinitatis and the possibility of spurious parasitism briefly discussed. In addition, oocysts of an unnamed Isospora sp. with a smooth oocyst wall which closely resembles I. reui were recovered from A. trinitatis.

On Lundh's percolation diffusion

A collection of spherical obstacles in the unit ball in Euclidean space is said to be avoidable for Brownian motion if there is a positive probability that Brownian motion diffusing from some point in the ball will avoid all the obstacles and reach the boundary of the ball. The centres of the spherical obstacles are generated according to a Poisson point process while the radius of an obstacle is a deterministic function. If avoidable configurations are generated with positive probability Lundh calls this percolation diffusion. An integral condition for percolation diffusion is derived in terms of the intensity of the point process and the function that determines the radii of the obstacles.

Characterization of larval moulting cycles in Maja brachydactyla (Brachyura, Majidae) reared in the laboratory

The moulting cycles of all larval instars (zoea I, zoea II, and megalopa) of the spider crab Maja brachydactyla Balss 1922 were studied in laboratory rearing experiments. Morphological changes in the epidermis and cuticle were photographically documented in daily intervals and assigned to successive stages of the moulting cycle (based on Drach's classification system). Our moult-stage characterizations are based on microscopical examination of integumental modifications mainly in the telson, using epidermal condensation, the degree of epidermal retraction (apolysis), and morphogenesis (mainly setagenesis) as criteria. In the zoea II and megalopa, the formation of new setae was also observed in larval appendages including the antenna, maxillule, maxilla, second maxilliped, pleopods, and uropods. As principal stages within the zoea I moulting cycle, we describe postmoult (Drach's stages A–B combined), intermoult (C), and premoult (D), the latter with three substages (D0, D1, and D2). In the zoea II and megalopa, D0 and D1 had to be combined, because morphogenesis (the main characteristic of D1) was unclear in the telson and did not occur synchronically in different appendices. The knowledge of the course and time scale of successive moult-cycle events can be used as a tool for the evaluation of the developmental state within individual larval instars, providing a morphological reference system for physiological and biochemical studies related to crab aquaculture.

On Lundh's percolation diffusion

A collection of spherical obstacles in the unit ball in Euclidean space is said to be avoidable for Brownian motion if there is a positive probability that Brownian motion diffusing from some point in the ball will avoid all the obstacles and reach the boundary of the ball. The centres of the spherical obstacles are generated according to a Poisson point process while the radius of an obstacle is a deterministic function. If avoidable con gurations are generated with positive probability Lundh calls this percolation di usion. An integral condition for percolation di ffusion is derived in terms of the intensity of the point process and the function that determines the radii of the obstacles.

Forces de Casimir i les seves aplicacions

Report for the scientific sojourn carried out at the Darmouth College, from august 2007 until february 2008. It has been very successful, from different viewpoints: scientific, philosophical, human. We have definitely advanced, during the past six months, towards the comprehension of the behaviour of the fluctuations of the quantum vacuum in the presence of boundaries, moving and non-moving, and also in situations where the topology of space-time changes: the dynamical Casimir effect, regularization problems, particle creation statistics, according to different BC, etc. We have solved some longstanding problems and got in this subject quite remarkable results (as we will explain in more detail below). We also pursued a general approach towards a viable modified f(R) gravity in both the Jordan and the Einstein frames (which are known to be mathematically equivalent, but physically not so). A class of exponential, realistic modified gravities has been introduced by us and investigated with care. Special focus was made on step-class models, most promising from the phenomenological viewpoint and which provide a natural way to classify all viable modified gravities. One- and two-steps models were considered, but the analysis is extensible to N-step models. Both inflation in the early universe and the onset of recent accelerated expansion arise in these models in a natural, unified way, what makes them very promising. Moreover, it is monstrated in our work that models in this category easily pass all local tests, including stability of spherical body solution, non-violation of Newton's law, and generation of a very heavy positive mass for the additional scalar degree of freedom.

External morphology of sensory structures of fourth instar larvae of neotropical species of phlebotomine sand flies (Diptera: Psychodidae) under scanning electron microscopy

In the present study, some morphological structures of antennae, maxillary palps and caudal setae of fourth instar larvae of laboratory-reared phlebotomine sand flies (Lutzomyia longipalpis, L. migonei, L. evandroi, L. lenti, L. sericea, L. whitmani and L. intermedia) of the State of Ceará, Brazil, were examined under scanning electron microscopy. The antennal structures exhibited considerable variation in the morphology and position. A prominent digitiform distal segment has been observed only on the antenna of species of the subgenus Nyssomyia. The taxonomic relevance of this and other antennal structure is discussed. The papiliform structures found in the maxillae and the porous structures of the caudal setae of all species examined may have chemosensory function. Further studies with transmission electron microscopy are needed to better understand the physiological function of these external structures.

Intestinal Coccidia (Apicomplexa: Eimeriidae) of Brazilian Lizards. Eimeria carmelinoi n.sp., from Kentropyx calcarata and Acroeimeria paraensis n.sp. from Cnemidophorus lemniscatus lemniscatus (Lacertilia: Teiidae)

Eimeria carmelinoi n.sp., is described in the teiid lizard Kentropyx calcarata Spix, 1825 from north Brazil. Oocysts subspherical to spherical, averaging 21.25 x 20.15 µm. Oocyst wall smooth, colourless and devoid of striae or micropyle. No polar body or conspicuous oocystic residuum, but frequently a small number of fine granules in Brownian movement. Sporocysts, averaging 10.1 x 9 µm, are without a Stieda body. Endogenous stages characteristic of the genus: intra-cytoplasmic, within the epithelial cells of the ileum and above the host cell nucleus. A re-description is given of a parasite previously described as Eimeria cnemidophori, in the teiid lizard Cnemidophorus lemniscatus lemniscatus. A study of the endogenous stages in the ileum necessitates renaming this coccidian as Acroeimeria cnemidophori (Carini, 1941) nov.comb., and suggests that Acroeimeria pintoi Lainson & Paperna, 1999 in the teiid Ameiva ameiva is a synonym of A. cnemidophori. A further intestinal coccidian, Acroeimeria paraensis n.sp. is described in C. l. lemniscatus, frequently as a mixed infection with A. cnemidophori. Mature oocysts, averaging 24.4 x 21.8 µm, have a single-layered, smooth, colourless wall with no micropyle or striae. No polar body, but the frequent presence of a small number of fine granules exhibiting Brownian movements. Sporocysts 9 x 8, without a Stieda body. Endogenous stages epicytoplasmic, characteristic of the genus, in the upper ileum. The importance of a study of the endogenous stages of eimeriid coccidia is discussed.

Persistence of retinal function after intravitreal melphalan injection for retinoblastoma.

BACKGROUND: The risk/benefit profile of intravitreal melphalan injection for treatment of active vitreous seeds in retinoblastoma remains uncertain. We report clinical and electroretinography results after 6 months of one patient who has shown a favorable initial clinical response to intravitreal melphalan injections for treatment of refractory vitreous seeds. METHODS: Clinical case report. PATIENT: The patient presented at age 17 months with bilateral retinoblastoma [OD: International Classification (ICRB) group E, Reese-Ellsworth (R-E) class Vb; OS: ICRB D, R-E Vb] with no known prior family history. The right eye was enucleated primarily. The patient received systemic chemotherapy and extensive local treatment to the left eye. Ten months later, she presented with recurrent disease, including fine, diffuse vitreous seeds. Tumor control was established with intra-arterial chemotherapy and local treatment. Subsequent recurrence was treated with further intra-arterial chemotherapy, local treatment, and plaque radiotherapy with iodine-125. Persistent free-floating spherical vitreous seeds were treated with 4 cycles of intravitreal melphalan injection via the pars plana, with doses of 30, 30, 30, and 20 μg. RESULTS: After 6 months of follow-up, the left eye remained free of active tumor. Visual acuity was 20/40. Photopic ERGs amplitudes were unchanged compared with those recorded prior to the intravitreal injection treatments. CONCLUSIONS: Intravitreal melphalan injection for refractory spherical vitreous seeds of retinoblastoma with favorable tumor response is compatible with good central visual acuity and preservation of retinal function as indicated by photopic ERG recordings.

Changes associated with laboratory rearing in antennal sensilla patterns of Triatoma infestans, Rhodnius prolixus, and Rhodnius pallescens (Hemiptera, Reduviidae, Triatominae)

We examined changes in the array of antennal sensilla of three species of Triatominae (Triatoma infestans, Rhodnius prolixus, and R. pallescens) following their establishment for different periods in laboratory culture. In each case, the laboratory colonies were compared with conspecific samples taken directly from the field, by quantitative analysis of the sensilla arrays on the three distal segments of the antenna in terms of the densities of three types of chemoreceptors (basiconics and thick and thin walled trichoids) and one type of mechanoreceptor (bristles). Sensilla densities were compared by ANOVA or non-parametric tests, and by multivariate discriminant analysis. Strains of the same species reared in different laboratories showed significant differences in their sensilla arrays, especially when compared to field-collected material from the same geographic origin. A Bolivian strain of T. infestans reared in the laboratory for 15 years and fed at monthly intervals, showed greatest differences from its conspecific wild forms, especially in terms of reductions in the number of chemoreceptors. By contrast, an Argentine strain of T. infestans reared for 25 years in the laboratory and fed weekly, showed a relative increase in the density of mechanoreceptors. A Colombian strain of R. prolixus reared for 20 years and fed weekly or fortnightly, showed only modest differences in the sensilla array when compared to its wild populations from the same area. However, a Colombian strain of R. pallescens reared for 12 years and fed fortnightly, did show highly significant reductions in one form of chemoreceptor compared to its conspecific wild populations. For all populations, multivariate analysis clearly discriminated between laboratory and field collected specimens, suggesting that artificial rearing can lead to modifications in the sensory array. This not only supports the idea of morphological plasticity in these species, but also suggests caution in the use of long-established laboratory material for experimental studies designed to extrapolate the natural behaviour and physiology of these species.