Alternative Flexible Overlays, HR-229, Construction Report, 1983

The object of this research project is to construct and evaluate several bituminous concrete base overlays with various high penetration bituminous products which have the potential to reduce future maintenance and construction costs. In September of 1981 nine different bituminous test sections were constructed on Osceola County roads A-34 and A-46 east of Ashton. Asphalt binders used were AC-5 asphalt cement, SC-800 liquid asphalt, MC-3000 cutback asphalt, CSS-1 emulsion and HFMS-2 emulsion. Aggregate for four of the test sections consisted of salvaged bituminous pavement and new aggregate combined. Each section was road mixed using a different binder arid placed 2-1/4" thick with a motor patrol. The other five test sections consisted of an AC-5 Type B asphalt concrete control section and four plant-mixed, cold-laid bituminous concrete overlay sections using new aggregate. The material was mixed in a continuous drum mix plant and laid with a full width paver.

Vaccines safety; effect of supervision or SMS on reporting rates of adverse events following immunization (AEFI) with meningitis vaccine (MenAfriVac?): a randomized controlled trial.

BACKGROUND: To ensure vaccines safety, given the weaknesses of the national pharmacovigilance system in Cameroon, there is a need to identify effective interventions that can contribute to improving AEFI reporting. OBJECTIVE: To assess the effect of: (i) sending weekly SMS, or (ii) weekly supervisory visits on AEFI reporting rate during a meningitis immunization campaign conducted in Cameroon in 2012 using the meningitis A conjugate vaccine (MenAfriVac?). METHODS: Health facilities that met the inclusion criteria were randomly assigned to receive: (i) a weekly standardized SMS, (ii) a weekly standardized supervisory visits or (iii) no intervention. The primary outcome was the reported AEFI incidence rate from week 5 to 8 after the immunization campaign. Poisson regression model was used to estimate the effect of interventions after adjusting for health region, type of health facility, type and position of health workers as well as the cumulative number of AEFI reported from weeks 1 to 4. RESULTS: A total of 348 (77.2%) of 451 health facility were included, and 116 assigned to each of three groups. The incidence rate of reported AEFI per 100 health facility per week was 20.0 (15.9-24.1) in the SMS group, 40.2 (34.4-46.0) in supervision group and 13.6 (10.1-16.9) in the control group. Supervision led to a significant increase of AEFI reporting rate compared to SMS [adjusted RR=2.1 (1.6-2.7); p<0.001] and control [RR=2.8(2.1-3.7); p<0.001)] groups. The effect of SMS led to some increase in AEFI reporting rate compared to the control group, but the difference was not statistically significant [RR=1.4(0.8-1.6); p=0.07)]. CONCLUSION: Supervision was more effective than SMS or routine surveillance in improving AEFI reporting rate. It should be part of any AEFI surveillance system. SMS could be useful in improving AEFI reporting rates but strategies need to be found to improve its effectiveness, and thus maximize its benefits.

TRAKET II - Turvallisuus ja ympäristövaikutukset transitoliikenteessa

Tämätutkimus on osa TRAKET -hanketta, jossa keskitytään Luoteis-Venäjälle vievien transitoreittien kilpailukyvyn selvittämiseen. Tässä osatutkimuksessa tarkastellaan Suomen kautta kulkevan transitoliikenteen ympäristövaikutuksia ja turvallisuusnäkökohtia sekä niiden aiheuttamien kustannusten muuttumista liikennemäärän kasvaessa. Raportissa annetaan kehityssuosituksia ympäristö- ja onnettomuustilanteen parantamiseksi. Lisäksi tutkimuksessa esitetään uusien, transitoliikenteen osapuolille tarkoitettujen, lisäpalvelujen synnyttämiseen tarvittavia toimia.

Project Success through Effective Decisions: Case Studies on Project Goal Setting, Success Evaluation and Managerial Decision Making

The objective of the thesis is to structure and model the factors that contribute to and can be used in evaluating project success. The purpose of this thesis is to enhance the understanding of three research topics. The goal setting process, success evaluation and decision-making process are studied in the context of a project, business unitand its business environment. To achieve the objective three research questionsare posed. These are 1) how to set measurable project goals, 2) how to evaluateproject success and 3) how to affect project success with managerial decisions.The main theoretical contribution comes from deriving a synthesis of these research topics which have mostly been discussed apart from each other in prior research. The research strategy of the study has features from at least the constructive, nomothetical, and decision-oriented research approaches. This strategy guides the theoretical and empirical part of the study. Relevant concepts and a framework are composed on the basis of the prior research contributions within the problem area. A literature review is used to derive constructs of factors withinthe framework. They are related to project goal setting, success evaluation, and decision making. On the basis of this, the case study method is applied to complement the framework. The empirical data includes one product development program, three construction projects, as well as one organization development, hardware/software, and marketing project in their contexts. In two of the case studiesthe analytic hierarchy process is used to formulate a hierarchical model that returns a numerical evaluation of the degree of project success. It has its origin in the solution idea which in turn has its foundation in the notion of projectsuccess. The achieved results are condensed in the form of a process model thatintegrates project goal setting, success evaluation and decision making. The process of project goal setting is analysed as a part of an open system that includes a project, the business unit and its competitive environment. Four main constructs of factors are suggested. First, the project characteristics and requirements are clarified. The second and the third construct comprise the components of client/market segment attractiveness and sources of competitive advantage. Together they determine the competitive position of a business unit. Fourth, the relevant goals and the situation of a business unit are clarified to stress their contribution to the project goals. Empirical evidence is gained on the exploitation of increased knowledge and on the reaction to changes in the business environment during a project to ensure project success. The relevance of a successful project to a company or a business unit tends to increase the higher the reference level of project goals is set. However, normal performance or sometimes performance below this normal level is intentionally accepted. Success measures make project success quantifiable. There are result-oriented, process-oriented and resource-oriented success measures. The study also links result measurements to enablers that portray the key processes. The success measures can be classified into success domains determining the areas on which success is assessed. Empiricalevidence is gained on six success domains: strategy, project implementation, product, stakeholder relationships, learning situation and company functions. However, some project goals, like safety, can be assessed using success measures that belong to two success domains. For example a safety index is used for assessing occupational safety during a project, which is related to project implementation. Product safety requirements, in turn, are connected to the product characteristics and thus to the product-related success domain. Strategic success measures can be used to weave the project phases together. Empirical evidence on their static nature is gained. In order-oriented projects the project phases are oftencontractually divided into different suppliers or contractors. A project from the supplier's perspective can represent only a part of the ¿whole project¿ viewed from the client's perspective. Therefore static success measures are mostly used within the contractually agreed project scope and duration. Proof is also acquired on the dynamic use of operational success measures. They help to focus on the key issues during each project phase. Furthermore, it is shown that the original success domains and success measures, their weights and target values can change dynamically. New success measures can replace the old ones to correspond better with the emphasis of the particular project phase. This adjustment concentrates on the key decision milestones. As a conclusion, the study suggests a combination of static and dynamic success measures. Their linkage to an incentive system can make the project management proactive, enable fast feedback and enhancethe motivation of the personnel. It is argued that the sequence of effective decisions is closely linked to the dynamic control of project success. According to the used definition, effective decisions aim at adequate decision quality and decision implementation. The findings support that project managers construct and use a chain of key decision milestones to evaluate and affect success during aproject. These milestones can be seen as a part of the business processes. Different managers prioritise the key decision milestones to a varying degree. Divergent managerial perspectives, power, responsibilities and involvement during a project offer some explanation for this. Finally, the study introduces the use ofHard Gate and Soft Gate decision milestones. The managers may use the former milestones to provide decision support on result measurements and ad hoc critical conditions. In the latter milestones they may make intermediate success evaluation also on the basis of other types of success measures, like process and resource measures.

A European survey on current practices in epilepsy monitoring units and implications for patients' safety.

OBJECTIVE: This study aimed to survey current practices in European epilepsy monitoring units (EMUs) with emphasis on safety issues. METHODS: A 37-item questionnaire investigating characteristics and organization of EMUs, including measures for prevention and management of seizure-related serious adverse events (SAEs), was distributed to all identified European EMUs plus one located in Israel (N=150). RESULTS: Forty-eight (32%) EMUs, located in 18 countries, completed the questionnaire. Epilepsy monitoring unit beds are 1-2 in 43%, 3-4 in 34%, and 5-6 in 19% of EMUs; staff physicians are 1-2 in 32%, 3-4 in 34%, and 5-6 in 19% of EMUs. Personnel operating in EMUs include epileptologists (in 69% of EMUs), clinical neurophysiologists trained in epilepsy (in 46% of EMUs), child neurologists (in 35% of EMUs), neurology and clinical neurophysiology residents (in 46% and in 8% of EMUs, respectively), and neurologists not trained in epilepsy (in 27% of EMUs). In 20% of EMUs, patients' observation is only intermittent or during the daytime and primarily carried out by neurophysiology technicians and/or nurses (in 71% of EMUs) or by patients' relatives (in 40% of EMUs). Automatic detection systems for seizures are used in 15%, for body movements in 8%, for oxygen desaturation in 33%, and for ECG abnormalities in 17% of EMUs. Protocols for management of acute seizures are lacking in 27%, of status epilepticus in 21%, and of postictal psychoses in 87% of EMUs. Injury prevention consists of bed protections in 96% of EMUs, whereas antisuffocation pillows are employed in 21%, and environmental protections in monitoring rooms and in bathrooms are implemented in 38% and in 25% of EMUs, respectively. The most common SAEs were status epilepticus reported by 79%, injuries by 73%, and postictal psychoses by 67% of EMUs. CONCLUSIONS: All EMUs have faced different types of SAEs. Wide variation in practice patterns and lack of protocols and of precautions to ensure patients' safety might promote the occurrence and severity of SAEs. Our findings highlight the need for standardized and shared protocols for an effective and safe management of patients in EMUs.

Zoonotic occupational diseases in forestry workers: Lyme borreliosis, tularemia and leptospirosis in Europe

INTRODUCTION: Forestry workers and other people who come into close contact with wild animals, such as hunters, natural science researchers, game managers or mushroom/berry pickers, are at risk of contracting bacterial, parasitological or viral zoonotic diseases. Synthetic data on the incidence and prevalence of zoonotic diseases in both animals and humans in European forests do not exist. It is therefore difficult to promote appropriate preventive measures among workers or people who come into direct or indirect contact with forest animals. OBJECTIVES: The objectives of this review are to synthesise existing knowledge on the prevalence of the three predominant bacterial zoonotic diseases in Europe, i.e. Lyme borreliosis, tularemia and leptospirosis, in order to draw up recommendations for occupational or public health. METHODS: 88 papers published between 1995-2013 (33 on Lyme borreliosis, 30 on tularemia and 25 on leptospirosis) were analyzed. CONCLUSIONS: The prevalences of these three zoonotic diseases are not negligible and information targeting the public is needed. Moreover, the results highlight the lack of standardised surveys among different European countries. It was also noted that epidemiological data on leptospirosis are very scarce.

Räjähdyssuojausasiakirjan vaatima riskin arviointi muille kuin sähkölaitteille

Turvatekniikan keskuksella (TUKES) on valvottavanaan noin 1 000 teollisuuslaitosta, joissa on räjähdysvaarallisia tiloja. Olosuhdedirektiivin (1999/92/EY) mukainen kansal-linen asetus (VNa 576/2003) tuli voimaan 1.9.2003. Asetus koskee uusia räjähdysvaa-rallisia tiloja välittömästi, kun taas käytössä olevat tilat on saatettava sen mukaisiksi 30.6.2006 mennessä. Asetus edellyttää, että työnantaja laatii räjähdysvaarallisille tiloille räjähdyssuojausasiakirjan ja arvioi kirjallisesti näissä tiloissa käytettävien, ilman Ex-merkkiä olevien työvälineiden riskin. Räjähdyssuojausasiakirjan ja kirjallisena tehdyn riskin arvioinnin eräs keskeinen tarkoitus on varmistaa mahdollisten syttymislähteiden laaja-alainen hallinta ja pienentää onnettomuusriskiä. Tässä diplomityössä selvitetään, mitä riskin arvioinnin täytyy sisältää ja etsitään tehokas menetelmä arvioinnin tekoon. Kolmelta yritykseltä saatiin tutkittavaksi niiden alalle tyypillinen muu kuin sähkölaite, jota käytetään räjähdysvaarallisessa tilassa. Laitteiden tuli olla Ex-merkittömiä ja olla ollut käytössä ennen asetuksen voimaan tuloa. Laitteiden ja niiden dokumenttien tutkimisella testattiin eri menetelmien soveltuvuutta riskin arviointiin. Samalla selvitettiin jo käytössä olevien laitteiden turvallisuustaso. Jokaisen pilottitapauksen kohdalla on arvioinnissa menetelty eri tavoin. Työssä esitellään keskeisimmät menetelmät, joilla riskin arviointi voidaan tehdä. Suosi-tuksena esitellään ratkaisumalli, jonka avulla voidaan päätellä laitteen tarvitsema riskinarviointimenetelmä. Pilottitapauksia arvioitiin laitteiden sijoituksen ja lukumäärän pohjalta. Suosituksena on, että riskin arvioinnissa lähdetään liikkeelle itse laitteesta ja sen soveltuvuudesta räjähdysvaaralliseen tilaan. Tällä tavalla pystytään kohdistamaan käytössä olevat resurssit paremmin niihin laitteisiin, jotka vaativat tarkemman riskin arvioinnin. Pilottitapausten perusteella räjähdysvaaralliseen tilaan tarkoitetut laitteet soveltuivat käytettäväksi tarkoitetussa käytössään. Räjähdyssuojausasiakirjaa varten on dokumentoitava tiedot niiden käytöstä, mahdollisista syttymislähteistä ja suojaavista toimenpiteistä.

Anatomical UV Exposure in French Outdoor Workers.

BACKGROUND: Solar ultraviolet has been recognized as the main causative factor for skin cancer and is currently classified as a carcinogenic agent by International Agency for Research on Cancer. METHOD: Results from a previous phone survey conducted in 2012 in France were used to assess exposure conditions to sun among outdoor workers. Satellite data were used in combination with an exposure model to assess anatomical exposure. RESULT: The yearly median exposure of the outdoor worker population is 77  kJ/m2 to 116  kJ/m2. Road workers, building workers, and gardeners are the more exposed. About 70% of the yearly dose estimate is due to the cumulative summer and spring exposures. CONCLUSIONS: This study highlights the role of individual factors in anatomical exposure and ranks the most exposed body parts and outdoor occupations. Prevention messages should put emphasis on spring exposure, which is an important contributor to the yearly dose.

Beyond Value-at-Risk : GlueVaR Distortion Risk Measures

We propose a new family of risk measures, called GlueVaR, within the class of distortion risk measures. Analytical closed-form expressions are shown for the most frequently used distribution functions in financial and insurance applications. The relationship between Glue-VaR, Value-at-Risk (VaR) and Tail Value-at-Risk (TVaR) is explained. Tail-subadditivity is investigated and it is shown that some GlueVaR risk measures satisfy this property. An interpretation in terms of risk attitudes is provided and a discussion is given on the applicability in non-financial problems such as health, safety, environmental or catastrophic risk management

Transnational private authority, regulatory space and workers' collective competences: Bringing local contexts and worker agency back in

The impact of transnational private regulation on labour standards remains in dispute. While studies have provided some limited evidence of positive effects on 'outcome standards' such as wages or occupational health and safety, the literature gives little reason to believe that there has been any significant effect on 'process rights' relating primarily to collective workers' voice and social dialogue. This paper probes this assumption by bringing local contexts and worker agency more fully into the picture. It outlines an analytical framework that emphasizes workers' potential to act collectively for change in the regulatory space surrounding the employment relationship. It argues that while transnational private regulation on labour standards may marginally improve workers access to regulatory spaces and their capacity to require the inclusion of enterprises in them, it does little to increase union leverage. The findings are based on empirical research work conducted in Sub-Saharan Africa.

Törmäysystävällisen valaisinpylvään tuotteistaminen

Euroopan unioni on tiukentanut teiden laitteiden ja tukirakenteiden törmäysturvallisuusvaatimuksia. Uuden standardoinnin tarkoituksena on lieventää ajoneuvon kuljettajan ja matkustajan vammojen vakavuutta ajoneuvon törmätessä tielaitteiden pysyviin rakenteisiin. Käytännössä rakenteiden tulee hidastaa ajoneuvon nopeutta hallitusti eri törmäysnopeuksilla, jolloin matkustajaan kohdistuvat kiihtyvyydet eivät aiheuta vakavaa loukkaantumisriskiä. Vuonna 2005 Mikkelin ammattikorkeakoulun YTI-tutkimuskeskus ja Tehomet Oy kehittivät ensimmäisen version törmäysystävällisestä valaisinpylväästä. Tässä diplomityössä tavoitteena oli kehittää aikaisemmin tehdystä versiosta helpommin valmistettava versio sekä parantaa pylvään törmäyskäyttäytymistä. Valmistusmenetelmistä valittiin pultruusio, kuitukelaus, alipaineinjektio ja RTM. Menetelmille suunniteltiin soveltuvat rakenteet ja laskettiin rakenteiden valmistuskustannukset. Pultruusiolla, alipaineinjektiolla ja RTM:11ä valmistettiin koe-erä esitörmäyskokeita varten. Esitörmäyskokeiden jälkeen valittiin valmistusmenetelmäksi RTM. TKK/Tielaboratorion virallisissa testeissä kehitetylle pylväälle myönnettiin HE2-turvaluokitus. Hanketta jatketaan kehittämällä valmistusprosessia tehokkaammaksi uudistamalla muottitekniikkaa sekä ottamalla käyttöön lujiteaihiot. Tavoitteena on käynnistää tuotanto keväällä 2008. Kehitetty pylväs esitellään kansainvälisillä "Sähkö, Tele, Valo- ja AV 2008"-messuilla Jyväskylän Paviljongissa 6.-8.2.2008.

Health care workers' influenza vaccination: motivations and mandatory mask policy

BACKGROUND: Vaccination of health care workers (HCW) against seasonal influenza (SI) is recommended but vaccination rate rarely reach >30%. Vaccination coverage against 2009 pandemic influenza (PI) was 52% in our hospital, whilst a new policy requiring unvaccinated HCW to wear a mask during patient care duties was enforced. AIMS: To investigate the determinants of this higher vaccination acceptance for PI and to look for an association with the new mask-wearing policy. METHODS: A retrospective cohort study, involving HCW of three critical departments of a 1023-bed, tertiary-care university hospital in Switzerland. Self-reported 2009-10 SI and 2009 PI vaccination statuses, reasons and demographic data were collected through a literature-based questionnaire. Descriptive statistics, uni- and multivariate analyses were then performed. RESULTS: There were 472 respondents with a response rate of 54%. Self-reported vaccination acceptance was 64% for PI and 53% for SI. PI vaccination acceptance was associated with being vaccinated against SI (OR 9.5; 95% CI 5.5-16.4), being a physician (OR 7.7; 95% CI 3.1-19.1) and feeling uncomfortable wearing a mask (OR 1.7; 95% CI 1.0-2.8). Main motives for refusing vaccination were: preference for wearing a surgical mask (80% for PI, not applicable for SI) and concerns about vaccine safety (64%, 50%) and efficacy (44%, 35%). CONCLUSIONS: The new mask-wearing policy was a motivation for vaccination but also offered an alternative to non-compliant HCW. Concerns about vaccine safety and efficiency and self-interest of health care workers are still main determinants for influenza vaccination acceptance. Better incentives are needed to encourage vaccination amongst non-physician HCW.

Safety and sustainability research for university schools of fine arts

Designing new teaching programs for both undergraduate and graduate university studies involves integrating concepts and methodologies regarding quality, work safety and hazard prevention, and environmental protection. One of the challenges facing Spanish research within the realm of European Higher Education concerns health and safety issues in the Arts.In the case of Fine Arts, student exploration is one of the fundamental pillars of the study program; therefore it is imperative that art studios be optimized. This optimization affects both designated resources (infrastructures, materials, equipment, etc.) and organization of the teaching force.In this context, the aim of our research is to improve educational practices by designing quality measures that are both friendly to the environment and hazardous free. The aim here is to assure adequate art studio and laboratory management, and provide students with hazard free health and environmentally safe concepts that can be incorporated in their professional lives.The school of Fine Arts at the University of Barcelona is part of a pilot program, where our experience in educational innovation and research is serving as a reference for the implantation of OSHAS 18001 norms.

Safety and sustainability research for university schools of fine arts

Designing new teaching programs for both undergraduate and graduate university studies involves integrating concepts and methodologies regarding quality, work safety and hazard prevention, and environmental protection. One of the challenges facing Spanish research within the realm of European Higher Education concerns health and safety issues in the Arts.In the case of Fine Arts, student exploration is one of the fundamental pillars of the study program; therefore it is imperative that art studios be optimized. This optimization affects both designated resources (infrastructures, materials, equipment, etc.) and organization of the teaching force.In this context, the aim of our research is to improve educational practices by designing quality measures that are both friendly to the environment and hazardous free. The aim here is to assure adequate art studio and laboratory management, and provide students with hazard free health and environmentally safe concepts that can be incorporated in their professional lives.The school of Fine Arts at the University of Barcelona is part of a pilot program, where our experience in educational innovation and research is serving as a reference for the implantation of OSHAS 18001 norms.

Temporal Patterns of Alcohol Consumption and Alcohol-Related Road Accidents in Young Swiss Men: Seasonal, Weekday and Public Holiday Effects.

AIMS: To assess seasonal, weekday, and public holiday effects on alcohol-related road accidents and drinking diaries among young Swiss men. METHODS: Federal road accident data (35,485 accidents) from Switzerland and drinking diary data from a large cohort of young Swiss men (11,930 subjects) were analysed for temporal effects by calendar week, weekday and public holiday (Christmas, New Years, National Day). Alcohol-related accidents were analysed using rate ratios for observed versus expected numbers of accidents and proportions of alcohol-related accidents relative to the total number. Drinking diaries were analysed for the proportion of drinkers, median number of drinks consumed, and the 90th percentile's number of drinks consumed. RESULTS: Several parallel peaks were identified in alcohol-related accidents and drinking diaries. These included increases on Fridays and Saturdays, with Saturday drinking extending until early Sunday morning, an increase during the summer on workdays but not weekends, an increase at the end of the year, and increases on public holidays and the evening before. CONCLUSIONS: Our results suggest specific time-windows that are associated with increases in drinking and alcohol-related harm. Established prevention measures should be enforced during these time-windows to reduce associated peaks.