Error recovery in cyberphysical digital microfluidic biochips

Droplet-based digital microfluidics technology has now come of age, and software-controlled biochips for healthcare applications are starting to emerge. However, today's digital microfluidic biochips suffer from the drawback that there is no feedback to the control software from the underlying hardware platform. Due to the lack of precision inherent in biochemical experiments, errors are likely during droplet manipulation; error recovery based on the repetition of experiments leads to wastage of expensive reagents and hard-to-prepare samples. By exploiting recent advances in the integration of optical detectors (sensors) into a digital microfluidics biochip, we present a physical-aware system reconfiguration technique that uses sensor data at intermediate checkpoints to dynamically reconfigure the biochip. A cyberphysical resynthesis technique is used to recompute electrode-actuation sequences, thereby deriving new schedules, module placement, and droplet routing pathways, with minimum impact on the time-to-response. © 2012 IEEE.

Chemical and biological applications of digital-microfluidic devices

The advent of digital microfluidic lab-on-a-chip (LoC) technology offers a platform for developing diagnostic applications with the advantages of portability, reduction of the volumes of the sample and reagents, faster analysis times, increased automation, low power consumption, compatibility with mass manufacturing, and high throughput. Moreover, digital microfluidics is being applied in other areas such as airborne chemical detection, DNA sequencing by synthesis, and tissue engineering. In most diagnostic and chemical-detection applications, a key challenge is the preparation of the analyte for presentation to the on-chip detection system. Thus, in diagnostics, raw physiological samples must be introduced onto the chip and then further processed by lysing blood cells and extracting DNA. For massively parallel DNA sequencing, sample preparation can be performed off chip, but the synthesis steps must be performed in a sequential on-chip format by automated control of buffers and nucleotides to extend the read lengths of DNA fragments. In airborne particulate-sampling applications, the sample collection from an air stream must be integrated into the LoC analytical component, which requires a collection droplet to scan an exposed impacted surface after its introduction into a closed analytical section. Finally, in tissue-engineering applications, the challenge for LoC technology is to build high-resolution (less than 10 microns) 3D tissue constructs with embedded cells and growth factors by manipulating and maintaining live cells in the chip platform. This article discusses these applications and their implementation in digital-microfluidic LoC platforms. © 2007 IEEE.

Magnetophoretic circuits for digital control of single particles and cells.

The ability to manipulate small fluid droplets, colloidal particles and single cells with the precision and parallelization of modern-day computer hardware has profound applications for biochemical detection, gene sequencing, chemical synthesis and highly parallel analysis of single cells. Drawing inspiration from general circuit theory and magnetic bubble technology, here we demonstrate a class of integrated circuits for executing sequential and parallel, timed operations on an ensemble of single particles and cells. The integrated circuits are constructed from lithographically defined, overlaid patterns of magnetic film and current lines. The magnetic patterns passively control particles similar to electrical conductors, diodes and capacitors. The current lines actively switch particles between different tracks similar to gated electrical transistors. When combined into arrays and driven by a rotating magnetic field clock, these integrated circuits have general multiplexing properties and enable the precise control of magnetizable objects.

A LabVIEW Platform for Preclinical Imaging Using Digital Subtraction Angiography and Micro-CT.

CT and digital subtraction angiography (DSA) are ubiquitous in the clinic. Their preclinical equivalents are valuable imaging methods for studying disease models and treatment. We have developed a dual source/detector X-ray imaging system that we have used for both micro-CT and DSA studies in rodents. The control of such a complex imaging system requires substantial software development for which we use the graphical language LabVIEW (National Instruments, Austin, TX, USA). This paper focuses on a LabVIEW platform that we have developed to enable anatomical and functional imaging with micro-CT and DSA. Our LabVIEW applications integrate and control all the elements of our system including a dual source/detector X-ray system, a mechanical ventilator, a physiological monitor, and a power microinjector for the vascular delivery of X-ray contrast agents. Various applications allow cardiac- and respiratory-gated acquisitions for both DSA and micro-CT studies. Our results illustrate the application of DSA for cardiopulmonary studies and vascular imaging of the liver and coronary arteries. We also show how DSA can be used for functional imaging of the kidney. Finally, the power of 4D micro-CT imaging using both prospective and retrospective gating is shown for cardiac imaging.

Developing Quantitative Methodologies for the Digital Humanities: A Case Study of 20th Century American Commentary on Russian Literature

Using scientific methods in the humanities is at the forefront of objective literary analysis. However, processing big data is particularly complex when the subject matter is qualitative rather than numerical. Large volumes of text require specialized tools to produce quantifiable data from ideas and sentiments. Our team researched the extent to which tools such as Weka and MALLET can test hypotheses about qualitative information. We examined the claim that literary commentary exists within political environments and used US periodical articles concerning Russian literature in the early twentieth century as a case study. These tools generated useful quantitative data that allowed us to run stepwise binary logistic regressions. These statistical tests allowed for time series experiments using sea change and emergency models of history, as well as classification experiments with regard to author characteristics, social issues, and sentiment expressed. Both types of experiments supported our claim with varying degrees, but more importantly served as a definitive demonstration that digitally enhanced quantitative forms of analysis can apply to qualitative data. Our findings set the foundation for further experiments in the emerging field of digital humanities.

Uso de tecnología digital en la comprensión de parámetros en funciones polinomiales

Los estudiantes de enseñanza media se enfrentan al uso e interpretación de los parámetros en funciones polinomiales, lugares geométricos y expresiones algebraicas en general. Este hecho conduce a la necesidad no sólo de diferenciar los parámetros de otro tipo de literales como variables o incógnitas, sino también dar un sentido de uso a los mismos con la finalidad de agrupar los objetos matemáticos en entidades más generales como son las familias de funciones. El presente taller tiene como objetivo mostrar la influencia que puede tener el uso de un recurso tecnológico dinámico en la comprensión de esta polisemia de las literales, así como en la optimización de la ideas como puede ser la generalización.

Espaço de aprendizagem digital: o aprender a aprender por coperaçâo

O estudo é uma pesquisa-ação, na área da Informática na Educação Matemática, sobre a forma de aprender a aprender cooperativamente, segundo os Estudos Sociológicos de Piaget, no espaço de aprendizagem digital da Matemática, desenvolvida no IFRS – Osório, em 2011 e 2012, com 60 estudantes do ensino médio técnico em informática. A questão central é como analisar e compreender o processo de aprendizagem cooperativa dos conceitos de Matemática neste espaço. A definição deste espaço e de aprendizagem cooperativa é resultado desta pesquisa. Além disso, demonstra-se a construção dos conceitos de Matemática, e a mobilização dos estudantes em aprender incorporando-se as tecnologias digitais online às aulas de Matemática, sob a autonomia e responsabilidade de cada estudante e/ou de seu grupo.

Tecnología digital, actos y procesos semióticos en el estudio del objeto continuidad

La teoría de instrucción matemática significativa basada en el modelo ontológico -semiótico de la cognición matemática denominado Teoría de las Funciones Semióticas (TFS ) proporciona un marco unificado para el estudio de las diversas formas de conocimiento matemático y sus respectivas interacciones en el seno de los sistemas didácticos (Godino, 1998 ). Presentamos un desarrollo de esta teoría consistente en la descomposición de un objeto, para nuestro modelo, la Continuidad, en unidades para identificar entidades y las funciones semióticas que se establecen, en el proceso de enseñanza y aprendizaje en una institución escolar, implementando un ambiente de tecnología digital (calculadora graficadora TI-92 Plus y/o Voyage 200).

Geometrías no euclídeas: un acercamiento con tecnología digital

En este curso corto utilizamos distintas aplicaciones de geometría dinámica para realizar construcciones geométricas en el modelo de Poincaré para geometría hiperbólica con el propósito de investigar y determinar la naturaleza de algunos teoremas de geometría para la enseñanza secundaria y superior. De esta forma clasificamos algunos de los teoremas de geometría plana como neutrales, estrictamente euclidianas o estrictamente hiperbólicos.

La prensa como medio y recurso didáctico en la resolución de problemas matemáticos

Se presenta el manejo de la prensa como medio didáctico para lograr que los alumnos vean a la Matemática inmersa en su vida cotidiana, despertando en ellos su interés en la materia, logrando transformar noticias, comentarios, anuncios, etc., de la prensa, en problemas para aplicar en ellos el quehacer matemático: cómo enfrentarlos, la búsqueda de vías de solución y la resolución exitosa de los mismos. Utilizar los medios de información del ámbito social como recurso didáctico nos permitirá cambiar esquemas tradicionales de la enseñanza por métodos y técnicas de participación activa bajo un enfoque constructivista, el objetivo del trabajo es: Ofrecer indicaciones metodológicas para propiciar en los estudiantes la utilización de modelos matemáticos en situaciones prácticas, a través del uso de la prensa.

Publicidad: prensa del corazón y otros temas

Se han publicado en estos días de nuevo las estadísticas sobre el consumo de prensa en nuestro país: seguimos estando en 108 ejemplares por 1000 habitantes. Superamos ligeramente por arriba el nivel del subdesarrollo marcado por la UNESCO: 100 ejemplares. Y lejos, por supuesto, de los niveles de los países de nuestro entorno, que se suele decir ahora. Pero hay un elemento distorsionador. En esos países (Inglaterra, Alemania...) suben las estadísticas las tiradas de la prensa «amarilla», de los periódicos de cotilleos, suplidos aquí por las tiradas inmensas de las revistas del «corazón». A pesar de que suponen un capítulo importante de los medios, y por tanto de la conformación de la opinión pública, no siempre se tienen en cuenta, se les suele despreciar como poco importantes. Algo así ha pasado en esta sección... ¡hasta este momento!

Distributed digital post-production

It is now possible to use powerful general purpose computer architectures to support post-production of both video and multimedia projects. By devising a suitable portable software architecture and using high-speed networking in an appropriate manner, a system has been constructed where editors are no longer tied to a specific location. New types of production, such as multi-threaded interactive video, are supported. Editors may also work remotely where very high speed network connection is not currently provided. An object-oriented database is used for the comprehensive cataloging of material and to support automatic audio/video object migration and replication. Copyright © 1997 by the Society of Motion Picture and Television Engineers, Inc.