Contribution of Mental Health Service User Groups to Mental Health Services and Policy in Ghana : The Case of Mental Health Society of Ghana

RESUMO: Este estudo procurou documentar a perspectiva (s) dos utentes de saúde mental e das associações de prestadores de cuidados sobre a prestação, o papel e a contribuição de serviços de saúde mental da comunidade tal como foram percebidos por um número de informadores-chave, incluindo os utentes do serviço mentais e os próprios prestadores de cuidados. O caso específico da Sociedade Saúde Mental do Gana (MEHSOG) foi o foco deste estudo. O modelo foi o de um estudo de caso, utilizando discussões de grupo e entrevistas com informadores-chave como instrumentos de recolha de dados. Estas ferramentas de colheita de dados foram complementadas por observações dos participantes e pela revisão de documentos da MEHSOG e dos vários grupos de apoio da comunidade de auto-ajuda que compõem a associação nacional. O estudo revelou que os utentes dos serviços de saúde mental e seus prestadores de cuidados constituem um importante grupo de partes interessadas na prestação de serviços de saúde mental da comunidade e no desenvolvimento de políticas que tenham em conta as necessidades e os direitos das pessoas com doença mental ou epilepsia. O envolvimento da MEHSOG promove a mobilização de membros e famílias relacionadas com a doença mental de beneficiar de serviços de tratamento bem organizados com um impacto significativo na melhoria da saúde e da participação dos utentes dos serviços e seus prestadores de cuidados primários em processos de tomada de decisão da família e na comunidade processos de desenvolvimento. Os utentes dos serviços por beneficiarem de tratamento, e os prestadores de cuidados primários, por se tornarem mais livres e menos sobrecarregados com a responsabilidade de cuidar, podem passar a envolver-se mais em atividades que melhoramo seu estado, o de suas famílias e das comunidades. A advocacia dos membros da MEHSOG para conseguir que a “Mental Health Bill” se transforme numa Lei foi também um desenvolvimento significativo resultante da participação ativa dos utentes do serviço em chamar a atenção para uma nova e inclusiva legislação de saúde mental para o Gana. Entre os fatores e oportunidades que permitiram aos utentes dos serviços de saúde mental e aos prestadores de cuidados primários de pessoas com doença mental apoiar activamente a prestação de serviços de saúde mental comunitária e o desenvolvimento de políticas conta-se a contribuição da sociedade civil do Gana, particularmente o movimento da deficiência, e os esforços anteriores de ONGs em saúde mental e dos profissionais de saúde mental para ter uma nova lei em saúde mental. Observámos um certo número de desafios e barreiras que actuam de forma a limitar a influência dos utentes dos serviços de saúde mental na provisão da saúde mental comunitária e no desenvolvimento de políticas. Entre elas o estigma social contra a doença mental e pessoas com doença mental ou epilepsia e seus cuidadores primaries é um factor chave. O estigma tem alterado a percepção e as análises do público em geral, especialmente dos profissionais de saúde e das autoridades políticas afetando a priorização dos problemas de saúde mental nas políticas e programas. Outro desafio foi a deficiente infra-estrutura disponível para apoiar serviços de saúde mentais que assegurem aos utentes permanecerem em bom estado de saúde e bem-estar para serem advogados de si próprios. A recomendação do presente estudo é que os movimentos de utentes dos serviços de saúde mental são importantes e que eles precisam de ser apoiados e encorajados a desempenhar o seu papel como pessoas com experiência vivida para contribuir para a organização e prestação de serviços de saúde mental, bem como para a implementação, monitorização e avaliação de políticas e programas. ------------------------------------ ABSTRACT: This study sought to document the perspective(s) of mental health users and care-givers associations in community mental health service provision and their role and contribution as it was perceived by a number of key informants including the mental service users and care-givers themselves. The specific case of the Mental Health Society of Ghana (MEHSOG) was the focus of this study. A case study approach was used to with Focus Group Discussions and Key Informants Interviews being the data collection tools that were used. These data collection tools were complemented by participant observations and review of documents of the MEHSOG and the various community self-help peer support groups that make up the national association. The study revealed that mental health service users and their care-givers constitute an important stakeholder group in community mental health service provision and development of policies that factor in the needs and rights of persons with mental illness or epilepsy. MEHSOG’s involvement in mobilising members and education families to come forward with the relations with mental illness to benefit from treatment services were well made a significant impact in improving the health and participation of service users and their primary carers in family decision-making processes and in community development processes. Service users, on benefiting from treatment, and primary care-givers, on becoming freer and less burdened with the responsibility of care, move on to engage in secure livelihoods activities, which enhanced their status in their families and communities. The advocacy MEHSOG members undertook in getting the mental health Bill become Law was also noted as significant development that was realised as a result of active involvement of service users in calling for a new and inclusive mental health legislation for Ghana. Enabling factors and opportunities that enabled mental health service users and primary care-givers of people with mental illness to actively support community mental health service provision and policy development is with the vibrant civil society presence in Ghana, particularly the disability movement, and earlier efforts by NGOs in mental health in Ghana long-side mental health professionals to have a new law in mental health. A number of challenges were also noted which were found to limit the extent to which mental health service users can be influential in community mental health service provision and policy development. Key among them was the social stigma against mental illness and people with mental illness or epilepsy and their primary carers. Stigma has affected perceptions, analyses of the general public, especially health practitioners and policy authorities that it has affected their prioritisation of mental health issues in policies and programmes. Another challenge was the poor infrastructure available to support enhanced mental health care services that ensure mental health service users remain in a good state of health and wellbeing to advocate for themselves. The recommendation from the study is that mental health service user movements are important and need to be supported and encouraged to play their role as persons with lived experience to inform organisation and provision of mental health services as well as design and implementation, monitoring and evaluation of policies and programes.

Fiscalização dos serviços de informações em Portugal

The present work offers a brief historical and evolutionary introduction to the legal basis of the Portuguese Republic Intelligence System (SIRP) which comprises two services – the Security Intelligence Service (SIS) and the Defence Strategic Intelligence Service (SIED) – and two entities responsible for its oversight – the Supervisory Body (CFSIRP) and the Data Monitoring Committee (CFD), also responsible for supervising the Military Intelligence and Security Centre (CISMIL) of the General Staff of the Armed Forces (EMGFA). The initial narrative subsequently leads us to a detailed analysis of the Portuguese Intelligence services' current model of monitoring, as well as of the legislator’s options, namely in the legal drafting field, used within the construction and definition of the legal structure that currently regulates the Portuguese Republic Intelligence System. For the purposes of this study we have broadly examined different models of the European Union, in particular those of Belgium, the Netherlands and Croatia. We have also transposed to the text the valuable contributions collected during the research phase, more precisely the replies to questionnaires and interviews conducted with certain individuals selected according to their knowledge and affinity with the subject of this study, including members and former members of the Supervisory Body and former directors of the three portuguese intelligence services. The present dissertation intends to contribute to the development of this subject, promoting critical analysis, within and beyond the academia, with the aim that some of its reflections might be useful towards the intelligence system’s future reform, particularly in what concerns intelligence services monitoring.

Contratos de prestação de serviços de comunicações electrónicas

The object of this dissertation is the analysis of the legal framework applicable to contracts for provision of electronic communications services, while trying to offer solutions to some of the issues regarding this matter. The main focus of this study will be the rules concerning service’s suspension, which have been recently amended. The technological development and the establishment of these services as information transmitters and work tools were noteworthy for its growing importance at the present time. These services include cable television, telephone (landline and mobile) and internet and they are regulated by Law nr 23/96, July 26th, along with other essential public services. Said law sets a group of principles and duties, such as good faith (article 3), continuity and quality of the service (article 7) and the duty to rightfully inform the user (article 4), in order to protect the users. For the analysis of legal framework applicable to these particular contracts it is also fundamental to mention Law nr 5/2004, February 10th, known as Electronic Communications Law. The provisions regarding the service’s suspension are currently prescribed in articles 52.º and 52.º-A of the law. Given the amendments introduced by Law nr 10/2013, January 28th, consumers are subjected to a regulation different from the one applicable to the other users, established in the new article 52.º-A. From our analysis, we have concluded that the main change from past provisions has to do with the automatic termination of the contract as consequence of the consumer’s failure to pay the price or to conclude a written payment arrangement after service’s suspension.

Design of bio-inspired ionic liquids for protein stabilisation

Ionic Liquids (ILs) consist in organic salts that are liquid at/or near room temperature. Since ILs are entirely composed of ions, the formation of ion pairs is expected to be one essential feature for describing solvation in ILs. In recent years, protein - ionic liquid (P-IL) interactions have been the subject of intensive studies mainly because of their capability to promote folding/unfolding of proteins. However, the ion pairs and their lifetimes in ILs in P-IL thematic is dismissed, since the action of ILs is therefore the result of a subtle equilibrium between anion-cation interaction, ion-solvent and ion-protein interaction. The work developed in this thesis innovates in this thematic, once the design of ILs for protein stabilisation was bio-inspired in the high concentration of organic charged metabolites found in cell milieu. Although this perception is overlooked, those combined concentrations have been estimated to be ~300 mM among the macromolecules at concentrations exceeding 300 g/L (macromolecular crowding) and transient ion-pair can naturally occur with a potential specific biological role. Hence the main objective of this work is to develop new bio-ILs with a detectable ion-pair and understand its effects on protein structure and stability, under crowding environment, using advanced NMR techniques and calorimetric techniques. The choline-glutamate ([Ch][Glu]) IL was synthesized and characterized. The ion-pair was detected in water solutions using mainly the selective NOE NMR technique. Through the same technique, it was possible to detect a similar ion-pair promotion under synthetic and natural crowding environments. Using NMR spectroscopy (protein diffusion, HSQC experiments, and hydrogen-deuterium exchange) and differential scanning calorimetry (DSC), the model protein GB1 (production and purification in isotopic enrichment media) it was studied in the presence of [Ch][Glu] under macromolecular crowding conditions (PEG, BSA, lysozyme). Under dilute condition, it is possible to assert that the [Ch][Glu] induces a preferential hydration by weak and non-specific interactions, which leads to a significant stabilisation. On the other hand, under crowding environment, the [Ch][Glu] ion pair is promoted, destabilising the protein by favourable weak hydrophobic interactions , which disrupt the hydration layer of the protein. However, this capability can mitigates the effect of protein crowders. Overall, this work explored the ion-pair existence and its consequences on proteins in conditions similar to cell milieu. In this way, the charged metabolites found in cell can be understood as key for protein stabilisation.

Frequency-domain receiver design for doubly-selective channels

This work is devoted to the broadband wireless transmission techniques, which are serious candidates to be implemented in future broadband wireless and cellular systems, aiming at providing high and reliable data transmission and concomitantly high mobility. In order to cope with doubly-selective channels, receiver structures based on OFDM and SC-FDE block transmission techniques, are proposed, which allow cost-effective implementations, using FFT-based signal processing. The first subject to be addressed is the impact of the number of multipath components, and the diversity order, on the asymptotic performance of OFDM and SC-FDE, in uncoded and for different channel coding schemes. The obtained results show that the number of relevant separable multipath components is a key element that influences the performance of OFDM and SC-FDE schemes. Then, the improved estimation and detection performance of OFDM-based broadcasting systems, is introduced employing SFN (Single Frequency Network) operation. An initial coarse channel is obtained with resort to low-power training sequences estimation, and an iterative receiver with joint detection and channel estimation is presented. The achieved results have shown very good performance, close to that with perfect channel estimation. The next topic is related to SFN systems, devoting special attention to time-distortion effects inherent to these networks. Typically, the SFN broadcast wireless systems employ OFDM schemes to cope with severely time-dispersive channels. However, frequency errors, due to CFO, compromises the orthogonality between subcarriers. As an alternative approach, the possibility of using SC-FDE schemes (characterized by reduced envelope fluctuations and higher robustness to carrier frequency errors) is evaluated, and a technique, employing joint CFO estimation and compensation over the severe time-distortion effects, is proposed. Finally, broadband mobile wireless systems, in which the relative motion between the transmitter and receiver induces Doppler shift which is different or each propagation path, is considered, depending on the angle of incidence of that path in relation to the direction of travel. This represents a severe impairment in wireless digital communications systems, since that multipath propagation combined with the Doppler effects, lead to drastic and unpredictable fluctuations of the envelope of the received signal, severely affecting the detection performance. The channel variations due this effect are very difficult to estimate and compensate. In this work we propose a set of SC-FDE iterative receivers implementing efficient estimation and tracking techniques. The performance results show that the proposed receivers have very good performance, even in the presence of significant Doppler spread between the different groups of multipath components.

The mixed impact of design thinking on business collaborations

The present work project investigates the implications of design thinking on an interbusiness collaborative project, unveiling both the benefits and fragilities that derive from the use of such methodology within the mentioned context. The study is organized in two parts. The first one starts with a literature review on the two relevant frames of reference – design thinking and business collaboration. It proceeds to the creation of a conceptual framework to assess the potential value of the design-based approach. The second part focuses on the practical application of to the newly developed instrument to the inTRAIN project – R&D for railway interiors.

Impactos territoriais de processos de cooperação transfronteiriça : caso de estudo : Elvas e Badajoz

A cooperação transfronteiriça é vista na União Europeia como um modelo de integração territorial e como uma alternativa para o desenvolvimento das regiões de fronteira, devido ao seu afastamento em relação aos grandes centros urbanos. No início da década de 90 foi lançado o programa do INTERREG tendo em vista a maior permeabilidade da fronteira e o desenvolvimento destes territórios, entre os quais o das regiões do Alto Alentejo e da Extremadura. A grande proximidade territorial entre Elvas e Badajoz permitiu desde sempre relações de cooperação mais ou menos intensas e consentidas, mesmo antes da abertura da fronteira, motivadas sobretudo pela diferença de valor entre as duas moedas. Contudo, com a entrada conjunta dos países ibéricos na CEE (1986), essas relações intensificaram-se ao nível do comércio, do emprego, do turismo, do lazer e da procura de serviços. Impactos territoriais como a procura e utilização conjunta de infraestruturas e de espaços públicos pelas populações das duas cidades, a promoção e realização de espetáculos culturais, a prática de cross-border shopping, a procura de uma segunda residência, em ambos os lados da fronteira, e a tendência para uma urbanização contínua no futuro, justificaram a criação da Eurocidade Elvas-Badajoz (2013). Esta iniciativa tem como principais objetivos promover a conceção, gestão e prestação conjunta de serviços, desenvolver projetos de cooperação em áreas de interesse comum, estimular a cooperação entre empresas e atrair investimentos geradores de novos postos de trabalho. No entanto os desafios para ambas as cidades prendem-se com a existência de um quadro jurídico e legal distinto que tem condicionado algumas das ações ou iniciativas e o desenvolvimento territorial conjunto ainda carece de uma proposta estratégica.

TecMinho- Associação Universidade- Empresa para o Desenvolvimento : a comunicação estratégica aplicada a Ideias de negócio

O estágio curricular, inserido na componente não-lectiva do mestrado em Comunicação Estratégica é a ferramenta principal no desenvolvimento deste relatório. A TecMinho- Associação Universidade -Empresa para o Desenvolvimento, onde decorreu o estágio, é uma instituição de vanguarda, que promove a inovação, o empreendedorismo e o desenvolvimento de diferentes competências. Foca-se em diversas vertentes, desde a investigação e tecnologias, à formação, o empreendedorismo e a planos de negócio para empresas. Uma atividade particularmente relevante é o programa IdeaLab, um acelerador de ideias de negócio, que oferece aos promotores conhecimentos e ferramentas que lhes permite melhorar a concepção de produtos e serviços, e de ideias inovadoras, de modo a reforçar a sua proposta de valor. Neste programa são destacadas as competências empreendedoras através de workshops temáticos, coaching, networking e pré-incubação.

Design formula for the flexural strengthening of RC beams using prestressed CFRP reinforcement

Applying a certain prestress level to the carbon fiber reinforced polymer (CFRP) reinforcement according to either externally bonded reinforcing (EBR) or near surface mounted (NSM) techniques can mobilize the strengthening potentialities of this high tensile strength composite material. For the prediction of the flexural behavior of reinforced concrete (RC) structures strengthened with prestressed EBR or NSM CFRPs, however, simplified analytical and design formulations still need to be developed as a guidance for engineers to design this type of strengthened structures by hand calculation without any programming help. Hence, the current work aims to briefly explain a developed simplified analytical approach, with a design framework, to predict the flexural behavior of RC beams flexurally strengthened with either prestressed EBR or NSM CFRP reinforcements. Moreover, an upper limit for the prestress level is proposed in order to optimize the ductility performance of the NSM prestressing technique. The good predictive performance of the analytical approaches was appraised by simulating the results of experimental programs composed of RC beams strengthened with prestressed NSM CFRP reinforcements.

Affordable prefabricated modular houses using cement and polymer based materials and advanced design tools

By taking advantage of the appropriate use of cement and polymer based materials and advanced computational tools, a pre-fabricated affordable house was built in a modular system. Modular system refers to the complete structure that is built-up by assembling pre-fabricated sandwich panels composed of steel fibre reinforced self-compacting concrete (SFRSCC) outer layers that are connected by innovative glass fibre reinforced polymer (GFRP) connectors, resulting in a panel with adequate structural, acoustic, and thermal insulation properties. The modular house was prepared for a typical family of six members, but its living area can be easily increased by assembling other pre-fabricated elements. The speed of construction and the cost of the constructive elements make these houses competitive when compared to traditional solutions. In this paper the relevant research subjacent to this project (LEGOUSE) is briefly described, as well as the construction process of the built real scale prototype.

Outsourcing de serviços de sistemas de informação na banca em Portugal

Ao longo das últimas décadas a função sistemas de informação (SI) evoluiu e tornou-se verdadeiramente fundamental no seio das organizações. Apesar de esta evidência, nem sempre as organizações dispõem dos recursos internos e do know-how necessário para a desenvolver. O outsourcing de serviços de SI tem vindo a apresentar-se como uma alternativa e opção estratégica no contexto da gestão desta função em muitas organizações e em vários setores de atividade. Desenvolver uma melhor compreensão sobre as principais práticas de outsourcing de serviços de SI no setor da banca, dadas as particularidades que apresenta (por exemplo relativamente aos requisitos de confidencialidade e sigilo), constitui o objetivo central deste trabalho. Para tal, foi realizado um inquérito baseado em questionário com o intuito de caraterizar, entre outros aspetos, os serviços sujeitos a outsourcing, as principais motivações, riscos, barreiras e impactos associados ao outsourcing, bem como aspetos de contratação, relação cliente-fornecedor e satisfação. Os principais resultados obtidos são apresentados neste artigo.

Assessment of the effectiveness of steel fibre reinforcement for the punching resistance of flat slabs by experimental research and design approach

The present paper deals with the experimental assessment of the effectiveness of steel fibre reinforcement in terms of punching resistance of centrically loaded flat slabs, and to the development of an analytical model capable of predicting the punching behaviour of this type of structures. For this purpose, eight slabs of 2550 x 2550 x 150 mm3 dimensions were tested up to failure, by investigating the influence of the content of steel fibres (0, 60, 75 and 90 kg/m3) and concrete strength class (50 and 70 MPa). Two reference slabs without fibre reinforcement, one for each concrete strength class, and one slab for each fibre content and each strength class compose the experimental program. All slabs were flexurally reinforced with a grid of ribbed steel bars in a percentage to assure punching failure mode for the reference slabs. Hooked ends steel fibres provided the unique shear reinforcement. The results have revealed that steel fibres are very effective in converting brittle punching failure into ductile flexural failure, by increasing both the ultimate load and deflection, as long as adequate fibre reinforcement is assured. An analytical model was developed based on the most recent concepts proposed by the fib Mode Code 2010 for predicting the punching resistance of flat slabs and for the characterization of the behaviour of fibre reinforced concrete. The most refined version of this model was capable of predicting the punching resistance of the tested slabs with excellent accuracy and coefficient of variation of about 5%.

An investigation of safety design practices of metal machines

BACKGROUND: Machinery safety issues are a challenge facing manufacturers who are supposed to create and provide products in a better and faster way. In spite of their construction and technological advance, they still contribute to many potential hazards for operators and those nearby. OBJECTIVE: The aim of this study is to investigate safety aspects of metal machinery offered for sale on Internet market according to compliance with minimum and fundamental requirements. METHODS: The study was carried out with the application of a checklist prepared on the basis of Directive 2006/42/EC and Directive 2009/104/EC and regulations enforcing them into Polish law. RESULTS: On the basis of the study it was possible to reveal the safety aspects that were not met in practice. It appeared that in the case of minimum requirements the most relevant problems concerned information, signal and control elements, technology and machinery operations, whereas as far as fundamental aspects are concerned it was hard to assure safe work process. CONCLUSIONS: In spite of the fact that more and more legal acts binding in the Member Countries of the European Union are being introduced to alleviate the phenomenon, these regulations are often not fulfilled.

Design of a case-based reasoner for information security in military organizations

Information security is concerned with the protection of information, which can be stored, processed or transmitted within critical information systems of the organizations, against loss of confidentiality, integrity or availability. Protection measures to prevent these problems result through the implementation of controls at several dimensions: technical, administrative or physical. A vital objective for military organizations is to ensure superiority in contexts of information warfare and competitive intelligence. Therefore, the problem of information security in military organizations has been a topic of intensive work at both national and transnational levels, and extensive conceptual and standardization work is being produced. A current effort is therefore to develop automated decision support systems to assist military decision makers, at different levels in the command chain, to provide suitable control measures that can effectively deal with potential attacks and, at the same time, prevent, detect and contain vulnerabilities targeted at their information systems. The concept and processes of the Case-Based Reasoning (CBR) methodology outstandingly resembles classical military processes and doctrine, in particular the analysis of “lessons learned” and definition of “modes of action”. Therefore, the present paper addresses the modeling and design of a CBR system with two key objectives: to support an effective response in context of information security for military organizations; to allow for scenario planning and analysis for training and auditing processes.

Systematic design analysis and risk management on engineered nanoparticles occupational exposure

The production of nanotechnology-based products is increasing, along with the conscience of the possible harmful effects of some nanomaterials. The “safety-by-design” approaches are getting attention as helpful tools to develop safer products and production processes. The Systematic Design Analysis Approach could help to identify the solutions to control the workplace risks by defining the emission and exposure scenarios and the possible barriers to interrupt them. By applying this approach in a photocatalytic ceramic tiles development project it was possible to identify relevant nanoparticles emission scenarios and related barriers, and defining possible ways to reduce it.