Design basics : an introduction to rudimentary design ideas and sources

These notes were compiled from several authorities to be used for teaching and learning purposes here at QUT, with the focus on first and second year landscape architecture design studio units.

Design, simulation and analysis of a parallel hybrid electric propulsion system for unmanned aerial vehicles

Aerial Vehicles (UAV) has become a significant growing segment of the global aviation industry. These vehicles are developed with the intention of operating in regions where the presence of onboard human pilots is either too risky or unnecessary. Their popularity with both the military and civilian sectors have seen the use of UAVs in a diverse range of applications, from reconnaissance and surveillance tasks for the military, to civilian uses such as aid relief and monitoring tasks. Efficient energy utilisation on an UAV is essential to its functioning, often to achieve the operational goals of range, endurance and other specific mission requirements. Due to the limitations of the space available and the mass budget on the UAV, it is often a delicate balance between the onboard energy available (i.e. fuel) and achieving the operational goals. This paper presents the development of a parallel Hybrid Electric Propulsion System (HEPS) on a small fixed-wing UAV incorporating an Ideal Operating Line (IOL) control strategy. A simulation model of an UAV was developed in the MATLAB Simulink environment, utilising the AeroSim Blockset and the in-built Aerosonde UAV block and its parameters. An IOL analysis of an Aerosonde engine was performed, and the most efficient (i.e. provides greatest torque output at the least fuel consumption) points of operation for this engine were determined. Simulation models of the components in a HEPS were designed and constructed in the MATLAB Simulink environment. It was demonstrated through simulation that an UAV with the current HEPS configuration was capable of achieving a fuel saving of 6.5%, compared to the ICE-only configuration. These components form the basis for the development of a complete simulation model of a Hybrid-Electric UAV (HEUAV).

Multidisciplinary design and flight testing of a remote gas/particle airborne sensor system

The main objective of this paper is to describe the development of a remote sensing airborne air sampling system for Unmanned Aerial Systems (UAS) and provide the capability for the detection of particle and gas concentrations in real time over remote locations. The design of the air sampling methodology started by defining system architecture, and then by selecting and integrating each subsystem. A multifunctional air sampling instrument, with capability for simultaneous measurement of particle and gas concentrations was modified and integrated with ARCAA’s Flamingo UAS platform and communications protocols. As result of the integration process, a system capable of both real time geo-location monitoring and indexed-link sampling was obtained. Wind tunnel tests were conducted in order to evaluate the performance of the air sampling instrument in controlled nonstationary conditions at the typical operational velocities of the UAS platform. Once the remote fully operative air sampling system was obtained, the problem of mission design was analyzed through the simulation of different scenarios. Furthermore, flight tests of the complete air sampling system were then conducted to check the dynamic characteristics of the UAS with the air sampling system and to prove its capability to perform an air sampling mission following a specific flight path.

Numerical studies of load bearing LSF walls under realistic design fire conditions

Fire safety of light gauge steel frame (LSF) stud walls is important in the design of buildings. Currently LSF walls are increasingly used in the building industry, and are usually made of cold-formed and thin-walled steel studs that are fire-protected by two layers of plasterboard on both sides. Many experimental and numerical studies have been undertaken to investigate the fire performance of load bearing LSF walls under standard fire conditions. However, the standard time-temperature curve does not represent the fire load present in typical residential and commercial buildings that include considerable amount of thermoplastic materials. Real building fires are unlikely to follow a standard time-temperature curve. However, only limited research has been undertaken to investigate the fire performance of load bearing LSF walls under realistic design fire conditions. Therefore in this research, finite element thermal models of the traditional LSF wall panels without cavity insulation and the new LSF composite wall panels were developed to simulate their fire performance under recently developed realistic design fire curves. Suitable thermal properties were proposed for plasterboards and insulations based on laboratory tests and literature review. The developed models were then validated by comparing their thermal performance results with available results from realistic design fire tests, and were later used in parametric studies. This paper presents the details of the developed finite element thermal models of load bearing LSF wall panels under realistic design fire time-temperature curves and the re-sults. It shows that finite element thermal models can be used to predict the fire performance of load bearing LSF walls with varying configurations of insulations and plasterboards under realistic design fires. Failure times of load bearing LSF walls were also predicted based on the results from finite element thermal analyses.

Shear design of cold-formed steel beams using direct strength method

This paper presents the direct strength method (DSM) equations for cold-formed steel beams subject to shear. Light gauge cold-formed steel sections have been developed as more economical building solutions to the alternative heavier hot-rolled sections in the commercial and residential markets. Cold-formed lipped channel beams (LCB), LiteSteel beams (LSB) and hollow flange beams (HFB) are commonly used as flexural members such as floor joists and bearers. However, their shear capacities are determined based on conservative design rules. For the shear design of cold-formed web panels, their elastic shear buckling strength must be determined accurately including the potential post-buckling strength. Currently the elastic shear buckling coefficients of web panels are determined by assuming conservatively that the web panels are simply supported at the junction between the flange and web elements and ignore the post-buckling strength. Hence experimental and numerical studies were conducted to investigate the shear behaviour and strength of LSBs, LCBs and HFBs. New direct strength method (DSM) based design equations were proposed to determine the ultimate shear capacities of cold-formed steel beams. An improved equation for the higher elastic shear buckling coefficient of cold-formed steel beams was proposed based on finite element analysis results and included in the DSM design equations. A new post-buckling coefficient was also introduced in the DSM equation to include the available post-buckling strength of cold-formed steel beams.

Performance comparison of four power system stabilizer

The well-known power system stabilizer (PSS) is used to generate supplementary control signals for the excitation system of a generator so as to damp low frequency oscillations in the power system concerned. Up to now, various kinds of PSS design methods have been proposed and some of them applied in actual power systems with different degrees. Given this background, the small-disturbance eigenvalue analysis and large-disturbance dynamic simulations in the time domain are carried out to evaluate the performances of four different PSS design methods, including the Conventional PSS (CPSS), Single-Neuron PSS (SNPSS), Adaptive PSS (APSS) and Multi-band PSS (MBPSS). To make the comparisons equitable, the parameters of the four kinds of PSSs are all determined by the steepest descent method. Finally, an 8-unit 24-bus power system is employed to demonstrate the performances of the four kinds of PSSs by the well-established eigenvalue analysis as well as numerous digital simulations, and some useful conclusions obtained.

Improving opportunity recognition and business performance in small and medium manufacturing enterprises through design innovation programs

Increasing awareness of the benefits of stimulating entrepreneurial behaviour in small and medium enterprises has fostered strong interest in innovation programs. Recently many western countries have invested in design innovation for better firm performance. This research presents some early findings from a study of companies that participated in a holistic approach to design innovation, where the outcomes include better business performance and better market positioning in global markets. Preliminary findings from in-depth semi-structured interviews indicate the importance of firm openness to new ways of working and to developing new processes of strategic entrepreneurship. Implications for theory and practice are discussed.

Catalysing design principles through the dreaming of sustainable subtropical cityscapes : the collaborative construction of new place identities

This paper addresses the question of how to open up pathways and build capacity to facilitate the movement towards sustainable sub-tropical cities. The focus is on outlining a collaborative planning and co-design process that can help catalyse the emergence of sustainable place-habitats and so re-weave and colour anew the tapestry of our sub-tropical cities. Cities are portrayed as self-organising complex adaptive system phenomena, being constantly re-shaped by local and global social-political, environmental, cultural and economic forces as well as planning regimes. While constructing a sustainable city is at essence a design process incorporating new sustainable practices and legislation to reinforce their use, these steps are necessary but not sufficient. Sustainable sub-tropical city-making could be re-thought as a dreaming-re-storying process. This paper explores a new co-design process, which can channel collaborative efforts around re-inventing sustainable place-habitats across the cityscape. A further outcome of this co-design process is the alignment of the emergent design principles and planning actions that can trigger the re-storying of a new sustainable sub-tropical city. Besides a new co-design process, we also advocate the building of sub-tropical city learning networks to facilitate the cross-fertilization for Dreaming sustainable sub-tropical cities.

Designing Innovative Business Models : A Design Catalyst Learning Resource

The term Design Led Innovation is emerging as a fundamental business process, which is rapidly being adopted by large as well as small to medium sized firms. The value that design brings to an organisation is a different way of thinking, of framing situations and possibilities, doing things and tackling problems: essentially a cultural transformation of the way the firm undertakes its business. Being Design Led is increasingly being seen by business as a driver of company growth, allowing firms to provide a strong point of difference to its stakeholders. Achieving this Design Led process, requires strong leadership to enable the organisation to develop a clear vision for top line growth. Specifically, based on deep customer insights and expanded through customer and stakeholder engagements, the outcomes of which are then adopted by all aspects of the business. To achieve this goal, several tools and processes are available, which need to be linked to new organisational capabilities within a business transformation context. The Design Led Innovation Team focuses on embedding tools and processes within an organisation and matching this with design leadership qualities to enable companies to create breakthrough innovation and achieve sustained growth, through ultimately transforming their business model. As all information for these case studies was derived from publicly accessed data, this resource is not intended to be used as reference material, but rather is a learning tool for designers to begin to consider and explore businesses at a strategic level. It is not the results that are key, but rather the process and philosophies that were used to create these case studies and disseminate this way of thinking amongst the design community. It is this process of unpacking a business guided by the framework of Osterwalder’s Business Model Canvas* which provides an important tool for designers to gain a greater perspective of a company’s true innovation potential.

Rock, paper, scissors : reflective practice for design process in the novice landscape architect

We describe a pedagogical approach that addresses challenges in design education for novices. These include an inability to frame new problems and limited-to-no design capability or domain knowledge. Such challenges can reduce student engagement with design practice, cause derivative design solutions as well as the inappropriate simplification of design assignments and assessment criteria by educators. We argue that a curriculum that develops the student’s design process will enable them to deal with the uncertain and dynamic situations that characterise design. We describe how this may be achieved and explain our pedagogical approach in terms of methods from Reflective Practice and theories of abstraction and creativity. We present a landscape architecture unit, recently taught, as an example. It constitutes design exercises that require little domain or design expertise to support the development of conceptual thinking and a design rationale. We show how this approach (a) leveraged the novice’s existing spatial and thinking skills while (b) retaining contextually-rich design situations. Examples of the design exercises taught are described along with samples of student work. The assessment rationale is also presented and explained. Finally, we conclude by reflecting on how this approach relates to innovation, sustainability and other disciplines.

Resilient Maroochydore 2029 : Urban Design Futures

Resilient Maroochydore 2029 This exhibition showcases the work of 4th year undergraduate Landscape Architecture students in response to issues of sustainability in Maroochydore on the Queensland Sunshine coast. The projects comprising this exhibition all investigate possible design futures for the Maroochydore Centre, in the light of a series of new disturbance scenarios. Specific disturbances upon the landscape have been imagined, and design resolutions developed based on resilience to these disturbances. The proposals investigate how the Maroochydore Centre might respond to these scenarios, and how future components of the Centre might be designed for greater ‘resilience’. The Exhibition Five groups of students (32 in total) produced five strategic planning and design options toward this future: Team Transect: “What happens to a region following a sustained period of economic prosperity, with affordable property and negligible unemployment? This proposal investigates the effects on a community of massive population explosion, land shortages and inadequate planning regulations following an extended boom period.” The Foodfighters: “This proposal considers the scenario of massive food shortages and of escalating prices, and the possibility of government intervention to stabilise food supply. Strategies based upon simplified, collaborative approaches to food production are investigated.” The TTMKG: “This proposal explores the scenario of Peak Oil and the subsequent effects on society of homelessness, large scale unemployment, food shortages and global financial and political instability. Individual opportunities are restricted by the limitations of bicycle transportation.” Team Peak: “Peak Oil has restricted private vehicle transport to only the most wealthy, while public transport systems are under immense pressure. Rising unemployment drives localised trade initiatives, and the global import/export market has collapsed. This proposal considers the transition of a community from its position in a global economy to that of a relocalised economy, where basic needs are secured as close to home as possible.” After the City: “A rapid population decline as a result of the region’s failing economy has resulted in a fragmented urban fabric. This proposal investigates the possibility of new suburbanisation, reinterpretation and reinvention of space through phased processes.”

Design + ethics

The socio-cultural purpose of the university has been de-emphasised in recent decades, however, various community engagement projects that have been undertaken by design schools in higher education institutions are bringing this back into focus. Through the design skills of academic staff and students, a number of projects have been identified and undertaken in partnership with communities as well as the public and private sectors. The 2008 ‘Linking Karumba’ project, among others, shows that academy-based design and education professionals can contribute to social development through making good design accessible to disadvantaged communities.

Community engagement : creating sustainable futures by design

QUT Alumni and Development Office, Engagement and Partnerships Seminar 'Managing Partnerships' As part of a week of engagement/partnership activities, this seminar outlined the engagement practices of 'Sustainable Futures by Design' and the BAC partnership. Presenters of two QUT Engagement Innovation projects discussed how emphasis on how the project benefited their work and the university generally, especially through the partnership, including through enhanced teaching and research. They outlined the principles and practices of good partnership management. Presenters: Shannon Satherley & Les Dawes: Community Engagement: Creating Sustainable Futures by Design Ashantha Goonetilleke & Bernard Murchison: QUT - BAC Partnership Satherley & Dawes: 'Developing and Maintaining the Partnerships: giving and receiving; expecting the unexpected; administration; enjoying the rewards.'C

Changing relationships : Re-activating student and staff engagement in the design studio learning environment

QUT Teaching and Learning Support Services 'Revisiting University Teaching’program for mid-career academics. 'Innovations in Teaching at QUT' presentations. Presentations were part of a 2 day program that provides opportunities for experienced academic staff with responsibilities for teaching to review their current teaching practices and explore innovations in teaching that will assist them to enhance student learning and develop their own scholarship of teaching. The presenter responded to the following: 1.What is the innovation you have incorporated into your teaching? - give a brief overview/ description/ demonstration of the innovation 2.What challenges/issues prompted you to make changes in your approach? Were they discipline specific? Operational? Opportunistic? 3.What factors did you need to consider in implementing these changes? Which factors enabled success or hindered? 4.What has this innovation achieved so far? How have learners responded? How have the broader teaching team and academic staff from other units in your course responded? 5.How could this innovation be used by other academics in their teaching? What do you see as the possibilities for further expansion of this innovation? (NB. This question could be answered as part of a final sharing of group discussion). Presenter: Shannon Satherley