Preparation and optimization of calcium fluoride particles for dental applications.

Fluorides are used in dental care due to their beneficial effect in tooth enamel de-/remineralization cycles. To achieve a desired constant supply of soluble fluorides in the oral cavity, different approaches have been followed. Here we present results on the preparation of CaF2 particles and their characterization with respect to a potential application as enamel associated fluoride releasing reservoirs. CaF2 particles were synthesized by precipitation from soluble NaF and CaCl2 salt solutions of defined concentrations and their morphology analyzed by scanning electron microscopy. CaF2 particles with defined sizes and shapes could be synthesized by adjusting the concentrations of the precursor salt solutions. Such particles interacted with enamel surfaces when applied at fluoride concentrations correlating to typical dental care products. Fluoride release from the synthesized CaF2 particles was observed to be largely influenced by the concentration of phosphate in the solution. Physiological solutions with phosphate concentration similar to saliva (3.5 mM) reduced the fluoride release from pure CaF2 particles by a factor of 10-20 × as compared to phosphate free buffer solutions. Fluoride release was even lower in human saliva. The fluoride release could be increased by the addition of phosphate in substoichiometric amounts during CaF2 particle synthesis. The presented results demonstrate that the morphology and fluoride release characteristics of CaF2 particles can be tuned and provide evidence of the suitability of synthetic CaF2 particles as enamel associated fluoride reservoirs.

Calling and career preparation: Investigating developmental patterns and temporal precedence

The presence of a calling and career development are assumed to be closely related. However, the nature of and reason for this relationship has not been thoroughly investigated. We hypothesized the existence of reciprocal effects between calling and three dimensions of career preparation and assessed the change of the presence of a calling, career planning, decidedness, and self-efficacy with three waves of a diverse sample of German university students (N = 846) over one year. Latent growth analyses revealed that the intercepts of calling showed a siginficant positive correlation with the intercepts of all career preparation measures. The slope of calling was positively related to those of decidedness and self-efficacy but not to planning. Cross-lagged analyses showed that calling predicted a subsequent increase in planning and self-efficacy. Planning and decidedness predicted an incrrease in the presence of a calling. The results suggest that calling and career preparation are related due to mutual effects but that effects differ for different career preparation dimensions.

Engagement in adolescent career preparation: Social support, personality, and the development of choice decidedness and congruence

This longitudinal panel study investigated predictors and outcomes of active engagement in career preparation among 349 Swiss adolescents from the beginning to the end of eighth grade. Latent variable structural equation modeling was applied. The results showed that engagement in terms of self- and environmental-exploration and active career planning related positively to interindividual increases in career decidedness and choice congruence. More perceived social support, early goal decidedness, and particular personality traits predicted more engagement. Support and personality impacted outcomes only mediated through engagement. Early decidedness and congruence were significant predictors of their respective later levels. Implications for practice are presented.

Bone Conditioned Medium: Preparation and Bioassay.

Autologous bone grafts are widely used in oral and maxillofacial surgery, orthopedics, and traumatology. Autologous bone grafts not only replace missing bone, they also support the complex process of bone regeneration. This favorable behavior of autografts is attributed to the three characteristics: osteoconductivity, osteogenicity, and osteoinductivity. However, there is another aspect: Bone grafts release a myriad of molecules, including growth factors, which can target mesenchymal cells involved in bone regeneration. The paracrine properties of bone grafts can be studied in vitro by the use of bone-conditioned medium (BCM). Here we present a protocol on how to prepare bone-conditioned medium from native pig cortical bone, and bone that underwent thermal processing or demineralization. Cells can be directly exposed to BCM or seeded onto biomaterials, such as collagen membranes, previously soaked with BCM. We give examples for in vitro bioassays with mesenchymal cells on the expression of TGF-β regulated genes. The presented protocols should encourage to further reveal the paracrine effects of bone grafts during bone regeneration and open a path for translational research in the broad field of reconstructive surgery.

Iodine-129: Sample preparation, quality control and analyses of pre-nuclear materials and of natural waters from Lower Saxony, Germany

Sample preparation procedures for AMS measurements of 129I and 127I in environmental materials and some methodological aspects of quality assurance are discussed. Measurements from analyses of some pre-nuclear soil and thyroid gland samples and of a systematic investigation of natural waters in Lower Saxony, Germany, are described. Although the up-to-now lowest 129I/127I ratios in soils and thyroid glands were observed, they are still suspect to contamination since they are significantly higher than the pre-nuclear equilibrium ratio in the marine hydrosphere. A survey on all available 129I/127I isotopic ratios in precipitation shows a dramatic increase until the middle of the 1980s and a stabilization since 1987 at high isotopic ratios of about (3.6–8.3)×10−7. In surface waters, ratios of (57–380)×10−10 are measured while shallow ground waters show with ratios of (1.3–200)×10−10 significantly lower values with a much larger spread. The data for 129I in soils and in precipitation are used to estimate pre-nuclear and modern 129I deposition densities.

Evaluation of the Morphological Characteristics of Laser-Irradiated Dentin

OBJECTIVE The aim of this study was to investigate the effect of different energy settings of Er:YAG laser irradiation on dentin surface morphology with respect to the number of opened dentinal tubules. BACKGROUND DATA An ideally prepared dentin surface with opened dentinal tubules is a prerequisite for adhesive fixation. No study, however, has yet compared the numbers of opened dentinal tubules with regard to statistical differences. METHODS Conventional preparations using a bur with or without additional acid etching acted as control groups. Dentin specimens were prepared from human third molars and randomly divided into eight groups according to the energy settings of the laser (1, 1.5, 4, 6, 7.5, and 8 W) and two controls (bur and bur plus acid etching). After surface preparation, dentin surfaces were analyzed with a scanning electron microscope, and the number of opened dentinal tubules in a defined area was counted. RESULTS The control groups showed smooth surfaces with (bur plus acid etching) and without opened dentinal tubules (bur), whereas all laser-irradiated surfaces showed rough surfaces. Using the energy setting of 4 W resulted in significantly more opened dentinal tubules than the conventional preparation technique using the bur with additional acid etching. In contrast, the energy setting of 8 W showed significantly fewer opened dentinal tubules, and also exhibited signs of thermal damage. CONCLUSIONS The Er:YAG laser with an energy setting of 4 W generates a dentin surface with opened dentinal tubules, a prerequisite for adhesive fixation.

Focal Epilepsy: MR Imaging of Nonhemodynamic Field Effects by Using a Phase-cycled Stimulus-induced Rotary Saturation Approach with Spin-Lock Preparation.

Purpose To investigate whether nonhemodynamic resonant saturation effects can be detected in patients with focal epilepsy by using a phase-cycled stimulus-induced rotary saturation (PC-SIRS) approach with spin-lock (SL) preparation and whether they colocalize with the seizure onset zone and surface interictal epileptiform discharges (IED). Materials and Methods The study was approved by the local ethics committee, and all subjects gave written informed consent. Eight patients with focal epilepsy undergoing presurgical surface and intracranial electroencephalography (EEG) underwent magnetic resonance (MR) imaging at 3 T with a whole-brain PC-SIRS imaging sequence with alternating SL-on and SL-off and two-dimensional echo-planar readout. The power of the SL radiofrequency pulse was set to 120 Hz to sensitize the sequence to high gamma oscillations present in epileptogenic tissue. Phase cycling was applied to capture distributed current orientations. Voxel-wise subtraction of SL-off from SL-on images enabled the separation of T2* effects from rotary saturation effects. The topography of PC-SIRS effects was compared with the seizure onset zone at intracranial EEG and with surface IED-related potentials. Bayesian statistics were used to test whether prior PC-SIRS information could improve IED source reconstruction. Results Nonhemodynamic resonant saturation effects ipsilateral to the seizure onset zone were detected in six of eight patients (concordance rate, 0.75; 95% confidence interval: 0.40, 0.94) by means of the PC-SIRS technique. They were concordant with IED surface negativity in seven of eight patients (0.88; 95% confidence interval: 0.51, 1.00). Including PC-SIRS as prior information improved the evidence of the standard EEG source models compared with the use of uninformed reconstructions (exceedance probability, 0.77 vs 0.12; Wilcoxon test of model evidence, P < .05). Nonhemodynamic resonant saturation effects resolved in patients with favorable postsurgical outcomes, but persisted in patients with postsurgical seizure recurrence. Conclusion Nonhemodynamic resonant saturation effects are detectable during interictal periods with the PC-SIRS approach in patients with epilepsy. The method may be useful for MR imaging-based detection of neuronal currents in a clinical environment. (©) RSNA, 2016 Online supplemental material is available for this article.

Dielectrophoretic approaches to sample preparation and analysis

Dielectrophoresis (DEP) has been used to manipulate cells in low-conductivity suspending media using AC electrical fields generated on micro-fabricated electrode arrays. This has created the possibility of performing automatically on a micro-scale more sophisticated cell processing than that currently requiring substantial laboratory equipment, reagent volumes, time, and human intervention. In this research the manipulation of aqueous droplets in an immiscible, low-permittivity suspending medium is described to complement previous work on dielectrophoretic cell manipulation. Such droplets can be used as carriers not only for air- and water-borne samples, contaminants, chemical reagents, viral and gene products, and cells, but also the reagents to process and characterize these samples. A long-term goal of this area of research is to perform chemical and biological assays on automated, micro-scaled devices at or near the point-of-care, which will increase the availability of modern medicine to people who do not have ready access to large medical institutions and decrease the cost and delays associated with that lack of access. In this research I present proofs-of-concept for droplet manipulation and droplet-based biochemical analysis using dielectrophoresis as the motive force. Proofs-of-concept developed for the first time in this research include: (1) showing droplet movement on a two-dimensional array of electrodes, (2) achieving controlled dielectric droplet injection, (3) fusing and reacting droplets, and (4) demonstrating a protein fluorescence assay using micro-droplets. ^

Preservice Teacher Preparation in Meeting the Needs of Gifted and Other Academically Diverse Students

The issue of how to respond to the diverse academic needs of students is one of the central challenges of teaching. This project studied how preservice teachers develop an awareness of the needs of academically diverse learners and how they intend to implement and/or modify instruction to meet those needs. Participants all came from one university. As part of the design of the study, the participants were surveyed to investigate (a) their attitudes and beliefs towards academically diverse learners; (b) the teaching practices they would utilize in response to academic diversity in their classrooms; and (c) the confidence they have in their abilities to identify and address these various needs in their classrooms. Several strategies including activities to enhance creativity, cooperative learning, individual instruction, problem-solving activities, and projects were considered noteworthy for the ratings by the preservice teachers as appropriate for all students. Small differences were found based on the preservice teachers' year of placement in the School of Education, indicating that as students progress through this program, they may learn more about different techniques and when and for whom they are appropriate; however, differences across groups were not statistically significant. Results also indicated that across the different years in the program, preservice teachers did not have very high or very low confidence in addressing these issues in their own classrooms. Each grouping fell around the middle level of confidence.

Risk of adult-onset asthma in Mexican-American women employed in food preparation or food service

Existing literature examining the association between occupation and asthma has not been adequately powered to address this question in the food preparation or food service industries. Few studies have addressed the possible link between occupational exposure to cooking fumes and asthma. This secondary analysis of cohort study data aimed to investigate the association between adult-onset asthma and exposure to: (a) cooking fumes at work or (b) longest-held employment in food preparation or food service (e.g. waiters and waitresses, food preparation workers, non-restaurant food servers, etc.). Participants arose from a cohort of Mexican-American women residing in Houston, TX, recruited between July 2001 and June 2007. This analysis used Cox proportional-hazards regression to estimate the hazard ratio of adult-onset asthma given the exposures of interest, adjusting for age, BMI, smoking status, acculturation, and birthplace. We found a strong association between adult-onset asthma and occupational exposure to cooking fumes (hazard ratio [HR] = 1.77; 95% confidence interval [CI], 1.15, 2.72), especially in participants whose longest-held occupation was not in the food-related industry (HR = 2.12; 95% CI, 1.21, 3.60). In conclusion, adult-onset asthma is a serious public health concern for food industry workers. ^

The relationship between food preparation time, time spent grocery shopping, and BMI

Recent data have shown that the percentage of time spent preparing food has decreased during the past few years, and little information is know about how much time people spend grocery shopping. Food that is pre-prepared is often higher in calories and fat compared to foods prepared at home from scratch. It has been suggested that, because of the higher energy and total fat levels, increased consumption of pre-prepared foods compared to home-cooked meals can lead to weight gain, which in turn can lead to obesity. Nevertheless, to date no study has examined this relationship. The purpose of this study is to determine (i) the association between adult body mass index (BMI) and the time spent preparing meals, and (ii) the association between adult BMI and time spent shopping for food. Data on food habits and body size were collected with a self-report survey of ethnically diverse adults between the ages of 17 and 70 at a large university. The survey was used to recruit people to participate in nutrition or appetite studies. Among other data, the survey collected demographic data (gender, race/ethnicity), minutes per week spent in preparing meals and minutes per week spent grocery shopping. Height and weight were self-reported and used to calculate BMI. The study population consisted of 689 subjects, of which 276 were male and 413 were female. The mean age was 23.5 years, with a median age of 21 years. The fraction of subjects with BMI less than 24.9 was 65%, between 25 and 29.9 was 26%, and 30 or greater was 9%. Analysis of variation was used to examine associations between food preparation time and BMI. ^ The results of the study showed that there were no significant statistical association between adult healthy weight, overweight and obesity with either food preparation time and grocery shopping time. Of those in the sample who reported preparing food, the mean food preparation time per week for the healthy weight, overweight, and obese groups were 12.8 minutes, 12.3 minutes, and 11.6 minutes respectively. Similarly, the mean weekly grocery shopping for healthy, overweight, and obese groups were 60.3 minutes per week (8.6min./day), 61.4 minutes (8.8min./day), and 57.3 minutes (8.2min./day), respectively. Since this study was conducted through a University campus, it is assumed that most of the sample was students, and a percentage might have been utilizing meal plans on campus, and thus, would have reported little meal preparation or grocery shopping time. Further research should examine the relationships between meal preparation time and time spent shopping for food in a sample that is more representative of the general public. In addition, most people spent very little time preparing food, and thus, health promotion programs for this population need to focus on strategies for preparing quick meals or eating in restaurants/cafeterias. ^