Diagramming the interior

Mark Taylor's new essay assesses the impact of the diagram on interior design from the late 19th century to the present. Taylor identifies the pop-cultural discourse of advice writing in both books and magazines as a starting point for his analysis. Drawing on diverse sources, his analysis focuses on texts relating to the dynamics of use and flexibility by Catherine Beecher, Harriet Beecher Stowe, Melusina Fay Peirce, Mary Haweis and Christine Frederick among others. The examples in these texts use the home, domestic housekeeping and kitchens as the sites and practices of intervention through which interior design innovations can be enacted. Taylor's analysis identified the innovations in both the social and the political aspects of space and the critique of static space behind these seemingly amateurish and innocuous texts. Identifying these contributions as early precursors of Modernism's open-plan and flexible, dynamic spaces, Taylor also interprets them with a critical concern for the oppositions and hierarchies that can exist in spatial design, and which are the hallmarks of recent Postmodern, phenomenological approaches to interior design and its theorisations. The progressive and subversive "paradigms for living" implicit in these diagrams can be argued to present a model of greater economic, social and political equality as well as representing a more balanced set of power relations in the home. Progressing through the 20th century to the present, Taylor's analysis shifts byond the dressed body and on to the more intimate rituals of the revealed body to further examine how diagrams of the interior, and the interior as a set of diagrams, are also mediators, sites and grounds for the design of social and sexual intimacy. Through a consideration of the link between design, indentity and intimacy (whether of the invisible, fashioned or sexualised body), the diagrms of interiors are reconfigured as radical and critical tools for an animate, material and emancipatory "redressing" of the balance between the body, identity, sexuality, gender, function, mis(use), aesthetics and the interior.

Hungry 24/7? HCI design for sustainable food culture workshop

This workshop proposes to explore new approaches to cultivate and support sustainable food culture in urban environments via human computer interaction design and ubiquitous technologies. Food is a challenging issue in urban contexts: while food consumption decisions are made many times a day, most food interaction for urbanites occurs based on convenience and habitual practices. This situation is contrasting to the fact that food is at the centre of global environment, health, and social issues that are becoming increasingly immanent and imminent. As such, it is timely and crucial to ask: what are feasible, effective, and innovative ways to improve human-food-interaction through human-computer-interaction in order to contribute to environmental, health, and social sustainability in urban environments? This workshop brings together insights across disciplines to discuss this question, and plan and promote individual, local, and global change for sustainable food culture.

Object-centric process models and the design of flexible processes

Mainstream business process modelling techniques promote a design paradigm wherein the activities to be performed within a case, together with their usual execution order, form the backbone of a process model, on top of which other aspects are anchored. This paradigm, while eective in standardised and production-oriented domains, shows some limitations when confronted with processes where case-by-case variations and exceptions are the norm. In this thesis we develop the idea that the eective design of exible process models calls for an alternative modelling paradigm, one in which process models are modularised along key business objects, rather than along activity decompositions. The research follows a design science method, starting from the formulation of a research problem expressed in terms of requirements, and culminating in a set of artifacts that have been devised to satisfy these requirements. The main contributions of the thesis are: (i) a meta-model for object-centric process modelling incorporating constructs for capturing exible processes; (ii) a transformation from this meta-model to an existing activity-centric process modelling language, namely YAWL, showing the relation between object-centric and activity-centric process modelling approaches; and (iii) a Coloured Petri Net that captures the semantics of the proposed meta-model. The meta-model has been evaluated using a framework consisting of a set of work ow patterns. Moreover, the meta-model has been embodied in a modelling tool that has been used to capture two industrial scenarios.

Design of automatic vision-based inspection system for solder joint segmentation

Purpose: Computer vision has been widely used in the inspection of electronic components. This paper proposes a computer vision system for the automatic detection, localisation, and segmentation of solder joints on Printed Circuit Boards (PCBs) under different illumination conditions. Design/methodology/approach: An illumination normalization approach is applied to an image, which can effectively and efficiently eliminate the effect of uneven illumination while keeping the properties of the processed image the same as in the corresponding image under normal lighting conditions. Consequently special lighting and instrumental setup can be reduced in order to detect solder joints. These normalised images are insensitive to illumination variations and are used for the subsequent solder joint detection stages. In the segmentation approach, the PCB image is transformed from an RGB color space to a YIQ color space for the effective detection of solder joints from the background. Findings: The segmentation results show that the proposed approach improves the performance significantly for images under varying illumination conditions. Research limitations/implications: This paper proposes a front-end system for the automatic detection, localisation, and segmentation of solder joint defects. Further research is required to complete the full system including the classification of solder joint defects. Practical implications: The methodology presented in this paper can be an effective method to reduce cost and improve quality in production of PCBs in the manufacturing industry. Originality/value: This research proposes the automatic location, identification and segmentation of solder joints under different illumination conditions.

Blogs, wikis and podcasts : collaborative knowledge building tools in a design and technology course

Design and Technology has become an important part of the school curriculum. In Queensland, Australia, Technology (which encompasses Design) is one of the Key Learning Areas (KLAs) for students in the first ten years of schooling. This KLA adopts a student-centred, hands-on constructivist approach to teaching and learning. The ability to conceptualise and implement appropriate learning experiences, however, has been a challenge for some early career teachers. This paper describes how Design and Technology is being taught to pre-service primary teachers at an Australian University through their involvement in a range of authentic problem-solving activities supported by social learning tools such as wikis and blogs. An interview with a sample from this group (N=5) provides an insight into how these social software tools enhanced their knowledge and learning. This paper will describe how these social learning tools impact on the agency of learning.

Professional education in built environment and design

Early and rich conversations with a range of stakeholders – academics, professionals and graduates in their early years of practice – quickly clarified that the singular challenge for most parties centres on the ways in which courses prepare graduates for the pace, diversity and flux of contemporary professional practice.---------In pursuing understanding of this central challenge this study has focused on new graduates in BED disciplines by canvassing their views and those of two other major stakeholder groups (academic staff and professional practitioners in the disciplines studied). The first crucial years of a young graduate’s life in the workforce are shaped by a number of factors including the quality of the transition-to-work experience. The quality of this life-shaping transition is dependent on a range of factors including the ways in which graduates are educated in universities, their personal developmental characteristics and those of the professional people around them and the preparedness of workplaces and other professional groups to guide new recruits through the transition experience. This study makes recommendations about how the variations in transition experience, resulting from the vagaries of all these factors across a range of worksites, may be better understood, perhaps normalised, and, at least, supported. . Early and rich conversations with a range of stakeholders – academics, professionals and graduates in their early years of practice – quickly clarified that the singular challenge for most parties centres on the ways in which courses prepare graduates for the pace, diversity and flux of contemporary professional practice. The study proceeded through literature review, focus group interviews, national online survey and workshops. Through all these methods a number of challenges and factors essential to the transition experience, and the quality of education which precedes it, were identified. Firstly the study found further evidence of the importance of higher-order graduate capabilities, namely, the development of judgment, critical enquiry and strategic thinking. Alongside these capabilities the importance of the development of emotional intelligence, particularly interpersonal and social skills, was stressed by all stakeholders. At the time of writing the global economic crisis was providing challenges to the sector and its young graduates. This phenomenon proved the value of the development of resilience and persistence in graduates, the education system was called upon by all stakeholders as a place where the future-proofing of neophytes would ensure that the unknown challenges of the future could also be confronted. The study found that the challenges of transition to work are best supported by authentic undergraduate experiences both on and off campus, inside and outside classrooms, and that commencing professional life is made easier for new graduates when university courses and workplace settings develop, sustain and support high standards and high expectations of students. All these findings indicate the importance of stakeholder expectations, roles and responsibilities in respect of the transition-to-work experience. Whilst full agreement about how these things should occur is not necessary, a process (amongst stakeholders) which seeks value alignment around transition through discussion, debate and agenda-setting would probably assist to address what is seen as a major challenge in built environment and design education.

An adolescent injury intervention : selecting targeted behaviours with implications for program design and evaluation

Objectives: This paper sought to identify the behaviour change targets for an injury prevention program; Skills for Preventing Injury in Youth, SPIY. The aim was to explore how such behaviours could subsequently be implemented and evaluated in the program. Methods and Design: The quantitative procedure involved a survey with 267 Year 8 and 9 students (mean age 13.23 years) regarding their engagement in risk-taking behaviours that may lead to injury. The qualitative study involved 30 students aged 14 to 17 years reporting their experiences of injury and risk-taking. Results: Injury risk behaviours co-occurred among three-quarters of those who reported engaging in any alcohol use or transport or violence related injury risk behaviour. Students described in detail some of these experiences. Conclusions: The selection process of identifying target behaviours for change for an injury prevention program is described. Adolescents’ description of such risk behaviours can inform the process of operationalising and contextualising program content and deciding on evaluation methodology. The design of an effective injury prevention program involves considerable preparatory work and this paper was able to describe the process of identifying the behavioural targets for change that can be operationalised and evaluated in the injury prevention program, SPIY.

Computational fluid dynamics for improved bioreactor design and 3D culture

The complex relationship between the hydrodynamic environment and surrounding tissues directly impacts on the design and production of clinically useful grafts and implants. Tissue engineers have generally seen bioreactors as 'black boxes' within which tissue engineering constructs (TECs) are cultured. It is accepted that a more detailed description of fluid mechanics and nutrient transport within process equipment can be achieved by using computational fluid dynamics (CFD) technology. This review discusses applications of CFD for tissue engineering-related bioreactors -- fluid flow processes have direct implications on cellular responses such as attachment, migration and proliferation. We conclude that CFD should be seen as an invaluable tool for analyzing and visualizing the impact of fluidic forces and stresses on cells and TECs.

Fashion manufacturing in New Zealand : can design contribute to a sustainable fashion Industry?

In the late 1990s New Zealand fashion gained some international recognition for its dark edginess and intellectual connection due to its colonial past (Molloy, 2004). In the years since, this momentum seems to have dissipated as local fashion companies have followed a global trend towards inexpensive off shore manufacturing. The transfer of the making of garments to overseas workers appears to have resulted in a local fashion scene where many garments look the same in style, colour, cut and fit. The excitement of the past, where the majority of fashion designers established their own individuality through the cut and shape of the garments that they produced, may have been inadvertently lost. Consequently a sustainable New Zealand fashion and manufacturing industry, with design integrity, seems further out of reach. The first question posed by this research project is, ‘can the design and manufacture of a fashion garment, bearing in mind certain economic and practical restrictions at its inception, result in the development of a distinctive ‘look’ or ‘handwriting’?’ Second, through development of a collection of prototypes, can potential garments be created to be sustainably manufactured in New Zealand?

SCAPE sustainable urban design simulation

SCAPE is an interactive simulation that allows teachers and students to experiment with sustainable urban design. The project is based on the Kelvin Grove Urban Village, Brisbane. Groups of students role play as political, retail, elderly, student, council and builder characters to negotiate on game decisions around land use, density, housing types and transport in order to design a sustainable urban community. As they do so, the 3D simulation reacts in real time to illustrate what the village would look like as well as provide statistical information about the community they are creating. SCAPE brings together education, urban professional and technology expertise, helping it achieve educational outcomes, reflect real-world scenarios and include sophisticated logic and decision making processes and effects.---------- The research methodology was primarily practice led underpinned by action research methods resulting in innovative approaches and techniques in adapting digital games and simulation technologies to create dynamic and engaging experiences in pedagogical contexts. It also illustrates the possibilities for urban designers to engage a variety of communities in the processes, complexities and possibilities of urban development and sustainability.

Curriculum design innovation in flexible science teaching

In this paper you will be introduced to a number of principles which can be used to inform good teaching practice and rigorous curriculum design. Principles relate to: * Application of a common sequence of events for how learners learn; * Accommodating different learning styles; * Adopting a purposeful approach to teaching and learning; * Using assessment as a central driving force in the curriculum and as an organising structure leading to coherence of teaching and learning approach; and * The increasing emphasis that is being placed on the development of generic graduate competencies over and above discipline content knowledge. The principles are particularly significant in relation to adult learning. The paper will use three specific applications as illustrations to help you to learn how these principles can be applied. The illustrations are taken from a second year subject in supercomputing that uses scientific case studies. The subject has been developed (with support from Silicon Graphics Inc. and Intel) to be taught entirely via the Internet.

What are students' understandings of how digital tools contribute to learning in design disciplines?

Building Information Modelling (BIM) is evolving in the Construction Industry as a successor to CAD. CAD is mostly a technical tool that conforms to existing industry practices, however BIM has the capacity to revolutionise industry practice. Rather than producing representations of design intent, BIM produces an exact Virtual Prototype of any building that in an ideal situation is centrally stored and freely exchanged between the project team, facilitating collaboration and allowing experimentation in design. Exposing design students to this technology through their formal studies allows them to engage with cutting edge industry practices and to help shape the industry upon their graduation. Since this technology is relatively new to the construction industry, there are no accepted models for how to “teach” BIM effectively at university level. Developing learning models to enable students to make the most out of their learning with BIM presents significant challenges to those teaching in the field of design. To date there are also no studies of students experiences of using this technology. This research reports on the introduction of Building Information Modeling (BIM) software into a second year Bachelor of Design course. This software has the potential to change industry standards through its ability to revolutionise the work practices of those involved in large scale design projects. Students’ understandings and experiences of using the software in order to complete design projects as part of their assessment are reported here. In depth semi-structured interviews with 6 students revealed that students had views that ranged from novice to sophisticate about the software. They had variations in understanding of how the software could be used to complete course requirements, to assist with the design process and in the workplace. They had engaged in limited exploration of the collaborative potential of the software as a design tool. Their understanding of the significance of BIM for the workplace was also variable. The results indicate that students are beginning to develop an appreciation for how BIM could aid or constrain the work of designers, but that this appreciation is highly varied and likely to be dependent on the students’ previous experiences of working in a design studio environment. Their range of understandings of the significance of the technology is a reflection of their level of development as designers (they are “novice” designers). The results also indicate that there is a need for subjects in later years of the course that allow students to specialise in the area of digital design and to develop more sophisticated views of the role of technology in the design process. There is also a need to capitalise on the collaborative potential inherent in the software in order to realise its capability to streamline some aspects of the design process. As students become more sophisticated designers we should explore their understanding of the role of technology as a design tool in more depth in order to make recommendations for improvements to teaching and learning practice related to BIM and other digital design tools.