Redes Interorganizacionais: um estudo sobre partilha e utilização do conhecimento em organizações da Rede Associativa Empresarial da Região Centro de Portugal

Tese de doutoramento em Psicologia, na especialidade de Psicologia das Organizações, do Trabalho e dos Recursos Humanos

Análisis de distribución de tensiones asociada a la utilización de implantes ortopédicos de materiales superelásticos en el tratamiento de deficiencias óseas.

Durante el desarrollo de un niño pueden ocurrir diversas anomalías y distorsiones en el crecimiento de los huesos que resultan en distintos problemas. Independientemente de las razones por las que ocurren, si son detectadas y tratadas con tiempo sus secuelas pueden ser minimizadas o eliminadas. Este trabajo continúa el proyecto integrador de ingeniería mecánica del ingeniero Matías Korten. En ese trabajo se realizaron ensayos termomecánicos a alambres de NiTi para caracterizar las fuerzas desarrolladas y la influencia de diferentes parámetros geométricos y físicos en las mismas. El Dr. J. Groiso propone la fabricación de un dispositivo pseudoelástico y biocompatible de NiTi para corregir deformaciones angulares en huesos. En este trabajo, se buscó caracterizar nuevamente el material NiTi, validar los resultados obtenidos en ese trabajo y diseñar un dispositivo que permita la caracterización del material de forma más confiable. Se desarrolló un modelo computacional de un hueso en 3D que permite obtener el campo de tensiones sobre la placa de crecimiento al aplicar una fuerza superficial sobre los tornillos. Se analizaron los resultados con distintas formas de aplicación de la fuerza, la zona afectada por la prótesis al cambiar la posición de los tornillos y se hizo un análisis de sensibilidad en el rango (según bibliografía) del módulo de elasticidad de la placa de crecimiento. Se concluye que la aplicación de un dispositivo de NiTi puede generar las tensiones necesarias para impulsar el crecimiento del hueso en la dirección correcta.

Stability of Granular Base Course Materials Containing Bituminous Admixtures

This report concerns the stabilization of three crushed limestones by an ss-1 asphalt emulsion and an asphalt cement, 120-150 penetration. Stabilization is evaluated by marshall stability and triaxial shear tests. Test specimens were compacted by the marshall, standard proctor and vibratory methods. Stabilization is evaluated primarily by triaxial shear tests in which confining pressures of 0 to 80 psi were used. Data were obtained on the angle of internal friction, cohesion, volume change, pore water pressure and strain characteristics of the treated and untreated aggregates. The MOHR envelope, bureau of reclamation and modified stress path methods were used to determine shear strength parameters at failure. Several significant conclusions developed by the authors are as follows: (1) the values for effective angle of internal friction and effective cohesion were substantially independent of asphalt content, (2) straight line MOHR envelopes of failure were observed for all treated stones, (3) bituminous admixtures did little to improve volume change (deformation due to load) characteristics of the three crushed limestones, (4) with respect to pore water characteristics (pore pressures and suctions due to lateral loading), bituminous treatment notably improved only the bedford stone, and (5) at low lateral pressures bituminous treatments increased stability by limiting axial strain. This would reduce rutting of highway bases. At high lateral pressures treated stone was less stable than untreated stone.

Análisis de distribución de tensiones asociada a la utilización de implantes ortopédicos de materiales superelásticos en el tratamiento de deficiencias óseas.

Durante el desarrollo de un niño pueden ocurrir diversas anomalías y distorsiones en el crecimiento de los huesos que resultan en distintos problemas. Independientemente de las razones por las que ocurren, si son detectadas y tratadas con tiempo sus secuelas pueden ser minimizadas o eliminadas. Este trabajo continúa el proyecto integrador de ingeniería mecánica del ingeniero Matías Korten. En ese trabajo se realizaron ensayos termomecánicos a alambres de NiTi para caracterizar las fuerzas desarrolladas y la influencia de diferentes parámetros geométricos y físicos en las mismas. El Dr. J. Groiso propone la fabricación de un dispositivo pseudoelástico y biocompatible de NiTi para corregir deformaciones angulares en huesos. En este trabajo, se buscó caracterizar nuevamente el material NiTi, validar los resultados obtenidos en ese trabajo y diseñar un dispositivo que permita la caracterización del material de forma más confiable. Se desarrolló un modelo computacional de un hueso en 3D que permite obtener el campo de tensiones sobre la placa de crecimiento al aplicar una fuerza superficial sobre los tornillos. Se analizaron los resultados con distintas formas de aplicación de la fuerza, la zona afectada por la prótesis al cambiar la posición de los tornillos y se hizo un análisis de sensibilidad en el rango (según bibliografía) del módulo de elasticidad de la placa de crecimiento. Se concluye que la aplicación de un dispositivo de NiTi puede generar las tensiones necesarias para impulsar el crecimiento del hueso en la dirección correcta.

Contribution à l’étude des étalements dans les argiles sensibles de la mer de Champlain- Étude des étalements de Casselman (1971) et de Saint-Luc-de-Vincennes (1986)

Ce mémoire décrit, en premier lieu, l’analyse géotechnique et géomorphologique du glissement de 1971 à Casselman, Ontario. Les caractéristiques morphologiques identifiées à l’intérieur de la cicatrice confirment qu’il s’agit d’un étalement. Le sol impliqué est une argile sensible de la mer de Champlain, normalement à légèrement surconsolidée (OCR entre 1,0 et 1,2) dont les indices de liquidité varient entre 1,0 et 2,0. La résistance au cisaillement intacte mesurée au scissomètre de chantier varie entre 50 kPa et 87 kPa. L’argile adopte un comportement anti-écrouissage (perte de 40 % de la résistance en pic) lorsque soumise à des essais de cisaillement non-drainé. Une surface de rupture quasi-horizontale à deux niveaux principaux a été identifiée à partir des sondages au piézocône réalisés à l’intérieur de la cicatrice. Les coefficients de sécurité élevés obtenus à partir de méthodes à l’équilibre limite démontrent que la rétrogression ne peut être expliquée par des méthodes d’analyses conventionnelles. La deuxième partie du mémoire présente l’application numérique du principe de rupture progressive aux étalements de Casselman (1971) et de Saint-Luc-de-Vincennes (1986). Une étude paramétrique a été réalisée afin d’évaluer l’influence de la fragilité du comportement après la résistance en pic du sol, reliée dans l’étude à une épaisseur de bande de cisaillement, ainsi que de la résistance à grande déformation, sur l’initiation et la rétrogression résultant du processus de rupture progressive. Les résultats démontrent que la résistance à grande déformation a très peu d’influence sur l’initiation du processus de rupture progressive, qui est principalement influencé par la fragilité du comportement du sol. Il a aussi été observé que la rétrogression était majoritairement influencée par la résistance à grande déformation.

O coração e o dragão: perspectivas da vida urbana em uma cidade fragmentada

This research aims to study dimensions of urban life in the contemporaneous city. It is an effort to understand the functioning of the contemporary city as an artifact that somehow affects social relations. The study focuses on the limits and possibilities of urbanity in the city today, understanding urbanity as a set of factors that favor wealth, diversity and spontaneity of public life. The research aims to show that cities today tend to criate fragmented urban life into at least one of the three urbanity dimensions: spatial dimension, social and temporal dimension. The study involves the analysis of two public spaces in Fortaleza (Praça do Ferreira and the open urban public spaces of the Centro Cultural Dragão do Mar), using Space Syntax Analysis methods and for Post Occupancy Evaluation procedures. Research shows that temporal dimension of urbanity is limited in the public spaces studied. In Praça do Ferreira, spatial and social dimensions are present, but their effects are limited by the temporal dimension. The Dragão do Mar, on the other hand, the spatial and social dimensions of urban life are more limited and more concentrated in time

Typologie de la flottille chalutière du port de Sète par une méthode de segmentation

This work aims to define a typology of trawler f1eet in Sète, the main fishing harbour along the French Mediterranean coast, using several multivariate analysis methods. The fishing ships taken to account are represented by annual profiles of landing specific compositions. Five fishing strategies have been identified. A segmentation method using symbolic objects allows a formaI characterisation of the different strategies. These strategies are studied according to several general characteristics usually used for management rules elaboration (power, length, ship age). The typological analysis allows to characterise two main exploitation ways, one directed to the catch of a few species (Engraulis encrasicolus, Sardina pilchardus), the other characterised by the exploitation of a great diversity of species. By this way, it is possible to estimate how the catch of low represented species can significantly contribute to the exploitation of a resource.

Hybrid mathematical and informational modeling of beam-to-column connections

The analysis of steel and composite frames has traditionally been carried out by idealizing beam-to-column connections as either rigid or pinned. Although some advanced analysis methods have been proposed to account for semi-rigid connections, the performance of these methods strongly depends on the proper modeling of connection behavior. The primary challenge of modeling beam-to-column connections is their inelastic response and continuously varying stiffness, strength, and ductility. In this dissertation, two distinct approaches—mathematical models and informational models—are proposed to account for the complex hysteretic behavior of beam-to-column connections. The performance of the two approaches is examined and is then followed by a discussion of their merits and deficiencies. To capitalize on the merits of both mathematical and informational representations, a new approach, a hybrid modeling framework, is developed and demonstrated through modeling beam-to-column connections. Component-based modeling is a compromise spanning two extremes in the field of mathematical modeling: simplified global models and finite element models. In the component-based modeling of angle connections, the five critical components of excessive deformation are identified. Constitutive relationships of angles, column panel zones, and contact between angles and column flanges, are derived by using only material and geometric properties and theoretical mechanics considerations. Those of slip and bolt hole ovalization are simplified by empirically-suggested mathematical representation and expert opinions. A mathematical model is then assembled as a macro-element by combining rigid bars and springs that represent the constitutive relationship of components. Lastly, the moment-rotation curves of the mathematical models are compared with those of experimental tests. In the case of a top-and-seat angle connection with double web angles, a pinched hysteretic response is predicted quite well by complete mechanical models, which take advantage of only material and geometric properties. On the other hand, to exhibit the highly pinched behavior of a top-and-seat angle connection without web angles, a mathematical model requires components of slip and bolt hole ovalization, which are more amenable to informational modeling. An alternative method is informational modeling, which constitutes a fundamental shift from mathematical equations to data that contain the required information about underlying mechanics. The information is extracted from observed data and stored in neural networks. Two different training data sets, analytically-generated and experimental data, are tested to examine the performance of informational models. Both informational models show acceptable agreement with the moment-rotation curves of the experiments. Adding a degradation parameter improves the informational models when modeling highly pinched hysteretic behavior. However, informational models cannot represent the contribution of individual components and therefore do not provide an insight into the underlying mechanics of components. In this study, a new hybrid modeling framework is proposed. In the hybrid framework, a conventional mathematical model is complemented by the informational methods. The basic premise of the proposed hybrid methodology is that not all features of system response are amenable to mathematical modeling, hence considering informational alternatives. This may be because (i) the underlying theory is not available or not sufficiently developed, or (ii) the existing theory is too complex and therefore not suitable for modeling within building frame analysis. The role of informational methods is to model aspects that the mathematical model leaves out. Autoprogressive algorithm and self-learning simulation extract the missing aspects from a system response. In a hybrid framework, experimental data is an integral part of modeling, rather than being used strictly for validation processes. The potential of the hybrid methodology is illustrated through modeling complex hysteretic behavior of beam-to-column connections. Mechanics-based components of deformation such as angles, flange-plates, and column panel zone, are idealized to a mathematical model by using a complete mechanical approach. Although the mathematical model represents envelope curves in terms of initial stiffness and yielding strength, it is not capable of capturing the pinching effects. Pinching is caused mainly by separation between angles and column flanges as well as slip between angles/flange-plates and beam flanges. These components of deformation are suitable for informational modeling. Finally, the moment-rotation curves of the hybrid models are validated with those of the experimental tests. The comparison shows that the hybrid models are capable of representing the highly pinched hysteretic behavior of beam-to-column connections. In addition, the developed hybrid model is successfully used to predict the behavior of a newly-designed connection.

Multi-Scale Dynamic Study of Secondary Impact During Drop Testing of Surface Mount Packages

This dissertation focuses on design challenges caused by secondary impacts to printed wiring assemblies (PWAs) within hand-held electronics due to accidental drop or impact loading. The continuing increase of functionality, miniaturization and affordability has resulted in a decrease in the size and weight of handheld electronic products. As a result, PWAs have become thinner and the clearances between surrounding structures have decreased. The resulting increase in flexibility of the PWAs in combination with the reduced clearances requires new design rules to minimize and survive possible internal collisions impacts between PWAs and surrounding structures. Such collisions are being termed ‘secondary impact’ in this study. The effect of secondary impact on board-level drop reliability of printed wiring boards (PWBs) assembled with MEMS microphone components, is investigated using a combination of testing, response and stress analysis, and damage modeling. The response analysis is conducted using a combination of numerical finite element modeling and simplified analytic models for additional parametric sensitivity studies.

Processos Oxidativos Avançados para Remediação de Águas Contaminadas por Pesticidas

Este trabalho teve como objectivo inicial o estudo de processos oxidativos avançados de forma a remediar e tratar águas contaminadas por pesticidas. No entanto, ao longo do trabalho experimental, constatou-se que os produtos resultantes da degradação de pesticidas são muitas vezes mais tóxicos do que os compostos que lhes deram origem e que, por isso, degradar um composto nem sempre é o melhor para o ambiente. Assim, neste trabalho, procurou-se estudar o processo de degradação com o objectivo de minimizar o impacto ambiental dos pesticidas na água e no ambiente em geral. A parte experimental deste trabalho foi dividida em duas etapas, sendo que, em ambas, a voltametria de onda quadrada e a espectrofotometria de UV/Vis foram os métodos de análise utilizados, para acompanhar o processo de fotodegradação. Na primeira etapa estudou-se a relação entre a estrutura química dos pesticidas MCPA, MCPP, 2.4-D e Dicloroprop e a sua fotodegradação. Soluções aquosas dos pesticidas enunciados foram submetidas a irradiação UV/vis, com incrementos variáveis de tempo de irradiação. Os resultados obtidos, nesta etapa, permitiram constatar diferenças na percentagem de degradação dos diferentes pesticidas. Dos pesticidas estudados verificou-se uma maior fotodegradação para o MCPA e MCPP seguido do Dicloroprop e finalmente o 2.4-D que se degradou menos. Os dados obtidos sugerem que a fotodegradação destes pesticidas está intimamente ligada com a estrutura das moléculas. A presença de um maior número de grupos cloro ligados ao anel aromático nos pesticidas 2,4-D e Dicloroprop faz com que estes sejam mais estáveis e por isso se degradam menos que o MCPA e o MCPP. Por outro lado, o facto de o 2,4-D apresentar um potencial de oxidação mais elevado do que o Dicloroprop, faz com que este seja mais difícil de degradar, o que justifica a diferença entre os dois. Desta forma, foi possível concluir que a estrutura dos pesticidas condiciona o processo de degradação, como esperado. Na segunda etapa, estudou-se a estabilização dos pesticidas MCPA e MCPP após encapsulação, com 2-hidroxipropil-β-ciclodextrina (HP-β-CD), em água desionizada e em água do rio. Para tal, submeteram-se as soluções aquosas dos pesticidas com e sem ciclodextrina, a irradiação UV/vis, também com incrementos variáveis de tempo. No caso do MCPA verificou-se que, tanto para água desionizada como para água do rio, que este herbicida encapsulado se degrada bastante menos do que o MCPA livre. O encapsulamento permitiu reduzir quase para metade a taxa de fotodegradação. Assim, confirmou-se que a HP-β-CD permite estabilizar este pesticida, tornando-o mais resistente à fotodegradação. Desta forma, originam-se menos produtos de degradação, os quais podem ser mais tóxicos, e reduz-se de o impacto ambiental deste herbicida. Verificou-se também que o MCPA livre se degrada mais em água do rio do que em água desionizada, provavelmente devido à matéria orgânica presente nesta água, que promove o processo de degradação. No que respeita ao MCPP também se constatou que este herbicida se degrada menos encapsulado do que livre, em água desionizada e em água do rio. Neste caso, conseguiu-se reduzir pouco a taxa de fotodegradação, mas, ainda assim se verifica uma estabilização deste pesticida através do encapsulamento. No entanto, tornou-se mais evidente a estabilização do MCPP após encapsulação em água do rio, já que apresenta uma taxa de fotodegradação menor. Este facto demonstra que a HP-β-CD permite estabilizar também este pesticida, tornando-o mais resistente à fotodegradação, e reduzindo seu impacto ambiental.

Probabilistic design optimization of horizontal axis wind turbine rotors

Considerable interest in renewable energy has increased in recent years due to the concerns raised over the environmental impact of conventional energy sources and their price volatility. In particular, wind power has enjoyed a dramatic global growth in installed capacity over the past few decades. Nowadays, the advancement of wind turbine industry represents a challenge for several engineering areas, including materials science, computer science, aerodynamics, analytical design and analysis methods, testing and monitoring, and power electronics. In particular, the technological improvement of wind turbines is currently tied to the use of advanced design methodologies, allowing the designers to develop new and more efficient design concepts. Integrating mathematical optimization techniques into the multidisciplinary design of wind turbines constitutes a promising way to enhance the profitability of these devices. In the literature, wind turbine design optimization is typically performed deterministically. Deterministic optimizations do not consider any degree of randomness affecting the inputs of the system under consideration, and result, therefore, in an unique set of outputs. However, given the stochastic nature of the wind and the uncertainties associated, for instance, with wind turbine operating conditions or geometric tolerances, deterministically optimized designs may be inefficient. Therefore, one of the ways to further improve the design of modern wind turbines is to take into account the aforementioned sources of uncertainty in the optimization process, achieving robust configurations with minimal performance sensitivity to factors causing variability. The research work presented in this thesis deals with the development of a novel integrated multidisciplinary design framework for the robust aeroservoelastic design optimization of multi-megawatt horizontal axis wind turbine (HAWT) rotors, accounting for the stochastic variability related to the input variables. The design system is based on a multidisciplinary analysis module integrating several simulations tools needed to characterize the aeroservoelastic behavior of wind turbines, and determine their economical performance by means of the levelized cost of energy (LCOE). The reported design framework is portable and modular in that any of its analysis modules can be replaced with counterparts of user-selected fidelity. The presented technology is applied to the design of a 5-MW HAWT rotor to be used at sites of wind power density class from 3 to 7, where the mean wind speed at 50 m above the ground ranges from 6.4 to 11.9 m/s. Assuming the mean wind speed to vary stochastically in such range, the rotor design is optimized by minimizing the mean and standard deviation of the LCOE. Airfoil shapes, spanwise distributions of blade chord and twist, internal structural layup and rotor speed are optimized concurrently, subject to an extensive set of structural and aeroelastic constraints. The effectiveness of the multidisciplinary and robust design framework is demonstrated by showing that the probabilistically designed turbine achieves more favorable probabilistic performance than those of the initial baseline turbine and a turbine designed deterministically.

An examination of factors that influence entrepreneurial intention of high school students in Kenya

Abstract Considerable research has been carried out on entrepreneurship in efforts to understand its incidence in order to influence and maximize its benefits. Essentially, researchers and policy makers have sought to understand the link between individuals and business creation: Why some people start businesses while others do not. The research indicates that personality traits, individual background factors and association of entrepreneurship with career choice and small business enterprises, cannot sufficiently explain entrepreneurship. It is recognized that entrepreneurship is an intentional process and based on Ajzen’s Theory of Planned Behavior, the most defining characteristic of entrepreneurship is the intention to start a business. The purpose of this study was, therefore, to examine factors that influence entrepreneurial intention in high school students in Kenya. Specifically, the study aimed at determining if there were relationships between the perceptions of desirability, and feasibility of entrepreneurship with entrepreneurial intention of the students, identifying any difference in these perceptions with students of different backgrounds, and developing a model to predict entrepreneurship in the students. The study, therefore, tested how well Ajzen’s Theory of Planned Behavior applied in the Kenyan situation. A questionnaire was developed and administered to 969 final year high school students at a critical important point in their career decision making. Participants were selected using a combined convenience and random sampling technique, considering gender, rural/urban location, cost, and accessibility. Survey was the major method of data collection. Data analysis methods included descriptive statistics, correlation, ANOVA, factor analysis, effect size, and regression analysis. iii The findings of this study corroborate results from past studies. Attitudes are found to influence intention, and the attitudes to be moderated by individual background factors. Perceived personal desirability of entrepreneurship was found to have the greatest influence on entrepreneurial intention and perceived feasibility the lowest. The study findings also showed that perceived social desirability and feasibility of entrepreneurship contributed to perception of personal desirability, and that the background factors, including gender and prior experience, influenced entrepreneurial intention both directly and indirectly. In addition, based on the literature reviewed, the study finds that entrepreneurship promotion requires reduction of the high small business mortality rate and creation of both entrepreneurs and entrepreneurial opportunities (Kruger, 2000; Shane & Venkataraman, 2000). These findings have theoretical and practical implications for researchers, policy makers, teachers, and other entrepreneurship practitioners in Kenya.

Ecomorfologia de dez espécies de peixes marinhos mais abundantes de Galinhos/RN

Ecomorphology is a science based on the idea that morphological differences among species could be associated with distinct biological and environmental pressures suffered by them. These differences can be studied employing morphological and biometric indexes denominated Ecomorphological attributes , representing standards that express characteristics of the individual in relation to its environment, and can be interpreted as indicators of life habits or adaptations suffered due its occupation of different habitats. This work aims to contribute for the knowledge of the ecomorphology of the Brazilian marine ichthyofauna, specifically from Galinhos, located at Rio Grande do Norte state. 10 different species of fish were studied, belonging the families Gerreidae (Eucinostomus argenteus), Haemulidae (Orthopristis ruber,Pomadasyscorvinaeformis,Haemulonaurolineatum,Haemulonplumieri,Haemulonsteindachneri), Lutjanidae (Lutjanus synagris), Paralichthyidae (Syaciummicrurum), Bothidae (Bothus ocellatus) and Tetraodontidae (Sphoeroidestestudineus), which were obtained during five collections, in the period time of September/2004 to April/2005, utilizing three special nets. The ecomorphological study was performed at the laboratory. Eight to ten samples of each fish specie were measured. Fifteen morphological aspects were considered to calculate twelve ecomorphological attributes. Multivariate statistical analysis methods such as Principal Component Analysis (PCA) and Cluster Analysis were done to identify ecmorphological patterns to describe the data set obtained. As results, H.aurolineatumwas the most abundant specie found (23,03%) and S.testudineusthe less one with 0,23%. The 1st Principal component showed variation of 60,03% with influence of the ecomorphological attribute related to body morphology, while the 2nd PC with 23,25% variation had influence of the ecomorphological attribute related to oral morphology. The Cluster Analiysis promoted the identification of three distinct groups Perciformes, Pleuronectiformes and Tetraodontiformes. Based on the obtained data, considering morphological characters differences among the species studied, we suggest that all of them live at the medium (E.argenteus,O.rubber, P.corvinaeformis,H.aurolineatum,H.plumieri,H.steindachneri,L.synagris) and bottom (S.micrurum,B.ocellatus,S.testudineus) region of column water.