Future of the Haze Agreement : is the glass half empty or half full?

"In 1997–98, the ASEAN (Association of Southeast Asian Nations) region suffered an unprecedented health and environmental catastrophe due to choking haze created by a massive forest !re in Indonesia. It is estimated that the total losses from the fire could be US$5–6 billion after taking into account the loss of trees and other natural resources as well as the long-term impact on human health. This unprecedented anthropogenic disaster not only created a severe health and environmental hazard but also raised a question mark about the credibility and effectiveness of the ASEAN regional grouping. Against this background, ASEAN took a number of regional initiatives to try and solve the problem and finally adopted a new treaty for regional cooperation to combat forest fire and haze in 2002. This paper assesses the future success of this agreement from the perspectives of the legal, institutional and geopolitical reality of the region. Since numerous studies have examined state responsibility for transboundary environmental harm under international law and its implications on the ASEAN haze problem, this article will not touch upon that general debate nor the remedies that are possibly available to victim states. Rather, it will focus on the ASEAN regional legal and institutional initiatives to combat the haze pollution and compare them with a similar European regional agreement. Regarding the following analysis, it is important to recognise the uncertainty arising from Indonesia’s status (presently a non-party to the Agreement). A primary indication of the future effectiveness of this agreement can be drawn from an analysis of the principles involved in this agreement, bearing in mind the inherent difficulty of enforcing norms in the international environmental legal system as a whole, and the geopolitical reality of the region."

Damage diagnosis for complex steel truss bridges using multi-layer genetic algorithm

Considerate amount of research has proposed optimization-based approaches employing various vibration parameters for structural damage diagnosis. The damage detection by these methods is in fact a result of updating the analytical structural model in line with the current physical model. The feasibility of these approaches has been proven. But most of the verification has been done on simple structures, such as beams or plates. In the application on a complex structure, like steel truss bridges, a traditional optimization process will cost massive computational resources and lengthy convergence. This study presents a multi-layer genetic algorithm (ML-GA) to overcome the problem. Unlike the tedious convergence process in a conventional damage optimization process, in each layer, the proposed algorithm divides the GA’s population into groups with a less number of damage candidates; then, the converged population in each group evolves as an initial population of the next layer, where the groups merge to larger groups. In a damage detection process featuring ML-GA, as parallel computation can be implemented, the optimization performance and computational efficiency can be enhanced. In order to assess the proposed algorithm, the modal strain energy correlation (MSEC) has been considered as the objective function. Several damage scenarios of a complex steel truss bridge’s finite element model have been employed to evaluate the effectiveness and performance of ML-GA, against a conventional GA. In both single- and multiple damage scenarios, the analytical and experimental study shows that the MSEC index has achieved excellent damage indication and efficiency using the proposed ML-GA, whereas the conventional GA only converges at a local solution.

Impact of recent coastal development and human activities on Nha Trang Bay, Vietnam : evidence from a Porites lutea geochemical record

Nha Trang Bay (NTB) is located on the Central Vietnam coast, western South China Sea. Recent coastal development of Nha Trang City has raised public concern over an increasing level of pollution within the bay and degradation of nearby coral reefs. In this study, multiple proxies (e.g., trace metals, rare earth elements (REEs), and Y/Ho) recorded in a massive Porites lutea coral colony were used to reconstruct changes in seawater conditions in the NTB from 1995 to 2009. A 14-year record of REEs and other trace metals revealed that the concentrations of terrestrial trace metals have increased dramatically in response to an increase in coastal development projects such as road, port, and resort constructions, port and river dredging, and dumping activities since 2000. The effects of such developmental processes are also evident in changes in REE patterns and Y/Ho ratios through time, suggesting that both parameters are critical proxies for marine pollution.

Patient Safety Law: From Silos to Systems

Patient safety has become a significant and pressing policy issue. Around the world, governments, the health care sector and the public are increasingly cognizant of the need to improve the safety of care delivered by their health systems. Pressure for change has been created by highly publicized incidents in a number of countries involving unsafe acts that were significant both in scale and consequence and a number of empirical studies that revealed the high rates of unsafe acts and their consequences. The costs of unsafe health care – both personal and fiscal – to individuals, their families and their communities and to the state are massive. In this research project we explored one particular avenue for change – that is, the use of legal instruments by governments to improve patient safety. We did this through a comparative review of the use of legal instruments or frameworks in other countries (specifically Australia, Denmark, New Zealand, the United Kingdom, and the United States) as well as two non-health care related sectors in Canada (transportation and occupational health and safety). We began this research by reviewing the legal instruments and undertaking extensive literature reviews. Further information was gathered through in-person interviews with policy-makers and academics in the countries studied, and from policy-makers and academics expert in the health, occupational health and safety, and transportation sectors in Canada. Once descriptions of the various countries and sectors were drafted, we held small-group meetings with local experts on particular aspects of patient safety. We then hosted a national consultation meeting. We subsequently drafted this final report and the appendices, which fully describe the results of the background research. Finally, we prepared a summary version of the report as well as posters and papers to be published and delivered at conferences and meetings with relevant groups.

Crossing over : the relationship between overseas Vietnamese and their homeland

This paper deals with the question—what are the effects of displacement on the perceptions diasporic Vietnamese have of their homeland, and of themselves? Identity has become an issue partly because there has frequently been an assumption that identity is somehow seamless, stable and unchanging. Migration highlights the relational and intersubjective nature of identity (see Bhabha, 1990; Hall, 1990). The homeland itself is also a site of constant transformation and negotiation of identities but the translocation of people accentuates the disjuncture between place and identity. When examining the Vietnamese diaspora, identity must be conceived within the locus of power relations that Vietnamese people operate within, both at a local and global level. The efflorescence of an interest in the politics of identity has come about through massive post-war decolonisation and the redrawing of national boundaries. Here, I will scrutinise how these wider relations of power act upon diasporic identities.

One robot, eight hours, and twenty four thousand people

This paper presents an account of an autonomous mobile robot deployment in a densely crowded public event with thousands of people from different age groups attending. The robot operated for eight hours on an open floor surrounded by tables, chairs and massive touchscreen displays. Due to the large number of people who were in close vicinity of the robot, different safety measures were implemented including the use of no-go zones which prevent the robot from blocking emergency exits or moving too close to the display screens. The paper presents the lessons learnt and experiences obtained from this experiment, and provides a discussion about the state of mobile service robots in such crowded environments.

Star performers : task and contextual performance are components, but are they enough?

Identifying outstanding performers or ‘stars’ is a critical component of managing talent. However, organizational effectiveness in this area is limited by the current lack of guidance about the behaviour and characteristics of stars. We address this gap by combining a conceptual analysis with an empirical study involving 174 managers. Conceptually we examine the alignment of managers’ perceptions of outstanding performance with the well established task and contextual performance model and find this framework accounts for a core element in managers’ judgments about outstanding performers. However, a second, more qualitative approach finds that other dimensions including being self-directed, and a willingness to lead are also important. Our findings are consistent with a long-term trend toward identifying work effectiveness with highly discretionary, psychological and behavioural elements, and we consider the implications of this for the study and management of high level, individual effectiveness.

XML clustering and its application to XML transformation

The continuous growth of the XML data poses a great concern in the area of XML data management. The need for processing large amounts of XML data brings complications to many applications, such as information retrieval, data integration and many others. One way of simplifying this problem is to break the massive amount of data into smaller groups by application of clustering techniques. However, XML clustering is an intricate task that may involve the processing of both the structure and the content of XML data in order to identify similar XML data. This research presents four clustering methods, two methods utilizing the structure of XML documents and the other two utilizing both the structure and the content. The two structural clustering methods have different data models. One is based on a path model and other is based on a tree model. These methods employ rigid similarity measures which aim to identifying corresponding elements between documents with different or similar underlying structure. The two clustering methods that utilize both the structural and content information vary in terms of how the structure and content similarity are combined. One clustering method calculates the document similarity by using a linear weighting combination strategy of structure and content similarities. The content similarity in this clustering method is based on a semantic kernel. The other method calculates the distance between documents by a non-linear combination of the structure and content of XML documents using a semantic kernel. Empirical analysis shows that the structure-only clustering method based on the tree model is more scalable than the structure-only clustering method based on the path model as the tree similarity measure for the tree model does not need to visit the parents of an element many times. Experimental results also show that the clustering methods perform better with the inclusion of the content information on most test document collections. To further the research, the structural clustering method based on tree model is extended and employed in XML transformation. The results from the experiments show that the proposed transformation process is faster than the traditional transformation system that translates and converts the source XML documents sequentially. Also, the schema matching process of XML transformation produces a better matching result in a shorter time.

Could MOOCs answer the problems of teaching AQF required skills in Australian tertiary programmes?

From 2015, Australian universities will be required to demonstrate that their programmes explicitly teach, and assess achievement of, knowledge and skills and the application of both as specified by the Australian Qualifications Framework (AQF). Over the last twenty years, the sector has applied significant effort and resource to embedding the development of skills through tertiary programmes. Despite these national and institutional efforts, employer and industry concerns remain about the quality of graduate skills. The authors propose a ‘massive open online course’ (MOOC) approach to teaching and assessing AQF required skills. As an example the paper identifies the skills modules that would need to be developed by experts in each skill area for AQF level 9 master’s by coursework programmes. The proposed MOOC would include assessment tasks and rubrics allowing students to develop and demonstrate achievement of the AQF required skills. The assessment tasks could be used by institutions to provide evidence of attainment of coursework master’s standards.

A grand challenge : reflecting on university science curriculum design, collaborative partnerships and integration of information literacy skills

In 2012, Queensland University of Technology (QUT) committed to the massive project of revitalizing its Bachelor of Science (ST01) degree. Like most universities in Australia, QUT has begun work to align all courses by 2015 to the requirements of the updated Australian Qualifications Framework (AQF) which is regulated by the Tertiary Education Quality and Standards Agency (TEQSA). From the very start of the redesigned degree program, students approach scientific study with an exciting mix of theory and highly topical real world examples through their chosen “grand challenge.” These challenges, Fukushima and nuclear energy for example, are the lenses used to explore science and lead to 21st century learning outcomes for students. For the teaching and learning support staff, our grand challenge is to expose all science students to multidisciplinary content with a strong emphasis on embedding information literacies into the curriculum. With ST01, QUT is taking the initiative to rethink not only content but how units are delivered and even how we work together between the faculty, the library and learning and teaching support. This was the desired outcome but as we move from design to implementation, has this goal been achieved? A main component of the new degree is to ensure scaffolding of information literacy skills throughout the entirety of the three year course. However, with the strong focus on problem-based learning and group work skills, many issues arise both for students and lecturers. A move away from a traditional lecture style is necessary but impacts on academics’ workload and comfort levels. Therefore, academics in collaboration with librarians and other learning support staff must draw on each others’ expertise to work together to ensure pedagogy, assessments and targeted classroom activities are mapped within and between units. This partnership can counteract the tendency of isolated, unsupported academics to concentrate on day-to-day teaching at the expense of consistency between units and big picture objectives. Support staff may have a more holistic view of a course or degree than coordinators of individual units, making communication and truly collaborative planning even more critical. As well, due to staffing time pressures, design and delivery of new curriculum is generally done quickly with no option for the designers to stop and reflect on the experience and outcomes. It is vital we take this unique opportunity to closely examine what QUT has and hasn’t achieved to be able to recommend a better way forward. This presentation will discuss these important issues and stumbling blocks, to provide a set of best practice guidelines for QUT and other institutions. The aim is to help improve collaboration within the university, as well as to maximize students’ ability to put information literacy skills into action. As our students embark on their own grand challenges, we must challenge ourselves to honestly assess our own work.

Review essay : Crime, risk and money : "The Currency of Justice : Fines and Damages in Consumer Societies" and "Crime and Risk", both by Pat O'Malley

Sharing some closely related themes and a common theoretical orientation based on the governmentality analytic, these are nevertheless two very different contributions to criminological knowledge and theory. The first, The Currency of Justice: Fines and Damages in Consumer Societies (COJ), is a sustained and highly original analysis of that most pervasive yet overlooked feature of modern legal orders; their reliance on monetary sanctions. Crime and Risk (CAR), on the other hand, is a short synoptic overview of the many dimensions and trajectories of risk in contemporary debate and practice, both the practices of crime and the governance of crime. It is one of the first in a new series by Sage, 'Compact Criminology', in which authors survey in little more than a hundred pages some current field of debate. With this small gem, Pat O'Malley has set the bar very high for those who follow. For all its brevity, CAR traverses a massive expanse of research, debates and issues, while also opening up new and challenging questions around the politics of risk and the relationship between criminal risk-taking and the governance of risk and crime. The two books draw together various threads of O'Malley's rich body of work on these issues, and once again demonstrate that he is one of the foremost international scholars of risk inside and outside criminology.

Integrating time forgetting mechanisms into topic-based user interest profiling

The rapid development of the World Wide Web has created massive information leading to the information overload problem. Under this circumstance, personalization techniques have been brought out to help users in finding content which meet their personalized interests or needs out of massively increasing information. User profiling techniques have performed the core role in this research. Traditionally, most user profiling techniques create user representations in a static way. However, changes of user interests may occur with time in real world applications. In this research we develop algorithms for mining user interests by integrating time decay mechanisms into topic-based user interest profiling. Time forgetting functions will be integrated into the calculation of topic interest measurements on in-depth level. The experimental study shows that, considering temporal effects of user interests by integrating time forgetting mechanisms shows better performance of recommendation.

The politics of Twitter data

Talk of Big Data seems to be everywhere. Indeed, the apparently value-free concept of ‘data’ has seen a spectacular broadening of popular interest, shifting from the dry terminology of labcoat-wearing scientists to the buzzword du jour of marketers. In the business world, data is increasingly framed as an economic asset of critical importance, a commodity on a par with scarce natural resources (Backaitis, 2012; Rotella, 2012). It is social media that has most visibly brought the Big Data moment to media and communication studies, and beyond it, to the social sciences and humanities. Social media data is one of the most important areas of the rapidly growing data market (Manovich, 2012; Steele, 2011). Massive valuations are attached to companies that directly collect and profit from social media data, such as Facebook and Twitter, as well as to resellers and analytics companies like Gnip and DataSift. The expectation attached to the business models of these companies is that their privileged access to data and the resulting valuable insights into the minds of consumers and voters will make them irreplaceable in the future. Analysts and consultants argue that advanced statistical techniques will allow the detection of ongoing communicative events (natural disasters, political uprisings) and the reliable prediction of future ones (electoral choices, consumption)...

Commercial successes in the music industry

Commercial success in the music industry is obviously related to one’s ability to use musical artisanship as a basis for generating profits and to accumulate substantial wealth. That may seem fairly straightforward, but commercial success is an elusive concept that is continuously negotiated within the industry to determine both what should be considered “success” as well as how it should be measured. This entry discusses commercial success in the popular music industry and strategies used to achieve it.

Imprisoning rationalities

Imprisonment is a growth industry in Australia. Over the past 30–40 years all state and territory jurisdictions have registered massive rises in both the absolute numbers of those imprisoned and the per capita use of imprisonment as a tool of punishment and control. Yet over this period there has been surprisingly little criminological attention to the national picture of imprisonment in Australia and to understanding jurisdictional variation, change and continuity in broader theoretical terms. This article reports initial findings from the Australian Prisons Project, a multi-investigator Australian Research Council funded project intended to trace penal developments in Australia since about 1970. The article begins by outlining the notion of penal culture that provides the analytic lens for the project. It outlines various intersecting areas of study being undertaken before focusing on just three features of the contemporary penal field – restrictions upon presumptions of bail, the rise of post-sentence indefinite detention and the role of supermax confinement. Each in their own way exemplifies an aspect of and contributes to what we conclude to be the revalorization of the prison in Australian culture and society.