Dynamic Response Optimization of Vehicles through Efficient Multibody Formulations and Automatic Differentiation Techniques

El diseño y desarrollo de sistemas de suspensión para vehículos se basa cada día más en el diseño por ordenador y en herramientas de análisis por ordenador, las cuales permiten anticipar problemas y resolverlos por adelantado. El comportamiento y las características dinámicas se calculan con precisión, bajo coste, y recursos y tiempos de cálculo reducidos. Sin embargo, existe una componente iterativa en el proceso, que requiere la definición manual de diseños a través de técnicas “prueba y error”. Esta Tesis da un paso hacia el desarrollo de un entorno de simulación eficiente capaz de simular, analizar y evaluar diseños de suspensiones vehiculares, y de mejorarlos hacia la solución optima mediante la modificación de los parámetros de diseño. La modelización mediante sistemas multicuerpo se utiliza aquí para desarrollar un modelo de autocar con 18 grados de libertad, de manera detallada y eficiente. La geometría y demás características de la suspensión se ajustan a las del vehículo real, así como los demás parámetros del modelo. Para simular la dinámica vehicular, se utiliza una formulación multicuerpo moderna y eficiente basada en las ecuaciones de Maggi, a la que se ha incorporado un visor 3D. Así, se consigue simular maniobras vehiculares en tiempos inferiores al tiempo real. Una vez que la dinámica está disponible, los análisis de sensibilidad son cruciales para una optimización robusta y eficiente. Para ello, se presenta una técnica matemática que permite derivar las variables dinámicas dentro de la formulación, de forma algorítmica, general, con la precisión de la maquina, y razonablemente eficiente: la diferenciación automática. Este método propaga las derivadas con respecto a las variables de diseño a través del código informático y con poca intervención del usuario. En contraste con otros enfoques en la bibliografía, generalmente particulares y limitados, se realiza una comparación de librerías, se desarrolla una formulación híbrida directa-automática para el cálculo de sensibilidades, y se presentan varios ejemplos reales. Finalmente, se lleva a cabo la optimización de la respuesta dinámica del vehículo citado. Se analizan cuatro tipos distintos de optimización: identificación de parámetros, optimización de la maniobrabilidad, optimización del confort y optimización multi-objetivo, todos ellos aplicados al diseño del autocar. Además de resultados analíticos y gráficos, se incluyen algunas consideraciones acerca de la eficiencia. En resumen, se mejora el comportamiento dinámico de vehículos por medio de modelos multicuerpo y de técnicas de diferenciación automática y optimización avanzadas, posibilitando un ajuste automático, preciso y eficiente de los parámetros de diseño. ABSTRACT Each day, the design and development of vehicle suspension systems relies more on computer-aided design and computer-aided engineering tools, which allow anticipating the problems and solving them ahead of time. Dynamic behavior and characteristics are thus simulated accurately and inexpensively with moderate computational times and resources. There is, however, an iterative component in the process, which involves the manual definition of designs in a trialand-error manner. This Thesis takes a step towards the development of an efficient simulation framework capable of simulating, analyzing and evaluating vehicle suspension designs, and automatically improving them by varying the design parameters towards the optimal solution. The multibody systems approach is hereby used to model a three-dimensional 18-degrees-of-freedom coach in a comprehensive yet efficient way. The suspension geometry and characteristics resemble the ones from the real vehicle, as do the rest of vehicle parameters. In order to simulate vehicle dynamics, an efficient, state-of-the-art multibody formulation based on Maggi’s equations is employed, and a three-dimensional graphics viewer is developed. As a result, vehicle maneuvers can be simulated faster than real-time. Once the dynamics are ready, a sensitivity analysis is crucial for a robust optimization. To that end, a mathematical technique is introduced, which allows differentiating the dynamic variables within the multibody formulation in a general, algorithmic, accurate to machine precision, and reasonably efficient way: automatic differentiation. This method propagates the derivatives with respect to the design parameters throughout the computer code, with little user interaction. In contrast with other attempts in the literature, mostly not generalpurpose, a benchmarking of libraries is carried out, a hybrid direct-automatic differentiation approach for the computation of sensitivities is developed, and several real-life examples are analyzed. Finally, a design optimization process of the aforementioned vehicle is carried out. Four different types of dynamic response optimization are presented: parameter identification, handling optimization, ride comfort optimization and multi-objective optimization; all of which are applied to the design of the coach example. Together with analytical and visual proof of the results, efficiency considerations are made. In summary, the dynamic behavior of vehicles is improved by using the multibody systems approach, along with advanced differentiation and optimization techniques, enabling an automatic, accurate and efficient tuning of design parameters.

Propagation of U235-238, Pu239 and STL Nuclear Data Uncertainties for PWR core analysis

An uncertainty propagation methodology based on Monte Carlo method is applied to PWR nuclear design analysis to assess the impact of nuclear data uncertainties in 235,238 U, 239 Pu and Scattering Thermal Library for Hydrogen in water. This uncertainty analysis is compared with the design and acceptance criteria to assure the adequacy of bounding estimates in safety margins.

A vueltas con la última milla

De acuerdo con el Libro Blanco (CE, 2011), la calidad es clave para fomentar el uso del transporte público: horarios convenientes, información adecuada, comodidad, facilidad de acceso, fiabilidad e integración intermodal (todos ellos relacionados con la movilidad puerta a puerta sin discontinuidad) son fundamentales para dicho fin. Los nodos intermodales, como intercambiadores y estaciones son, por tanto, elementos esenciales de las redes de transporte. Sin embargo, no alcanzan en su mayoría la máxima eficiencia en términos de coordinación de la información y modelos de gestión, especialmente cuando en ellos convergen modos de corta y larga distancia. La satisfacción de los clientes es una buena medida del éxito de cualquier servicio, directamente relacionada con el cumplimiento de sus expectativas. Por tanto, los gestores podrían beneficiarse de técnicas de benchmarking basadas en evaluaciones cuantitativas de la calidad realizadas por los propios usuarios, ya que permiten valorar el funcionamiento de los servicios en términos relativos. Sin embargo, comparar directamente el grado de satisfacción del servicio de estaciones, que se encuentran en distintas ciudades e incluso distintos países, puede dar lugar a sesgos y conclusiones erróneas, debido a posibles diferencias culturales.

Task-based telemanipulation for maintenance in large scientific facilities

This thesis presents a task-oriented approach to telemanipulation for maintenance in large scientific facilities, with specific focus on the particle accelerator facilities at European Organization for Nuclear Research (CERN) in Geneva, Switzerland and GSI Helmholtz Centre for Heavy Ion Research (GSI) in Darmstadt, Germany. It examines how telemanipulation can be used in these facilities and reviews how this differs from the representation of telemanipulation tasks within the literature. It provides methods to assess and compare telemanipulation procedures as well a test suite to compare telemanipulators themselves from a dexterity perspective. It presents a formalisation of telemanipulation procedures into a hierarchical model which can be then used as a basis to aid maintenance engineers in assessing tasks for telemanipulation, and as the basis for future research. The model introduces a new concept of Elemental Actions as the building block of telemanipulation movements and incorporates the dependent factors for procedures at a higher level of abstraction. In order to gain insight into realistic tasks performed by telemanipulation systems within both industrial and research environments a survey of teleoperation experts is presented. Analysis of the responses is performed from which it is concluded that there is a need within the robotics community for physical benchmarking tests which are geared towards evaluating the dexterity of telemanipulators for comparison of their dexterous abilities. A three stage test suite is presented which is designed to allow maintenance engineers to assess different telemanipulators for their dexterity. This incorporates general characteristics of the system, a method to compare kinematic reachability of multiple telemanipulators and physical test setups to assess dexterity from a both a qualitative perspective and measurably by using performance metrics. Finally, experimental results are provided for the application of the proposed test suite onto two telemanipulation systems, one from a research setting and the other within CERN. It describes the procedure performed and discusses comparisons between the two systems, as well as providing input from the expert operator of the CERN system.

Comparative analysis of passenger transport sustainability in European cities

Sustainable development in its three dimensions – economic, social and environmental – has become a major concern on an international scale. The problem is global, but must be solved locally. Most of the world’s population lives in cities that act as centres of economic growth and productivity, but which – if they develop in the wrong direction – can cause social inequalities, or irreversibly harm the environment. Urban transport causes a number of negative impacts that can affect sustainability targets. The objective of this study is to propose an analysis of sustainability of urban passenger transport systems based on available indicators in most cities. This will serve to benchmark the practices of different cities and manage their transport systems. This work involves the creation of composite indicators (CI) to measure the sustainability of urban passenger transport systems. The methodology is applied to 23 European cities. The indicators are based on a benchmarking approach, and the evaluation of each aspect in each case therefore depends on the performance of the whole sample. The CI enabled us to identify which characteristics have the greatest influence on the sustainability of a city’s transport system, and to establish transport policies that could potentially improve its shortcomings. Finally, the cities are clustered according to the values obtained from the CIs, and thus according to the weaknesses and strengths of their transport systems.

Code assessment and modelling for Design Basis Accident analysis of the European Sodium Fast Reactor design. Part II: Optimised core and representative transients analysis

The new reactor concepts proposed in the Generation IV International Forum require the development and validation of computational tools able to assess their safety performance. In the first part of this paper the models of the ESFR design developed by several organisations in the framework of the CP-ESFR project were presented and their reliability validated via a benchmarking exercise. This second part of the paper includes the application of those tools for the analysis of design basis accident (DBC) scenarios of the reference design. Further, this paper also introduces the main features of the core optimisation process carried out within the project with the objective to enhance the core safety performance through the reduction of the positive coolant density reactivity effect. The influence of this optimised core design on the reactor safety performance during the previously analysed transients is also discussed. The conclusion provides an overview of the work performed by the partners involved in the project towards the development and enhancement of computational tools specifically tailored to the evaluation of the safety performance of the Generation IV innovative nuclear reactor designs.

A Ground-Truth Video Dataset for the Development and Evaluation of Vision-based Sense-and-Avoid systems

The importance of vision-based systems for Sense-and-Avoid is increasing nowadays as remotely piloted and autonomous UAVs become part of the non-segregated airspace. The development and evaluation of these systems demand flight scenario images which are expensive and risky to obtain. Currently Augmented Reality techniques allow the compositing of real flight scenario images with 3D aircraft models to produce useful realistic images for system development and benchmarking purposes at a much lower cost and risk. With the techniques presented in this paper, 3D aircraft models are positioned firstly in a simulated 3D scene with controlled illumination and rendering parameters. Realistic simulated images are then obtained using an image processing algorithm which fuses the images obtained from the 3D scene with images from real UAV flights taking into account on board camera vibrations. Since the intruder and camera poses are user-defined, ground truth data is available. These ground truth annotations allow to develop and quantitatively evaluate aircraft detection and tracking algorithms. This paper presents the software developed to create a public dataset of 24 videos together with their annotations and some tracking application results.

Eficiencia técnica de centros públicos de educación secundaria

Con el objetivo de analizar la eficiencia técnica de las instituciones públicas nacionales de educación secundaria ubicadas en siete municipios del estado Barinas, se recabó información de dos productos y cuatro insumos del período escolar 2009-2010; según los resultados obtenidos: 1) La función de producción de las instituciones educativas se ajusta a rendimientos variables a escala; 2) Los inputs que influyen en el nivel de eficiencia de una institución educativa son PROF_alum, PERNODOC_alum y ALUM_aul, mientras que el output que refleja el nivel de eficiencia es GRAD5to%; 3) Para ser técnicamente eficientes, las instituciones educativas deben incrementar sus outputs o disminuir los inputs, basándose en técnicas de benchmarking.

Desarrollo de un modelo de evaluación de ciudades basado en el concepto de ciudad inteligente (Smart city)

La presente tesis tiene por finalidad contribuir al conocimiento de los procesos de transformación de las ciudades convencionales en Ciudades Inteligentes o Smart Cities, el nuevo paradigma urbano, que surge como consecuencia de la utilización de las Tecnologías de la Información y de las Comunicaciones, las TIC, para mejorar la calidad de vida de las personas y aumentar la eficiencia y eficacia de los procesos, servicios e infraestructuras de la ciudad. El proceso de urbanización de la población mundial constituye una de las principales tendencias globales. Los retos a los que se enfrentan las urbes actuales para satisfacer las necesidades de sus habitantes, así como la forma en que cada ciudad aborda dichos retos, propician el desarrollo de estudios comparativos y rankings de ciudades. La oportunidad para llevar a cabo esta tesis deriva de: La novedad del concepto de Ciudad Inteligente. La necesidad de establecer estudios comparativos, respecto a dicho concepto, entre ciudades con características socioeconómicas y culturales comunes, dado que la mayoría de los estudios y rankings se desarrollan para conjuntos de ciudades cuyas características son muy dispares, pues, en general son seleccionadas por su condición de capitales de estados o de centros económicos-financieros. El interés de disponer de estudios sobre ciudades con tamaños de población medianos, inferiores al millón de habitantes, las cuales tienen baja presencia en los estudios comparativos. La inexistencia de estudios comparativos entre las ciudades españolas, en relación con el concepto de Ciudad Inteligente. La existencia de la Red Española de Ciudades Inteligentes, que permite disponer de una muestra de ciudades adecuada, para llevar a cabo un estudio comparativo de acuerdo con los puntos anteriores. El objetivo general de la presente tesis es contribuir al conocimiento de los procesos de transformación de la ciudad convencional en Ciudad Inteligente, a través de la formulación y aplicación de un modelo de evaluación, basado en el concepto holístico de Ciudad Inteligente o Smart City y desde la perspectiva del ciudadano. La metodología de trabajo seguida comprende, en primer lugar, la revisión del estado del arte, centrada en tres aspectos: la evolución del concepto Smart City, los estudios comparativos sobre Ciudades Inteligentes y las medidas que las ciudades españolas están implantando en la práctica para llevar a cabo su transformación en Ciudades Inteligentes. A continuación se lleva a cabo el diseño el modelo de evaluación. Este modelo refleja el carácter holístico del concepto de Ciudad Inteligente, para lo cual, de acuerdo con las definiciones que encontramos en la literatura, evalúa la situación de cada ciudad en relación con seis ejes o pilares, comúnmente aceptados por los diferentes autores: e-Gobierno y e-Gobernanza, Movilidad, Sostenibilidad Ambiental, Desarrollo Económico, Capital Intelectual y Calidad de Vida. El trabajo desarrollado implica un análisis, que se desarrolla de forma ordenada para cada uno de los ejes y, dentro de éstos, para sus correspondientes factores. En total se analizan 18 factores. Para cada uno de los ejes se lleva a cabo una revisión de las iniciativas más representativas para, a continuación, analizar y evaluar los correspondientes los factores. De forma complementaria al desarrollo del trabajo, se llevó a cabo una encuesta, dirigida a profesionales de diferentes áreas y sectores, todos ellos en el ámbito de las Ciudades Inteligentes. El objetivo de la encuesta es conocer, de acuerdo con la opinión de los profesionales, la situación actual en materia de despliegue de Ciudades Inteligentes, las actuaciones que consideran de mayor interés para la ciudad y las barreras del proceso de cambio. Una vez definido el modelo, se ha aplicado a las 62 ciudades que forman la Red Española de Ciudades Inteligentes (RECI), valorando los factores y los ejes para cada una de ellas. Así mismo, se ha analizado la influencia de las tres variables siguientes: tamaño de población, densidad de población y presupuesto municipal por habitante, determinando la relación entre el porcentaje de ciudades inteligentes de la muestra, en cada factor. Adicionalmente en el eje Capital Intelectual,se analizó la influencia del porcentaje de habitantes con estudios superiores. Las 62 ciudades RECI que componen la muestra evaluada, representan el 43 % de las ciudades españolas que cuentan con poblaciones superiores a los 50.000 habitantes. La población que abarca la muestra de ciudades estudiada representa el 35% de la población española. Finalmente, se ha determinado el ranking con las ciudades de RECI, de acuerdo con el modelo diseñado. Así mismo se ha llevado a cabo el análisis de sensibilidad, determinado el ranking resultante para la misma muestra de ciudades, aplicando la ponderación de los factores. Las principales aportaciones de la tesis son: Desarrollar un modelo de evaluación de ciudades basada en el concepto holístico de la Smart City y desde la perspectiva del ciudadano. Desarrollar una metodología de trabajo fundamentada en el análisis sistematizado de las web municipales, como medio para conocer la situación de las ciudades, en lugar de los datos estadísticos publicados, que son la fuente de información habitualmente empleada en los estudios comparativos. Disponer de un estudio comparativo específico de ciudades españolas. Llevar a cabo un estudio sobre una muestra de ciudades de tamaño medio, con características socioeconómicas y culturales comparables. Mejorar el conocimiento de los procesos que se están llevando a cabo en ciudades con poblaciones inferiores al millón de habitantes. The purpose of this thesis is to contribute to the knowledge of the cities and the transformation that is taking part in traditional cities becoming Smart Cities. The Smart City concept is the new urban paradigm that is born from the extensive use of Information Technologies (IT) in order to accomplish better citizen’s quality of life as well as improvements in urban processes, services and infrastructures. Several rankings and benchmarking studies are being conducted globally, in response to the increasing of urban population that is taking part around the world and the subsequent challenges to be confronted by the cities. This thesis aims to contribute to these studies. The opportunity for this thesis comes from: The Smart City concept as a new concept. The need of benchmarking studies focused on the Smart City concept, carried on cities with similar social and economic characteristics. The interest on benchmarking studies on medium size cities (with less than one million inhabitants). The absence of benchmarking studies on Spanish cities. The existence of the Spanish Smart Cities Network that can be considered an appropriate sample for a benchmark study. The main goal of this thesis is to develop a Smart Cities assessment model based on the citizen point of view and taking into account a holistic concept of Smart City. The thesis methodology starts with the state of the art revision, focused on three items: the Smart City concept, the benchmark studies and the projects actually developed by the Spanish cities under processes for becoming Smart Cities. The next step is the assessment model design, in accordance with the six main axes or pillars referred in the academic literature: e-Government and e-Governance, Mobility, Environmental Sustainability, Economic Development, Smart Citizens and Quality of Life. Also, a survey has been conducted and addressed to experts working on the different areas related to the Smart Cities. The aim of this survey is to know their opinion about the deployment of the Smart Cities, the priorities considered by the cities and the barriers that delay the change processes. Once the assessment model was ready, it was applied to the Spanish Smart Cities Network, with 62 member cities. Also, the bearing of three variables: city population, population density and city budget per inhabitant, are studied. The 62 cities studied are 43 % of the Spanish cities with population over 50.000 inhabitants. The population living in these cities is the 35% of total Spanish population. The main contribution of this thesis are: An assessment model for Smart Cities that takes into account the holistic concept of the Smart City as well as the citizen experience. A methodology that comprises municipal web analysis instead of statistics data, which are the usual source of data for current benchmarking studies. A Spanish Smart Cities benchmark. A benchmark on medium size cities with similar social and economic characteristics. A better understanding of the urban processes that are taking part on cities under one million inhabitants.

Habilidades auditivas e de linguagem de crianças usuárias de implante coclear: análise dos marcadores clínicos de desenvolvimento

INTRODUÇÃO: Os marcadores clínicos de desenvolvimento possibilitam aos profissionais se familiarizarem com a sequência do desenvolvimento das habilidades auditivas e de linguagem e sinalizarem para a família quando há algum padrão desviante do esperado para o desenvolvimento da criança. O objetivo da presente pesquisa foi determinar os marcadores clínicos de desenvolvimento das habilidades auditivas e de linguagem falada, a partir da análise dos primeiros cinco anos de uso do IC de crianças implantadas antes dos 36 meses; e investigar a influência da idade de implantação no desenvolvimento das habilidades citadas. MÉTODOS: Estudo longitudinal retrospectivo realizado na Seção de Implante Coclear - Centro de Pesquisas Audiológicas (CPA-HRAC/USP). Fizeram parte da amostra 230 crianças que, para análise comparativa, foram dividas em três grupos: operadas e ativadas antes dos 18 meses, entre 19 e 24 meses e entre 25 e 36 meses de idade. Os procedimentos analisados foram: a Infant-Toddler: Meaningful Auditory Integration Scale (IT-MAIS), a Meaningful Use of Speech Scale (MUSS) e as Categorias de Audição e de Linguagem. Os dados coletados foram analisados por meio das estatísticas descritiva e indutiva. RESULTADOS: Durante os primeiros cinco anos de uso do IC foram analisados nove retornos das crianças ao Centro. A partir da análise da mediana, até os 30 ± 3 meses de uso do dispositivo eletrônico grande parte da amostra atingiu 100% na IT-MAIS, quando as habilidades de atenção e de atribuição dos significados aos sons já estavam superadas. Até os 68 ± 6 meses a maioria das crianças alcançou a porcentagem máxima na MUSS e a pontuação máxima nas Categorias de Audição e de Linguagem, ou seja, as crianças já utilizavam a fala espontânea e as estratégias de comunicação em sua rotina, bem como apresentavam as habilidades de reconhecimento auditivo em conjunto aberto e a fluência da linguagem oral, respectivamente. Quando comparados os desempenhos dos grupos, nas avaliações auditivas não houve um padrão de significância estatística e nas avaliações da linguagem os resultados foram significativamente melhores para as crianças implantadas após os 18 meses nos primeiros retornos. Houve fortes correlações entre os resultados das Escalas e Categorias. CONCLUSÕES: As crianças da amostra desenvolveram progressivamente as habilidades auditivas e de linguagem falada ao longo dos primeiros cinco anos de uso do IC. Foi possível determinar os marcadores clínicos de desenvolvimento para as Escalas e Categorias estudadas. A partir deles os profissionais que acompanham a criança no processo de habilitação auditiva, poderão nortear a família, bem como os demais profissionais que atuam com a criança, quanto aos resultados esperados na IT-MAIS, na MUSS e nas Categorias de Audição e Linguagem. Também, foi possível identificar que, mesmo havendo uma restrição quanto as possíveis variáveis que podem interferir na determinação dos marcadores clínicos, houve pacientes com resultados desviantes, sugerindo a importância da definição dos marcadores para, juntamente com a família, o profissional discutir e encontrar outras variáveis que possam influenciar no baixo desempenho da criança. A implantação dentro do período sensível do desenvolvimento pode explicar comportamento auditivo dos grupos quando comparados. Já, quando analisada a linguagem falada, acredita-se que houve a influência de outras variáveis no processo de habilitação auditiva e não apenas a implantação durante o período crítico

Proposta de um modelo de gestão de resíduos industriais para o setor calçadista de Franca-SP com vistas à Política Nacional de Resíduos Sólidos

Criado inicialmente com a função básica de proteção aos pés, o calçado tornou-se um objeto de desejo e um acessório essencial de moda. Entre 1950 a 2015, estima-se que a produção mundial passe de 2,5 bilhões de pares produzidos para 25 bilhões de pares por ano, crescimento bem maior do que a população mundial. O couro, principal matéria-prima para a confecção de calçados, caracteriza-se por gerar grandes quantidades de resíduos ao longo de toda a cadeia produtiva. Especificamente na indústria coureiro-calçadista, o problema concentra-se nos elevados volumes de resíduos gerados na atividade produtiva, podendo causar desperdícios e grandes volumes de resíduos a serem descartados, envolvendo, principalmente, questões financeiras e ambientais. Países como Alemanha e Estados Unidos possuem legislação específica sobre a gestão de resíduos desde os anos 1970. No Brasil, depois de mais de 20 anos de tramitação no Congresso Nacional, em 2010, foi instituída a Política Nacional de Resíduos Sólidos, que reúne princípios, objetivos, instrumentos, diretrizes e metas, que deverão ser adotados pelos governos nas esferas federal, estadual e municipal, bem como pelas empresas com vistas à gestão integrada e ao gerenciamento ambientalmente adequado dos resíduos sólidos. Dessa forma, o objetivo desta tese foi desenvolver um modelo de gestão de resíduos industriais para o setor calçadista de Franca-SP com vistas à Política Nacional de Resíduos Sólidos. O desenvolvimento do modelo teve como ponto de partida um estudo bibliográfico sobre o assunto e, na sequência, por intermédio de uma pesquisa aplicada, conseguiu-se, em um primeiro momento, analisar a situação atual para compreender o modelo de gestão de resíduos vigente e realizar uma pesquisa de diagnóstico dos resíduos industriais do setor. Tal pesquisa possibilitou verificar que atualmente, esses resíduos, são enviados em sua totalidade para aterros sanitários, possibilitou também sua quantificação e cálculos dos custos envolvidos para transporte e destinação. Na sequência, realizaram-se estudos sobre a viabilidade técnica e financeira para tratamento térmico desses resíduos e a busca de benchmark no setor. O estudo também proporcionou uma contribuição de caráter mais prático e/ou gerencial ao recomendar diretrizes para a elaboração de um plano de gestão integrada de resíduos industriais para o setor, e uma proposta de gestão compartilhada dos resíduos industriais entre a entidade de classe e as indústrias calçadistas, com vistas à eliminação de envio desses resíduos para aterros. Dessa forma, contribuiu também para a elaboração do Plano Municipal de Gestão Integrada de Resíduos Sólidos do município em questão. Nesse sentido, após as análises e desdobramentos das etapas anteriores, foi possível propor um modelo de gestão de resíduos industriais, bem como demonstrar sua viabilidade técnica e financeira. Tal modelo foi denominado \"Modelo de Equiparação de Custos com Eficiência Ambiental\".

E-Book Usage on a Global Scale: Patterns, Trends, and Opportunities

This study examines worldwide usage of over 600,000 e-books from Ebook Library (EBL) and ebrary. Using multiple modes of analysis, the study shows that there are variations in usage by geographic region as well as by subject. The study examines usage in relation to availability of titles, different types of usage per session, usage of the top ten percent of titles, and intensive and extensive use. These patterns can be used for benchmarking and as a model for local e-book studies.

Cómo mejorar el PATEC: comparativa de experiencias en universidades públicas españolas

En este curso 2014-2015 se cumplen 10 años del inicio del Programa de Acción Tutorial de la Facultad de Económicas (PATEC). En estos años este programa se ha ido consolidando e incrementando su relevancia en la Facultad y, en especial, a través de su web. Además, este programa se ofrece a todos los alumnos del centro con independencia del curso o la titulación en la que estén matriculados y se diseñan actividades complementarias que contribuyen a la formación integral del alumnado. En este sentido, la experiencia acumulada permite tener una amplia perspectiva para reflexionar sobre cómo debe ser el PATEC en los próximos años. No sólo teniendo en cuenta esta experiencia sino también considerando la organización y funcionamiento de otros programas de acción tutorial que existen en otras universidades españolas. Así, el objetivo de este trabajo es analizar el funcionamiento de programas de acción tutorial implantados en otros centros para identificar las mejores prácticas con el fin de estudiar la posibilidad de introducirlas en el funcionamiento del PATEC. De esta manera podemos reflexionar sobre nuestras prácticas y mejorar la eficiencia del PATEC para ofrecer a todo su alumnado un servicio de calidad adaptado a sus necesidades académicas, profesionales y personales.

Reducing task’s redundancy – the strategy of Faculty of Pharmacy Library to centralize all scientific research

Introduction – Based on a previous project of University of Lisbon (UL) – a Bibliometric Benchmarking Analysis of University of Lisbon, for the period of 2000-2009 – a database was created to support research information (ULSR). However this system was not integrated with other existing systems at University, as the UL Libraries Integrated System (SIBUL) and the Repository of University of Lisbon (Repositório.UL). Since libraries were called to be part of the process, the Faculty of Pharmacy Library’ team felt that it was very important to get all systems connected or, at least, to use that data in the library systems. Objectives – The main goals were to centralize all the scientific research produced at Faculty of Pharmacy, made it available to the entire Faculty, involve researchers and library team, capitalize and reinforce team work with the integration of several distinct projects and reducing tasks’ redundancy. Methods – Our basis was the imported data collection from the ISI Web of Science (WoS), for the period of 2000-2009, into ULSR. All the researchers and indexed publications at WoS, were identified. A first validation to identify all the researchers and their affiliation (university, faculty, department and unit) was done. The final validation was done by each researcher. In a second round, concerning the same period, all Pharmacy Faculty researchers identified their published scientific work in other databases/resources (NOT WoS). To our strategy, it was important to get all the references and essential/critical to relate them with the correspondent digital objects. To each researcher previously identified, was requested to register all their references of the ‘NOT WoS’ published works, at ULSR. At the same time, they should submit all PDF files (for both WoS and NOT WoS works) in a personal area of the Web server. This effort enabled us to do a more reliable validation and prepare the data and metadata to be imported to Repository and to Library Catalogue. Results – 558 documents related with 122 researchers, were added into ULSR. 1378 bibliographic records (WoS + NOT WoS) were converted into UNIMARC and Dublin Core formats. All records were integrated in the catalogue and repository. Conclusions – Although different strategies could be adopted, according to each library team, we intend to share this experience and give some tips of what could be done and how Faculty of Pharmacy created and implemented her strategy.

Could European Governance Ideas Improve Federal-provincial Relations in Canada? EDAP 6/2013

Over the past seventeen years Canada has decentralized many social programmes, moving responsibility from the federal government to 13 provinces and territories through bilateral federal-provincial agreements. In contrast, the European Union (EU) has moved in the opposite direction, building pan-European approaches and establishing new processes to facilitate multilateral collaboration among the 28 EU member states. This has been done through a new governance approach called the Open Method of Coordination (OMC). Using a detailed case study − employment policy − this paper explores whether Canada could learn from OMC governance ideas to re-build a pan-Canadian dimension to employment policy and improve the performance of its intergovernmental relations system. Concrete lessons for Canada to improve decentralized governance are suggested: consolidating the different bilateral agreements; using benchmarking instead of controls in fiscal transfers; undertaking research, analysis, and comparisons in order to facilitate mutual learning; revitalizing intergovernmental structures in light of devolution; and engaging social partners, civil society and other stakeholders. Post-devolution Canada is not doing badly in managing employment policy, but could do better. Looking to the EU for ideas on new ways to collaborate provides a chance for setting a forward looking agenda that could ultimately result not only in better labour market outcomes, but also improvements to one small part of Canada’s often fractious federation.