Novel analytical methodologies for the monitoring of traditional and non-traditional pollutants in different environmental compartments of South Florida

Routine monitoring of environmental pollution demands simplicity and speed without sacrificing sensitivity or accuracy. The development and application of sensitive, fast and easy to implement analytical methodologies for detecting emerging and traditional water and airborne contaminants in South Florida is presented. A novel method was developed for quantification of the herbicide glyphosate based on lyophilization followed by derivatization and simultaneous detection by fluorescence and mass spectrometry. Samples were analyzed from water canals that will hydrate estuarine wetlands of Biscayne National Park, detecting inputs of glyphosate from both aquatic usage and agricultural runoff from farms. A second study describes a set of fast, automated LC-MS/MS protocols for the analysis of dioctyl sulfosuccinate (DOSS) and 2-butoxyethanol, two components of Corexit®. Around 1.8 million gallons of those dispersant formulations were used in the response efforts for the Gulf of Mexico oil spill in 2010. The methods presented here allow the trace-level detection of these compounds in seawater, crude oil and commercial dispersants formulations. In addition, two methodologies were developed for the analysis of well-known pollutants, namely Polycyclic Aromatic Hydrocarbons (PAHs) and airborne particulate matter (APM). PAHs are ubiquitous environmental contaminants and some are potent carcinogens. Traditional GC-MS analysis is labor-intensive and consumes large amounts of toxic solvents. My study provides an alternative automated SPE-LC-APPI-MS/MS analysis with minimal sample preparation and a lower solvent consumption. The system can inject, extract, clean, separate and detect 28 PAHs and 15 families of alkylated PAHs in 28 minutes. The methodology was tested with environmental samples from Miami. Airborne Particulate Matter is a mixture of particles of chemical and biological origin. Assessment of its elemental composition is critical for the protection of sensitive ecosystems and public health. The APM collected from Port Everglades between 2005 and 2010 was analyzed by ICP-MS after acid digestion of filters. The most abundant elements were Fe and Al, followed by Cu, V and Zn. Enrichment factors show that hazardous elements (Cd, Pb, As, Co, Ni and Cr) are introduced by anthropogenic activities. Data suggest that the major sources of APM were an electricity plant, road dust, industrial emissions and marine vessels.

Process inventory and pollution prevention overview for the citrus industry

Florida citrus represents approximately 70 percent of the industry production in the United States; therefore, any associated agricultural and industrial contamination is of concern and a focus of attention. The use of synthetic organic chemicals has become a farmer's necessity in order to supply consumers with high quality products, free of pest damage. However, industrial citrus wastes and chemical residual levels worry not only government agencies but also consumers since they indicate a serious habitat risk. This study assesses citrus industrial processes and the paths that chemical substances follow from the time the citrus seed is planted until consumers get a final product as either fresh fruit or processed product. The study is built on information from United States Environmental Protection Agency (US EPA) manuals, Dade County Environmental Resources Management (DERM) inspection records, United States Food and Drug Administration (US FDA) regulations, Florida standards, journal publications, and research reports. Pollution prevention (P2 or prevention-of-pollution) alternatives are identified; alternatives are proposed, evaluated, and included. Strategies are described and pollution prevention opportunities proposed to minimize citrus wastes generation, chemical residuals in products, their environmental impact and health risk aspects while maximizing product quality.

Esforços governamentais locais para o desenvolvimento: desenhos, tendências e limites dos Fundos de Desenvolvimento Industrial nos estados do Rio Grande do Norte, Maranhão e Ceará (1985-2010)

This research aimed to analyze the main government efforts to promote economic development in the Northeast, from 1985 to 2010, under the view that growth is crucial for increasing industrialization process and allows for more significant growth patterns. The analysis was the context in which state governments react to the abandonment of developmental line the federal level, in the 1980s, incorporating features of the actions called endogenous regional development and providing local players with greater responsibility in the development process. Justifies the need to analyze the following scenario: state governments in northeastern Brazil using relevant part of its resources to finance the installation and expansion of companies through tax incentives, with a view to generating income and employment, whilst waiting for an increase in output and a positive change in economic dynamism. In addition, it puts in question the fact that these policies receive such importance of state administrations for the purpose of achieving regional development. It was left to consider, therefore, the contents of the shares elected by state governments to examine the scope of these policies both in the pattern of growth, the transformation of the industrial sector and the development of the region attention to changes in state production structures. Due to limitations on the availability of data and time to carry out research, we were elected three states for the study: Rio Grande do Norte, Ceará and Maranhão. The study found that, despite the contribution of policies analyzed to economic growth, sub-national states are unable to compensate for the lack of development agencies structured at the federal level.

La stampante 3D DELTA WASP 3MT - Verso la fabbricazione personale

La tesi segue il progetto della Delta WASP 3MT, stampante 3D di grandi dimensioni. Il lavoro parte da una analisi del contesto che incontra i temi dell'artigianato digitale e dell'autoproduzione. Successivamente viene fatta una analisi dei requisiti e delle soluzioni tecniche implementabili sulla macchina per soddisfarli. A questa segue una illustrazione degli interventi sulle varie parti della macchina. Infine si espongono brevemente i punti chiave elaborati per la comunicazione della macchina, dal naming alla strategia nei punti vendita.

Location and ages of terrestrial peatlands located on continental shelves and in coastal sediments

This synthesis dataset contains records of freshwater peat and lake sediments from continental shelves and coastal areas. Information included is site location (when available), thickness and description of terrestrial sediments as well as underlying and overlying sediments, dates (when available), and references.

A pedagogia industrial da FIEMG: um estudo sobre o pensamento empresarial a partir da revista vida industrial (1961-1974)

The present research results of the studies and debates inherent in PhD in Education at the Graduate Program in Education at the Federal University of Uberlândia, belonging to the Research Line "Politics and Knowledge in Education." This thesis aims to analyze the contradictory meaning of education as training human history, specifically educational representative under the logic of the industrial business associated FIEMG (Federation of Industries of the State of Minas Gerais) in the context 1961-1974. This definition is justified by the historical fact that it was a period marked by the cyclical crises of capital and their impacts in the final phase of the industrialization process in Brazil: it starts with one of the apexes of economic growth in the country , driven by national developmental , continues with a severe political crisis in 1966 , also impacting the economic sphere, and finally, with the constant quest for economic stability even under high prices, hatch the factors that led to the Brazilian economy to the context of the "Economic Miracle". For this, it was necessary to link the debate between education and work from the perspective of historical materialism and dialectical their subsidies theoretical-methodological and epistemological. In the first chapter, we designed a "State of the art" category "human formation", conceived as a process of education and history, from the Marxist assumptions, aiming at the reconstruction of concepts and meanings of which is the formation of workers in contradictory logic, the bias of comprehensive training and the prospect of capital accumulation. Then, in the second chapter, we present a review about industrialization, the industrial business and its development perspective 1961-1974. The third chapter was established on a contextualization of the state and its peculiarities, the industrial business and its proposed development both nationally and at the state (Minas Gerais). Finally, in the fourth chapter, was organized dialogue with the sources, from a historical survey of the shares of the industrial business with an emphasis on education, which converged in a pedagogy industrial consolidation in line with the political and economic conditions specific period from 1961 to 1974. It has mailing bibliographic reference business thinking expressed in the concreteness of training workers and industry of Minas Gerais, in agreement with the demands of work and training of mining companies. The thesis of this study is the defense that the corporate actions which constituted pedagogy industrial concepts were articulated to political and economic development in Brazil, since the discipline to work imposed by such conceptions met the human worker training geared to the accumulation the general capital and industrial capital in particular. Establish, therefore, different logics, the state level, the scope of private foreign capital and domestic private capital, which came up the process of capital accumulation, loading, contradictorily, the possibilities of building the human beyond capital, or a teaching job.

Knowledge sources, innovative activity and the performance of UK new technology based firms

We present an innovation value chain analysis for a representative sample of new technology based firms (NTBFs) in the UK. This involves determining which factors lead to the usage of different knowledge sources and the relationships that exist between those sources of knowledge; the effect that each knowledge source has on innovative activity; and how innovation outputs affect the performance of NTBFs. We find that internal (i.e. R&D) and external knowledge sources are complementary for NTBFs, and that supply chain linkages have both a direct and indirect effect on innovation. NTBFs' skill resources matter throughout the innovation value chain, being positively associated with external knowledge linkages and innovation success, and also having a direct effect on growth independent of the effect on innovation. ©2010 IEEE.

Knowledge sources, innovative activity and the performance of UK new technology based firms

We present an innovation value chain analysis for a representative sample of new technology based firms (NTBFs) in the UK. This involves determining which factors lead to the usage of different knowledge sources and the relationships that exist between those sources of knowledge; the effect that each knowledge source has on innovative activity; and how innovation outputs affect the performance of NTBFs. We find that internal (i.e. R&D) and external knowledge sources are complementary for NTBFs, and that supply chain linkages have both a direct and indirect effect on innovation. NTBFs' skill resources matter throughout the innovation value chain, being positively associated with external knowledge linkages and innovation success, and also having a direct effect on growth independent of the effect on innovation. ©2010 IEEE.