Roal Oy:n käyttöhyödykejärjestelmän arviointi, optimointi ja raportointi

Prosessiteollisuudessa tarvitaan usein erilaisia apujärjestelmiä pääprosessin tueksi. Tyypillisiä tällaisia järjestelmiä ovat jäähdytys-, höyry- ja ilmajärjestelmät. Hyödykejärjestelmien kehitys jää helposti pääprosessin varjoon, joka usein johtaa tarpeettoman suuriin hyödykekustannuksiin ja järjestelmien teknisen tilan laskuun. Työn kirjallisuusosassa käsitellään Roal Oy:n fermentointiprosessin kannalta olennaisimpia hyödykevaatimuksia, niiden laskennallista ilmaisua ja vuorovaikutuksia sekä PINCH-menetelmää lämpöenergian hyötykäyttöön. Jäähdytysjärjestelmän osalta käydään läpi merkittävimmät laitetekniset ratkaisut, jäähdytystorni ja lämpöpumppu, toimintaperiaatteineen sekä luonnonvesien käyttö jäähdytykseen. Työn soveltavassa osassa seurattiin Aspergillus, Trichoderma ja Bacillus fermentointeja, joiden pohjalta luotiin kasvatuskohtainen empiirinen malli jäähdytystarpeen arviointiin perustuen sekoitustehoon, kasvatuksen hiilidioksidituottoon ja haihtumisen vaikutukseen. Kasvatuksien aikana seurattiin myös tilavuusperusteista lämmönsiirtokerrointa. Mitattujen lämmönsiirtokertoimien perustella laskettiin ominaislämmöntuottoon perustuva maksimilämpötila käytettävälle jäähdytysvedelle ja fermentorien maksimitilavuudet tunnetuilla kasvatusparametreilla eri lämpöisille jäähdytysvesille. Soveltavassa osassa käydään myös läpi Roalin höyry- ja kuumavesikulutukset ja tärkeimmät käyttökohteet. Mittaustulosten ja mallien perusteella on tehtiin kehitysehdotukset hyödykejärjestelmän optimoimiseksi.

Costs and Benefits of a Shared Digital Long-Term Preservation System

This paper describes the cost-benefit analysis of digital long-term preservation (LTP) that was carried out in the context of the Finnish National Digital Library Project (NDL) in 2010. The analysis was based on the assumption that as many as 200 archives, libraries, and museums will share an LTP system. The term ‘system’ shall be understood as encompassing not only information technology, but also human resources, organizational structures, policies and funding mechanisms. The cost analysis shows that an LTP system will incur, over the first 12 years, cumulative costs of €42 million, i.e. an average of €3.5 million per annum. Human resources and investments in information technology are the major cost factors. After the initial stages, the analysis predicts annual costs of circa €4 million. The analysis compared scenarios with and without a shared LTP system. The results indicate that a shared system will have remarkable benefits. At the development and implementation stages, a shared system shows an advantage of €30 million against the alternative scenario consisting of five independent LTP solutions. During the later stages, the advantage is estimated at €10 million per annum. The cumulative cost benefit over the first 12 years would amount to circa €100 million.

Liiketoimintamalli teollisuuden ylijäämälämmön hyödyntämisestä kaukolämpöverkoissa

Tässä työssä tarkastellaan teollisuuden ylijäämälämmön hyödyntämistä kaukolämpöverkoissa liiketoimintamallin näkökulmasta. Työn tilaaja on YIT Teollisuus Oy, joka haluaa osaltaan olla mukana ratkaisemassa ilmastonmuutoksesta ja hiilidioksidipäästöjen vähentämistarpeista aiheutuvia yhteiskunnan kehitystarpeita. Energiatehokkuuden parantaminen on yksi nopeimmista keinoista vähentää päästöjä. Teollisuuden energiatehokkuutta voidaan parantaa ottamalla talteen sähköntuotannossa ja tuotantoprosesseissa syntyvää ylijäämälämpöä. Aikaisempien tutkimusten perusteella tiedetään, että Suomessa syntyy vuosittain noin 4–6 TWh ylijäämälämpöä, joka voitaisiin hyödyntää jo olemassa olevien kaukolämpöverkkojen välityksellä rakennusten lämmittämiseen. Kuitenkin vuonna 2008 teollisuus myi ylijäämälämpöä kaukolämpöverkkoihin yhteensä vain 770 GWh, mikä vastaa noin 2,5 prosenttia kokonaiskaukolämmön tarpeesta. Tämän työn tuloksena syntyi liiketoimintamalli, joka esittelee ne palvelut, jotka YIT tuottaa asiakkailleen tilanteissa, joissa teollisuudessa syntyvää ylijäämälämpöä hyödynnetään kaukolämpöverkoissa. Jotta liiketoimintamalli toimisi käytännössä, on siitä oltava hyötyä kaikille osapuolille. Asiakkaan on siis voitava kattaa palvelusta ja sen rahoituksesta syntyvät kustannukset myydyn ylijäämälämmön tuotolla (teollisuuslaitos) tai säästyneistä energian hankintakustannuksista (kaukolämpöyhtiö). Eniten ylijäämälämmön käytöstä voivat hyötyä kaukolämpöyhtiöt, joiden tuotannosta korkeintaan pieni osa tulee yhteistuotannosta ja joilla uusiutuvien energialähteiden osuus on vähäinen. Lisäksi kaukolämpöverkon koon vuotuisena kulutuksena mitattuna on oltava riittävän suuri ja kaukolämmön hinnan suhteellisen korkea. Myös alueen ennustettu väestönkasvu ja uudet suunnitteilla olevat asuinalueet saattavat parantaa ylijäämälämmön hyödyntämisen houkuttelevuutta. YIT:n näkökulmasta ylijäämälämmön talteenottoprojektit ovat hyvä lisä sen nykyiseen palvelutarjontaan. Myös yhteiskunnallisella tasolla aihe on merkittävä. Vaikka nykytietämyksen mukaan energian käytön tehostaminen ja päästöttömän tuotannon lisääminen ovat molemmat yhtä merkittäviä keinoja ilmastotavoitteiden saavuttamisen kannalta, panostetaan Suomessa tällä hetkellä lähinnä tuotannon tukemiseen. Lähivuosien poliittiset ratkaisut vaikuttavatkin vahvasti siihen, kuinka paljon tulevaisuudessa ylijäämälämpöä hyödynnetään rakennusten lämmittämisessä.

Forest Biomass Resources and Technological Prospects for the Production of Second-generation Biofuels in Finland by 2020

Introduction of second-generation biofuels is an essential factor for meeting the EU’s 2020 targets for renewable energy in the transport sector and enabling the more ambitious targets for 2030. Finland’s forest industry is strongly involved in the development and commercialising of second-generation biofuel production technologies. The goal of this paper is to provide a quantified insight into Finnish prospects for reaching the 2020 national renewable energy targets and concurrently becoming a large-scale producer of forest biomass based second-generation biofuels feeding the increasing demand in European markets. The focus of the paper is on assessing the potential for utilising forest biomass for liquid biofuels up to 2020. In addition, technological issues related to the production of second-generation biofuels were reviewed. Finland has good opportunities to realise a scenario to meet 2020 renewable energy targets and for large-scale production of wood based biofuels. In 2020, biofuel production from domestic forest biomass in Finland may reach nearly a million ton (40 PJ). With the existing biofuel production capacity (20 PJ/yr) and national biofuel consumption target (25 PJ) taken into account, the potential net export of biofuels from Finland in 2020 would be 35 PJ, corresponding to 2–3% of European demand. Commercialisation of second-generation biofuel production technologies, high utilisation of the sustainable harvesting potential of Finnish forest biomass, and allocation of a significant proportion of the pulpwood harvesting potential for energy purposes are prerequisites for this scenario. Large-scale import of raw biomass would enable remarkably greater biofuel production than is described in this paper.

Optimal trading of wind power in the short term market

The energy reform, which is happening all over the world, is caused by the common concern of the future of the humankind in our shared planet. In order to keep the effects of the global warming inside of a certain limit, the use of fossil fuels must be reduced. The marginal costs of the renewable sources, RES are quite high, since they are new technology. In order to induce the implementation of RES to the power grid and lower the marginal costs, subsidies were developed in order to make the use of RES more profitable. From the RES perspective the current market is developed to favor conventional generation, which mainly uses fossil fuels. Intermittent generation, like wind power, is penalized in the electricity market since it is intermittent and thus diffi-cult to control. Therefore, the need of regulation and thus the regulation costs to the producer differ, depending on what kind of generation market participant owns. In this thesis it is studied if there is a way for market participant, who has wind power to use the special characteristics of electricity market Nord Pool and thus reach the gap between conventional generation and the intermittent generation only by placing bids to the market. Thus, an optimal bid is introduced, which purpose is to minimize the regulation costs and thus lower the marginal costs of wind power. In order to make real life simulations in Nord Pool, a wind power forecast model was created. The simulations were done in years 2009 and 2010 by using a real wind power data provided by Hyötytuuli, market data from Nord Pool and wind forecast data provided by Finnish Meteorological Institute. The optimal bid needs probability intervals and therefore the methodology to create probability distributions is introduced in this thesis. In the end of the thesis it is shown that the optimal bidding improves the position of wind power producer in the electricity market.

Simulation and optimization of IGCC technique for power generation and hydrogen production by using lignite Thar coal and cotton stalk

The purpose of this study was to simulate and to optimize integrated gasification for combine cycle (IGCC) for power generation and hydrogen (H2) production by using low grade Thar lignite coal and cotton stalk. Lignite coal is abundant of moisture and ash content, the idea of addition of cotton stalk is to increase the mass of combustible material per mass of feed use for the process, to reduce the consumption of coal and to increase the cotton stalk efficiently for IGCC process. Aspen plus software is used to simulate the process with different mass ratios of coal to cotton stalk and for optimization: process efficiencies, net power generation and H2 production etc. are considered while environmental hazard emissions are optimized to acceptance level. With the addition of cotton stalk in feed, process efficiencies started to decline along with the net power production. But for H2 production, it gave positive result at start but after 40% cotton stalk addition, H2 production also started to decline. It also affects negatively on environmental hazard emissions and mass of emissions/ net power production increases linearly with the addition of cotton stalk in feed mixture. In summation with the addition of cotton stalk, overall affects seemed to negative. But the effect is more negative after 40% cotton stalk addition so it is concluded that to get maximum process efficiencies and high production less amount of cotton stalk addition in feed is preferable and the maximum level of addition is estimated to 40%. Gasification temperature should keep lower around 1140 °C and prefer technique for studied feed in IGCC is fluidized bed (ash in dry form) rather than ash slagging gasifier

Georeferenced database generation with the purpose of hydrologic molding in reservoirs of the hydrographic basin of Jaguaribe river in the state of Ceará, Brazil

The edafoclimatic conditions of the Brazilian semiarid region favor the water loss by surface runoff. The state of Ceará, almost completely covered by semiarid, has developed public policies for the construction of dams in order to attend the varied water demand. Several hydrological models were developed to support decisive processes in the complex management of reservoirs. This study aimed to establish a methodology for obtaining a georeferenced database suitable for use as input data in hydrological modeling in the semiarid of Ceará. It was used images of Landsat satellite and SRTM Mission, and soil maps of the state of Ceará. The Landsat images allowed the determination of the land cover and the SRTM Mission images, the automatic delineation of hydrographic basins. The soil type was obtained through the soil map. The database was obtained for Jaguaribe River hydrographic basin, in the state of Ceará, and is applicable to hydrological modeling based on the Curve Number method for estimating the surface runoff.

Palveluliiketoimintamallin kehittäminen teolliselle laitetoimittajalle

Tässä tutkimuksessa käsitellään teollisuuden palveluliiketoimintaa. Yritykset ovat perinteisesti saavuttaneet kilpailuetua markkinoilla tuottamalla teknisesti innovatiivisia koneita ja laitteita, mutta viime vuosien aikana yritykset ovat havainneet tarpeen myös palveluliiketoiminnan kehitykselle. Kohdeyrityksenä on teollisuudelle korkealuokkaisia mittalaitteita kehittävä ja valmistava yritys. Tutkimuksen tarkoituksena oli kehittää uusi innovatiivinen vuokraukseen perustuva palveluliiketoimintamalli perinteisen hankinnan sijaan. Olennaisena osana uuteen palveluliiketoimintamalliin liittyi myös tuotteen elinkaarikustannusten selvittäminen ja laskeminen. Toisena tutkimuksen kohteena oli selvittää semi-kvalitatiivisen kyselytutkimuksen avulla, miten yrityksen asiakkaat ja henkilökunta näkevät palveluiden tuottamisen nykytilan ja mitä haasteita palveluliiketoimintaan siirtyminen aiheuttaa organisaatiolle. Työn teoriaosuudessa käsiteltiin palveluliiketoimintaa eri näkökulmista, palvelun laadun muodostumista sekä uuden liiketoimintamallin kehittämistä Osterwalderin Canvas mallin avulla. Lisäksi käsiteltiin elin-kaarilaskennan soveltamista palveluliiketoiminnassa sekä eri investointimalleja teollisiin palveluihin. Kyselytutkimuksen tulosten perusteella asiakkaiden ja yrityksen henkilökunnan näkemykset erosivat palvelun laadun ja prosessien nykytilasta. Asiakkaat arvostivat palvelut paremmalle tasolle kuin henkilökunta. Tulosten perusteella yrityksen olisi kohdennettava resursseja sisäisten prosessien parantamiseen ja kehitettävä organisaatiota enemmän palveluorientoituneeksi. Tuotteen elinkaarikustannukset onnistuttiin selvittämään hyvin ja niiden avulla pystyttiin luomaan sekä yritykselle kannattava että asiakkaille houkutteleva palveluliiketoimintamalli, jonka avulla yrityksen on mahdollista palvella asiakkaitaan entistä paremmin.

Generation and Characterization of Knockout Mice and Analysis of Patient Material Demonstrates a Role for Tissue Inhibitor of Metalloproteinases 4 (Timp4) in the Cardiovascular System and Tumor Metastasis

This thesis focuses on tissue inhibitor of metalloproteinases 4 (TIMP4) which is the newest member of a small gene and protein family of four closely related endogenous inhibitors of extracellular matrix (ECM) degrading enzymes. Existing data on TIMP4 suggested that it exhibits a more restricted expression pattern than the other TIMPs with high expression levels in heart, brain, ovary and skeletal muscle. These observations and the fact that the ECM is of special importance to provide the cardiovascular system with structural strength combined with elasticity and distensibility, prompted the present molecular biologic investigation on TIMP4. In the first part of the study the murine Timp4 gene was cloned and characterized in detail. The structure of murine Timp4 genomic locus resembles that in other species and of the other Timps. The highest Timp4 expression was detected in heart, ovary and brain. As the expression pattern of Timp4 gives only limited information about its role in physiology and pathology, Timp4 knockout mice were generated next. The analysis of Timp4 knockout mice revealed that Timp4 deficiency has no obvious effect on the development, growth or fertility of mice. Therefore, Timp4 deficient mice were challenged using available cardiovascular models, i.e. experimental cardiac pressure overload and myocardial infarction. In the former model, Timp4 deficiency was found to be compensated by Timp2 overexpression, whereas in the myocardial infarct model, Timp4 deficiency resulted in increased mortality due to increased susceptibility for cardiac rupture. In the wound healing model, Timp4 deficiency was shown to result in transient retardation of re-epithelialization of cutaneous wounds. Melanoma tumor growth was similar in Timp4 deficient and control mice. Despite of this, lung metastasis of melanoma cells was significantly increased in Timp4 null mice. In an attempt to translate the current findings to patient material, TIMP4 expression was studied in human specimens representing different inflammatory cardiovascular pathologies, i.e. giant cell arteritis, atherosclerotic coronary arteries and heart allografts exhibiting signs of chronic rejection. The results showed that cardiovascular expression of TIMP4 is elevated particularly in areas exhibiting inflammation. The results of the present studies suggest that TIMP4 has a special role in the regulation of tissue repair processes in the heart, and also in healing wounds and metastases. Furthermore, evidence is provided suggesting the usefulness of TIMP4 as a novel systemic marker for vascular inflammation.

En generation intellektuella i uppror

Kirjallisuusarvostelu

Effects of a Financial Transaction Tax - Do Transaction Costs Lower Volatility?: A Literature Review

In this literature review the theorethical framework of Financial transaction taxes and their assumed effect on market volatility is assessed. The empirical evidence from various studies is compared against the theory and a simple empirical review of the Finnish stock market is conducted. The findings implicate that financial transaction taxes can not reduce volatility and their actual effect on markets is dependend by many other factors as well. Some evidence even suggests that transactions taxes may actually raise volatility.

Fast pyrolysis in circulating fluidized bed: feasibility study

Today the limitedness of fossil fuel resources is clearly realized. For this reason there is a strong focus throughout the world on shifting from fossil fuel based energy system to biofuel based energy system. In this respect Finland with its proven excellent forestry capabilities has a great potential to accomplish this goal. It is regarded that one of the most efficient ways of wood biomass utilization is to use it as a feedstock for fast pyrolysis process. By means of this process solid biomass is converted into liquid fuel called bio-oil which can be burnt at power plants, used for hydrogen generation through a catalytic steam reforming process and as a source of valuable chemical compounds. Nowadays different configurations of this process have found their applications in several pilot plants worldwide. However the circulating fluidized bed configuration is regarded as the one with the highest potential to be commercialized. In the current Master’s Thesis a feasibility study of circulating fluidized bed fast pyrolysis process utilizing Scots pine logs as a raw material was conducted. The production capacity of the process is 100 000 tonne/year of bio-oil. The feasibility study is divided into two phases: a process design phase and economic feasibility analysis phase. The process design phase consists of mass and heat balance calculations, equipment sizing, estimation of pressure drops in the pipelines and development of plant layout. This phase resulted in creation of process flow diagrams, equipment list and Microsoft Excel spreadsheet that calculates the process mass and heat balances depending on the bio-oil production capacity which can be set by a user. These documents are presented in the current report as appendices. In the economic feasibility analysis phase there were at first calculated investment and operating costs of the process. Then using these costs there was calculated the price of bio-oil which is required to reach the values of internal rate of return of 5%, 10%, 20%, 30%, 40%, and 50%.

A survey of the generation of ocean waves in a test basin

At present stage the analytical design of wave tolerance for floating structures and vessels is still imperfect due to the mutually complex and nonlinear phenomena between structures and waves. Wave tolerance design is usually carried out through iterative evaluations of results from model tests in a wave basin, and this is done in order to reach a final structural design. The wave generation has then become an important technology in the field of the coastal and ocean engineering. This paper summarizes the facilities of a test basin and a wave maker in Japan and also surveys the methodology of the generation of ocean waves in a test basin.

Investigation on diamond turning of silicon crystal - generation mechanism of surface cut with worn tool

This paper discusses the effect of tool wear on surface finish in single-point diamond turning of single crystal silicon. The morphology and topography of the machined surface clearly show the type of cutting edge wear reproduced onto the cutting grooves. Scanning electron microscopy is used in order to correlate the cutting edge damage and microtopography features observed through atomic force microscopy. The possible wear mechanisms affecting tool performance and surface generation during cutting are also discussed. The zero degree rake angle single point diamond tool presented small nicks on the cutting edge. The negative rake angle tools presented more a type of crater wear on the rake face. No wear was detected on flank face of the diamond tools.

Legal challenges for next generation science

Presentation at the Nordic Perspectives on Open Access and Open Science seminar, Helsinki, October 15, 2013