Formulation and characterization of drug-loaded microparticles using distiller’s dried grain kafirin

Kafirin, a protein extracted from sorghum grain has been formulated into microparticles, and proposed for use as a delivery system due to the resistance of kafirin to upper gastrointestinal digestion. However, extracting kafirin from sorghum “distiller’s dried grains with solubles” (DDGS) may be more efficient as the carbohydrate component has been removed by fermentation. This study investigated the properties and use of kafirin extracted from DDGS to formulate microparticles. Prednisolone, an anti-inflammatory drug that could benefit from a delayed and targeted delivery system to the colon, was loaded into DDGS kafirin microparticles by phase separation using sodium chloride. Scanning electron micrographs revealed that the empty and prednisolone-loaded microparticles were round in shape and varied in size. Surface binding studies indicated prednisolone was loaded within the microparticles rather than being solely bound on the surface. These findings demonstrate DDGS kafirin can be formulated into microparticles and loaded with medication. Future studies could investigate the potential applications of DDGS kafirin microparticles as an orally administered targeted drug-delivery system.

Formulation and characterization of drug-loaded microparticles using distiller’s dried grain kafirin

Kafirin, a protein extracted from sorghum grain has been formulated into microparticles, and proposed for use as a delivery system due to the resistance of kafirin to upper gastrointestinal digestion. However, extracting kafirin from sorghum distillers dried grains with solubles (DDGS) may be more efficient as the carbohydrate component has been removed by fermentation. This study investigated the properties and use of kafirin extracted from DDGS to formulate microparticles. Prednisolone, an anti-inflammatory drug that could benefit from a delayed and targeted delivery system to the colon, was loaded into DDGS kafirin microparticles by phase separation using sodium chloride. Scanning electron micrographs revealed that the empty and prednisolone-loaded microparticles were round in shape and varied in size. Surface binding studies indicated prednisolone was loaded within the microparticles rather than being solely bound on the surface. These findings demonstrate DDGS kafirin can be formulated into microparticles and loaded with medication. Future studies could investigate the potential applications of DDGS kafirin microparticles as an orally administered targeted drug-delivery system.

Dual Drug Delivery Microcapsules via Layer-by-Layer Self-Assembly

The integration of hydrophobic and hydrophilic drugs in the polymer microcapsule offers the possibility of developing a new drug delivery system that combines the best features of these two distinct classes of material. Recently, we have reported the encapsulation of an uncharged water-insoluble drug in the polymer membrane. The hydrophobic drug is deposited using a layer-by-layer (LbL) technique, which is based on the sequential adsorption of oppositely charged polyelectrolytes onto a charged substrate. In this paper, we report the encapsulation of two different drugs, which are invariably different in structure and in their solubility in water. We have characterized these dual drug vehicular capsules by confocal laser scanning microscopy, atomic force microscopy, visible microscopy, and transmission electron microscopy. The growth of a thin film on a flat substrate by LbL was monitored by UV−vis spectra. The desorption kinetics of two drugs from the thin film was modeled by a second-order rate model.

Drug discovery approaches utilizing three-dimensional cell culture

Historically, two-dimensional (2D) cell culture has been the preferred method of producing disease models in vitro. Recently, there has been a move away from 2D culture in favor of generating three-dimensional (3D) multicellular structures, which are thought to be more representative of the in vivo environment. This transition has brought with it an influx of technologies capable of producing these structures in various ways. However, it is becoming evident that many of these technologies do not perform well in automated in vitro drug discovery units. We believe that this is a result of their incompatibility with high-throughput screening (HTS). In this study, we review a number of technologies, which are currently available for producing in vitro 3D disease models. We assess their amenability with high-content screening and HTS and highlight our own work in attempting to address many of the practical problems that are hampering the successful deployment of 3D cell systems in mainstream research.

Fracture Behavior of Multidirectional DCB Specimen: Higher-Order Beam Theories

Mathematical models, for the stress analysis of symmetric multidirectional double cantilever beam (DCB) specimen using classical beam theory, first and higher-order shear deformation beam theories, have been developed to determine the Mode I strain energy release rate (SERR) for symmetric multidirectional composites. The SERR has been calculated using the compliance approach. In the present study, both variationally and nonvariationally derived matching conditions have been applied at the crack tip of DCB specimen. For the unidirectional and cross-ply composite DCB specimens, beam models under both plane stress and plane strain conditions in the width direction are applicable with good performance where as for the multidirectional composite DCB specimen, only the beam model under plane strain condition in the width direction appears to be applicable with moderate performance. Among the shear deformation beam theories considered, the performance of higher-order shear deformation beam theory, having quadratic variation for transverse displacement over the thickness, is superior in determining the SERR for multidirectional DCB specimen.

Gap acceptance behavior of mobile phone distracted drivers at roundabouts

While mobile phones have become ubiquitous in modern society, the use of mobile phones while driving is increasing at an alarming rate despite the associated crash risks. A significant safety concern is that driving while distracted by a mobile phone is more prevalent among young drivers, a less experienced driving cohort with elevated crash risk. The objective of this study was to examine the gap acceptance behavior of distracted young drivers at roundabouts. The CARRS-Q Advanced Driving Simulator was used to test participants on a simulated gap acceptance scenario at roundabouts. Conflicting traffic from the right approach of a four-legged roundabout were programmed to have a series of vehicles having the gaps between them proportionately increased from two to six seconds. Thirty-two licensed young drivers drove the simulator under three phone conditions: baseline (no phone conversation), hands-free and handheld phone conversations. Results show that distracted drivers started responding to the gap acceptance scenario at a distance closer to the roundabout and approached the roundabout at slower speeds. They also decelerated at faster rates to reduce their speeds prior to gap acceptance compared to non-distracted drivers. Although accepted gap sizes were not significantly different across phone conditions, differences in the safety margins at various gap sizes—measured by Post Encroachment Time (PET) between the driven vehicle and the conflicting vehicle—were statistically significant across phone conditions. PETs for distracted drivers were smaller across different gap sizes, suggesting a lower safety margin taken by distracted drivers compared to non-distracted drivers. The results aid in understanding how cognitive distraction resulting from mobile phone conversations while driving influences driving behavior during gap acceptance at roundabouts.

Evolution of Social Behavior Through Interpopulation Selection

Under certain special conditions natural selection can be effective at the level of local populations, or demes. Such interpopulation selection will favor genotypes that reduce the probability of extinction of their parent population even at the cost of a lowered inclusive fitness. Such genotypes may be characterized by altruistic traits only in a viscous population, i.e., in a population in which neighbors tend to be closely related. In a non-viscous population the interpopulation selection will instead favor spiteful traits when the populations are susceptible to extinction through the overutilization of the habitat, and cooperative traits when it is the newly established populations that are in the greatest danger of extinction.

Small State Cultures of Consensus : State Traditions and Consensus-Seeking in the Neo-Corporatist and Neutrality Policies in Post-1945 Austria and Finland

Austria and Finland are persistently referred to as the “success stories” of post-1945 European history. Notwithstanding their different points of departure, in the course of the Cold War both countries portrayed themselves as small and neutral border-states in the world dictated by superpower politics. By the 1970s, both countries frequently ranked at the top end in various international classifications regarding economic development and well-being in society. This trend continues today. The study takes under scrutiny the concept of consensus which figures centrally in the two national narratives of post-1945 success. Given that the two domestic contexts as such only share few direct links with one another and are more obviously different than similar in terms of their geographical location, historical experiences and politico-cultural traditions, the analogies and variations in the anatomies of the post-1945 “cultures of consensus” provide an interesting topic for a historical comparative and cross-national examination. The main research question concerns the identification and analysis of the conceptual and procedural convergence points of the concepts of the state and consensus. The thesis is divided into six main chapters. After the introduction, the second chapter presents the theoretical framework in more detail by focusing on the key concepts of the study – the state and consensus. Chapter two also introduces the comparative historical and cross-national research angles. Chapter three grounds the key concepts of the state and consensus in the historical contexts of Austria and Finland by discussing the state, the nation and democracy in a longer term comparative perspective. The fourth and fifth chapter present case studies on the two policy fields, the “pillars”, upon which the post-1945 Austrian and Finnish cultures of consensus are argued to have rested. Chapter four deals with neo-corporatist features in the economic policy making and chapter five discusses the building up of domestic consensus regarding the key concepts of neutrality policies in the 1950s and 1960s. The study concludes that it was not consensus as such but the strikingly intense preoccupation with the theme of domestic consensus that cross-cut, in a curiously analogous manner, the policy-making processes studied. The main challenge for the post-1945 architects of Austrian and Finnish cultures of consensus was to find strategies and concepts for consensus-building which would be compatible with the principles of democracy. Discussed at the level of procedures, the most important finding of the study concerns the triangular mechanism of coordination, consultation and cooperation that set into motion and facilitated a new type of search for consensus in both post-war societies. In this triangle, the agency of the state was central, though in varying ways. The new conceptions concerning a small state’s position in the Cold War world also prompted cross-nationally perceivable willingness to reconsider inherited concepts and procedures of the state and the nation. At the same time, the ways of understanding the role of the state and its relation to society remained profoundly different in Austria and Finland and this basic difference was in many ways reflected in the concepts and procedures deployed in the search for consensus and management of domestic conflicts. For more detailed information, please consult the author.

Can moral potency and psychological risk close the gap between ethical beliefs and unacceptable consumer behavior?

Depending on how they perceive risk, consumers may not always act according to their ethical beliefs, exposing a gap between beliefs and behavior. We investigate the effect of moral potency on perceived psychological risk of committing an unacceptable behavior. The results suggest that perceived risk is triggered by moral ownership.

A review on exploring the behavior of multi-layer composite structures under dynamic loading

This paper reviews the recent research progress on multi-layer composite structures composed of variety of materials. The utilization of multi-layer composite system is found to be common in metal structures and pavement systems. The layer of composite structure designed to encounter heavy dynamic energy should have sufficient ductility to counteract the intensity of energy. Therefore, the selection of materials and enhancement of interface bonding become crucial and both are discussed in this paper. The failure modes have also been explored in conjunction with stresses at failures and inferred solutions are also revealed. The paper attempts to reveal all technical facts on multi-layer composite structure in a broad field.

Expanding the research area of behavior change support systems

The First International Workshop on Behavior Change Support Systems attracted a great research interest. The selected papers focused on abstraction, implementation and evaluation of Behavior Change Support Systems. The workshop is an evidence of how researchers from around the globe have their own perspective of behavior change interventions. In this abstract, we have attempted to outline core issues that can enhance persuasiveness of such support systems. Finally, we highlight important research questions relating to the development of effective Behavior Change Support Systems.

Seeking continuity: Educational strategy in and for mobile ADF families

This report shares findings and insights from an interview study conducted in 2009, with 34 ADF families. These families were identified in the communities of primary schools in both state and Catholic systems with high ADF family enrolments in 3 towns across 2 states, with the assistance of the DCO and their embedded Defence School Transition Aides (DSTAs). In the interviews the parents were invited to describe their history of ADF relocations, and how they managed transitions for each member in terms of school choice, child care arrangements, spouse employment, and educational transitions. Parallel interviews were conducted with 12 teachers and 6 DSTAs across the identified schools to describe how schools cater for mobile ADF families flowing through their classes. Parents were invited to tell the story of their family’s sequence of moves and how each member made the transition, then reflect more generally on what advice they’d give other mobile families. Teachers were asked to describe how they respond to the mobile families in their school community, and to illustrate some of the issues and challenges from the institutional perspective. By offering perspectives from both parents and teachers, the report hopes to facilitate a dialogue between parties to address their common goal – promoting productive continuities in education for children in mobile families.