Estudos de sorção de um corante aniônico modelo em partículas de quitosana reticulada

Textile activity results in effluents with a variety of dyes. Among the several processes for dye-uptaking from these wastewaters, sorption is one of the most effective methods, chitosan being a very promising alternative for this end. The sorption of Methyl Orange by chitosan crosslinked particles was approached using equilibrium and kinetic analyses at different pH s. Besides the standard pseudo-order analysis normally effectuated (i.e. pseudo-first-order and pseudo-second-order), a novel approach involving a pseudo-nth-order kinetics was used, nbeing determined via non-linear regression, using the Levenberg-Marquardt method. Zeta potential measurements indicated that electrostatic interactions were important for the sorption process. Regarding equilibrium experiments, data were well fitted to a hybrid Langmuir-Freundlich isotherm, and estimated Gibbs free energy of adsorption as a function of mass of dye per area of chitosan showed that the process of adsorption becomes more homogeneous as the pH of the continuous phase decreased. Considering the kinetics of sorption, although a pseudo-nth-order description yielded good fits, a kinetic equation involving diffusion adsorption phenomena was found to be more consistent in terms of a physicochemical description of the sorption process

Fontes e doses de manganês no acúmulo de nutrientes na palhada em cana-de-açúcar

The sugar cane crop uptake high amount of nutrients from the soil and the lack of these elements can result in low productivity of this crop. This study aimed to evaluate the effect of sources and doses of manganese on the accumulation of macro-and micronutrients of straw and stalk yield in the sugar cane crop. The experiment was conducted at Fujimoto farm, area administered by the Vale do Parana SA Alcohol and Sugar located in Suzanapolis - SP county. The experimental design was randomized blocks in a factorial scheme 5x3, with five levels of manganese and three sources, applied at planting, in four replications. The plots consisted of four rows 5 m long, spaced by 1.5 m. The variety used was RB 86-7515. The variables analyzed in the sugar cane plant and sugar cane ratoon cane were: accumulation of macro-and micronutrients, dry weight of straw and crop yield. The sources Mn influenced the accumulation of N, P and K in the straw cane plant and ratoon sugar cane in the accumulation of K, Ca, S, B, Mn and Zn. The increasing levels of Mn increased the cumulative amount of Ca, Mg, S and Mn in the cane plant and stubble of Ca, Fe and Mn in sugar cane ratoon. The sources of Mn did not influence the dry matter yields of straw and stalk, so as to plant cane to first sugar cane ratoon. The levels of Mn influenced linearly the dry straw on cane plant. As for the stem yield of sugarcane plant and sugar cane ratoon was not influenced by the levels of Mn.

Qualidade e produtividade da cana planta e cana soca em função de doses e fontes de manganês

The crop of the sugarcane is stood out in the Brazilian agricultural scenery, due to the great demand of sugar, alcohol and by-products. The present work had as objective to evaluate the effect of five doses and three sources of manganese applied at planting furrow in sugarcane, in two cuts, in the Northwest area of São Paulo State, Brazil. The experiment was conducted at Fujimoto farm with coordinates 20 degrees 32 'S and 50 degrees 58' O, and altitude of 361 meters, area administered by Distillery Vale do Parana S/A Alcool and Acucar, in Suzanapolis county - São Paulo state. A randomizef blocks design in a factorial scheme 5x3, being 5 doses of manganese (0; 2.5; 5.0; 7.5 and 10.0 kg ha(-1)), and 3 sources (Quelate, FTE and manganese sulfate), applied at planting furrow, in 4 repetitions was used. The plots were constituted by 4 lines of 5 m length, spaced by 1.5 m. The RB 86-7515 variety was used. The sources of manganese did not influence in the technological quality and productivity of stems in none of the cuts of sugarcane. The application of doses of manganese resulted in increase on values of recoverable total sugar per ha and ton of pol per ha in plant cane, not influencing in the other variables analyzed on plant cane and ratoon cane.

Efeito residual da escória de siderurgia como corretivo de acidez do solo na soqueira de cana-de-açúcar

A escória de siderurgia, como material corretivo e efeito residual prolongado, pode beneficiar culturas de ciclo longo, a exemplo da cana-de-açúcar, minimizando a queda de produção ao longo do ciclo produtivo. Este trabalho objetivou avaliar diferentes níveis de saturação por bases, utilizando, como corretivo do solo, a escória de siderurgia, comparando-a com calcário calcítico, nas alterações de alguns atributos químicos do solo, bem como na resposta da soqueira da cana-de-açúcar. Para isto, realizou-se um experimento com a variedade SP 80-1842, durante o terceiro e o quarto corte, nos anos agrícolas 2000/01 e 2001/02. Os tratamentos, dispostos em blocos casualizados, em esquema fatorial com quatro repetições, constaram de duas fontes de corretivos, calcário calcítico e escória de siderurgia, e quatro níveis de correção, estimados pelo método da saturação por bases (V %): testemunha (sem correção) e com correção para V % de 50; 75 e 100, tendo sido tais corretivos aplicados na época do plantio da cana-de-açúcar. O calcário calcítico e a escória de siderurgia promoveram efeito residual benéfico, após 48 meses da aplicação, na correção da acidez do solo e na elevação do valor da saturação por bases; a maior dose de calcário causou efeito depressivo no perfilhamento, no número de colmos industrializáveis e na produção da cana-de-açúcar, fato não observado com uso da escória de siderurgia; a aplicação da escória de siderurgia e do calcário, em pré-plantio, promoveu efeito residual positivo na produção da soqueira de cana-de-açúcar.

Avaliação de variante somaclonal de porte baixo de bananeira 'Nanicão Jangada' (Musa sp) em duas densidades

Avaliou-se, sob duas densidades de plantio, um variante somaclonal de porte baixo de bananeira, comparando-o com a variedade Nanicão Jangada que lhe deu origem. Os materiais genéticos 'Nanicão Jangada'(controle) e o variante somaclonal representado pelas seleções 224 e 225 de um ensaio anterior, foram avaliados nos espaçamentos 2,0m X 2,0m (densidade 2500 plantas ha-1) e 3,0m X 2,0m (1666plantas ha-1), na Fazenda de Ensino e Pesquisa da Faculdade de Engenharia - UNESP, Campus de Ilha Solteira-SP. O ensaio foi conduzido em blocos ao acaso com cinco repetições, com utilização de mudas micropropagadas, sob irrigação por gotejamento, no período de dezembro de 1998 a março de 2001, com avaliação dos dois primeiros ciclos de produção. Constatou-se efeito da densidade e do ciclo sobre a produção estimada de frutos sendo que no cultivo mais denso, a média foi de 81,25 t.ha-1 no primeiro ciclo de produção e 67,93 t.ha-1 no segundo ciclo. No cultivo de menor densidade a produção estimada no primeiro ciclo foi de 51,35 t.ha-1 e 44,08 t.ha-1 no segundo. As seleções do variante de porte baixo apresentaram menor altura da planta e mostraram-se relativamente mais precoces e com produção semelhante a cv. Nanicão Jangada no primeiro ciclo. No segundo ciclo houve uma queda na produção do bananal, com maior intensidade para a seleção 225 do variante.

A assistência técnica e extensão rural no assentamento modelo: proposição e realidade

This discourse analyzes the technical assistance concerning the rural settlement, which is seen as a demand of the social movement that claims for agrarian reformation, and is a goal of II PNRA, launched in may 2004, as a essential national public politics on process of building and consolidation of settlement and familiar agriculture, proposing the return of technical assistance service and rural extension in Brazil, which were started in the and of 1940 s. We analyze, in particular, the technical assistance program, social and environmental agrarian reformation, on model settlement, a program created, especially, to the rural settlements, coordinated by INCRA. Based on the documental analyze and local study, it is noticed that the experience of technical assistance implemented on model settlement shows the non continuation and fragility on technical assistance actions to rural workers. This context goes against the lately technical assistance governmental apparatus, which ensures to make settlements stronger, to support and to get important the familiar agriculture system. This way, technical assistance execution, trough the tertiary service, follows the neoliberal strategy and, the State, besides decreases the estimate to public politics, takes its actions control from the State to the shared control through partnership and transferring of responsibility, expressing its historic lack of attention to the worker class demands. In spite of workers resistance, expectative and hope, the lack of these services, as well as the other politics deficiencies, which are necessary to the settlements, are endangering its activities and threatening its survival in the settlement

Consórcio de feijoeiro e milho-verde na entressafra. II- comportamento das cultivares de milho

The green corn demand, production of quality bean grain and better use of land and water resources can be used by small farmers through the intercropping of common bean and green corn in off-season crops. Field experiments were conducted in the Polo Regional Extremo Oeste-APTA, in Andradina -São Paulo State, in 2005 and 2006. The objective was to evaluate the performance of green corn cultivars grown in single crop and intercropped with common bean. The randomized blocks design with 8 treatments constituted by the combination of two corn (CATIVERDE 02 and XB 7012) and three common bean cultivars of different growth habits: IPR Colibri (I), IPR Juriti (II) and IAC Carioca (III), with four repetitions was used. The influence of the intercropping on the performance of corn was not significant. The hybrid XB 7012 was more productive in intercropping and in single crop. The hybrid production more 8000 commercials ears and lengt ears when compared with the variety. The intercropping with the IPR Juriti or IPR Colibri cultivars were the most profitable for the producer.

Consórcio de feijoeiro e milho-verde na entressafra I comportamento das cultivares de feijão

Green corn demand, production of quality bean grain and better use of land and water resources can be used by small farmers through the intercropping of common bean and green corn in off-season crops. Field experiments were conducted in the Polo Regional Extremo Oeste- APTA, in Andradina -São Paulo State, in 2005 and 2006. The objective was to evaluate the performance of common bean cultivars grown in single crop and intercropped with green corn. The randomized blocks design with 9 treatments constituted by the combination of three common bean cultivars of different growth habits: IPR Colibri (Type I), IPR Juriti (Type II) and IAC Carioca (Type III), and two corn cultivars: CATIVERDE 02 (variety) and XB 7012 (hybrid), with four repetitions was used. The intercropping influenced the performance of all common bean cultivars. The green corn CATIVERDE 02 is more appropriate for intercropping with common bean. IAC Carioca, IPR Juriti and IPR Colibri cultivars present same behavior. IPR Colibri presented potential for intercropping.

Orientação familiar e seus efeitos na gagueira infantil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

AO-OIL: um middleware orientado a aspectos baseado em uma arquitetura de referência

Middleware platforms have been widely used as an underlying infrastructure to the development of distributed applications. They provide distribution and heterogeneity transparency and a set of services that ease the construction of distributed applications. Nowadays, the middlewares accommodate an increasing variety of requirements to satisfy distinct application domains. This broad range of application requirements increases the complexity of the middleware, due to the introduction of many cross-cutting concerns in the architecture, which are not properly modularized by traditional programming techniques, resulting in a tangling and spread of theses concerns in the middleware code. The presence of these cross-cutting concerns limits the middleware scalability and aspect-oriented paradigm has been used successfully to improve the modularity, extensibility and customization capabilities of middleware. This work presents AO-OiL, an aspect-oriented (AO) middleware architecture, based on the AO middleware reference architecture. This middleware follows the philosophy that the middleware functionalities must be driven by the application requirements. AO-OiL consists in an AO refactoring of the OiL (Orb in Lua) middleware in order to separate basic and crosscutting concerns. The proposed architecture was implemented in Lua and RE-AspectLua. To evaluate the refactoring impact in the middleware architecture, this paper presents a comparative analysis of performance between AO-OiL and OiL

Um framework de agentes de recomendação para sistemas Web

The World Wide Web has been consolidated over the last years as a standard platform to provide software systems in the Internet. Nowadays, a great variety of user applications are available on the Web, varying from corporate applications to the banking domain, or from electronic commerce to the governmental domain. Given the quantity of information available and the quantity of users dealing with their services, many Web systems have sought to present recommendations of use as part of their functionalities, in order to let the users to have a better usage of the services available, based on their profile, history navigation and system use. In this context, this dissertation proposes the development of an agent-based framework that offers recommendations for users of Web systems. It involves the conception, design and implementation of an object-oriented framework. The framework agents can be plugged or unplugged in a non-invasive way in existing Web applications using aspect-oriented techniques. The framework is evaluated through its instantiation to three different Web systems

Avaliação do atendimento anestésico da criança e do adolescente em um hospital universitário

JUSTIFICATIVA E OBJETIVOS: Qualidade em anestesia e na satisfação dos pacientes têm tido acentuado destaque. O objetivo foi avaliar o atendimento anestésico de crianças e adolescentes, entrevistando seus responsáveis. MÉTODO: Foram entrevistados 230 responsáveis por crianças e adolescentes submetidos à anestesia no período compreendido entre abril e dezembro de 2003. Realizou-se entrevista na visita pós-operatória através de questionário com quatro itens: identificação das crianças e de adolescentes e seus responsáveis (item 1); esclarecimentos na visita pré-anestésica (item 2), quanto à anestesia (item 3) e à recuperação pós-anestésica (SRPA) (item 4), determinando-se quem dera as informações aos entrevistados e se houvera complicação no pós-anestésico. O responsável atribuiu nota de 0 a 10 ao Serviço de Anestesiologia. RESULTADOS: A pesquisa foi respondida pela mãe em 189 (82,2%) casos. A maioria dos entrevistados, 114 (75,6%), tinha entre 20 e 39 anos, era casada (148 a 64,3%) e 140 (60,9%) não tinham ocupação. Para 89%, o anestesiologista se identificou; para 37% e 77,4%, esclareceu sobre importância e tempo do jejum; 82%, sobre anemia; 90%, alergia; 46,8%, importância da SRPA; 42,2%, tempo de permanência; 72,9%, estado de saúde de sua criança. Não houve apreensões para 49%, 58% e 58%, respectivamente, no pré, intra e pós-anestésico. Gostariam de ter estado com sua criança/adolescente na chegada à SRPA 78,9%. Foram relacionadas preocupações no período pré, intra e pós-anestésico com o sexo e a idade do paciente - não ter tido nenhuma preocupação - maioria dos entrevistados - e com a escolaridade do entrevistado - quanto mais completa, menor foi o número e a variedade das preocupações relatadas. As notas atribuídas ao Serviço de Anestesiologia tiveram maior freqüência entre 7 e 10 (97,4%). CONCLUSÕES: Considera-se que o Serviço de Anestesiologia desenvolve bom trabalho, apesar de falhas na comunicação, que são de solução simples e dependem mais da vontade do serviço que de seu conhecimento científico.

BMMobile: uma linha de produtos para dimensionamento de bombeio mecânico em dispositivos móveis

With the increase of processing ability, storage and several kinds of communication existing such as Bluetooth, infrared, wireless networks, etc.., mobile devices are no longer only devices with specific function and have become tools with various functionalities. In the business field, the benefits that these kinds of devices can offer are considerable, because the portability allows tasks that previously could only be performed within the work environment, can be performed anywhere. In the context of oil exploration companies, mobile applications allow quick actions could be taken by petroleum engineers and technicians, using their mobile devices to avoid potential catastrophes like an unexpected stop or break of important equipment. In general, the configuration of equipment for oil extraction is performed on the work environment using computer systems in desktop platforms. After the obtained configuration, an employee goes to equipment to be configured and perform the modifications obtained on the use desktop system. This management process equipment for oil extraction takes long time and does not guarantee the maintenance in time to avoid problems. With the use of mobile devices, management and maintenance of equipment for oil extraction can be performed in a more agile time once it enables the engineer or technician oil can perform this configuration at the time and place where the request comes for example, near in the oil well where the equipment is located. The wide variety of mobile devices creates a big difficulty in developing mobile applications, since for one application can function in several types of devices, the application must be changed for each specific type of device, which makes the development quite costly. This paper defines and implements a software product line for designing sucker-rod pumping systems on mobile devices. This product line of software, called BMMobile, aims to produce products that are capable of performing calculations to determine the possible configurations for the equipment in the design suckerrod pumping, and managing the variabilities of the various products that can be generated. Besides, this work performs two evaluations. The first evaluation will verify the consistency of the products produced by the software product line. The second evaluation will verify the reuse of some products generated by SPL developed

Arcabouço geofísico, isostasia e causas do magmatismo cenozóico da província Borborema e de sua margem continental (Nordeste do Brasil)

The Borborema Province (BP) is a geologic domain located in Northeastern Brazil. The BP is limited at the south by the São Francisco craton, at the west by the Parnaíba basin, and both at the north and east by coastal sedimentary basins. Nonetheless the BP surface geology is well known, several key aspects of its evolution are still open, notably: i)its tectonic compartmentalization established after the Brasiliano orogenesis, ii) the architecture of its cretaceous continental margin, iii) the elastic properties of its lithosphere, and iv) the causes of magmatism and uplifting which occurred in the Cenozoic. In this thesis, a regional coverage of geophysical data (elevation, gravity, magnetic, geoid height, and surface wave global tomography) were integrated with surface geologic information aiming to attain a better understanding of the above questions. In the Riacho do Pontal belt and in the western sector of the Sergipano belt, the neoproterozoic suture of the collision of the Sul domain of the BP with the Sanfranciscana plate (SFP) is correlated with an expressive dipolar gravity anomaly. The positive lobule of this anomaly is due to the BP lower continental crust uplifting whilst the negative lobule is due to the supracrustal nappes overthrusting the SFP. In the eastern sector of the Sergipano belt, this dipolar gravity anomaly does not exist. However the suture still can be identified at the southern sector of the Marancó complex arc, alongside of the Porto da Folha shear zone, where the SFP N-S geophysical alignments are truncated. The boundary associated to the collision of the Ceará domain of the BP with the West African craton is also correlated with a dipolar gravity anomaly. The positive lobule of this anomaly coincides with the Sobral-Pedro II shear zone whilst the negative lobule is associated with the Santa Quitéria magmatic arc. Judging by their geophysical signatures, the major BP internal boundaries are: i)the western sector of the Pernambuco shear zone and the eastern continuation of this shear zone as the Congo shear zone, ii) the Patos shear zone, and iii) the Jaguaribe shear zone and its southwestern continuation as the Tatajuba shear zone. These boundaries divide the BP in five tectonic domains in the geophysical criteria: Sul, Transversal, Rio Grande do Norte, Ceará, and Médio Coreaú. The Sul domain is characterized by geophysical signatures associated with the BP and SFP collision. The fact that Congo shear zone is now proposed as part of the Transversal domain boundary implies an important change in the original definition of this domain. The Rio Grande do Norte domain presents a highly magnetized crust resulted from the superposition of precambrian and phanerozoic events. The Ceará domain is divided by the Senador Pompeu shear zone in two subdomains: the eastern one corresponds to the Orós-Jaguaribe belt and the western one to the Ceará-Central subdomain. The latter subdomain exhibits a positive ENE-W SW gravity anomaly which was associated to a crustal discontinuity. This discontinuity would have acted as a rampart against to the N-S Brasiliano orogenic nappes. The Médio Coreaú domain also presents a dipolar gravity anomaly. Its positive lobule is due to granulitic rocks whereas the negative one is caused by supracrustal rocks. The boundary between Médio Coreaú and Ceará domains can be traced below the Parnaíba basin sediments by its geophysical signature. The joint analysis of free air anomalies, free air admittances, and effective elastic thickness estimates (Te) revealed that the Brazilian East and Equatorial continental margins have quite different elastic properties. In the first one 10 km < Te < 20 km whereas in the second one Te ≤ 10 km. The weakness of the Equatorial margin lithosphere was caused by the cenozoic magmatism. The BP continental margin presents segmentations; some of them have inheritance from precambrian structures and domains. The segmentations conform markedly with some sedimentary basin features which are below described from south to north. The limit between Sergipe and Alagoas subbasins coincides with the suture between BP and SFP. Te estimates indicates concordantly that in Sergipe subbasin Te is around 20 km while Alagoas subbasin has Te around 10 km, thus revealing that the lithosphere in the Sergipe subbasin has a greater rigidity than the lithosphere in the Alagoas subbasin. Additionally inside the crust beneath Sergipe subbasin occurs a very dense body (underplating or crustal heritage?) which is not present in the crust beneath Alagoas subbasin. The continental margin of the Pernambuco basin (15 < Te < 25 km) presents a very distinct free air edge effect displaying two anomalies. This fact indicates the existence in the Pernambuco plateau of a relatively thick crust. In the Paraíba basin the free air edge effect is quite uniform, Te ≈ 15 km, and the lower crust is abnormally dense probably due to its alteration by a magmatic underplating in the Cenozoic. The Potiguar basin segmentation in three parts was corroborated by the Te estimates: in the Potiguar rift Te ≅ 5 km, in the Aracati platform Te ≅ 25 km, and in the Touros platform Te ≅ 10 km. The observed weakness of the lithosphere in the Potiguar rift segment is due to the high heat flux while the relatively high strength of the lithosphere in the Touros platform may be due to the existence of an archaean crust. The Ceará basin, in the region of Mundaú and Icaraí subbasins, presents a quite uniform free air edge effect and Te ranges from 10 to 15 km. The analysis of the Bouguer admittance revealed that isostasy in BP can be explained with an isostatic model where combined surface and buried loadings are present. The estimated ratio of the buried loading relative to the surface loading is equal to 15. In addition, the lower crust in BP is abnormally dense. These affirmations are particularly adequate to the northern portion of BP where adherence of the observed data to the isostatic model is quite good. Using the same above described isostatic model to calculate the coherence function, it was obtained that a single Te estimate for the entire BP must be lower than 60 km; in addition, the BP north portion has Te around 20 km. Using the conventional elastic flexural model to isostasy, an inversion of crust thickness was performed. It was identified two regions in BP where the crust is thickened: one below the Borborema plateau (associated to an uplifting in the Cenozoic) and the other one in the Ceará domain beneath the Santa Quitéria magmatic arc (a residue associated to the Brasiliano orogenesis). On the other hand, along the Cariri-Potiguar trend, the crust is thinned due to an aborted rifting in the Cretaceous. Based on the interpretation of free air anomalies, it was inferred the existence of a large magmatism in the oceanic crust surrounding the BP, in contrast with the incipient magmatism in the continent as shown by surface geology. In BP a quite important positive geoid anomaly exists. This anomaly is spatially correlated with the Borborema plateau and the Macaú-Queimadas volcanic lineament. The integrated interpretation of geoid height anomaly data, global shear velocity model, and geologic data allow to propose that and Edge Driven Convection (EDC) may have caused the Cenozoic magmatism. The EDC is an instability that presumably occurs at the boundary between thick stable lithosphere and oceanic thin lithosphere. In the BP lithosphere, the EDC mechanism would have dragged the cold lithospheric mantle into the hot asthenospheric mantle thus causing a positive density contrast that would have generated the main component of the geoid height anomaly. In addition, the compatibility of the gravity data with the isostatic model, where combined surface and buried loadings are present, together with the temporal correlation between the Cenozoic magmatism and the Borborema plateau uplifting allow to propose that this uplifting would have been caused by the buoyancy effect of a crustal root generated by a magmatic underplating in the Cenozoic

Fatores de sucesso ou insucesso do turismo ambientalmente sustentável : percepção das autoridades públicas no pólo costa das dunas do Rio Grande do Norte

This study aims to compare the thermal performance of tiles made from recycled material (waste packaging cardboard with aluminized film) with the tiles of fiber and bitumen, fiber cement and red ceramic with the aim of verifying the suitability of tile to be used in hot and humid climate of low latitude. The samples were selected according to the availability from Natal RN market, as they are sold to the consumers. The methodology was based on studies that used experimental apparatus composed of thermal chambers heated by banks of incandescent bulbs, to analyze the thermal performance of materials. The tiles in the study were submitted to analysis of thermal performance, thermophysical properties and absorptance, using chambers of thermal performance, measuring the thermophysical properties and portable spectrometer, respectively. Comparative analysis of thermal performance between two samples of the recycled material with dimple sizes and different amounts of aluminum were made, in order to verify, if these characteristics had some interference on the thermal performance of them; the results showed no significant performance differences between the samples. The data obtained in chambers of thermal performance and confirmed by statistical analysis, showed, that the tile of recycled material have similar thermal performance to the tile of fiber cement. In addition to these tests was carried out the automatic monitoring of a building covered with tiles of recycled material, to verify its thermal performance in a real situation. The results showed that recycled shingles must be used with technical criteria similar to those used for fiber cement tiles, with regard to the heat gain into the building. Within these criteria should be taken into account local characteristics, especially in regions with hot and humid climate, and its use must be associated, according to the literature, to elements of thermal insulation and use of passive techniques such as vented attics, ceilings and right foot higher