A subject-specific model of human buttocks and thighs in a seated posture

Finite element analyses of the human body in seated postures requires digital models capable of providing accurate and precise prediction of the tissue-level response of the body in the seated posture. To achieve such models, the human anatomy must be represented with high fidelity. This information can readily be defined using medical imaging techniques such as Magnetic Resonance Imaging (MRI) or Computed Tomography (CT). Current practices for constructing digital human models, based on the magnetic resonance (MR) images, in a lying down (supine) posture have reduced the error in the geometric representation of human anatomy relative to reconstructions based on data from cadaveric studies. Nonetheless, the significant differences between seated and supine postures in segment orientation, soft-tissue deformation and soft tissue strain create a need for data obtained in postures more similar to the application posture. In this study, we present a novel method for creating digital human models based on seated MR data. An adult-male volunteer was scanned in a simulated driving posture using a FONAR 0.6T upright MRI scanner with a T1 scanning protocol. To compensate for unavoidable image distortion near the edges of the study, images of the same anatomical structures were obtained in transverse and sagittal planes. Combinations of transverse and sagittal images were used to reconstruct the major anatomical features from the buttocks through the knees, including bone, muscle and fat tissue perimeters, using Solidworks® software. For each MR image, B-splines were created as contours for the anatomical structures of interest, and LOFT commands were used to interpolate between the generated Bsplines. The reconstruction of the pelvis, from MR data, was enhanced by the use of a template model generated in previous work CT images. A non-rigid registration algorithm was used to fit the pelvis template into the MR data. Additionally, MR image processing was conducted to both the left and the right sides of the model due to the intended asymmetric posture of the volunteer during the MR measurements. The presented subject-specific, three-dimensional model of the buttocks and thighs will add value to optimisation cycles in automotive seat development when used in simulating human interaction with automotive seats.

Digital human modelling for vehicle design and manufacturing

Digital human modelling (DHM) has today matured from research into industrial application. In the automotive domain, DHM has become a commonly used tool in virtual prototyping and human-centred product design. While this generation of DHM supports the ergonomic evaluation of new vehicle design during early design stages of the product, by modelling anthropometry, posture, motion or predicting discomfort, the future of DHM will be dominated by CAE methods, realistic 3D design, and musculoskeletal and soft tissue modelling down to the micro-scale of molecular activity within single muscle fibres. As a driving force for DHM development, the automotive industry has traditionally used human models in the manufacturing sector (production ergonomics, e.g. assembly) and the engineering sector (product ergonomics, e.g. safety, packaging). In product ergonomics applications, DHM share many common characteristics, creating a unique subset of DHM. These models are optimised for a seated posture, interface to a vehicle seat through standardised methods and provide linkages to vehicle controls. As a tool, they need to interface with other analytic instruments and integrate into complex CAD/CAE environments. Important aspects of current DHM research are functional analysis, model integration and task simulation. Digital (virtual, analytic) prototypes or digital mock-ups (DMU) provide expanded support for testing and verification and consider task-dependent performance and motion. Beyond rigid body mechanics, soft tissue modelling is evolving to become standard in future DHM. When addressing advanced issues beyond the physical domain, for example anthropometry and biomechanics, modelling of human behaviours and skills is also integrated into DHM. Latest developments include a more comprehensive approach through implementing perceptual, cognitive and performance models, representing human behaviour on a non-physiologic level. Through integration of algorithms from the artificial intelligence domain, a vision of the virtual human is emerging.

On-line film distribution : Its history and global complexion

‘Nobody knows anything’, said William Goldman of studio filmmaking. The rule is ever more apt as we survey the radical changes that digital distribution, along with the digitisation of production and exhibition, is wreaking on global film circulation. Digital Disruption: Cinema Moves On-line helps to make sense of what has happened in the short but turbulent history of on-line distribution. It provides a realistic assessment of the genuine and not-so-promising methods that have been tried to address the disruptions that moving from ‘analogue dollars’ to ‘digital cents’ has provoked in the film industry. Paying close attention to how the Majors have dealt with the challenges – often unsuccessfully – it focuses as much attention on innovations and practices outside the mainstream. Throughout, it is alive to, and showcases, important entrepreneurial innovations such as Mubi, Jaman, Withoutabox and IMDb. Written by leading academic commentators that have followed the fortunes of world cinema closely and passionately, as well as experienced hands close to the fluctuating fortunes of the industry, Digital Disruption: Cinema Moves On-line is an indispensable guide to great changes in film and its audiences.

Using virtual reality modelling in cultural management, archiving and research

This paper outlines how the Ortelia project’s 3D virtual reality models have the capacity to assist our understanding of sites of cultural heritage. The VR investigation of such spaces can be a valuable tool in 'real world' empirical research in theatre and spatiality. Through a demonstration of two of Ortelia's VR models (an art gallery and a theatre), we suggest how we might consider interpreting cultural space and sites as contributing significantly to cultural capital. We also introduce the potential for human interaction in such venues through motion-capture to discuss the potential for assessing how humans interact in such contexts.

Reflections around artefacts : using a deliberative approach to teaching reflective practices in fashion studies

While requiring students to think reflectively is a desirable teaching goal, it is often fraught with complexity and is sometimes poorly implemented in higher education. In this paper, we describe an approach to academic reflective practices that fitted a design subject in fashion education and was perceived as effective in enhancing student learning outcomes. In many design-based disciplines, it is essential to evaluate, through a reflective lens, the quality of tangible design outcomes - referred to here as artefacts. Fashion studio based practice (unlike many other theory based disciplines)requires an artefact to be viewed in order to initiate the reflective process. This reflection is not solely limited to reflective writing; the reflection happens through sight, touch and other non-traditional approaches. Fashion students were asked to reflect before, during and after the development of an artefact. Through a variety of media, a review of the first garment prototype - called a Sample Review - occurred. The reflective practices of students during the Sample Review provided a valuable insight into their own learning, as well as a valid assessment indicator for the lecturer. It also mirrored industry practices for design evaluation. We believe that this deliberative approach, characterised by artefact-prompted reflection, has wide applicability across undergraduate courses in a variety of discipline areas.

Wind-energy based path planning for electric unmanned aerial vehicles using Markov Decision Processes

Exploiting wind-energy is one possible way to ex- tend flight duration for Unmanned Arial Vehicles. Wind-energy can also be used to minimise energy consumption for a planned path. In this paper, we consider uncertain time-varying wind fields and plan a path through them. A Gaussian distribution is used to determine uncertainty in the Time-varying wind fields. We use Markov Decision Process to plan a path based upon the uncertainty of Gaussian distribution. Simulation results that compare the direct line of flight between start and target point and our planned path for energy consumption and time of travel are presented. The result is a robust path using the most visited cell while sampling the Gaussian distribution of the wind field in each cell.

Reducing Actuator Switchings for Motion Control of Autonomous Underwater Vehicles

A priority when designing control strategies for autonomous underwater vehicles is to emphasize their cost of implementation on a real vehicle. Indeed, due to the vehicles' design and the actuation modes usually under consideration for underwater plateforms the number of actuator switchings must be kept to a small value to insure feasibility and precision. This is the main objective of the algorithm presented in this paper. The theory is illustrated on two examples, one is a fully actuated underwater vehicle capable of motion in six-degrees-of freedom and one is minimally actuated with control motions in the vertical plane only.

Controlling Minimally-Actuated Vehicles for Applications in Ocean Observation

Establishing a persistent presence in the ocean with an AUV to observe temporal variability of large-scale ocean processes requires a unique sensor platform. In this paper, we propose a strategy that utilizes ocean model predictions to increase the autonomy and control of Lagrangian or profiling floats for precisely this purpose. An A* planner is applied to a local controllability map generated from predictions of ocean currents to compute a path between prescribed waypoints that has the highest likelihood of successful execution. The control to follow the planned path is computed by use of a model predictive controller. This controller is designed to select the best depth for the vehicle to exploit ambient currents to reach the goal waypoint. Mission constraints are employed to simulate a practical data collection mission. Results are presented in simulation for a mission off the coast of Los Angeles, CA USA, and show surprising results in the ability of a Lagrangian float to reach a desired location.

Options for the development of the New Zealand Law of Charities

The Australian Centre for Philanthropy and Nonprofit Studies was briefed to advise the Charities Commission of New Zealand on ways in which the law of charity might be developed. The substantive issue underpinning the brief is a need to enable charity law in New Zealand to continue to develop in accordance with the societal values of New Zealand. This is an options paper and as such it does not explain the current law, but is intended to generate constructive discussion. Four options are sketched, with important issues and implications for each. No recommendation is made to adopt a particular option; there are strengths and weaknesses, opportunities and threats with each of the four approaches canvassed.

Critical time scales for advection–diffusion–reaction processes

The concept of local accumulation time (LAT) was introduced by Berezhkovskii and coworkers in 2010–2011 to give a finite measure of the time required for the transient solution of a reaction–diffusion equation to approach the steady–state solution (Biophys J. 99, L59 (2010); Phys Rev E. 83, 051906 (2011)). Such a measure is referred to as a critical time. Here, we show that LAT is, in fact, identical to the concept of mean action time (MAT) that was first introduced by McNabb in 1991 (IMA J Appl Math. 47, 193 (1991)). Although McNabb’s initial argument was motivated by considering the mean particle lifetime (MPLT) for a linear death process, he applied the ideas to study diffusion. We extend the work of these authors by deriving expressions for the MAT for a general one–dimensional linear advection–diffusion–reaction problem. Using a combination of continuum and discrete approaches, we show that MAT and MPLT are equivalent for certain uniform–to-uniform transitions; these results provide a practical interpretation for MAT, by directly linking the stochastic microscopic processes to a meaningful macroscopic timescale. We find that for more general transitions, the equivalence between MAT and MPLT does not hold. Unlike other critical time definitions, we show that it is possible to evaluate the MAT without solving the underlying partial differential equation (pde). This makes MAT a simple and attractive quantity for practical situations. Finally, our work explores the accuracy of certain approximations derived using the MAT, showing that useful approximations for nonlinear kinetic processes can be obtained, again without treating the governing pde directly.

The Corio Oval tribe: Geelong Football Club in colonial times

Geelong, Victoria’s second city, has an AFL football club whose culture and identity is closely tied to the city itself. An analysis of its playing group for the colonial period demonstrates that this local tribalism began early. As football became professionalised towards the end of the nineteenth century, country Victoria lost power in relative terms to metropolitan Melbourne: for example, Ballarat’s three main clubs lost their senior status. But Geelong, with its one remaining senior club, prospered and was admitted to the VFL ranks in 1897. The Geelong players were the sons and nephews of the Western District squattocracy and so had access to networks of power and influence. Many attended the prestigious Geelong Grammar School and the worthy Geelong College (in surprisingly equal numbers). They pursued careers both on the land and in professional roles, and maintained the social connections they had built through the club and other local institutions. Despite their elite standing, however, they continued to be regarded by the supporter base as an embodiment of the city and a defence against the city’s Melbourne critics that Geelong was a mere ‘sleepy hollow’.

A continuum model of the growth of engineered epidermal skin substitutes

We present a porous medium model of the growth and deterioration of the viable sublayers of an epidermal skin substitute. It consists of five species: cells, intracellular and extracellular calcium, tight junctions, and a hypothesised signal chemical emanating from the stratum corneum. The model is solved numerically in Matlab using a finite difference scheme. Steady state calcium distributions are predicted that agree well with the experimental data. Our model also demonstrates epidermal skin substitute deterioration if the calcium diffusion coefficient is reduced compared to reported values in the literature.

Becoming a 'Bastion Against Tyranny' : Australian legal education and the government of the self

Research into legal education suggests that many students enter law school with ideals about using the law to achieve social change, but graduate with some cynicism regarding these ideals. It is often argued that law schools provide a negative, competitive, and conservative environment for students, pushing many away from social justice ideals towards more self-interested, vocational concerns. This article uses Michel Foucault’s work on the government of the self to suggest another way of understanding this process. It examines a range of prescriptive texts that provide students with advice about how to study law and ‘survive’ law school. In doing so, it posits that this apparent loss of social ideals does not necessarily always signify that the student has become politically conservative or has had a negative educational experience. While these legal personae may appear outwardly conservative, and indeed still reflect particular gendered or raced perspectives, by examining the messages that these texts offer students, this article suggests that an apparent loss of social ideals can be the result of a productive shaping of the self. The legal persona they fashion can incorporate social justice ideals and necessitate specific ways of acting on those ideals. This analysis adds to the growing body of research that uses Foucault’s work to rethink common narratives of power and the shaping of the self in legal education, and provides legal educators with new ways of reflecting on the effects of legal education.

Wikileaks and the challenge of the “Fifth Estate”

The Time magazine ‘Person of theYear’ award is a venerable institution. Established by Time’s founder Henry Luce in 1927 as ‘Man of the Year’, it is an annual award given to ‘a person, couple, group, idea, place, or machine that ‘for better or for worse ... has done the most to influence the events of the year’ (Time 2002, p. 1). In 2010, the award was given to Mark Zuckerberg, the founder and CEO of the social networking site Facebook.There was, however, a strong campaign for the ‘People’s Choice’ award to be given to Julian Assange, the founder and editor-in-chief of Wikileaks, the online whistleblowing site. Earlier in the year Wikileaks had released more than 250 000 US government diplomatic cables through the internet, and the subsequent controver- sies around the actions of Wikileaks and Assange came to be known worldwide as ‘Cablegate’. The focus of this chapter is not on the implications of ‘Cablegate’ for international diplomacy, which continue to have great significance, but rather upon what the emergence of Wikileaks has meant for journalism, and whether it provides insights into the future of journalism. Both Facebook and Wikileaks, as well as social media platforms such as Twitter and YouTube, and independent media practices such as blogging, citizen journalism and crowdsourcing, are manifestations of the rise of social media, or what has also been termed web 2.0.The term ‘web 2.0’ was coined by Tim O’Reilly, and captures the rise of online social media platforms and services, that better realise the collaborative potential of digitally networked media. They do this by moving from the relatively static, top-down notions of interactivity that informed early internet development, towards more open and evolutionary models that better harness collective intelligence by enabling users to become the creators and collaborators in the development of online media content (Musser and O’Reilly 2007; Bruns 2008).

Legal education and the 'idealistic student': using Foucault to unpack the critical legal narrative

It appears that few of the students holding ‘socially idealistic’ goals upon entering law school actually maintain these upon graduation. The critical legal narrative, which explains and seeks to act upon this shift in the graduate’s ‘legal identity’, posits that these ideals are repressed through power relations that create passive receptacles into which professional ideologies can be deposited, in the interests of those advantaged by the social and legal status quo. Using the work of Michel Foucault, this paper unpacks the assumptions underpinning this narrative, particularly its arguments about ideology, power, and the subject. In doing so, it will argue this narrative provides an untenable basis for political action within legal education. By interrogating this narrative, this paper provides a new way of understanding the construction of the legal identity through legal education, and a new basis for political action within law school.