Using serial bluetooth converters as a sensor link in networked control systems

Networked control systems (NCS) are distributed control system in which sensors, actuators and controllers are physically separated and connected through communication networks. NCS represent the evolution of networked control architectures providing greater modularity and control decentralization, ease maintenance and diagnosis and lower cost of implementation. A recent trend in this research topic is the development of NCS using wireless networks which enable interoperability between existing wired and wireless systems. This paper presents the feasibility analysis of using a serial RS-232 to Bluetooth converter as a wireless sensor link in NCS. In order to support this investigation, relevant performance metrics for wireless control applications such as jitter, time delay and messages lost are highlighted and calculated to evaluate the converter capabilities. In addition the control performance of an implemented motor control system using the converter is analyzed. Experimental results led to the conclusion that serial RS-232 Bluetooth converters can be used to implement wireless networked control systems (WNCS) providing transmission rates and closed control loop times which are acceptable for NCS applications. © 2011 IEEE.

Networked control system for the guidance of a four-wheel steering agricultural robotic platform

A current trend in the agricultural area is the development of mobile robots and autonomous vehicles for precision agriculture (PA). One of the major challenges in the design of these robots is the development of the electronic architecture for the control of the devices. In a joint project among research institutions and a private company in Brazil a multifunctional robotic platform for information acquisition in PA is being designed. This platform has as main characteristics four-wheel propulsion and independent steering, adjustable width, span of 1,80m in height, diesel engine, hydraulic system, and a CAN-based networked control system (NCS). This paper presents a NCS solution for the platform guidance by the four-wheel hydraulic steering distributed control. The control strategy, centered on the robot manipulators control theory, is based on the difference between the desired and actual position and considering the angular speed of the wheels. The results demonstrate that the NCS was simple and efficient, providing suitable steering performance for the platform guidance. Even though the simplicity of the NCS solution developed, it also overcame some verified control challenges in the robot guidance system design such as the hydraulic system delay, nonlinearities in the steering actuators, and inertia in the steering system due the friction of different terrains. Copyright © 2012 Eduardo Pacincia Godoy et al.

Evaluating serial ZigBee devices for application in wireless networked control systems

Networked control systems (NCS) are distributed control system where the sensors, actuators and controllers are physically separated and connected through communication networks. NCS represent the evolution of networked control architectures providing greater modularity and control decentralization, ease maintenance and diagnosis and lower cost of implementation. A recent trend in this research topic is the development of NCS using wireless networks (WNCS) enabling interoperability between existing wired and wireless systems. This paper evaluates a serial RS-232 ZigBee device as a wireless sensor link in NCS. In order to support this investigation, relevant performance metrics for wireless control applications such as jitter, time delay and messages lost are highlighted and calculated to evaluate the device capabilities. In addition the control performance of an implemented motor control system using the device is analyzed. Experimental results led to the conclusion that serial RS-232 ZigBee devices can be used to implement WNCS and the use of this device delay information in the PID controller discretization can improve the control performance of the system. © 2012 IEEE.

Robust control applied to power flow control in single-phase inverter with LCL filter, using droop control and D-stability

This paper proposes a new methodology to control the power flow between a distributed generator (DG) and the electrical power distribution grid. It is used the droop voltage control to manage the active and reactive power. Through this control a sinusoidal voltage reference is generated to be tracked by voltage loop and this loop generates the current reference for the current loop. The proposed control introduces feed-forward states improving the control performance in order to obtain high quality for the current injected to the grid. The controllers were obtained through the linear matrix inequalities (LMI) using the D-stability analysis to allocate the closed-loop controller poles. Therefore, the results show quick transient response with low oscillations. Thus, this paper presents the proposed control technique, the main simulation results and a prototype with 1000VA was developed in the laboratory in order to demonstrate the feasibility of the proposed control. © 2012 IEEE.

Alternatives for controlling urban traffic congestion

Traffic congestion is nothing new in Latin American cities but has worsened in recent years. Eliminating it is a pipedream, but it should be brought under control. Many economists and transport planners think electronic road pricing would be the best way of tackling it, now that the appropriate technology for implementing it is available. On the other hand, experience shows that, for political reasons, it would be better to begin by adopting simpler methods. To start with, simple road pricing would seem to be the best option. But, over 20 years of experience in London and more than six in Santiago, Chile, made it clear that socio-political barriers have to be surmounted before even this option can be applied in practice. There is more political support for measures to control parking, due in part to the fact that the legal powers do not normally extend to restricting the number of parking spaces available to high-income and influential motorists who have the right to park near their offices and who cause a great deal of the congestion whilst getting there. In Latin America, the relative importance of taxis also diminishes the effectiveness of measures geared to parking, since taxis contribute to congestion although but they do not park. The problem of congestion cannot be solved by using tame measures. The time has come for something bolder, i.e., measures that, at the very least, exercise control over those parking spaces, which so far have been beyond the reach of governments and local authorities, ideally, simple road pricing systems would be even more effective.

Traffic congestion: the problem and how to tackle it

As the culmination of a project financed by the Technical Cooperation Agency of the Federal Republic of Germany (GTZ), ECLAC has just published Congestión de tránsito - El problema y cómo enfrentarlo, Cuadernos de la Cepal series, No. 87. The text of 194 pages analyses the negative impacts of congestion and the multidisciplinary efforts that are needed to keep it under control, through the design of appropriate policies and measures. Congestion control is part of the development of a strategic vision of how a city should develop which can make it possible to harmonize the needs of mobility, growth and competitiveness, which are so necessary today and in the future, with the sustainability of cities and the improvement of their quality of life.The task is complex and it is not easy to find appropriate solutions. The present publication presents tools for tackling this crucial problem. Everything indicates that it calls for high professional and leadership qualities on the part of the authorities, and that it must have the active support of the citizens.This edition of the Bulletin presents a summary of the main conclusions of the publication and it is stressed that ECLAC can conduct local workshops to analyze the problem and how to tackle it.

Traffic congestion: the problem and how to deal with it

The text of 194 pages analyses the negative impacts of congestion and the multidisciplinary efforts that are needed to keep it under control, through the design of appropriate policies and measures. Congestion control is part of the development of a strategic vision of how a city should develop which can make it possible to harmonize the needs of mobility, growth and competitiveness, which are so necessary today and in the future, with the sustainability of cities and the improvement of their quality of life.The task is complex and it is not easy to find appropriate solutions. The present publication presents tools for tackling this crucial problem. Everything indicates that it calls for high professional and leadership qualities on the part of the authorities, and that it must have the active support of the citizens.This edition of the Bulletin presents a summary of the main conclusions of the publication and it is stressed that ECLAC can conduct local workshops to analyze the problem and how to tackle it.

Energy Management and Control for Islanded Microgrid Using Multi-Agents

This paper presents a multi-agent system for real-time operation of simulated microgrid using the Smart-Grid Test Bed at Washington State University. The multi-agent system (MAS) was developed in JADE (Java Agent DEvelopment Framework) which is a Foundation for Intelligent Physical Agents (FIPA) compliant open source multi-agent platform. The proposed operational strategy is mainly focused on using an appropriate energy management and control strategies to improve the operation of an islanded microgrid, formed by photovoltaic (PV) solar energy, batteries and resistive and rotating machines loads. The focus is on resource management and to avoid impact on loads from abrupt variations or interruption that changes the operating conditions. The management and control of the PV system is performed in JADE, while the microgrid model is simulated in RSCAD/RTDS (Real-Time Digital Simulator). Finally, the outcome of simulation studies demonstrated the feasibility of the proposed multi-agent approach for real-time operation of a microgrid.

Use of live oocyst vaccine in the control of turkey coccidiosis: Effect on performance and intestinal morphology

An experiment was conducted to determine the effects of different coccidiosis-preventing programs on performance and intestinal morphology of commercial turkeys. Three hundred fifteen1-d-old female commercial cross turkey poults (British United Turkeys, BUT Big 9) were distributed into 3 treatments with 5 replicates of 21 birds each. Three programs were evaluated from 1 to 70 d of age, where program 1 had no anticoccidial drug and no vaccination against coccidiosis; program 2 had an anticoccidial drug (maduramycin 1%, 5 ppm); and program 3 had a vaccination (commercial vaccine, 4 species of Eimeria). All the groups were challenged with a dose of oocysts sporulated (20,000/bird) of 2 species of Eimeria at 21 d of age. In the growing phase (d 0-28), BW, BW gain, and FCR were significantly greater in treated groups compared with control group. In the fattening phase, the performance was not affected by treatments. Treatments and coccidiosis challenge had no significant effects on intestinal villus height. These observations support other reports that confirm live oocyst vaccination can be used effectively as a preventive against avian coccidiosis in commercially reared turkeys.

Application of Cymbopogon winterianus Jowitt and Azadirachta indica A. Juss in the control of Rhipicephalus (Boophilus) microplus

Parasitism constitutes one of the main problems that affect livestock. Commercial acaricides have been used to control tick, but these chemicals have been responsible for the development of drug resistance and residues in the environment. Changes in the concept of production determined the search for natural measures, which guarantees animal sanity along with safety of the produced food. This assay had as objective to evaluate the citronella oil and neem oil in the control of bovine ticks. By the technique of adult ticks immersion, 280 ticks were evaluated, distributed in equal number throughout four treatments: negative control group, positive control (ivermectin), neem oil and citronella oil. It was analyzed the mortality index, estimated reproduction, product efficiency, index of eggs production and the hatchability rate. The efficiency of the product was verified by the mortality index just for the positive control group (100%) and citronella oil (97.14%). Also, the citronella oil inhibited the eclosion of eggs in 100%. The other treatments did not presented the minimum eclosion inhibition level of 95%. Under the conditions of the present assay citronella oil was efficient against Rhipicephalus (Boophilus) microplus. This result was not observed in relation to the neem oil.

Multi-task control strategy for grid-tied inverters based on conservative power theory

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Colombian results of the interlaboratory quality control exercise 2009 2010

Colombian Reference National Laboratory, GENES LTDA, have organized and coordinated for the past two years (2009 and 2010) the Quality Control Exercise for laboratories undertaking paternity, maternity and forensic tests with DNA markers. Twenty-two laboratories have participated in 2009, increasing the number to 27 in 2010. Laboratories in Colombia, Brazil, Ecuador, Peru, Dominican Republic and Panama have participated in these exercises. There have been some similarities in the two controls: A practical exercise, three blood samples on FTA cards were sent to each participating laboratory to be genotyped for DNA markers using the routine methodologies in their laboratories; theoretical exercises including optional and obligatory cases. For the theoretical exercises, the participating laboratories should calculate the partial and final PI or BRI (Biological Relationship Index or Paternity Index). Forty-nine and 52 markers were under consensus for 2009 and 2010, respectively, distributed in autosomal, Y and X chromosomes STR. With respect to 2008, 12 and 15 additional markers were under consensus for 2009 and 2010, respectively. The rate of reporting error was 2.9% in 2009 while in 2010, 4.7% error was reported. The Proficiency Test conducted through the Colombian National Reference Laboratory has become a useful tool for quality assurance of all Colombian laboratories and some of Latin America that do DNA testing to establish biological relationships and an excellent opportunity for ongoing training of experts from the region.

Leveraging wireless devices for networked control systems in industrial applications

Networked control systems (NCSs) are distributed control system in which sensors, actuators and controllers are physically separated and connected through communication networks. NCS represent the evolution of networked control architectures providing greater modularity and control decentralization, ease maintenance and diagnosis and lower cost of implementation. A recent trend in this research topic is the development of NCS using wireless networks(WNCS)which enable interoperability between existing wiredand wireless systems. This paper presents the feasibility analysis of using serial to wireless converter as a wireless sensor link in NCS. In order to support this investigation, relevant performance metrics for wireless control applications such as jitter, time delay and messages lost are highlighted and calculated to evaluate the wireless converter capabilities. In addition the control performance of an implemented motor control system using the converter is analyzed. Experimental results led to the conclusion that serial ZigBee device isrecommended against the Bluetooth as it provided better metrics for control applications. However, bothdevices can be used to implement WNCS providing transmission rates and closed control loop times which are acceptable for NCS applications.Moreoverthe use of thewireless device delay in the PID controller discretization can improve the control performance of the system.

Co-simulation tools for networked control systems: revision and utilization

Networked control systems (NCSs) are distributed control systems in which the sensors, actuators, and controllers are physically separated and connected through an industrial network. The main challenge related to the development of NCSs is the degenerative effects caused by the inclusion of this communication network in the closed loop control. In order to mitigate these effects, co-simulation tools for NCS have been developed to study the network influence in the NCS. This paper presents a revision about co-simulation tools for NCS and the application of two of these tools for the design and evaluation of NCSs. The TrueTime and Jitterbug tools were used together to evaluate the main configuration parameter that affects the performance of CAN-based NCS and to verify the NCS quality of control under various timing conditions including different transmission period of messages and network delays. Therefore, the simulation results led to the conclusion that despite the transmission period of messages is the most significant factor among the analyzed in the design of NCS, its influence is related to the kind of system with greater effects in NCSs with fast dynamics.

Providing Reliable Data Transport for Dynamic Event Sensing in Wireless Sensor Networks

In this paper, we propose a Loss Tolerant Reliable (LTR) data transport mechanism for dynamic Event Sensing (LTRES) in WSNs. In LTRES, a reliable event sensing requirement at the transport layer is dynamically determined by the sink. A distributed source rate adaptation mechanism is designed, incorporating a loss rate based lightweight congestion control mechanism, to regulate the data traffic injected into the network so that the reliability requirement can be satisfied. An equation based fair rate control algorithm is used to improve the fairness among the LTRES flows sharing the congestion path. The performance evaluations show that LTRES can provide LTR data transport service for multiple events with short convergence time, low lost rate and high overall bandwidth utilization.