Strain dependent microstructural modifications of BiCrO3 epitaxial thin films

Strain-dependent microstructural modifications were observed in epitaxial BiCrO3 (BCO) thin films fabricated on single crystalline substrates, utilizing pulsed laser deposition. The following conditions were employed to modify the epitaxial-strain: (i) in-plane tensile strain, BCOSTO [BCO grown on buffered SrTiO3 (001)] and in-plane compressive strain, BCONGO [BCO grown on buffered NdGaO3 (110)] and (ii) varying BCO film thickness. A combination of techniques like X-ray diffraction, X-ray photoelectron spectroscopy (XPS) and high resolution transmission electron microscopy (TEM) was used to analyse the epitaxial growth quality and the microstructure of BCO. Our studies revealed that in the case of BCOSTO, a coherent interface with homogeneous orthorhombic phase is obtained only for BCO film with thicknesses, d < 50 nm. All the BCOSTO films with d = 50 nm were found to be strain-relaxed with an orthorhombic phase showing 1/2 <100> and 1/4 <101> satellite reflections, the latter oriented at 45° from orthorhombic diffraction spots. High angle annular dark field scanning TEM of these films strongly suggested that the satellite reflections, 1/2 <100> and 1/4 <101>, originate from the atomic stacking sequence changes (or “modulated structure”) as reported for polytypes, without altering the chemical composition. The unaltered stoichiometry was confirmed by estimating both valency of Bi and Cr cations by surface and in-depth XPS analysis as well as the stoichiometric ratio (1 Bi:1 Cr) using scanning TEM–energy dispersive X-ray analysis. In contrast, compressively strained BCONGO films exhibited monoclinic symmetry without any structural modulations or interfacial defects, up to d ~ 200 nm. Our results indicate that both the substrate-induced in-plane epitaxial strain and the BCO film thickness are the crucial parameters to stabilise a homogeneous BCO phase in an epitaxially grown film.

Identification of Gene Expression-Based Prognostic Markers in the Hematopoietic Stem Cells of Patients With Myelodysplastic Syndromes

The diagnosis of patients with myelodysplastic syndromes (MDS) is largely dependent on morphologic examination of bone marrow aspirates. Several criteria that form the basis of the classifications and scoring systems most commonly used in clinical practice are affected by operator-dependent variation. To identify standardized molecular markers that would allow prediction of prognosis, we have used gene expression profiling (GEP) data on CD34+ cells from patients with MDS to determine the relationship between gene expression levels and prognosis.

Comment on "On the Uniqueness of Stable Marriage Matchings" [Economic Letters 69(1):1-8, 2000]

We prove with the help of a counterexample that Lemma 6 and Corollary 7 from Eeckhout [1] are incorrect.

Designing and understanding permanent microporosity in liquids

Standard microporous materials are typically crystalline solids that exhibit a regular array of cavities of uniform size and shape. Packing and directional bonding between molecular building blocks give rise to interstitial pores that confer size and shape-specific sorption properties to the material. In the liquid state interstitial cavities are transient. However, permanent and intrinsic "pores'' can potentially be built into the structure of the molecules that constitute the liquid. With the aid of computer simulations we have designed, synthesised and characterised a series of liquids composed of hollow cage-like molecules, which are functionalised with hydrocarbon chains to make them liquid at accessible temperatures. Experiments and simulations demonstrate that chain length and size of terminal chain substituents can be used to tune, within certain margins, the permanence of intramolecular cavities in such neat liquids. Simulations identify a candidate "porous liquid'' in which 30% of the cages remain empty in the liquid state. Absorbed methane molecules selectively occupy these empty cavities.

Defining the role of common variation in the genomic and biological architecture of adult human height

Using genome-wide data from 253,288 individuals, we identified 697 variants at genome-wide significance that together explained one-fifth of the heritability for adult height. By testing different numbers of variants in independent studies, we show that the most strongly associated 1/42,000, 1/43,700 and 1/49,500 SNPs explained 1/421%, 1/424% and 1/429% of phenotypic variance. Furthermore, all common variants together captured 60% of heritability. The 697 variants clustered in 423 loci were enriched for genes, pathways and tissue types known to be involved in growth and together implicated genes and pathways not highlighted in earlier efforts, such as signaling by fibroblast growth factors, WNT/I 2-catenin and chondroitin sulfate-related genes. We identified several genes and pathways not previously connected with human skeletal growth, including mTOR, osteoglycin and binding of hyaluronic acid. Our results indicate a genetic architecture for human height that is characterized by a very large but finite number (thousands) of causal variants.

Genetic studies of body mass index yield new insights for obesity biology

Obesity is heritable and predisposes to many diseases. To understand the genetic basis of obesity better, here we conduct a genome-wide association study and Metabochip meta-analysis of body mass index (BMI), a measure commonly used to define obesity and assess adiposity, in up to 339,224 individuals. This analysis identifies 97 BMI-associated loci (P < 5 × 10(-8)), 56 of which are novel. Five loci demonstrate clear evidence of several independent association signals, and many loci have significant effects on other metabolic phenotypes. The 97 loci account for ∼2.7% of BMI variation, and genome-wide estimates suggest that common variation accounts for >20% of BMI variation. Pathway analyses provide strong support for a role of the central nervous system in obesity susceptibility and implicate new genes and pathways, including those related to synaptic function, glutamate signalling, insulin secretion/action, energy metabolism, lipid biology and adipogenesis.

Poem translation: 'How Many Shady Abodes'. Host publication: 'Il filo della vita-The thread of life-Snáithe na beatha' (ed. A. Gentili)

Poem

Abundant genetic overlap between blood lipids and immune-mediated diseases indicates shared molecular genetic mechanisms

Epidemiological studies suggest a relationship between blood lipids and immune-mediated diseases, but the nature of these associations is not well understood. We used genome-wide association studies (GWAS) to investigate shared single nucleotide polymorphisms (SNPs) between blood lipids and immune-mediated diseases. We analyzed data from GWAS (n~200,000 individuals), applying new False Discovery Rate (FDR) methods, to investigate genetic overlap between blood lipid levels [triglycerides (TG), low density lipoproteins (LDL), high density lipoproteins (HDL)] and a selection of archetypal immune-mediated diseases (Crohn's disease, ulcerative colitis, rheumatoid arthritis, type 1 diabetes, celiac disease, psoriasis and sarcoidosis). We found significant polygenic pleiotropy between the blood lipids and all the investigated immune-mediated diseases. We discovered several shared risk loci between the immune-mediated diseases and TG (n = 88), LDL (n = 87) and HDL (n = 52). Three-way analyses differentiated the pattern of pleiotropy among the immune-mediated diseases. The new pleiotropic loci increased the number of functional gene network nodes representing blood lipid loci by 40%. Pathway analyses implicated several novel shared mechanisms for immune pathogenesis and lipid biology, including glycosphingolipid synthesis (e.g. FUT2) and intestinal host-microbe interactions (e.g. ATG16L1). We demonstrate a shared genetic basis for blood lipids and immune-mediated diseases independent of environmental factors. Our findings provide novel mechanistic insights into dyslipidemia and immune-mediated diseases and may have implications for therapeutic trials involving lipid-lowering and anti-inflammatory agents.

Forebrain ependymal cells are Notch-dependent and generate neuroblasts and astrocytes after stroke

Neurons are continuously generated from stem cells in discrete regions in the adult mammalian brain. We found that ependymal cells lining the lateral ventricles were quiescent and did not contribute to adult neurogenesis under normal conditions in mice but instead gave rise to neuroblasts and astrocytes in response to stroke. Ependymal cell quiescence was actively maintained by canonical Notch signaling. Inhibition of this pathway in uninjured animals allowed ependymal cells to enter the cell cycle and produce olfactory bulb neurons, whereas forced Notch signaling was sufficient to block the ependymal cell response to stroke. Ependymal cells were depleted by stroke and failed to self-renew sufficiently to maintain their own population. Thus, although ependymal cells act as primary cells in the neural lineage to produce neurons and glial cells after stroke, they do not fulfill defining criteria for stem cells under these conditions and instead serve as a reservoir that is recruited by injury.

Liquids with permanent porosity

Porous solids such as zeolites and metal-organic frameworks are useful in molecular separation and in catalysis, but their solid nature can impose limitations. For example, liquid solvents, rather than porous solids, are the most mature technology for post-combustion capture of carbon dioxide because liquid circulation systems are more easily retrofitted to existing plants. Solid porous adsorbents offer major benefits, such as lower energy penalties in adsorption-desorption cycles, but they are difficult to implement in conventional flow processes. Materials that combine the properties of fluidity and permanent porosity could therefore offer technological advantages, but permanent porosity is not associated with conventional liquids. Here we report free-flowing liquids whose bulk properties are determined by their permanent porosity. To achieve this, we designed cage molecules that provide a well-defined pore space and that are highly soluble in solvents whose molecules are too large to enter the pores. The concentration of unoccupied cages can thus be around 500 times greater than in other molecular solutions that contain cavities, resulting in a marked change in bulk properties, such as an eightfold increase in the solubility of methane gas. Our results provide the basis for development of a new class of functional porous materials for chemical processes, and we present a one-step, multigram scale-up route for highly soluble 'scrambled' porous cages prepared from a mixture of commercially available reagents. The unifying design principle for these materials is the avoidance of functional groups that can penetrate into the molecular cage cavities.

The timing and spatiotemporal patterning of Neanderthal disappearance

ThetimingofNeanderthal disappearanceandtheextent to whichthey overlapped with the earliest incoming anatomically modern humans (AMHs)inEurasia arekey questions inpalaeoanthropology1,2 .Deter- mining the spatiotemporal relationship between the two populations is crucial if we are to understand the processes, timing and reasons leading to the disappearance of Neanderthals and the likelihood of cultural and genetic exchange. Serious technical challenges, however, havehinderedreliable datingof the period,as theradiocarbonmethod reaches its limit at 50,000 years ago3 .Herewe apply improved accel- erator mass spectrometry 14C techniques to construct robust chro- nologies from 40 key Mousterian and Neanderthal archaeological sites, ranging fromRussia toSpain.Bayesianagemodellingwas used togenerate probability distributionfunctions todetermine the latest appearancedate.Weshowthat theMousterianendedby41,030–39,260 calibratedyears BP(at95.4%probability) acrossEurope.Wealsodem- onstrate that succeeding ‘transitional’ archaeological industries, one ofwhich has beenlinked withNeanderthals (Cha ˆtelperronian)4 ,end at a similar time. Our data indicate that the disappearance of Nean- derthals occurred at different times in different regions.Comparing the data with results obtained fromthe earliest datedAMHsites in Europe, associated with the Uluzzian technocomplex5 , allows us to quantify the temporal overlap between the two human groups. The results revealasignificantoverlap of 2,600–5,400years (at 95.4%prob- ability).This hasimportant implications formodels seeking toexplain the cultural, technological and biological elements involved in the replacement of Neanderthals byAMHs.Amosaic of populations in Europe during the Middle to Upper Palaeolithic transition suggests that there was ample time for the transmission of cultural and sym- bolic behaviours, as well as possible genetic exchanges, between the two groups.

Proyecto de Factibilidad para la creación de una empresa dedicada a la elaboración de papel a base del pinzote de banano, ubicado en el sector Rumicucho, parroquia San Antonio de Pichincha, Canctón Quito. Provincia de Pichincha.

El presente trabajo investigativo contiene cinco capítulos los cuales están ordenados en una forma secuencial y lógica para el entendimiento de los lectores. El Capítulo I, es el Estudio de Mercado, en el cual como método de investigación se utilizo la encuesta, para conocer la cantidad de personas que requieren adquirí el producto, sus necesidades, además de indagar en las ofertas existentes, las tendencias que tienen estos, para de esta manera saber en qué mercado queremos incursionar y cuál sería la oferta que podemos presentar. El Capítulo II, es el Estudio de Tamaño y Localización, se analizo factores de producción, maquinaria los que permiten conocer cuál es el tamaño óptimo de la planta, el tamaño de la maquinaria para de esta manera analizar la distribución espacial de la planta. La localización a pesar de conocerla, se analizó para saber las características con las que cuenta este lugar tanto como las falencias del mismo. El Capítulo III, es el Estudio de Ingeniería del Proyecto, este nos permitió conocer los recursos humanos, de infraestructura, materia prima, de equipos y maquinaria, que se necesitarán para la implementación de la planta, el costo que estos implican, para considerar la selección adecuada de los mismos. El Capítulo VI, Estudio Financiero, es el que permite establecer la factibilidad del proyecto de manera cuantitativa a través de la inversión que se realizará, los, costos, los ingresos, que permiten conocer la utilidad que genera el proyecto, además de analizar con métodos financieros la viabilidad de la empresa a base de sus resultados. El Capítulo V, Análisis Legal y Organizacional, establece las bases jurídicas tanto internas y externas que debe cumplir la empresa, desde su constitución y durante todo el horizonte del proyecto. En lo referente a la organización se estable la misión, visión, organigramas y la importancia del personal en la empresa.